A belt for a chamber for Champion grass Running how to use. Adjustment of the belt and handle of the benzotrimerra

A belt for a trimmer for grass from China. characteristic and design of the product, price, video

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

The exploitation of braids for grass is quite complicated without a number of additional accessories, including the cutting headset, as well as a shoulder belt and a casing that protects the operator’s legs from stones and herbs. Each of these devices plays an important role in the configuration of a trimmer for grass, so special attention should be paid to the study of their characteristics and choice.

Classification of the headset for trimming

Owners of local areas often use different knives and discs to care for the territory. Their main function. fight large weeds and old dried bushes. In most cases, manufacturers use the following materials for the manufacture of knives:

The knives of the trimmer for grass also differ in the type of cutting edges. The headset can have 4.8 or more teeth that are at the same height or one above the other. In addition, the blades have a carbide.melting tip or with holes inside the teeth.

The cutting set can also be made in the form of several blades or to have the shape of a solid disk to which strong metal teeth are attached.

The choice of a knife depending on the conditions of use

When choosing a cutting headset, you should pay attention to the material from which it is made. As a rule, metal gadgets are used to combat especially large weeds. However, plastic knives can handle most wild plants. In addition, the plastic has much less weight and greater elasticity, and the blades and discs of the trimmer for the grass create a lower load on the engine and the drive tool.

Assembly of a cultivator

If there is a cottage or just a land plot, then the cultivator will help facilitate soil processing. Traditionally, a chopper is used for these purposes, but working with it takes a lot of time and effort. The use of the cultivator will reduce labor costs, and the whole process will take a smaller time period. Factory.made equipment is expensive, therefore, with limited funds, the question arises about the independent assembly of the cultivator. For this, both gasoline trimmers for grass and electric cos are suitable for this.

To create a simple sample of technology, you should stock up on such tools and materials:

  • corner grinder with a set of disks (suitable diameter. 125 mm) for metal;
  • drill with drills of various diameters;
  • welding apparatus;
  • electrodes;
  • an electrician or a hacksaw for metal;
  • An emery machine with two abrasive circles of different granularity;
  • functioning gasoline trimmer;
  • forks;
  • pipe made of steel suitable in diameter for the shaft of motorcycles;
  • manual tools: keys, hammer, pliers, core, roulette and marker;
  • a sheet of metal with a thickness of 3 to 5 mm and a minimum of 1010 cm.

The manufacturing process begins with the working part. For this purpose, the curved rods of garden foriles will serve. Their recommended length is from 10 to 15 cm. this is enough to carry out loosening the soil.

The working nozzle is made in the following sequence:

  • The teeth of the forks are flattened to a width of 1 cm;
  • on the sandpaper, using a circle with a small abrasive, cutting cutters;
  • Using an electrician, a circle with a diameter of 10 cm is cut out of the metal;
  • process it on the emery machine until it reaches an almost perfect form;
  • At equal intervals, prepared mills are welded to the metal circle (recommended quantity. 3).

This is really a completely indestructible fishing line for a trimmer for a lawn mower.

With more than 3 pieces, the number of mills, the load on the equipment increases greatly.

The recommended power of the gasoline engine should be two horsepower (about 1.5 kW) or more.

At the next stage, it is necessary to attach the cutter for weeding for a trimmer for grass. The process is greatly simplified in the presence of a reverse thread located at the end of the shaft of the motorcycles, on which the manufactured working part is simply wound. To do this, a pipe with a nut is pre.welded to the cutter.

In the presence of locksmith experience and welder skills, redoing a trimmer for grass in a cultivator is quite simple. Financial costs at the same time insignificant. If the work is used in an electric hood, then you will need to think about the extension cord so that it takes out throughout the processed area.

https: // Fermerzag.ru/trimmey-I-Motokosy/Kak-Odet-Remen-Na-Trimme-Rys.html https: // hitech-online.ru/Tehnika-Dlya-Sada/Trimmer/Kak-Prikrepit-Remen.html https: // tehnika.Expert/Dlya-Sada/Trimmer/Chto-Mozhno-SDELAT-IZ.NEGO.HTML

Remont-Karbyuratora-Trimmera-Svoimi-Rukami-I recognize my car!

Under such conditions, it is possible to say about violations in the adjustment of the carburetor.

Since quite often saved money when buying a trimmer for grass will be able to turn into the need for frequent repairs or its full replacement with a new unit. It took 2 days to understand the scheme, but the repair itself took only 15 minutes.

