Aeg Angle Grinder Variable Speed

Angle grinder (angle grinder). she’s an “angle grinder”. it is a power tool that is a type of grinder. The set of its “functionality” includes various operations related to cutting, cleaning and grinding of parts from any materials. Scope: metalworking, construction, domestic needs.

Aeg Angle Grinder Variable Speed

Scope of application. angle grinder professional and household

angle grinder refers to universal use tools. this machine is capable of performing a large list of operations. True, for their various types it is necessary to change the working “organs” themselves. nozzles. Then the angle grinder cuts, grinds, cleans stone, metal, wood and other materials.

In everyday life, this tool is not used every day, but if necessary, you can not do without it. the age of manual labor is a thing of the past. Angle grinder saves you time and effort.

Depending on the mode of use and power of the engine and other components, an angle grinder is distinguished:

  • domestic use;
  • industrial use.

Household "Bulgarian". these are mainly devices of small power, "elegant" convenient sizes. They will not survive in the industrial sector, as they are demanding on the mode of their operation. we work for about 15 minutes and rest for the same amount. Otherwise. overheating and

device diagram angle grinder

Industrial angle grinders are workaholics. Such tools are able to work productively for a long time without interruption and overheating. These qualities of a professional tool in the case of angle grinders are put on the scales and two other parameters: weight and cost. They are also increasing their importance in the “professional” category.

When choosing a tool, you should focus on the convenience of working with it and its effective capabilities in work. Price factor. also not an unimportant detail. Professional equipment breaks down, of course, less often, but its repair is more expensive.

We will understand the nuances of choosing a tool

Cutting plane should be directed away from the face

Signs of classification

Any electromechanical tool is characterized by many parameters, among which the power of the device never lasts. Let’s start with her!

Power

The power of an angle grinder determines its interrelated parameters: capabilities (productivity), dimensions, weight. Existing models of angle grinder fit in a power range from 0.5 kW to 2.7 kW.

Common “household” representatives of this tool are capable of developing from 800 to 1000 W of effective power sufficient to perform most operations in a household environment. For long-term “industrial” or heavy domestic work (we cut concrete, brick, etc.), you should choose an angle grinder with a power of 1.5 kW or more.

But this parameter. power is an interconnected, but not the main characteristic, angle grinder. The determining technological parameter is the maximum diameter of the installed disk.

What is the best diameter for a disc grinder: 115, 125, 150, 180 or 230 mm

For an angle grinder, discs with a diameter of 115 mm to 230 mm are used. Practically capable of cutting only part of the disc, an angle grinder protruding beyond the housing.

Therefore, when choosing a 115 mm disc, you can cut through the thickness of the material no more than 25-30 mm. In the process of using the disk, this parameter decreases, since the disk wears out (erases), and given the number of revolutions and the performance of such units, this happens quite quickly. a couple of minutes and the disk “disappeared”.

Makita. EXAMPLE OF PROFESSIONALISM IN THE LINE OF LEADERS

When choosing a tool, you must first analyze its future tasks and choose the right diameter:

  • 115 mm. convenient for grinding, suitable for cutting only "small" parts. The tool for such disks has low power and, accordingly, is “convenient” to work with;
  • 125 mm is a popular size. The angle grinder for such a disc is ideal for home use. And all varieties of grinding and cutting discs are maximally adapted precisely for this diameter;
  • 150 mm. a certain middle between the 125th and 180th disk. You can take it for home, but for greater convenience, if you have financial capabilities, it is better to choose two separate tools;
  • 180 mm. inconvenient for small jobs, optimal for construction and industrial use. Able to cut both a pipe and a brick;
  • 230 mm. the maximum size of the "grinder" circle. Such an angle grinder will be ideal for large-scale construction work and ineffective in terms of ergonomics when performing small work.
READ  How to Remove Bearing from Anchor Angle Grinder

In principle, the choice of the required disk diameter should begin with the choice of an angle grinder, and then “add” its power to the analysis. If an angle grinder of 600 W is suitable for one-time work in a circle of 125 mm, then for long-term work in the same circle it is advisable to choose a tool of 1-1.5 kW. A more powerful angle grinder will be less "tired" under load and, accordingly, the cycles of its work will be longer, and the period of "life" is longer.

Attention! In no case can you use larger discs on angle grinders designed to work with smaller discs. This will require the angle grinder, which is unacceptable from the point of view of safety and common sense, to remove the protective cover, and the imbalance and inconsistency of the parameters can lead to inadequate “actions” of the tool when the disk is jammed.

Function disc options for angle grinder

In work with an angular grinder the following types of disks are used:

  • cutting metal;
  • cutting stone;
  • stone for dry work;
  • stone for wet cutting;
  • combined diamond wheel for cutting tiles;
  • blade type discs;
  • mandrel for wheels with Velcro;
  • metal wire brush for cleaning the disk or cup form factor.

