Ariens Blog. Aftermarket lawn mower blades

ariens, blog, aftermarket, lawn

What Lawn Mower Blade Do I Need?

Using the right lawnmower blade is more important than it may seem. The blade of the lawnmower is what, to a huge extent, determines the quality of the cut. The blade has a big say in whether or not you will end up with a clean-cut lawn or not. And this is something that I myself was very interested in. People always talk about what lawnmower blade they use and how they have a few different types of blades. So, what lawn mower blade do you need? The lawn mower blade you need will vary depending on different factors like your lawn mower model, its capabilities, the type of cut you are after, and even the grass conditions and time of the year. The right lawn mower blade needs to fit perfectly on your mower and suite to your needs. As it stands, there is more to these blades than meets the eye. Certain characteristics separate them and make them excel at different aspects of mowing. Let’s take a look.

What Type of a Lawnmower Blade Do You Need?

People have been using lawnmowers for quite some time now, so they definitely had enough time to optimize the whole process of cutting a lawn. Naturally, there are a few different types of lawnmower blades that have been invented and are still in use today. Certain blades will perform better at certain tasks. Depending on your goals and preferences, you may need just one or a few different types of blades. There are several types of lawnmower blades:

Standard (Deck) Blade

This is the most commonly used type of blade. New lawnmowers often come with a deck blade installed on them. However, this does not necessarily mean that this is going to be the best blade for you. The deck blade is best used for regular cutting of well-maintained lawns. The standard blade is straight, and it is not suitable for tall grass, as it does not provide good lifting or mulching capabilities.

Lifting Blades

  • Low lifting blades are great for dusty and sandy terrain because they will cut the grass while keeping the dust and debris from spreading;
  • Medium lifting blades are suitable for relatively well-maintained lawns, and they can cut even slightly damp grass; and
  • High and extremely high blades are ideal for cutting tall and thick grass. They have superior side discharge capabilities but should not be used in dusty and sandy terrain.

In other words, the more exaggerated the curve, the stronger the suction will be resulting in finer cut and cleaner lawn.

However, this comes at a price. The lift creates more strain on the engine; thus, the higher the lift, the more powerful the engine should be.

Notched (Rolled) Blades

These are very similar to the standard lifting blades as they feature curved edges too.

The only difference is that the curve begins with a notch. This creates a stronger airflow, which expels the grass cuttings at a much faster rate.

The notched blades are ideal for bagging and cutting high or moist grass.

Mulching Blades

Mulching blades are easy to spot. They are curved and have a longer cutting edge.

Mulching blades are designed to mulch grass and leaves. However, they are not the best at suction and side discharging the grass.

Toothed (Or Gator) Blades

Gator blades are like upgraded mulching blades. If you want a blade that can be used for mulching, side discharging, and bagging, this is the blade you need.

You cannot really mistake them; they have usually three curved teeth right behind the cutting edges.

These teeth significantly improve the lifting and the discharge power, while at the same time produce very finely-shredded grass cuttings.

What Size of a Lawnmower Blade Do You Need?

You might have noticed that lawnmowers are usually labeled with different sizes. The same holds true when you look at the blades; there can be 21-inch blades or even 42-inch blades.

But then if you take a closer look, you will find something very interesting. A 21-inch blade will not look very different compared to a 42-inch blade (maybe just a few inches larger).

So, how are mower blades categorized by size, and how to find out what blade size you need?

The deck size of your lawnmower determines the size of the blade you need.

This is why a 42-inch blade will not be a lot longer than a 21-inch blade; the 42-inch blade is designed for use in 42-inch lawnmowers, which usually have two blades that overlap. Or in other words, you will not need a really long blade.

How to Find the Size of the Lawnmower Blade You Need?

You need to measure several different aspects of the blade in order to make sure you have everything covered.

  • The length of the blade – The length is measured diagonally from cutting tip to cutting tip;
  • The center hole – You need the diameter of the center hole as well as its type;
  • The outer holes – In a similar fashion; the diameter of the outer holes needs to be measured and then the distance between the centers of the two outer holes;
  • The width of the blade – The width of the blade is measured at its center; and
  • The thickness of the blade – The thickness is measured at the center of the blade as well.

Does the Blade Size Matter?

The size of the blade a lawnmower uses is one of the essential aspects when buying a new blade.

The blade size determines the size of the cut, and it needs to match your mower’s deck size.

There is another aspect of the blade’s size. And that is mowing time.

The bigger the area you need to cut, the bigger the lawnmower you will generally need. And a bigger lawnmower (with a bigger blade) can reduce the mowing time significantly.

Can You Use a Bigger Blade?

Lawnmower decks are designed to accommodate blades with a specific length.

In most cases, the blade stands at about 1/2 of an inch away from the deck. This does not give you a lot of leeway.

