Adapter to power takeoff shaft of power tiller
Review of adapters for Belarus 09n power tiller
Let’s consider different ready-made models, let’s look at their features, pros and cons.
Celina PM-05 (rear)
Tillage module Celina PM-05 is one of the most common adapters for MTZ 09n motor-block. It is connected to the back, has a comfortable seat, it is possible to connect additional equipment, such as a cutter, harrow or plow.
Adapter Celina PM-05 for MTZ 09n is ideal for small and medium-sized farms.
The track of the Celina PM-05 adapter is smaller than that of the 09n power tiller. it is 62 cm. Wheels are installed pneumatic, their size. 4×10 inches.
There is a belt brake on the rear wheels, which simplifies the steering of the walking tractor and makes it safer in general.
The weight of the adapter for MTZ 09n power tillers is 50 kg. This may not be enough to work, for example, with a mill at low speeds. To prevent the front end from lifting with the tiller, you can use additional weights or work at a higher speed. It, by the way, for the tilling module PM-05 can reach 10 km/h.
Main features
The disadvantages include the following features:
- The seat has an ergonomic shape, it is comfortable enough, but can not be adjusted in height and tilt (welded).
- Brakes are weak, their power is not always enough to quickly stop the motoblock.
- Coupling for plow does not allow you to adjust the position of the plow horizontally, which makes it difficult to plow.
- The plow lift lever mounting axle is unreliable (the nut can unscrew, and one lock doesn’t always keep the lever in the right position).
Horsam IS-2 (second version, front)
Adapter for MTZ 09n motor-block Horsam IS-2 is the most widespread and well-known among ready-made adapters. This model is a trailer with a seat and functional steering wheel.
Compact, but at the same time powerful, single-axle tractor MTZ 09n, equipped with an adapter IS2, ideally suited for work in the gardens, in the garden and homestead plots, as well as in the fields. In fact with a slight movement you transform a single-axle tractor into a full-fledged mini-tractor with the ability to use a wide range of working equipment.
Adapter for Belarus 09n power tiller with steering control is maneuverable and easy to operate. The main steering levers of the adapter are used to control the main functions of the power tiller, namely:
At the same time, the steering mechanism of the front adapter for MTZ 09n motoblock is thoughtful, all the organs are competently located. steering wheel similar to an ATV steering wheel. Getting behind the single-axle tractor equipped with an adapter, you will quickly get the hang of it and drive the machine without any problems, making any maneuvers. For convenience, gear shifting is placed directly on the steering wheel, on the right side of the driver. Rear gear is engaged with the lever on the right.
Front attachment for Belarus 09n Horsam IS2 power tiller can be coupled with a wide range of working equipment. In particular, you can buy a factory-made JSC “GMZ” (Gomel):
- turner
- cultivator;
- rotary cutter;
- plough;
- straight blade;
- auger snow blower;
- potato planter and potato digger;
- rotary mower.
In addition, there is an opportunity to further equip the machine on the basis of the MTZ 09n with an adapter Horsam IS-2 front and rear rack, as well as connect a roomy trailer to transport materials, cargo, construction waste, crops, etc.д.
Front adapter for Belarus 09n engine block Khorsam IS-2 is also compatible with working equipment of other producers. In general, there are no problems with connection of implements to this module.
There are pneumatic 5×10 inch wheels on the adapter for MTZ 09n Horsam IS-2 motor-block. Pressure in chambers is 0,2 MPa. One of the main features of this adapter is the wheel track. it is equal to 70 cm. The same track on the MTZ 09n power tiller. This makes the equipment more stable and passable, because the wheels in off-road conditions go along one track, for which less force is applied.
Horsam IS-2 is an adapter for MTZ 09n for all-wheel drive. This means that the tractive forces are distributed on both axles. Combined with a ground clearance of 130 cm and large wheels with a relief tread pattern, it makes the unit passable and endows it with off-road qualities.