Exchange of experience, entertaining and necessary about everything that has their own wheels for those who decided to organize their own business.

The necessary recommendations, needlework and descriptions of self.proofs with a photo of the house is home home, maintaining and life of the household. from choosing and cooking household appliances, to leaving and raising children for pets, a home.made snowman. Trimmers for grass. Lawn mowers.

Bishops and black cutters. Boil repairs with your own hands.

With all the thirst, the chainsaws cannot be attributed to difficult if there is no confidence and experience in their own abilities, the repair of the carburetor computers, the Internet about everything regarding computers, the Internet and office equipment active vacation of the article on travel and tourism, fishing and hunting, amateur sports, about Equipment and equipment for outdoor activities, repairing a carburetor with your own hands requires certain maximum concentration and knowledge.

The most popular malfunctions of a carburetor with a mesh filter of a malfunction carburetor, much more often, two. it either clogs or breaks. In order to determine which of the malfunctions of your carburetor befell, it is necessary to unscrew the fuel filter cover and reach the mesh filter.

Removing the carburetor on the VAZ 2109-2108 The procedure is not complicated enough, and it should immediately bring the list of tools that are useful for the execution of this repair of the carburetor starting device in most cases lies in the pollution: the starting device is washed with acetone or simple gasoline. If possible, it is possible to blow out the starting device with compressed air.

In case of malfunction of the intake pipeline, the carburetor can appear traces of soot near the place with a loose connection, or a narrow fuel film. Understand the places in which fuel leaks are going on, perhaps dry, wipe all the places that arouse suspicion.

The tightening of the mounts is to be sent evenly and carefully so that there is no distortion of the carburetor flange. In some cases, tightness disturbances still remain besides at the end of the tightening of the mounting nuts.

In this case, you must clean the place of suction, and replace the gasket in it. If the circumstance of the carburetor malfunction is a breakdown of an accelerating pump, then you will need to come to terms with its replacement. Details of the acceleration pump are not subject to repair.

If the pump is working, it can be washed with gasoline or blow. It is also worth checking how the details and levers of the diaphragm of the pump freely move

Pay special attention to the ball in the spray

Installation and adjustment of fastening of a gasoline trimmer for grass. Backpack belt.

The convenience of use depends not only on the proper placement of a gasoline trimmer for grass on the backyard belt, its equilibrium, and on the correctness of the installation and adjustment of a two.handed handle, often called a bicycle.

Motokos mount adjustment. What to strive for.

After the adjustment of the two.handed handle and the backpack belt, the cutting tool of the lawn mower, which is in the hanging position on the strapping, should be parallel to the ground, the hands should not touch the garden tool with all this. The height, of course, may vary depending on the task performed, 20-30 cm with a mowing of the highest grass for feed, 5-10 cm for cutting lawn grass.

Motokosa should be balanced with the installed cutting equipment: disk or a reel with a fishing line.

Adjusting: Running belt / backpack belt / belt of a backpack type / shoulder belt / parachute belt.

It may be due to the incorrects of the translation, at the moment you can meet a huge number of titles of the belt suspension of garden technology: the rain belt / belt of the RUSSIC / BUICE Type / shoulder belt / parachute belt / parachute belt

For the lawn mower, only a biceps belt is suitable, hence the associations with a satchel and a portfolio, which should be correctly annexed and fitted by the figure. You can naturally hang on one strap garter,belt a loop, but I do not recommend, except for completely low.power models. Weight and vibration will rapidly make themselves felt.

First you need to adjust the height of the hook of the biceps belt in coordination with your own growth. To do this, we put on a parallest belt and pull the shoulder belts so that the hook is below the hips to the width of the palm, and the load is moderately distributed along the straps. If you pull up a trimmer for the grass above, then only narrow the gravity of the grass, and the cutting tool will most likely be at an angle to the ground.

We hang a motorcycle. Reducing the hook into the necessary hole of the bar we balancing the gasoline trimmer for the grass so that the knife when releasing hands is on the chosen, depending on the tasks, height.

On those models, a gas station that are equipped with a loop for fastening, not a bar, you need to carry out balancing, moving it along the bar.

The purpose of such balancing is to disperse the weight of a garden tool through a backpack belt on the shoulders, and not its unchanged support with hands. Hands should only set the direction of the cutting tool.

Then you need to adjust the two.handed handle of a gasoline trimmer for grass. If the balancing of the garden tool is after which it is violated, then you need to repeat all the stages, to the merit of the result.