An important point to choose! If you are planning a “dusty” work related to cutting stone, brick, plaster, worry about the presence of a dust protection tool in your chosen model for such work. An unprotected angle grinder will not last long in a dusty environment.

Spindle speed angle grinder

When choosing an angle grinder, you are unlikely to pay attention to the number of revolutions of its spindle. This, of course, is an important parameter in the work of the tool, but it is already optimized by the manufacturer for a specific model of an angle grinder.

An interesting from a practical point of view is the ability to smoothly adjust the speed. This function may have a powerful angle grinder, but more on that below.

For general information: the disk rotation speed of the angle grinder is in the range from 2800 rpm to 6600 rpm. Some models of disc grinders up to 125 mm have a speed of up to 11,000 rpm.

Ergonomics and safety

Since the angle grinder is still a hand tool, its ease of use is determined by the "organs" of interaction with a person.

Easy handling and reliable protection

For convenient operation and reliable holding of the tool in the hands, the angle grinder should be equipped with practical handles. Their well-thought-out options also play an anti-vibration role.

Video: Aeg Angle Grinder Variable Speed


Ergonomics in the pen

The provided options for right-handed and left-handed installation of handles will make it equally comfortable to operate the tool for “left-handed people” and traditional “right-handed people”.

Option two-handed angle grinder

When choosing an angle grinder, it is also necessary to take into account its mass. An angle grinder with a power of 0.6-0.8 kW weighs about 1.4-2 kg and usually has one handle. Such a tool is best suited for grinding. “Kilowatt” power angle grinder will create a load on the hands of 1.9-2.3 kg. And the "giants" of 2-3 kW will not have less than 3.5 kg.

The presence of a protective cover on the angle grinder is required! Without it, you will play Russian roulette with your life. The fact is that the discs for the angle grinder are quite thin, but they rotate at great speed. A poor-quality disk or its defect can lead to rupture and scattering of fragments, which will inevitably lead to injuries. Therefore, the presence of a casing is not discussed.

Minimum dust in work

When working on stone, brick or plaster, it makes sense to purchase a casing that allows you to connect a vacuum cleaner hose to yourself. Such casings are suitable for 230 mm discs and may also have a guide ruler for uniform cutting of grooves.

READ  How to Cut Porcelain Tiles Angle Grinder Without Chips

Protective guard with guide

Changing discs to an angle grinder

Serviceability of the tool determines the additional time spent on "recharge". disk change. In this angle grinder, a spindle lock device is provided for this. By pressing the stop button, the driven gear is locked, and the nut is unscrewed with a wrench.

There are options for clamping nuts that allow you to work with yourself without a key. Such a composite nut is clamped by hand, and when the lower part of the nut stops on the surface of the disk, it is retracted by rotation of the upper part by hand. Such systems are especially relevant for frequent changes of disks on the instrument.

The standard angle grinder nut works for self-tightening, which leads to more difficult loosening than tightening.

Functional and protective automation

Convenience and safety of working with the tool contribute to additional functional "bells and whistles" of the tool.

Smooth start

An angle grinder equipped with a soft start system suffers less from short-term critical overloads at the time of launch. It is especially important to equip a similar system of powerful grinders with a significant mass of parts and the disc itself. Then, when turned on, the angle grinder gains speed smoothly, does not twitch in the hands, and the motor windings and brushes do not experience strong current surges.

Speed ​​adjustment

The angular grinder engine speed control system allows you to choose the spindle speed for any task: cutting, grinding, grinding, etc. These are additional amenities designed to optimize tool operating modes.

Speed ​​stabilization

The system of stabilization of the spindle speed when changing the load on the disk greatly facilitates the processing of massive labor-intensive parts.

Disk wedge protection

Jamming of the disk in the material slot is a very dangerous phenomenon, especially for powerful grinders. The tool will simply escape from its hands with unpredictable consequences. To avoid this, a professional tool is equipped with a protection system against jamming of the cutting disc. In the case of a "wedge", the instrument simply instantly de-energizes.

Re-start fuse

If the power supply to the tool was stopped at the time of its operation (for example, someone pulled the plug out of the socket), then when the power supply is restored, the angle grinder can be protected by a safety system from spontaneous secondary start-up.

Brush protection

The branded tool can be equipped with a safety system for disconnecting the motor brushes when the supply voltage is lost. Re-inclusion of the rotating collector of a powerful engine threatens to burn the contact group. A brush shut-off system may also be provided for significant wear.

Balancing system

In the process of working with powerful angle grinders, the disk is generated unevenly, and certain tool vibrations occur that do not positively affect the quality of work. To eliminate them, well-known tool manufacturers use a balancing system designed to dampen these vibrations.

Dust protection

Not all angle grinders have reliable protection against dust, which determines their unsuitability for cutting stone, brick or plaster. When choosing a tool, it is necessary to clarify this point if it is necessary to carry out "dusty" work.