In the reviews, you can often find information that the front adapter for a Belarus 09n Khorsam IS-2 power tiller with steering and four-wheel drive is used as a vehicle (like a quad bike) to get to remote areas. Nevertheless, a single-axle tractor with an adapter is not a car or ATV, and it is prohibited to operate the technique on public roads.
Main characteristics
Out of all existing ready-made versions of adapters for MTZ 09n Horsam IS-2 is distinguished by the greatest functionality and convenience. But the regular engine of a Belarus power tiller is often not enough to use all the power of the machine to its full capacity. Therefore, along with the installation of the front adapter Horsam IS-2, it is often necessary to change the native engine. In practice, the Chinese engines Lifan and Weim with a capacity of 11-15 liters have proved themselves well.с. Minus of this solution. a single-axle tractor Belarus 09n with a steering adapter and a new engine will cost 100-130 thousand. rubles.
AM-4 with steering control (front)
Front adapter for motor-block MTZ 09n AM-4 is produced by Minsk greenhouse plant (MZT). Compared to Horsam IS-2, AM-4 is bigger and more impressive, but also more expensive.
Adaptor for Belarus 09n with steering control has a comfortable ergonomic seat with a backrest, “motorcycle” steering wheel, where the main controls and brakes are located. When you connect the adapter, the single-axle tractor essentially turns into a quad bike with all-wheel drive, allowing you to use the single-axle tractor as efficiently as possible.
The adapter for MTZ 09n for all-wheel drive AM-4 is equipped with pneumatic wheels, their size is 6×12. The track is equal to 700 mm. the same as on the base motoblock Belarus. Ground clearance of the adapter is 220 mm, which allows it to overcome off-road conditions without any problems.
After installing the front adapter for MTZ 09n AM-4 power tiller, you can adjust the seat position to your liking, because it has several adjustment directions. Heavy-wall tubes with anti-corrosion treatment make the frame of the adapter. That is why the construction does not go bumpy even in case of intensive work on heavy soil.
Steering column of MTZ 09n adapter for four-wheel drive resembles a motorcycle steering wheel. Besides steering wheel, control is carried out with the help of levers, which are used to engage clutch, throttle drive, engage engine, reverse speed. Transmission lever is on the right side of the driver.
As an option for the adapter to the Belarus 09n with steering control a mechanism for lifting the attached equipment with locking of a lever in two directions. transport and working is offered. Without a lifting mechanism the adapter can be used only as an ATV. With the mechanism on the adapter for MTZ 09n power tiller you can attach a variety of equipment for tillage at the front.
AM-5 with steering control (rear)
AM-5 adapter for MTZ 09n, like AM-4, is produced by MZT plant. It is designed for rear installation, has a steering column, driver’s seat, brakes. After installing the AM-5 adapter, you can control the tiller in sitting position without exerting physical effort.
The driver’s seat can be adjusted in several directions. The AM-5 adapter for the MTZ 09n also has a glove box. The frame is strong and durable, made of thick-walled tube with powder coating. This design provides the necessary rigidity and resistance to torsion.
Gear steering column of AM-5 adapter for MTZ 09n transmits power to rear wheels. This makes the AM-5 more maneuverable than the AM-4. The adapter also features a minimum turning radius and is easy to control in tight spaces. Pedals are used to control brakes, clutch and reverse. Switching of speeds is carried out by means of the lever located on the steering wheel.
AM-5 adapter for MTZ 09n is supplied with an installed lifting mechanism for attachments with the possibility of locking the lever in two directions. transport and working. Thanks to this, the adapter for the Belarus 09n power tiller can be fitted with a plough, miller, dipstick, potato hitch, and trailers.
Vom on a single axle tractor with your own hands
The variety of agricultural adapters for heavy and medium-power tractors is just overwhelming. PTO shafts, power take-off shafts, plows, seed drills, harrows, sprinklers, and fertilizer equipment make everyday work easier and quicker for the farmer.