It does not always come out to get an impeccable balance of the lawn mower on the background belt. From time to time, the parallelism of the knife by the Earth can only be achieved with individual selection of the length and replacement of the standard rod of the trimmer for grass. Do not forget that the center of the masses will still affect the amount of fuel in the Motorics tank. But not even a completely conducted adjustment of the mounting motorcycle can significantly facilitate the work of the operator.

A belt for a trimmer for grass from China. characteristic and design of the product, price, video

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. the paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

To replace the cord with knives, you need to unscrew the mounting nut and install the cutting element. Then you need to return the nut to its place, tighten the wrench.

The operator must take care of his safety. Mow grass in thick protective clothes. Use glasses to protect the eyes from dust, grass and flying fragments. Cover your hands with gloves.

The electric trimmer for grass is connected, and the batteries are charged a few hours before use. Fuel is poured into a gas mower.

The lawn mower is held so that the coil or knife is parallel to the ground. Turn on the engine when the tool is in the correct position. After mowing the grass, the lawn mower turns off.

The first start

Before the first launch, the operator collects the lawn mower, as described in the instructions attached to the product.

If the trimmer for the grass is gasoline, before use it must be checked. The fuel tank is filled to the neck.

The engine should operate on fuel, so it should work within a few minutes without the first loading at the first launch. After that, start mating grass.

Works in

Lawn mowers should be launched before the start of work. The operator turns on the engine; This should be idle for a while. It is necessary to ensure that the engine does not overheat, there should be no load.

When running motorcycles, the load increases gradually. If you run at high speed, the engine will not work fine, this will affect the future operation of the lawn mower.

At the first launch, you do not need to completely develop a temporary resource. When the engine is idling, the lawn can be launched. The motorcycle should work out for no more than 15 minutes, after which the engine will turn off and cool.

If you want to launch an electric trimmer for the grass, the group is first going. Then start the test run at least 3-5 times. If the engine works fine, go to the comment. At first they work no more than 5 minutes, then the duration of work gradually increases.

How to wear a belt

If the tool has a shoulder belt, it hangs on the shoulder before starting work. A trimmer for grass is attached to both shoulders if he has a backpack.

The model with a bicycle handle holds with both hands, the D-shaped handle turns around the palm. The belt needs to be worn so that it is comfortable so that the back does not get tired.

How to cut a lawn so that it is even

In order for the grass on the lawn to be smoothly trimmed, you must lower the lawn mower as low as possible during operation. The plot should be divided into squares. Need to work, moving clockwise. In this case, hay will always lie to the left without interfering with your feet.

How to correctly configure a belt of a lawn mower for yourself

Service centers often complain about consumers of household garden equipment, who still make mistakes at the stage of its assembly and the first launch and disable equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after the wrong assembly, when unnecessary details were found or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household garden equipment. You just need to be careful. Let us give an example the procedure for assembling the Stihl FS 130 lawn mower, complementing our instructions with illustrations.

You need to start the assembly with the fact that open the box and check the package of the unit. If everything is in place, then we have to put the handle to the bar with the motor, put on the belt, attach a protective casing and cutting elements.

First you need to get the handle and unscrew the barbar, which attaches the upper part of the support, without giving up the springs.

We insert the handle into the nest and fix it without tightening it. We adjust the final position after the final assembly of the lawn mower.

We put on the control knob on the handle tube and tighten the mounting bolt. For this, the kit has a universal key.

All controls of the stihl fs 130 gas station are located on the handle. This is: a gas lever that protects against random turned on and the lever of turning off the unit, which is controlled by the thumb. At the modification, motokos with a D-shaped handle are located next to the engine on the bar.

Put a plastic protective casing. If it is planned to use only a knife, then for its operation we use part of the casing (in the picture it is painted with orange).

If the cutting fishing line is working, then a plastic skirt is additionally put on a protective casing and a knife is placed for cutting a fishing line. In some varieties of this model, the casing can be universal or two different casings are attached. one for fishing line and the other for a knife.

Putting the skirt on the casing, you need to check the reliability of its fastening. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting fishing line and fix it with a screw.

It remains to install the coil, having previously tucked it with a fishing line. The coil is wound on the shaft (as in the illustration) or attached with a special nut. Keep in mind that the thread on the shaft is usually the left. How to refuel a fishing line for a trimmer to a coil read in the instructions.

If a knife is required, then instead of a coil we put it. The knife is equipped with a protective lid so that during operation it does not bury into the soil. After installing it, do not forget to scroll through this cutting element and make sure that there is no backlash.

