angle grinder felisatti 125 with speed control
The best deals for Felisatti AG115 / 1200CE
Felisatti AG115 / 1200CE
- Angle Grinder
- power 1200 W
- disk rotation speed up to 11000 rpm
- disc diameter up to 115 mm
- weight: 2.4 kg
Reviews of Felisatti AG115 / 1200CE
Advantages:
speed regulator
smooth start. the disc spins up in 3-5 seconds
heavy and seemingly robust design
powerful
Disadvantages:
Disc 115. 1200 watts and 115 disc. This is some kind of child’s size, nothing to put normal. that is, when you have more than one angle grinder, you must always remember. cups and diamond circles (those that already exist) suddenly do not fit. this jamb is corrected by removing the casing
casing. some very stupid, 4 bolts, some kind of plate, the slots of the bolts on the seals, quickly rearranging to a different angle is unrealistic.
the handle is ordinary, black, do not screw it on the side. either top or bottom
the body of the angle grinder is thick. do not grasp with your hand. well, this is already nit-picking, 700-800 watts can be grabbed
Comment:
bought a week ago, haven’t felt it yet. bought because of the speed regulator, not expensive. bye all right
Advantages:
smooth start, powerful, speed regulator, seemingly inspires reliability, long cord
Disadvantages:
heavy, dismantling the casing is inconvenient
Comment:
I got this device a week ago. Naturally, this is not an indicator for a full assessment. In general, I can say that it is worth its price, gave 2400r for it. The consultant said that according to the characteristics, a good analogue of Makita would cost under 8. Well, to be honest, this raises a smile, no more. There are idiots for such a price. Now about the angle grinder itself. The assembly is good, the gaps are minimal, everything fits snugly, powerful, there are no beats and backlashes. There is a speed regulator, for some reason it is indicated not by numbers but by letters (A, B, C. G) Another huge plus is the switch, the so-called foolproof, apparently so as not to tear off your fingers. When you unplug the plug with the button on while reconnecting the plug, it will not work. until you turn the button off and on again. A soft start is also provided, which is also more convenient, safer and more durable. The wire, in comparison with others, is long, not like some short ones. Of the minuses, I did not like the attachment of the protective casing to remove it. 3 screws (also Torex, why guys ??) I understand everything, safety precautions and so on. Have you ever seen one working angle grinder with a cover? But what about extreme in Russian)) In addition, I have 125 discs on it, of course I had to dismantle the casing, you still have to work with goggles, or with one eye, closing my eyes when I forgot my glasses)). Of course, its weight can be attributed to a minus, but it depends on how you look at it. in fact, it is really hard, but this, as they say, is the key to the success of its long work. a high-quality item should not weigh 1.5 kg. Hopefully he’ll beat himself off and not die in a couple of years. Before that, Diold MSHU-0.95-125 also worked with the regulator for 2 years, the disk stopper button immediately flew off, the regulator flew at the end, a week later the collector started smoking, sawing the tiles in the bathroom, probably a consequence of moisture and dust entering the air intake. Therefore, at least sometimes vacuum your workers so that they last longer, do not get sick and do not die))
Advantages:
Price
Power
Speed control
No bushings. completely on bearings
Disadvantages:
Shroud 115, but can be replaced with 125mm from another angle grinder
There is actually no thermal protection, instead of the sensor there is a jumper
The lubricant must be changed to normal immediately.
No anchor armor
Comment:
I bought it for 2800r, bribed with the presence of protections and power
With the protections, everything is fine except for thermal protection, there is no stator temperature sensor (the jumper is installed)
BISON angle grinder-P230-2400 PV
- Electric motor power. 2.4 kW.
- Disk rotation speed. up to 6000 rpm.
- Disc diameter. up to 230 mm.
- Weight. 4.5 kg.
Powerful professional tool for any job with a comfortable vibration-damping handle.
Most craftsmen recognize the decisive factors when choosing an angle grinder:
- Convenience of working with the tool.
Sturm! AG95141P
- Electric motor power. 1100 W.