In order for the auxiliary links to function according to their intended purpose, you need a PTO (power take-off shaft). In this article we will explain how it works, what it consists of and how it can be manufactured with our own hands.
PTO: Construction and classification
The PTO takes in the rotational speeds from the combustion engine and transmits them to the auxiliary attachments, thus powering them.
SHRACHI POWER WEEDER Attaching A Pulley To The Pto Shaft
PTO classification
The power take-off shaft on the homemade minitractor, as well as on any factory model of agricultural machinery, is installed at the back. Only tractors of universal tillage cycle have side and rear arrangement.
Non-synchronous in turn are subdivided into:
Scheme of the device of synchronous (a) and dependent (b) shafts is shown in the drawing. Their leading working parts are:
- 1. clutch;
- 2. transmission shaft;
- 4. intermediate mechanism;
- 6. the PTO itself;
- 5 and 3. lever organs;
- 7 and 8. gears.
PTO with a non-synchronous drive is connected to the motor by a clutch or the crankshaft itself. PTO rotation with a dependent drive is started through the clutch, but also stops when the clutch is stopped.
PTS independent drive allows the PTS to operate regardless of whether the clutch is engaged or disengaged.
In case of semi-independent drive, PTO will be active only when the transmission is shifted.
The last classification worth mentioning is the control features. There are:
The first is most often equipped with a dependent drive and a stepped gearbox.
The hydraulic control is more complicated than the mechanical one. To make the scheme work, you need a more powerful planetary gearbox. The scheme of its operation in the disconnected and starting state is shown in the figure, where:
- 1. starting lever;
- 2. motor force;
- 3. propeller
- 4. spring element;
- 5. brake;
- 6. driven shaft;
- 7. pinion;
- 8 and 11. driver and its stopper;
- 9. actuator;
- 10. satellite.
PTO on a homemade minitractor: making at home
To make this engineering dream come true you can use one of the following drawings.
According to the diagram below, there are several basic elements in the design of the future PTO:
- front frame;
- drive sprocket;
- driven sprocket;
- additional selector shaft;
- 2 bearings It is better to take already ready-made, removed from old farm machinery;
- brake.
The assembly will look like shown in the installation diagram to the second drawing.
How to make a universal PTO?
In order to make this working unit versatile and create all the conditions for linkage aggregation in any part of the tractor, its design must undergo some changes. The tractor’s rear crossbar can be equipped with a power take-off shaft of the rear type, where the elements of the gearbox can be attached.
Side-mounted PTO requires aggregation of the metal structure, where transmission parts are implemented. Alignment with the driveshafts will be made through the splined shafts, which should be free in the design. The assembly should look something like the following diagram.
Making such self-made machines, do not forget that there are ready-made factory versions of PTO.
Assembling with the use of prefabricated parts will greatly simplify the work. The only disadvantage in this case will be the price.
Minitractors with PTO can be put on a par with expensive heavy tractors. Despite the fact that they cost many times cheaper, functionally they are no different from their industrial counterparts.
Minitractors with PTO can be operated all year round: in summer. to gather crops, in autumn. to collect leaves and grass debris, in winter. to clear the yard of snow or transport heavy loads.
What is a PTO on a power tiller. description and functions
PTO is an element that is needed to mount various types of attachments on a single-axle tractor. Motoblocs with PTO allow the use of such types of attachments as mulchers, seeders, harrows, stump grinders, mowers of the mounted type, as well as devices installed directly in the trailers used for work.
The main function of the PTO is to receive and transmit the rotational forces from the engine to the attachment. In most cases, this important element is located in the back of the power tiller, which allows you to connect almost all known types of attachments to it.
Among the PTO’s main advantages are its versatility, high durability and reliability. In addition to the advantages of the PTO has several significant disadvantages, which are the high weight of the element and the need to use an additional gearbox along with it.