Well, the last, the easiest, stage. installing a metal clamp on the bar, t.e. suspension belt mounts.

After the lawn mower is assembled, we put on a shoulder belt or a belt parallel suspension (depending on what is given in the kit) and drive them according to the figure. Pour the gasoline mixture, start the engine. and go ahead.

Fresh Комментарии и мнения владельцев

How to clean the pomegranate from the peel correctly. Video Description: In hot and solar Georgia, there is such a custom: if the young man is in love with a girl,

Battery capacity

The battery reserve is measured in a/h. One unit ampere is enough for about 15 minutes of work. For example, in order to cut the lawn around an ordinary house, 2 A/h is enough. If the entire site is 3-4 a/h.

Interskol MKE-20/300

It is considered one of the best in terms of price-quality among electric trimmers. Power 0.3 square meters. Field thickness. 1.6 mm. Made almost completely of light plastic, so the weight is only 1.8 kg. The best option for women.

  • good quality;
  • small weight;
  • affordable price;
  • low noise level (83 dB);
  • high performance when working with fine grass.
  • low.power engine;
  • warms up at large loads;
  • not very comfortable mount.

Well suited for working with the lawn on the site. The tool is light and convenient to use. It is ranging with competent operation rarely. Another advantage is low price.

Carver TR 400T

Electric model with a capacity of 0.3 kV. Equipped mass. 2.2 kg. Field thickness. 1.3 mm. With a good power indicator, it differs relatively high performance and reliability. Budget option for one.time work at a summer cottage.

  • low price;
  • good performance;
  • small weight;
  • reliability.
  • does not cope with large volumes of work;
  • hard to remove the coil;
  • Zausenets are often formed on the fishing line.

How to correctly configure a belt of a lawn mower for yourself

Service centers often complain about consumers of household garden equipment, who still make mistakes at the stage of its assembly and the first launch and disable equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after the wrong assembly, when unnecessary details were found or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household garden equipment. You just need to be careful. Let us give an example the procedure for assembling the Stihl FS 130 lawn mower, complementing our instructions with illustrations.

You need to start the assembly with the fact that open the box and check the package of the unit. If everything is in place, then we have to put the handle to the bar with the motor, put on the belt, attach a protective casing and cutting elements.

First you need to get the handle and unscrew the barbar, which attaches the upper part of the support, without giving up the springs.

We insert the handle into the nest and fix it without tightening it. We adjust the final position after the final assembly of the lawn mower.

We put on the control knob on the handle tube and tighten the mounting bolt. For this, the kit has a universal key.

All stihl fs gas troops are located on the handle. This is: a gas lever that protects against random turned on and the lever of turning off the unit, which is controlled by the thumb. At the modification, motokos with a D-shaped handle are located next to the engine on the bar.

Put a plastic protective casing. If it is planned to use only a knife, then for its operation we use part of the casing (in the picture it is painted with orange).

If the cutting fishing line is working, then a plastic skirt is additionally put on a protective casing and a knife is placed for cutting a fishing line. In some varieties of this model, the casing can be universal or two different casings are attached to the fishing line and the other for a knife.

Putting the skirt on the casing, you need to check the reliability of its fastening. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting fishing line and fix it with a screw.

It remains to install the coil, having previously tucked it with a fishing line. The coil is wound on the shaft (as in the illustration) or attached with a special nut. Keep in mind that the thread on the shaft is usually the left. How to refuel a fishing line for a trimmer to a coil read in the instructions.

Zero Turn Mower Belt Keeps Slipping from Guide

If a knife is required, then instead of a coil we put it. The knife is equipped with a protective lid so that during operation it does not bury into the soil. After installing it, do not forget to scroll through this cutting element and make sure that there is no backlash.

Greenfield Ride on mower, How to do Drive belt replacement & slipping adjustment. Please Subscribe

Well, the last, the easiest, stage installation on the bar of a metal clamp, t.e. suspension belt mounts.

After the lawn mower is assembled, we put on a shoulder belt or a belt parallel suspension (depending on what is given in the kit) and drive them according to the figure. Pour the gasoline mixture, start the engine and go.

Fresh Комментарии и мнения владельцев. Grass trimmer belt. How to adjust Range Grass trimmer belt

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knife lowered to the ground is located parallel to the surface of the site (strictly horizontally). When working with a saw trimmer disk, adjust the grass The height of the hook (with a lift of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted slightly forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for the grass forward or backward, equalize the trimmer for the grass so that when the steering wheel is released, the trimmer knife for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass should be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach.