- Disk rotation speed. up to 11000 rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.5 kg.
Powerful, reliable, budget angle grinder. Cons: not very convenient Start button.
RWS angle grinder-125/900
- Electric motor power. 900 W.
- Disk rotation speed. up to 11000 rpm.
The power of the angle grinder is enough for work at home and in the garage. Low noise level and the electric motor works without vibration. Acceptable price. The only negative is the short cord.
PATRIOT AG 122
- Electric motor power. 860 W.
- Disk rotation speed. up to 11000 rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.3 kg.
The power of the angle grinder is sufficient for most jobs. Low noise level. Ergonomic. Cons: too heavy and not suitable for long-term operation for several hours.
LEPSE MSHU-2-230
- Electric motor power. 2000 W.
- Disk rotation speed. up to 6600 rpm.
- Disc diameter. up to 230 mm.
- Weight. 5.5 kg.
Powerful and reliable angle grinder for home, garage and summer cottages. However, poor ergonomics and excessive weight make this instrument less attractive.
Choosing an angle grinder with speed control and smooth start
When working with metals, even in small workshops, a reliable power tool is required. Choosing an angle grinder with a soft start is not difficult, given that there are many models from different manufacturers on the market. There are general principles that should be followed when looking for a suitable device.
What models are popular in Russia: top 10
Most of the power tools sold in the Russian Federation are manufactured in the PRC. Only a small part is assembled in Russia from Chinese spare parts. But 10-15 models have been on sale for a long time and have proven themselves well.
Angle grinder with speed control Felisatti angle grinder-125 / 1100E
Reliable small one-hand angle grinder with variable speed. It is used for abrasive cutting of metal products, for grinding, cleaning welded seams, working with brushes and flap wheels.
Continuous operation.
Electronic speed control combined with starting current limitation.
Small size allows you to work in confined spaces.
The most demanded circle size 125 mm.
Spindle lock button for tool change.
Three options for installing an additional handle.
Keyless cover mounting.
Constant electronic unit functions:
– adjustment of turns in a wide range;
– maintaining speed under load (magnetic sensor);
– soft start and starting current limitation.
Rated voltage: 220V / 50Hz
Rated power consumption: 1100 W
Rated current consumption: 5.0 A
Maximum O disk: 125mm
Grinding wheel bore: 22.2 mm
Spindle thread length: 14mm
O spindle thread: M14
Grinding wheel idle speed: 3000-10,000 rpm
Marked working speed: 80 m / s
Soft start: yes
Inrush current limitation: yes
Switch fixation: yes
Speed control: yes
Restart protection: yes
Maintaining speed: yes
Overload protection: yes
Weight: 2.2 kg
Angle grinder
Manual
Safety instructions
Warranty card
List of service workshops
Protective cover (for grinding work)
Additional handle
Special key
Grinding wheel fastening nut
Abrasive disc support flange
Packaging
1) Buy in Zhodino. Purchase at low garden equipment, trimmers, chainsaws, lawn mowers, wheelbarrows, concrete mixers. power tools and batteries can be found at the address: Zhodino. 1-25 Syrokvash St. (entrance from the end of the building) Velcom 3911-661; MTC 5-446-446
2.) Order with delivery in Minsk by t.
MTC 770-61-42; Velcom 658-54-70; Life :).
3.) Buy in Minsk MTC 770-61-42; Velcom 658-54-70;
You can buy without delivery (check availability) at the warehouse from 10: 00-18: 00 Sobinova st. 62 (3 minutes from Bangalore square) Driving directions area of Bogdanovich streets. Khalturin. public transport stop “Basic”.
Free parking right in front of the warehouse.