Attachments for power tillers: what to buy first
single-axle tractor is equipped with a pair of pneumatic wheels and a set of steel cutters for land cultivation. The basic configuration will be enough to get acquainted with this technique, but to solve difficult agricultural tasks (reference to the article), for which the single-axle tractor is designed, additional attachments are required.
Let’s try to figure out what of the attachments you should buy in order to plow like a real farmer. What do you need first of all and what can be postponed?
Transport wheels help you move the machine to the job site and pull the plow or planter behind the tiller when conditions. soil type, moisture, and terrain. allow you to do so.
Cutters consist of four sharpened blades that are mounted to a hubbed base. Each cutter is connected in series with the hub to the axle of the power tiller. The basic model comes with 4 tillers, but the tillers have a power reserve of 6 or more.The 5 hp engine can easily handle 6 to 8 tillers, 3 to 4 on each side. With the help of tillers cultivate the soil, remove weeds.
Steel cantilever hitch, with holes for attaching attachments to the tiller. This auxiliary element is not included in the basic set, but it is obligatory to buy it, if tilling and plowing are planned.
Grit hooks are metal wheels with steel tread. They increase the traction of the power tiller and increase the weight of the machine, making the movement of the power tiller with the linkage confident and predictable. For example, you can easily drive uphill with a plow on sticky or wet ground. Steel plates of the grouser additionally loosen the ground.
The plow consists of steel plates that are angled together. The base is the hitch, which can be universal or stationary. Plows are built with a one or two way blade. The plough is designed for ploughing, preparing the ground for planting. Wedge-shaped design deepens the plow into the ground as the power tiller travels.
If the weight of the power tiller is insufficient for ploughing, weighting elements. steel hangers. are used to simplify work on slopes or hard dry soils.
Axle extensions are needed to extend working width with milling machines or to fit transport wheels and tines for specific row widths.
A boom or lister with flaps rounded at an angle and sloped at the joint. They make furrows for planting, cut beds, and dip the plants. By moving in the soil, the ridger loosens and lifts the soil, directing it toward the surface to form a ridge. Available as single or double row. The double row consists of two linkage arms on the frame. Working width is adjustable.
Disc coupled disc coulters have a thin rim and work their way unobstructed into the soil at the desired depth. The discs turn while pulling, thus reducing the resistance. For the disc harrow to rake up the soil, the discs are angled and the distance between the discs is set on the frame according to the width of the seedbed.
A potato digger is a device with a pointed arrow-shaped base and a fan of steel wires. When the tiller is in motion the potato digger base goes deeper into the ground cutting the crop together with the soil mass, which is sifted through a fan of rods leaving the root crops on the surface.
Single and tandem axle trailers and carriages, with seat or attached to a seat. Designed for transportation of agricultural and construction materials in homesteads, gardens and utilities.
Adapter is a frame with an additional axle and pneumatic wheels, seat, foot rest and brake. The adapter is needed to make it easier to work with the tiller on an area of more than 40 hectares. Turns a single-axle tractor into a mini-tractor.
potato-planter is a mechanized device, with an axle and tines or wheels, above which the hopper for the planting material is fixed. At the base of the potato-plough there is a plough connected to a conveyor belt and hopper. The lifting hooks rotate the conveyor mechanism, which picks up the roots and throws them behind the plough when it goes deeper into the ground. Then the disc plucker backfills them. The tubers are placed in the ground at the same depth and distance.
Rotary mower cutting discs together with the support wheel are fixed to the frame. The land wheel rotates the discs, which in turn mow the grass. Rotary or disc mower will help you mow the grass and weeds in the fields, pastures and meadows.
Rotary snow thrower metal bucket with augers and pipe for throwing snow. The snow mass is caught and ground by the augers driven by the belt pulley and pushed into the snow thrower’s nozzle.
Rotary brush roll on which you attach the rings with bristles. A protective mantle is mounted on top of the shaft. The snow brush is driven by the PTO shaft or a gearbox.
Snow shovel. tractor style steel bucket that fits in front of the snow shovel and helps move large amounts of snow.