Lawnmowers should not be run with a longer blade than what is recommended by the manufacturer.

A longer blade will usually not fit. But even if it fits, there is a higher chance of damaging the blade, the deck, and the engine.

Also, it is a severe health hazard; do not do it.

Can You Use a Smaller Blade?

You may ask me, “Okay, if I cannot fit in a bigger blade, what about a smaller blade?”

In practice – this is true – a smaller blade can be installed on any lawnmower (provided the mounting fits). But are there going to be any consequences of doing so?

Using a smaller lawnmower blade is not recommended, because this can damage the lawnmower, the blade, and the person operating the mower.

Lawnmowers are usually fine-tuned to work with blades of a specific size.

A smaller blade can potentially lead to some problems; the blade may spin at faster RPMs, the engine may end up maintaining higher output or torque, and there could be unsafe levels of vibrations.

A smaller blade is going to be, again, a health hazard.

Can You Use Lawnmower Blades From Different Manufacturers?

Many of the lawnmower blades are interchangeable. With time mower blades across the board have been very standardized.

To use a different blade, either a replacement or a borrowed one from a different mower, you need to make sure that everything fits perfectly; the center hole, the length of the blade, the outer hole’s size and spacing, the width and thickness.

As long as everything matches, the blades should be good to go.

If something does not match, it is not recommended to swap the blades.

Is There a Difference Between the Aftermarket and Original Blades?

Sooner or later, every owner of a mower is faced with the dilemma of choosing between original (OEM) blades and aftermarket replacement blades.

Original mower blades are usually designed explicitly with the idea to fit on certain lawnmowers. They are like a puzzle piece that fits perfectly. And the original blades will be the same as the ones your lawnmower initially came with.

Original blades are also held to higher standards of quality. Usually, going with an original part is better than buying a replacement part from some obscure company.

Aftermarket blades are not necessarily worse compared to an OEM product.

It is a well-known fact that some aftermarket blades are manufactured by the same companies that make the original blades – the only thing that may be missing sometimes is the branding.

And secondly, as a direct result of that, the aftermarket blades are almost universally going to be significantly cheaper compared to their original counterparts.

On the other hand, some aftermarket blades may be held to lower quality standards.

In other words, the blades that did not pass the quality check for a certain brand may be sold as aftermarket blades. And some may not even fit your mower due to poor design.

Before installing an aftermarket blade on your mower, make sure that your mower’s warranty will not be voided.

Some manufacturers will not honor the warranty if the mower has been altered in any way, including installing an aftermarket blade.

As it stands, you do not necessarily need to buy original lawnmower blades. Buying aftermarket blades is okay as long as the necessary due diligence is carried out in advance.

Hi! I’m Peter, the owner of BackyardGadget. Working around the house has always been a big part of my life. I’ve created this site to share my experience, and to help people choose the right tools for the job. Thank you for stopping by!

Recent Posts

Have you ever pulled on the starter cord to get your mower started, but the rope snaps? Or perhaps it pulls all the way out and doesn’t rewind by itself. Either way, it’s clear the pull cord is.

One of the most common features of most gas-powered push mowers is the cord or rope that you use to get it started. But why do they have pull cords rather than some other starting mechanism? The.

About Us

Hi! I’m Peter, the owner of BackyardGadget. Working around the house has always been a big part of my life. I’ve created this site to share my experience, and to help people choose the right tools for the job. Thank you for stopping by!

Legal information

BackyardGadget.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. BackyardGadget.com also participates in affiliate programs with Clickbank, Commission Junction, and other sites. BackyardGadget.com is compensated for referring traffic and business to these companies.

The Best Mower Blades For Your Lawn Mower

Mower blades to a new lawn mower are like tires to a new motorcycle. Every new bike comes with​​ tires and every new lawn mower comes​​ with blades, and a new owner of either may consider changing the set equipped with their new product. However, whereas the typical new motorcycle owner is expecting cheap tires with a low wear rating, the case isn’t the same with lawn mower blades. Stock lawn mower blades have no less or no greater quality than any other aftermarket or OEM blade, and actually, it’s wisest for a homeowner to use the factory blades that came with their new mower.

Mower Deck Aerodynamics

Every component on an Ariens lawn mower or snow blower is engineered with a specific purpose and designed exactly for that application. After sitting down with AriensCo engineer Paul Ferrier, we learned that mower blades are no different.

Mower blades are custom components; they are not one size fits all. Mower blade design is specific to the mower it’s used with. From the stamped deck on an Ariens ZOOM 34 zero turn to a 10-gauge, 60 inch welded deck on an Ariens APEX lawn mower, there’s a specially engineered blade for that particular mower deck. Mower decks aren’t designed to simply mount blades and shield discharge, they’re designed to lift grass, cut it and discharge it as efficiently and as effectively as physically possible.