Adjust the shoulder belts of a trimmer for grass (braids) so that the load is distributed evenly on the shoulders (check by pressing the handle of the trimmer for the grass on the hook on the hook).

The video pro Range Husqvarna grass trimmer belt. On the design features of the belt suspension (harness), which facilitate and make a more safe mowing with a motorcycle, a trimmer, a benzocosa, a Husqvarna bush and an elastic belt, quickly unfastened locks (carabiners) in case of fire or any other situation requiring a quick release from Trimmer for grass. On the universality of belts for men and women.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

Working with a trimmer

Manufacturers do not recommend working in sandals or barefoot, as this can lead to injuries. Clothes and shoes for working with trimmers should reliably protect the legs from damage.

A special skill is not required when working with a trimmer. just properly hold it by both handles and move evenly along the surface.

a fishing line for a trimmer (usually 1.3-1.6 mm), which refuel trimmers for grass, is a special. Fish fishing line for a trimmer is not suitable for this purpose.

After work, the trimmer for the grass must be cleaned. Clean the ventilation slots regularly cutting fishing line for a trimmer and coil using a soft brush or dry fabric. Using a stupid scraper regularly remove dirt from under the protective casing.

Keep the tool in a warm dry room, protect it from dust and dirt.

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knife lowered to the ground is located parallel to the surface of the site (strictly horizontally). When working with a saw trimmer for the grass, adjust the height of the hook (with a tightening of the shoulder straps) so that the sawy disk of the trimmer for the grass is tilted a little forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for the grass forward or backward, equalize the trimmer for the grass so that when the steering wheel is released, the trimmer knife for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass should be equalized so that when the steering wheel is released, the car hung on the hook horizontally land.

Adjust the shoulder belts of the trimmer for grass (the straps of the “harness”) so that the load is distributed evenly on the shoulders (check by pressing the handle of the trimmer for the grass on the hook on the hook).

Husqvarna grass trimmer’s video. On the design features of the belt suspension (harness), which facilitate and make a more safe mowing by a motorcycle, a trimmer, a benzocosa, a Husqvarna bush. wide shoulder straps and an elastic belt, quickly unfastened locks (carabiners) in case of fire or any other situation requiring rapid release from a trimmer for grass. On the universality of belts for men and women.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

colleagues, who regularly and a much use of gasoline trimmers, tell me how to choose the right length of the shoulder belt and the position of the handle.

I had before, I was electric, light, mowed and did not steam. One trouble, you had to constantly monitor the wire, so that it was not accidentally “mowing”. This year, the electric was jammed at the electric. Took a simple gasoline Chinese. (if anyone interp. Patriot 3045). With a J-shaped handle. Started mowing. on half the site is tired. Both hands are constant in tension. The right is tired stronger, t.to. still have to crush the gas. If I do the belt shorter, then I can’t briefly mow the grass. And it turns out that in general I hold a trimmer in my hands on weight. The belt, only saves from jerks (when you accidentally hook the earth, and the trimmer tries to run away for the grass). Twist.For anyone. I just can’t find it so that it is convenient. In general, share cunning how to correctly configure the belt length and handle position.

How to use a trimmer for grass at home

Electric trimmers for grass for removing hair on the body. a relatively new “technical trend” for a modern person. Devices are designed for home use or work in a beauty salon. The unconditional advantage of the apparatus is that it is easy for them to use in any conditions. at home, in the train, in nature.

Throughout the entire service life, the device must be regularly cleaned and lubricated. Using a special brush, it is necessary to remove all small hairs after each haircut. For some models, there is a flushing of knives under a stream of water. It is also advisable to periodically lubricate the knives, since during operation the upper part of the teeth moves along the lower platform, and as a result of such friction, the details wear out. To lubricate the tool, you need to perform the following manipulations:

  • Take the oil from the set or purchase WD 40 yourself;
  • drip a few drops on the entire surface of the knives;
  • remove excess oil and hair with a napkin;
  • turn on a trimmer for the grass and let it work for 20-30 seconds;
  • thoroughly wipe the leisure blades.

Important! It is best to keep a trimmer for grass in your native packaging or purchase a special box for this for this. Of course, you need to store a clean and dry apparatus along with all additional elements.

So, the trimmer for the grass has become a universal device for removing and cutting hair on any parts of the body, ranging from a soft gun on the head of infants and ending with excessive vegetation in the ears and nose. To learn how to use it, special skills are not needed, but some nuances should still be known and observed.