Some innovations from the manufacturer in the protection of the engine (video):

Cordless Angle Grinder

A cordless tool is useful in two cases:

  • in the absence of the ability to connect to the network;
  • to eliminate the inconvenience of "transportation" for the network cable tool (for example, during high-altitude work).

Complete Battery Devolt Kit

Cordless angle grinders are classified in the same way as network options. Another parameter is added to their parameters. the time of continuous operation from one set of batteries. And this is a huge minus for them. a short battery life. An increase in its capacity will lead to an unjustified increase in the mass and cost of the tool.

Therefore, you should choose a cordless angle grinder in cases of urgent need or in the presence of a sufficient number of replaceable batteries.

Makita without "binding" to the network

An alternative to using a cordless angle grinder can be the use of a diesel or gasoline portable electric generator of the appropriate power (note the significant starting currents of the angle grinder) to connect a power tool to it.

And the angle grinder are named Panasonic

Pneumatic angle grinder

The pneumatic angle grinder is able to work for a long time without overheating under severe load conditions. They received the greatest distribution in the metalworking industry, but can also be used in the repair and construction and other fields of activity.

READ  How to Clean Scales From an Angle Grinder From a Glass

angle grinder in the pneumatic tool family

Its distinctive feature is the lack of an electric network cable and the possibility of complete isolation from the compressor or the air line. This tool can be used safely in high humidity conditions. The pneumatic angle grinder also has a higher spindle speed.

Gasoline carvers

A gasoline cutter is, of course, not an angle grinder and it is not intended for home use. But this professional tool allows you to perform some similar operations of separation of solid materials, capable of long-term autonomous work, has a sufficiently large power.

Gas cutter. distant "relative" functional angle grinder

A few points to make the right choice.

All the parameters of the tool listed above may have helped you navigate the functional equipment of the grinders, but did not bring clarity and specificity to the selection process. All angle grinders are initially similar, and you will be able to evaluate the correct choice only during the long-term operation of the tool. But, nevertheless, let’s try to concretize the selection algorithm:

  • We determine the required diameter of the disk. 125 mm is best suited for a house.
  • Based on the operating mode, we determine the power.
  • Determined by the need and the presence of additional functions.
  • We are looking for models, trusted brands. in fact, everything matched to you will suit you, but.
  • We look at the convenience of their body and the location of the handles.
  • We get acquainted with the conditions and duration of the warranty.
  • Choose!

Which angle grinder is better: Makita, Bosch, Hitachi, Metabo or Devolt

From the whole assortment it is definitely impossible to determine which is the best angle grinder. This choice is individual and each model of a quality tool has its advantages and disadvantages. Considering the range of leading manufacturers Makita, Bosch, Hitachi, Metabo or Devolt, we can say that there is plenty to choose from.

Complete mince will require significant investment in the instrument. Cost optimization is possible by selecting the optimal combination of functions in different models and abandoning those that are not so important for you in the household use of the tool.

Popular Hitachi with its always thought-out “elegant”, but comfortable appearance pleasing to the eye and create additional comfort in work. 125-mm models have speeds up to 10,000 rpm with power consumption of 650-800 W and weight up to 1.6 kg.

the angle grinder for the 230 mm disc will already “take” 2000 W from the network, providing 6600 rpm of idling. Its mass is 4.3 kg.

Distinctive features of Hitachi in the example of this video:

Let us dwell on the 125 mm Makita. Here, the power range of popular models is in the range of 710-1400 watts with a tool weight of 1.4 kg to 1.8 kg. They are designed for long-term intensive operation, they have a significant power reserve, stabilization of the number of revolutions, a system for limiting inrush current and other useful innovations. The Heavyweight on Makita’s 230th wheels will provide 6,600 rpm with a power of 2.6 kW. The mass of such an angle grinder is more than 5 kg.

About the advantages of Makita angle grinder (video):

In fact, all Metabo models are equipped with soft start systems, many are “able” to change the working disk without a key and smoothly control the speed.

A bit about Metabo using a specific example:

Bosch is embarrassed by the presence of a wide variety in the range of models of an angle grinder. But you will not be mistaken, choosing this brand, you will simply be determined for a long time with the choice of a specific model.

To view a single instance, watch the video:

American “yellow” Dewalt offers a number of reliable production models without unnecessary “bells and whistles” that will satisfy the most demanding consumer.

Watch the introductory video about the DeWALT Small Angle Grinder:

Note! All angle grinders are tools of increased mechanical danger and require careful and careful handling. Observance of precautionary measures during the work with the angular grinder is your life and health. And the non-use of goggles or masks. tremendous stupidity and frivolity, the price of which can be quite high.

Friends will be interested too

Would you like to receive current ratings and selection tips? Subscribe to our Telegram.