Pumps pump driven by the universal joint shaft. Needed for irrigation and pumping liquids on the site.
For those who are confident that all the equipment will come in handy at the farm, there are ready-made sets of attachments.
Universal joint shaft adapter for power takeoff
Today we want to talk about technical solutions that are used in the manufacture of PTO shaft on homemade tractors.
This is a very interesting topic, the study of which opens up great opportunities for self-made products. In addition, it can be an important step in the modernization of factory tractors and tillers. And in general, if the production of a set for retrofitting a heavy power tiller with a PTO will begin, it will be the first step towards the possibility of producing a number of products:
Make sure you read to the end of the text. We promise you’ll like the ending.
How to make a PTO and hitch on a mini-tractor
The first thing we watched a video from the channel Evgeny Permyakov, where he talks about how to make a PTO and linkage on a mini-tractor, using for this “MT-5. Series 9”. The author used the simplest design, the PTO drive is made directly from the engine through a chain drive. PTO not disconnectable. This material can be safely called a quality, because the author explains everything in detail. Therefore, we thought it our duty to mention this design.
Briefly about the PTO for homemade mini-tractor
Originally the transfer case drove a hydraulic pump, but Mikhalych adapted it to PTO drive. The real solution, so it is definitely worth attention.
On the channel “Andrey Lyamin” you can find excerpts from the video “Homemade mini-tractor. PTO. The device”. The author assembled his mini-tractor based on parts of the car “Zhiguli”, and used a gearbox from a motorcycle “Ural” for the PTO drive. This combination allowed him to achieve the desired PTO speed and to implement an independent drive. As a result, Andrew got the optimal PTO speed.
There is another video on a similar topic. “PTO from a hydraulic motor on a mini-tractor”. It is placed on the channel “Sergey Andruschenko. The author is not alone in his approach to the construction of PTO. As the name suggests, Sergei himself was a bit vague, for the drive used hydraulic motor. this is an expensive design, but it has the right to life. That’s why we think it was very important to talk about this solution.
Now let’s consider one of the most important issues. We have already told earlier about self-propelled carts. The topic is interesting, but for its implementation, we need to solve several technical problems. And solutions have already considered. Made by the author of the channel “Lame Yoosy’s Barber Shop”.
After reading and reviewing everything, we can think about the manufacture of all those products, which we talked about in the beginning. The author plans to use a PTO to drive a mini-tractor, many predict the widespread use on motor tractors. And we expect that this idea will be the starting point for the appearance of new useful and functional products.
That’s all. For some reason we are sure that owners of motor tractors now have something to think about.
We are pleased to welcome you to our website and thank you for your confidence in our company!
Any garden equipment. is, above all, a complex mechanism, which at certain times requires attention and, if the rules of their operation and timely maintenance are not followed, repairs can not be avoided. We are ready to help you!
We guarantee reliability and high quality of materials and work. We are the representatives of most well-known brands in Vladimir, that’s why we have direct delivery of spare parts from the factories, and our craftsmen are constantly improving their skills. All this helps us to repair any garden equipment qualitatively and on time.
Gardening Equipment Repair in Vladimir. Why we?
- We not only sell you high-quality products from the world’s leading manufacturers of gardening and farming equipment, but also offer the services of our service center.
- Our work procedure for incoming repairs. Technical inspection for faults, selection of spare parts, direct repair of faulty equipment.
- We pick up and bring back your equipment. We understand how difficult it can be to get a bulky load to a service center, so we take care of the problem.
- We deal not only with solving typical problems that occur during work (malfunctioning tractor engine, gearbox oil leak, carburetor misadjustment, etc.), but also quickly find solution for non-standard problems related to tool operation.
- Exchange technique for the repair time. Our service center provides customers who have bought machines (primarily for tractors and tillers) with a temporary replacement for the time of repair
Frequent questions that arise from owners of defective equipment:
- What engine will fit my single axle tractor or power tiller? The variety of engines catches my eye. What to buy, so that it is reliable and not expensive? Everywhere I go, everyone praises his own!