How to cut the lawn so that it turns out to be even

The lawn implies an open even area that excludes some large landscape irregularities (pits, hills). Of course, snags and stumps should not stick out of the ground. their uprooting should be borne in advance. It is best to plant a place under the lawn with soft varieties of grass, which are good to mowing. In this case, you will spend much less effort.

  • Experts recommend dividing the entire area into small squares and mowing along them, moving from one to another clockwise. In this case, the grass that you mowed always remains on the left, and will not interfere with further manipulations with the trimmer.
  • If you need to mow “under the root”, then the angle of contact with the surface should be at least 30 degrees. With this technique, the device is practically in contact with the surface with a cutting knife.
  • There is an opinion that in order to give the lawn of the completed type, it must be mowed by a lawn.type lawn mower. This is partly so, but having adopted, you can achieve good results and with a manual trimmer. To correct the shortcomings after the work of a trimmer for grass, it is also recommended to use hand scissors for grass.
  • The lower the fishing line for the trimmer will be, the more even the lawn will be. Leaving the grass higher, it is likely that in different places it will be molested in different ways. This is due to the fact that the trimmer itself for the grass is not fixed on a horizontal plane, which leads to irregularities during the reciprocating movement performed during operation.

We select the revolutions correctly

What speeds should be mowed to cut the lawn evenly? When is it better to increase or lower the speed? How much time you can hold high speeds? It should be noted that all these issues are relevant only for a gasoline trimmer for grass. The ethletric trimmer for the grass does not have the ability to choose the frequency of the engine, it goes almost as much as possible to its peak power and works on it while both power buttons are clamped.

If the device itself allows you to adjust the engine speed during operation, then the following will be optimal:

  • minimum turns for working with lawn grass on a flat surface;
  • average turns when using a disk for high grass and non.thick bushes;
  • increased (maximum) revolutions for drilling bushes.

Important: no matter what revolutions are used during operation, it is important to give the motor rest, especially if non.standard (increased) load is implied.

Gasoline unit

In the case of a gasoline trimmer, it is necessary to check the gearbox for lubrication. Also, do not forget to add lubricants to the fuel tank, if the instruction manual is evidenced. As a rule, gas and oil are mixed in a ratio of 45 to 1, but these indicators may vary depending on the model and manufacturer, so you should carefully study all the technical requirements for the device. The fuel container must be filled on the very neck. If all technical fluids are flooded, then you can try to start the device. But it’s not worth mowing right away, it will be better to let the trimmer work without load so that the engine works to the flooded fuel. A few minutes will be enough, after which you can give the motorcycle full load.

The correct trimmer for grass

There are trimmers for grass for which additional devices are not needed. for example, light electrochemers on batteries. Even a child can tolerate them, and they are firmly lying in their hand without breaking. But in most cases, trimmers for grass weigh from 6 to 9 kg, and in order not to tire about to transfer them from place to place, you need a belt.

What else is a trimmer belt for?

1) for transporting a trimmer for grass. Transport a trimmer for grass to the country when there is no car, a difficult business. If the equipment does not have a belt, then at least a cover with a belt over the shoulder should be sewn. How to dress a trimmer belt for grass video correctly. How to put a trimmer belt for grass correctly. How to wear it correctly. How right. This will facilitate the load when transporting a trimmer for grass.

2) for comfortable mowing of grass. After all, if the hands are lugged, then the weeds and the overgrown lawn will not want to mow. And if you want, then the hand trembling with lethargy is a dangerous option.

3) for the ergonomic position of the trimmer for grass relative to the body. Correctly fastened and adjusted in length belt protect against back injections and overvoltage of the muscles of the back.

4) for security. A trimmer for grass will be much safer if the probability of slipping from the hands when it gets into the cutting head of branches and hard vegetation decreases. When this happens, a trimmer for grass, whether it is a benzo- or electric cobber, makes a sharp jerk, and a trimmer for the grass literally “breaks out” from the hands.

It is for these reasons that many models of garden trimmers are equipped with belts. They are threaded through the shaft of a trimmer for grass and attached over the operator’s shoulder. The belt helps to balance the total weight of the trimmer for grass and the operator, and you do not have to compensate for the balance, stretching your hands or setting back one leg.

How to dress a motorcycle

Redverg 5014460 Belong belt for hanging a trimmer for grass. With the protection of the thigh. Bought for a chamber for Champion grass.

Small video about kosba by a benzotrimer / benzocosa on the example of a student: how to dress a belt, like a balancer.