Angle grinder Felisatti angle grinder-125 / 1400E (M)
- Rated voltage: 220V / 50Hz
- Rated power consumption: 1400 W
- Maximum disc Ø: 125 mm
- Grinding wheel bore: 22.2 mm
- Spindle thread length: 14mm
- Spindle thread Ø: M14
- Grinding wheel idle speed: 2000.9000 rpm
- Marked working speed: 80 m / s
- Soft start: yes
- Inrush current limitation: yes
- Switch fixation: yes
- Speed control: yes
- Restart protection: yes
- Maintaining speed: yes
- Overload protection: yes
- Jam protection: yes
- Machine safety class: II
- Weight: 2.2 kg
Professional one-hand angle grinder with speed control and speed control under load. It is used for abrasive cutting of various materials, for grinding, cleaning welded seams.
Dedicated powerful high-performance motor for continuous operation.
Aluminum alloy gear housing and bottom cover.
Two options for installing an additional handle.
Reduced noise level due to helical bevel gear.
Spindle on two rolling bearings. needle (rear) and ball (front).
Additional protection of stator windings.
Spindle lock with button for tool change.
Rubber-insulated power cord 3 meters.
Spindle labyrinth seal.
Functions of a constant electronic unit based on a magnetic Hall sensor:
– adjustment of turns in a wide range;
– maintaining speed under load (magnetic sensor);
– smooth start and starting current limitation;
– motor protection against dynamic overload;
– protection of the machine against restarting.
Equipment
Angle grinder
Manual
Safety instructions
Warranty card
List of service workshops
Protective cover (for grinding work)
Additional handle
Special key
Packaging
Angle grinder Felisatti angle grinder-125 / 1400EL
Angle grinder Felisatti angle grinder-125 / 1400EL. universal professional-level angle grinder.
The machine is dustproof and recommended for abrasive processing of a wide variety of materials. It works well as a universal tool, starting from dismantling metal structures and dismantling utilities, working with stone (concrete) and ending with cleaning surfaces with flap circles.
Pouring the stator windings and the front of the rotor protects the motor from the damaging effects of dust and sludge.
Magnesium alloy gear housing and bottom cover.
Reduced noise level due to helical bevel gear.
Sealed rolling bearing on spindle.
Special high-performance motor for continuous operation.
Spindle lock for tool change in two ways: with a button or a key on the flats.
Rubberized main handle body.
Three options for installing an additional handle.
Brushes automatically disconnected due to wear.
Covers for quick change of brushes without disassembly angle grinder.
Rubber-insulated power cord 3 meters.
Spindle labyrinth seal.
Keyless cover mounting.
Functions of a constant electronic unit based on a magnetic Hall sensor:
– adjustment of turns in a wide range;
– maintaining speed under load (magnetic sensor);
– smooth start and starting current limitation;
– motor protection against dynamic overload;
– protection of the machine against restarting.
Rated voltage: 220V / 50Hz
Rated power consumption: 1400 W
Rated current consumption: 5.0 A
Maximum disc Ø: 125 mm
Grinding wheel bore: 22.2 mm
Spindle thread length: 14mm
Spindle thread Ø: M14
Grinding wheel idle speed: 2000.9000 rpm
Marked working speed: 80 m / s
Soft start: yes
Inrush current limitation: yes
Speed control: yes
Soft start: yes
Inrush current limitation: yes
Switch fixation: yes
Speed control: yes
Restart protection: yes
Maintaining speed: yes
Overload protection: yes
Jam protection: yes
Weight: 2.3 kg
Angle grinder
Manual
Safety instructions
Warranty card
List of service workshops
Protective cover (for grinding work)
Additional handle
Special key
Clamping flange
Support flange
Packaging
Classification and features
There are 3 types of angle grinder:
- Lungs. Their weight does not exceed 3 kg. Supplied with cutting disc 115-125 mm in diameter.
- Average. Models up to 5 kg with a disc diameter of 150-180 mm.
- Heavy. Weighs 5-6 kg and are equipped with a disc with a diameter of 230 mm.
The standard diameter of the cutting disc is 125 and 150 mm. Depending on the presence or absence of additional characteristics, the angle grinder is divided into household and professional.