- Where to buy spare parts for single axle tractor or power tiller. They only sell machinery everywhere, but no spare parts.
- To change the engine on your power tiller, adjust the cables, buy an adapter for a new engine.
An overview of other haymaking solutions
If the configuration of a power tiller or power tiller does not include a sufficient number of attachments, the owners must either buy different attachments or make them by hand, taking into account specific needs. Every owner can do it in his or her own way.
Thanks to the possibilities of modern production, consumers are offered a wide range of options for mowing cultivated and wild grass, windrowing, mowing and chopping weeds, transportation to the place of storage. Bale and roll balers pack hay and straw compactly, tedders turn hay for optimal drying.
Rake Rake Rake
Depending on the way of assembling, nozzles can be belt-type, side-type, cross-type with tedders. Some models can be used not only for collecting hay, but also for cleaning and snow removal, not worse than standard auger snow blowers. On the specialized network you can find a huge range of attachments for power tillers for the most demanding and fastidious owners.
Homemade mowing heads and devices for mowing, haymaking and baling are hard to classify. craftsmen and craftsmen manage to create unique multi-functional equipment, the price of which is much lower than factory-made, and the quality of construction and operation are not inferior to industrial models.
In addition to the most common models of rotary (disc) and segment mowers, there are also chain mowers. It is quite a rare option, because chain mowers are very traumatic. Chain mowers work as a grass chopper, they require more power, and are often used in combination with tractors or mini-tractors.
Make sure that the plan and sequence of actions in creating a rake for a power tiller is clearly thought out:
PTO single axle tractor Motor Sich device photo.
PTO shaft single axle tractor Motor Sich device photo.
All heavy motor Sich power tillers are equipped with PTO, which increases the power capacity of power tillers.
Switching on the PTO on the motor power tillers is carried out by a lever located on the transmission body on the right side in the course of the engine block. On the inclusion and improvement of the mechanism for engaging the PTO on the tractor can be found in the article on this site PTO inclusion
In this article, I only want to show how the PTO drive is set up, its housing, the so-called PTO coupling.
Characteristics of PTO, aka PTO shaft of single axle tractor Motor Sich
- involute splined connection, centered on tooth flanks 22Х1,5Х9H/9h
- rotation frequency, rpm n=1000
- number of splines Z=13
D = 22 mm, m = 1.5 mm involute spline connection centered on the sides of the teeth, with a 9H/9g fit on the sides of the teeth:
Connections 22H1,5 9H/9g GOST 6033. 80
bushes 22H1,5 9H GOST 6033. 80
shaft 22Х1,5 9g GOST 6033. 80
Just want to add that all active attachments to MTZ and AGRO, suitable for single axle tractor Motor Sich, the only thing you need an adapter, as motobloks Motor Sich external spline on the PTO, and MTZ and AGRO motor blocks internal.
This is not a big problem, a good example of the use of such an adapter to the power takeoff shaft of a power tiller motor Sich potato harvester aggregated with MB.
If there are any questions or additions, please feel free to write in the Комментарии и мнения владельцев.
Best models ranking for 2022
If you are not sure you understand how to make an adapter yourself, it is better to refer to ready-made variants. Today the market offers a wide range of products from the best manufacturers. There’s no point in asking which company’s adapter is better, because each manufacturer offers a product designed for specific models (although they can offer universal units).
There are many varieties of such devices: different load capacity, different power, with the body, without the body, long, short, etc.п. Different models have different functionality and direction of work, as well as different diameter of the coupling mechanism (unless it is a universal coupling mechanism). The most popular are usually suitable for both tillage and transportation. They have a body and cost more, while the bodyless variants are only suitable for cultivation and are not as expensive.
This review presents only the best and highest quality (in terms of buyers and popularity) models available in 2022, as well as our recommendations on how to choose a decent unit at the right price.