1) Find the place where the belt is fastened to the shaft of the trimmer for the grass. How to put a trimmer belt for grass correctly. How right. On many models, designed for amateur gardeners, a hook, a screw, or a groove is located next to a handle or a spark plumber.

2) squeeze the belt carbine and hook it by the ear on the handle of a trimmer for grass. Find the second hole for the belt and do the same.

3) Throw a trimmer for grass with a belt on the back so that the upper part of the belt goes over the left shoulder (for left.handed ones. on top of the right).

4) adjust the length of the strap so that the lever responsible for the power of mowing and continuous mowing is at the convenient height of the hand slightly bent at the elbow. The width must be ensured that from the body to the trimmer for the grass is at least 10-15 cm.

5) Put your right hand on the lever, and the left hand on the top panel. Bring the head of the trimmer for the grass, feel where the trimmer for the grass has a center of gravity. If the weight is still unbalanced, and you have to bend down, or you put a remarkable force to hold the device, try to tighten it above or lower the belt by 1-2 cm. After you figured out the belt completely, you will feel what position with the trimmer is most convenient

6) stop trimming the grass if you have back pain and in your hands. Adjust the belt again.

What should be a belt for a trimmer for grass?

It is no secret that belts for a trimmer for grass are often only a sling with two carbines, which is not adapted for the convenience and comfort of the operator. The overview on the lawn mower bought a belt bought for a trimmer for Champion grass how to dress properly. Therefore, the belt can be bought in specialized stores of garden equipment, purchased via the Internet, or simply order in the nearest studio working with leather products.

The leather belt is best for the trimmer for grass: it does not slide and fixes the equipment rather hard, and the skin is pleasant to the touch.

In the shoulder area you can make a special quilted pad, which will make the load on the shoulder less noticeable and reduce friction.

Remember that the correctly selected belt for a trimmer for grass will significantly increase the comfort and speed of working with this garden equipment. So, health, mood, and the lawn will be in perfect order.

How to work with an electric trimmer for grass correctly

Choosing a technique for a summer cottage, you should not always chase strong and overall devices. The power of the tool is, of course, a fundamental parameter, but it pulls in advance the increased weight of the device, its huge size, as well as the highest cost and overstated expenses for fuel. But that’s not the point.

If you have a small garden, in which fruiting trees or a small lawn with flower beds and shrubs are tightly planted. then cleanse it of weeds and mowed the grass neatly. this is an obviously an overwhelming task for at least a lawn mower. In such cases, even a hand tool is an ordinary braid for grass and then it will not help: you simply cannot swing it, bumping into the trunks of trees.

An impeccable output in this case is a good and cheap electronic trimmer for grass. He is so light, successful and ordinary in management, which always becomes a favorite with ladies and pensioners. Small, quietly buzzing electric motor, handle with comfortable handles and a nylon fishing line for a trimmer, tucked in a spool. these are the main components of an electronic trimmer for grass.

The note! If the trimmer for the grass is installed too high, this will greatly limit the capture of the grass.

Balance of braids for grass by moving the seedling

Having established the necessary height for yourself, you need to balance a trimmer for grass. To do this, adjust the ear to which the device is suspended to the belt, forward or backward. As a result, you need to attach the strap to the trimmer so that when the steering wheel is released, the knife or blade of the saw does not lie on the ground, but hung above it without touching the surface. How it is located depends on the goals set.

Advice! The distance of 20-30 cm above the ground is suitable for mowing high grass, and for lawns it takes 5-10 cm.

Adjusting the shoulder belt

To evenly distribute the load on the shoulders and back, the belts should be correctly adjusted. It is enough to tighten or loosen the belts. They should not break into the body or hang. You can understand how the weight will be distributed if you press the hook to hang the braid.

Attach the bush to the belt

Depending on the model on the belt, you can install a gas tape. using a belt or loop. In the latter case, for the balance, it is necessary to move it along the bar in order to get the desired result. In some cases, shock.absorbing mechanisms are provided that smooth out vibration and soften a sharp spasmodic movement.

Balancing pen

An important step in adjusting the belt is also the adjustment of the handles to the optimal level. When the operator holds motorcycles, the hands should be relaxed, and the shoulders should be parallel to the body. Therefore, after installing a belt with two shoulders, the mechanism with two hands should be adjusted so that moving it up or down. The result should be that the hands only set the direction, and do not hold the device. If after that the balance of the trimmer for the grass is again violated, you will have to repeat all the steps again.