Angle grinders
Speed control: No, Power consumption, kW: 0.8, Maximum disk diameter, mm: 125, Diameter of the disk seat, mm: 22, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 11000
Speed control: Yes, Power consumption, kW: 0.95, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22, Voltage, V: 220, Engine soft start: No, Maximum rotation speed, rpm: 11000
Speed control: No, Power consumption, kW: 0.85, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 11000
Speed control: No, Power consumption, kW: 1, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22, Voltage, V: 220, Engine soft start: No, Maximum rotation speed, rpm: 11000
Speed control: No, Power consumption, kW: 1, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 10000
Speed control: No, Power consumption, kW: 0.9, Maximum disk diameter, mm: 125, Voltage, V: 230, Smooth engine start: Yes, Maximum rotation speed, rpm: 11000, Minimum rotation speed, rpm: 11000
Speed control: Yes, Power consumption, kW: 1.2, Maximum disk diameter, mm: 150, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 9000, Minimum rotation speed, rpm: 3000
Speed control: Yes, Power consumption, kW: 1.1, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22.2, Voltage, V: 220, Smooth engine start: Yes, Maximum rotation speed, rpm : 10000
Speed control: No, Power consumption, kW: 2.3, Maximum disk diameter, mm: 230, Smooth engine start: No, Maximum rotation speed, rpm: 6500, Spindle thread length, mm: 14, Spindle thread diameter, mm: M14
Variable Speed Grinders. How to extend their life
Speed control: No, Motor soft start: No, Switch hold: No, Rotary main handle: No, Overheat protection: No, Overload protection: No
Speed control: No, Motor soft start: No, Switch hold: No, Rotary main handle: No, Overheat protection: No, Overload protection: No
Speed control: No, Motor soft start: No, Switch hold: No, Rotary main handle: No, Overheat protection: No, Overload protection: No
Speed control: No, Power consumption, kW: 2.1, Maximum disc diameter, mm: 230, Disc seat diameter, mm: 22.2, Voltage, V: 220, Engine soft start: Yes, Maximum rotation speed, rpm : 6500
Speed control: No, Power consumption, kW: 1.8, Maximum disc diameter, mm: 230, Disc seat diameter, mm: 22, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 6000
Speed control: No, Power consumption, kW: 0.7, Maximum disk diameter, mm: 125, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm: 11000, Minimum rotation speed, rpm: 11000
Speed control: No, Power consumption, kW: 0.85, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22.2, Voltage, V: 220, Smooth engine start: No, Maximum rotation speed, rpm : 11000
Speed control: Yes, Power consumption, kW: 1400, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22.2, Voltage, V: 220, Engine soft start: Yes, Maximum rotation speed, rpm : 9000
Speed control: No, Power consumption, kW: 2.1, Maximum disk diameter, mm: 230, Smooth engine start: No, Maximum rotation speed, rpm: 6500, Spindle thread length, mm: 14, Spindle thread diameter, mm: M14
Speed control: No, Motor soft start: No, Switch hold: No, Rotary main handle: No, Overheat protection: No, Overload protection: No
Speed control: No, Power consumption, kW: 1.05, Maximum disc diameter, mm: 125, Disc seat diameter, mm: 22.2, Voltage, V: 230, Engine soft start: No, Maximum rotation speed, rpm : 12000
An angle grinder (angle grinder) or the well-known angle grinder is one of the most demanded power tools in the arsenal of a home and professional craftsman. Thanks to a huge selection of accessories, the angle grinder can perform a wide range of operations: cutting, cleaning, surface grinding.
The tool handles a variety of materials:
- metal;
- concrete;
- ceramic tile;
- artificial and natural stone;
- brick, etc.
How to choose a tool?
The models of angle grinders in the catalog differ in their characteristics and a set of additional functions. When choosing a specific model, pay attention to the following parameters:
- Power. Varies from 500 to 2600 W. Affects the time of continuous operation of the tool, weight, cost and types of operations performed. For simple household use with a margin, 700-1200 watts are enough. Models from 1 kW are used in production and for a large amount of work.
- Ergonomics. Make sure the tool fits well over your hand. Removable accessory handles on select models help adapt the angle grinder to different conditions (right and left handed).