One more qualitative Russian product, produced on Machine-Building Factory of Kirov region. Gagarin (Smolensk obl.). The device does not differ in purpose from the two previous models. Equipped with a mechanism for adjusting the length and height when installing the hitch, which allows it to be equally freely coupled to any type of MB. from the lightest to the heaviest.
Due to its versatility, the APM 350-PRO is considered a class above the already listed devices, although they are not inferior to it in terms of functionality. Nevertheless, this does not affect the cost.
Another important nuance: since the company that produces this series also produces Mobil K power tillers, an attachment has been produced especially for them from the factory, which makes the rotary mower much easier to work with. Most of them have a classic design, completely unsuitable for connecting rotary mowers, while this model in combination with the Mobil K-series power harvesters has a special boom that allows you to raise the mower over the area of mowed grass at turns, so you do not need to remove the mower. Very comfortable and practical.
| Length | 160 cm |
| Width | 70 cm |
| Weight | 45 kg |
| Price | 17 500/piece |
- Has a mechanism for adjusting the length and height of the clutch;
- is versatile;
- comes with an attachment to work with the mower on the MB Mobil K.
Another brainchild of Gagarin Machine Building Plant. riding adapter APM-350 with a body. Many owners of garden equipment do not consider the presence of a built-in trailer vital, because it can always be purchased. The average cost of a trailer varies, depending on the total weight of the goods transported and the width of the trailer itself (usually from 260 to 500 kg). The problem is that any owner rather quickly gets tired of walking after the MB, after which he will want to buy a trailer. And this is one of the most common mistakes when choosing adapters.
Since in this article we do not just describe the existing types, but also recommend which is better to buy, here is our advice for those who need a single-axle tractor with trailer: buy options immediately with the body! Although it will cost a bit more compared to a regular trailer, but it will be much more cost effective than buying both the trailer and the adapter separately.
APM-350 is an excellent representative of this “combined” type. Its lifting capacity is 350 kg. The dimensions of the body are 800 x 1000 mm. Includes the following components: frame, floating attachment, operator’s seat, belt brakes and body.
Manufacturer guarantees compatibility with MB of the following series: AGAT, OKA, Neva, AVANGARD and Celina. Both passive and active equipment can be installed. Combined with power tillers with UGRA and MTZ universal joint shafts without any problems. However, such machines can only be used with a passive hitch (that is, having no moving parts and working only with direct motion of the tiller in the field: plow, ridger, potato trowel, etc.).
| Width | 700 cm |
| Brakes | ribbon |
| Weight | 92 kg |
| Body type | tipping, non-galvanized |
| Price | 23 120 /sht |
The first in the top is Celina PM-05. classical and inexpensive option for those who need budget “workhorse” with good riding qualities. It has a fairly simple design: frame, brakes, seat and elevator. The operator’s chair is adjustable. “Tselina” is equipped with wheels 4.00 x 10 or 19 x 7.008, complete with wheel weights.
In reviews of the product there is mention of a rather weak braking mechanism and not very good quality floating hitch system. Active attachments (that is, all those tools that are powered by a rotating mechanism: rotary mower, sweeping brush, snow blower, etc.).) here is installed only on the drawbar, from the front of the motor block. Models with this design include units of the following series: MB, Neva, Agat, Celina, Avangard, Mobil K.
| Width | 62 cm |
| Brakes | Ribbon |
| Weight | 50 kg |
| Price | 12 450 /sht |
| Working speed | 10 km/h |
| Dimensions | 165 x 75 x 110 cm |
AM-2 has practically the same general characteristics as the already mentioned “Tselina”, although it has a higher price. Complete with wheels 4.00 x 8, 4.00 х 10, 5.00 х 10, 5.00 х 12. Use with any power tillers over 4kW (for MTZ, Motor Sich, Grasshopper and others). It has a steering wheel, 3 pedals for clutch and reverse. Throttle throttle is installed, possibility of installing active attachments is available.