Safety regulations

Among the safest and most popular trimmers, the products of German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that should be clearly known and observed when using a trimmer for grass

  • Please read the instructions before using.
  • Cannot work with a trimmer in a state of fatigue, illness, intoxication.
  • It is forbidden to use tapes in explosive and firefighting places.
  • Do not mow during lightning and rain or after rain, when the grass is wet.
  • You can only work in the daytime with good lighting.
  • Use only the type of fuel and lubrication that is suitable for a specific trimmer model for grass.
  • It is not recommended to repair the tool yourself.
  • Do not touch rotating or heating elements during operation.
  • Do not smoke or light fire during a not the.P.

Important! While working with a trimmer, there are other hazards for health: increased noise, vibration, exhaust gas emissions, high temperature of some parts, flying branches and much more. To minimize risks, you should use protective clothes, glasses and headphones

If you still have questions about setting up the strap of a particular model of the bra, you can try to find answers to the questions attached to the product, or watch an online video that clearly and easily shows how to install and adjust the belt using a braid.

The best trimmers for grass

Trimmer for Stavr TE-1700R grass on Yandex market

Engine

In electric trimmers (electric braids), the power is measured in vatas (W) and the maximum engine power reaches 1200W. In comparison with gasoline braids, they are somewhat weaker, but they also have their advantages.

  • Weight, t.to. Electric trimmers for grass are much easier.
  • Ease of use. you do not need to think about buying gasoline and oil, as well as how to mix them.
  • Electric trimmers for the grass are much quieter, t.e. The noise published by an electric engine is much less noise from a gasoline engine.

And now about the shortcomings

The braids with the lower engine of the engine have very small power. No more than 650 watts. And also never equipped with a knife (!).

Trimmers with the upper engine location are much larger. They are much more powerful. up to 1200 watts

Most often, a fishing line for a trimmer is placed on electric trimmers for grass as a cutting nozzle, but there are models on which you can put a cutting disk, or differently-a cutting knife. As a rule, these are powerful (from 1000 W) models. The power of the trimmer for grass with the upper engine location allows you to install a thicker fishing line for a trimmer on it, which allows you to mow thick high grass. An example is: Sturm!, Energomash, Champion

Overheating blocking

Very rarely found on electric trimmers. The essence of his work is as follows: if the engine overheats, then a special thermal switch will not allow the engine to burn and turn off the gas outlet. Of course, unlike gasoline, an electric oblique must be monitored, t.e. After 15-20 minutes of work, you need to turn it off and let cool about 15 minutes. There are overheating locks in the braids of EFCO 8060 and 8100.

Electric trimmer for grass: how to make the right choice?

Trimmer for grass is the only right solution for mowing grass in places that are inaccessible to a wheeled lawn mower, in particular around bushes, trees, along the paths, fences and walls.

Electric trimmer device diagram for grass.

There are 2 types of trimmers for grass: gasoline and electric. In this article, we will try to describe the main points that you need to know when choosing an electric trimmer for grass.

Trammers for grass with an electric engine are almost no noise, start with a simple press of the button and do not pollute the environment. However, it is more difficult for them to cut thick stems of weeds and even thick grass. In addition, his engine needs power supply, which is most often summed up by means of a long network cable, which fetters the freedom of action of the mower and threatens to fall under the knife. Trimmers with a built-in battery are not needed with the outside world, but in a day they can mow the grass for a maximum of 20-30 minutes. The rest of the time will go to recharge their low.power, heavy and very capricious during operation and storage of batteries.

Type of handle of electric trimmers

Electric trimmer handle device for grass.

When choosing a trimmer for grass-crossbar, it should be borne in mind that they are with:

The D-shaped pen is convenient if the volume of work is small, but requires great maneuverability (for example, for processing shrubs, trees, paths and hedges). For this, a fishing line for a trimmer is best suited. If you have a taming of violent thickets that have long been repelled at the hands of the hands, pay your close attention to the models with the D-shaped handle, an additional J-a knife and the ability to install a knife. The J-shaped handle prevents the operator’s excessive approach to the conical gearbox. The J-shaped handle should be attached when the trimmer for grass is equipped with a knife for grass. To facilitate the work, you will need a shoulder belt.

The T-shaped handle is convenient for working in open space, while the movement you perform will be similar to the fact that they mowing a scythe. Such trimmers for grass are designed for large volumes of work in large open spaces. powerful trimmers for grass can be equipped with a three.petal knife, which can cope with a branch with a diameter of up to 15 mm. When working with such a trimmer, it is important that it is equipped with a harness for dense fixation on the human body. Remember: the more powerful the trimmer for the grass, the greater the volume of work it can do.