- Smooth start. If equipped, the grinder turns on without jerks, thereby reducing gear wear.
- Adjusting the position of the protective cover. For budget options, the position is adjusted with a key or a screwdriver, for more expensive ones. with a special key. The function is relevant if the operations to be performed change frequently and the cover needs to be constantly moved.
- Anti-vibration protection is required if the tool is actively used for several hours in a row.
- The speed control function helps you to select the desired mode for different materials and equipment.
- Dust protection is a must if you plan to work on concrete.
angle grinder 125 mm with variable speed and smooth start: rating of the best models. Which one to choose?
An angle grinder or simply an “angle grinder” is one of the most demanded and irreplaceable tools in everyday life. It can be used to cut or process surfaces of various materials: brick or ceramic tiles, concrete products, stone and even iron. When starting home repairs, it is advisable to stock up on this tool in advance.
There are more and more manufacturers of such equipment in the world. And each brand strives to make its models as convenient and functional as possible for users. Therefore, it is often very difficult to choose a specific model. Consider the best, according to buyers, 125 angle grinder with adjustable speed and smooth start.
AEG WS 13-125 XE
An excellent tool in a compact size. It is moderately priced and powerful. angle grinder perfectly copes with the tasks set, equally good at sanding surfaces and cutting off materials.
A feature of the model is a simple replacement of equipment (discs, brushes) and adjustment of the casing, without the use of keys and other additional tools. The handle included in the kit is convenient to use, it does not vibrate and is securely fixed on the body.
- Good power (1300 W).
- Low noise level.
- Comfortable to hold in hand.
- Easy to change attachments.
- Fairly heavy (2.4 kg).
- Heats up quickly at low revs.
Metabo WEV 15-125 Quick
Reliable, functional unit. Its price may confuse the buyer a little. However, it is well worth the money spent. The user will never regret the choice made for a long time of operation.
The model is characterized by high performance due to the incredible engine power of 1550 watts. At the same time, the angle grinder fits perfectly in the hand, since it is small in size. It is easy to operate thanks to a comfortable body and an ergonomic detachable two-position handle.
- Safe to use.
- Reliability
- Good build.
- Long network cable (4m).
- High price.
- Flimsy speed control mechanism.
How to work properly?
When working with an angle grinder, it is imperative to observe safety precautions, since this tool is quite traumatic. The basic rules for using the grinder are:
- hold the tool firmly so that it does not fall out of the hands, does not bounce off the material being processed;
- install only those grinding wheels for the diameter of which the angle grinder is designed;
- make sure that the network cable does not fall under the rotating disk;
- stand as steadily on your feet to avoid loss of balance;
- turn on the sander only if the user is completely ready to work;
- replace the attachments only when the angle grinder is turned off and unplugged;
- be sure to turn off the unit after performing this or that work, do not move around the room or room with the tool turned on;
- after turning off the angle grinder, turn on the blocking of accidental pressing of the “start” button, if the model provides such a function.
Hammer USM 1200 E
High-performance angle grinder for discs up to 125 mm diameter. It is distinguished by high productivity, the user can easily perform both cutting and grinding work. Speed control allows you to tune the angle grinder to suit the operator.
A feature of the grinder is the handle, which can be fixed in two positions. left or right, making it more convenient to use. Also, the spindle lock makes the unit more attractive, making it easier to change equipment.
- Sufficient power (1200 W).
- Keeps revs well under load.
- Availability of spare brushes.
- The start button must be pressed throughout the entire operating time.
- Rigid network wire.
Makita 9565CVK
A good angle grinder, reliable and functional. The powerful 1400 watt motor provides the user with incredible productivity, no matter the type of work being done, be it sanding or cutting.
The compact size, coupled with the light weight of the model, makes it easy to operate the tool. The angle grinder provides for automatic shutdown of brushes in case of severe wear, limitation of starting current, blocking of accidental activation.
- Excellent performance.
- Lightweight (1.8kg).
- Multifunctional.
- Convenient spindle stop button.
- The cost.
- Tough power button.