Easy to operate, no additional equipment costs. It is equipped with a lever for lifting/lowering the linkage, which greatly facilitates the work in the field and allows to move freely throughout the agricultural area.
| Width | 83 cm |
| Brakes | disks |
| Weight | 70 kg |
| Price | 21490/piece. |
All-wheel-drive AMPK-1 with steering control is a development of Kaluga machine-building company “Kadvi” (Kaluga engine), designed exclusively for Ugra motor-blocks. About the latter it is necessary to note an important point: MB UGRA are equipped with two PTO shafts. upper and lower, while in most cases there is only one leading PTO. Upper shaft is used for attaching the linkage, but the lower one is designed just for coupling with AMPK-1. it transmits the torque.
The machine is sold at a relatively high price, but it has all the features of top units: good cross-country ability to practically on any ground; possibility of using it not only for cultivation, but also for cross-country transportation; overall convenience and high quality of materials and assembly; comfortable seat. in sitting position the operator does not feel discomfort.
Construction of AMPK-1: frame, operator’s seat, drive shaft, gearbox, floating clutch mechanism, brakes, wheel set. Speaking of wheels, the Kaluga machine-building company provides two options for this model: on 4.00 x 10 and 19 x 7.008.
To summarize, the combination of Ugra and AMPK-1 with off-road driving function, allows the owner to get into almost any hard-to-reach places without much trouble, due to which it is often compared to a mini-tractor by purpose (which makes sense, because Ugra has about the same functionality, but also has cheaper attachments). Thanks to its good tractive force and all-wheel drive, the machine is able to negotiate rough terrain with ease. On the ground the situation is a bit worse: Active devices cannot be connected, so if you want to connect a mower, snowplow or potato weeder, you first have to disconnect the adapter and work in the old way. on foot, dragging a single-axle tractor for comfortable work. But any passive tools dock without any problems. So, whether or not to take it depends on your personal criteria of choice.
| Width | 116 cm |
| Weight | 80 kg |
| Brakes | ribbon |
| Price | 34 390 /pc |
TANDEM PM-06 Celina has the body in the front, while the drawbar is in the rear. It’s designed for plowing and off-road use. Machine control. steering.
The module connects to MB series machines: OKA, AVANGARD, Neva, Celina, AGAT. Its main advantage is that it is front-engine, i.e. with drive on the rear axle, the axle of the power tiller. Thanks to this feature, the movement on the road, especially after rain or in the countryside dirt is much better.
It has its disadvantages as well. The most noticeable of them is that the connection between MB and adapter is made only through drawbar, that is the place on which all active tools such as mowers, snow blowers, brushes and others are hinged. It means that it is impossible to use PM-06 and specified equipment at the same time (though there was such an opportunity in Tselina PM-05 model).
Thus, we have actually a mini-tractor, which is attached to the passive tools for plowing, weeding, loosening the ground, and so on. If you use it just for such purposes, then there is not the slightest complaint about the quality. If we consider it solely as a vehicle for off-roading, it can also be rated very high. high maneuverability, excellent cross-country ability. However, the price of this unit is rather high, which is determined by its high load capacity (300 kg).
| Width | 75 cm |
| Weight | 58 kg |
| Brakes | disk brakes on the rear axle |
| Price | 26 290 /sht |
Horse-AM IS-2 is produced by Guryevsky metallurgical plant. Is a mini-trailer with a driver’s seat and steering wheel. Used for farming. Works on plots in almost any climate. Attaches to MTZ, turning it into a real mini-tractor. Handlebar has a comfortable motorcycle-style shape and is flush with the seat.
The control system is convenient and intuitive. In addition to passive plowing equipment can be used with active attachments. A complete list of available equipment is available on the website.
IS-2 is notable for its small size, very conveniently made steering, has a rather low weight. Generally versatile and can be used by seasoned gardeners and beginners alike.
| Width | 90 cm |
| Weight | 70 kg |
| Brakes | Tape |
| Price | 36,990 /pc |