The Best Lawn Mower Blades

Every Ariens mower deck rolling off the assembly line today is engineered, tested and validated for cut quality performance. To the unknowing eye, a mower deck is just a steel shell with blades and baffles, but it’s actually a very delicate system of physics and aerodynamics. Mower decks are uniquely designed for their depth, width, power supply and expected application, and its blades are designed especially for the deck.

“Mower blade geometry and the cutting chambers of a mower deck work in tandem,” said Ferrier. “Their designs rely on each other. For that reason, the best blade anyone can use is an OEM (original equipment manufacturer) blade, because that blade was specifically designed to work with your mower and give your cutting deck its best performance.”

Different Types of Mower Blades

While an OEM blade is the best choice for your lawn, you have a choice in the style of the blade for your desired application. Ariens designs different types of blades to work for both normal and special conditions. For example,​​ manufacturers make blades that lift grass, blades that are more durable in abrasive soils, blades that are advertised to enhance fuel efficiency and blades that mince grass into tiny pieces.

Though Ariens hasn’t designed a blade for all of these applications, we design blades for the conditions that will likely be seen in the yards of our customers. That’s why you’ll often find a large blade selection at your local Ariens dealer,​ Your dealer can help you find exactly what you need, but if you prefer self service, remember these two points:

  • Purchase replacement mower blades that are the exact size as the origina​ls.
  • Ensure the blades you buy are the right type for your application.

​Read through the different types of blades below to learn which you may ​​want and th​​ose which we wouldn’t recommend for a manicured yard.

What are flat / no-lift blad​​es?

This usually won’t be the type of mower blade used for manicured lawns with an even cut and pristine edging along the sidewalk. Flat blades d​​on’t have the air lifts on the ends. They’re exactly as their name suggests – flat, meaning they don’t generate air circulation under the deck.

Though the right-sized flat blade can be installed to a mower deck it was spec’d for, this will likely not be the type of blade installed on an Ariens zero turn mower.

“Flat blades are mostly used for knocking down overgrowth like in ditches, for example,” said Ferrier. “They don’t leave a polished result and they won’t work the best in bagging applications, either.”

What are lift bl​​ades?

Lift blades are the style of blades that come with a mower fresh off the Ariens assembly line and are commonly used in a homeowner’s applications because they provide the best cut quality.

Lift blades utilize an “air-lift” or a flared bend at each end of the cutting blade to generate ​​a deck’s aerodynamics and the vacuum that helps pull grass upward to g​​ive it a uniform, even cut across the width of the deck. Just remember, the deck will​ need to be pitched correctly​ and other conditions will have to be satisfied​ to take advantage of a deck’s aero package and to achieve the quality of cut boasted by lift blades.

Lift blades are best for bagging. The design of high lift blades, in conjunction with the mower dec​k engineering, influence the aerodynamics that allows grass to circulate around the mower deck and discharge evenly. This is important while bagging because the clippings need to be discharged at a height which can enter the bagger system most effectively.

What are mulching b​​lades

Mulching is an easy, economical and sustainable method for thickening lawn density. Mulch kits​​ use a mower deck baffle system that blocks the discharge opening of a mower deck and specially designed mulching blades to cut and recut grass clippings into smaller, decomposable grass clipping particles. These particles, which are not discharged or bagged, fall to the lawn bed where they decompose and feed a lawn so it grows thick and green.

Mulch blades, which feature air lifts that generate air circulation throughout a mower deck, have special geometry and more cutting edges along the length of the blade to mince grass into those tiny clippings.

Mulch kits have useful application in any lawn and can be installed to any Ariens zero turn m​​ower.Click here​ to learn all about mulching and its benefits in a blog post we produced earlier this year.

What’s a serr​​ated blade?

Some people swear by them, and others don’t. The average homeowner may not get as much from a serrated blade, but they could make a difference for those who live on a large amount of mowable a​creage.

Serrated blades can be lift blades and mulch blades, but their unique feature is in the serrations in the lift area of the blade which is designed to reduce the blade’s surface area. The intention behind a blade with less surface area is that there’s less air resistance and drag on the blades, meaning they’ll cut through air more easily. Theoretically, that requires less effort from the mower, which increases its efficiency. However, validating a serrated blade’s effectiveness may require measuring the fuel consumption against a control variable over time in larger mowing areas.

Ariens doesn’t manufacture serrated style blades for a couple reasons. First, they don’t give much back to a homeowner who maintains a small area of turf. Additionally, as serrated blades wear, their serrations have the potential to become brittle, break off and turn into projectiles. In the chance for that scenario, we suggest staying away from serrated blades.

LaserEdge ​​blades

LaserEdge blades are especially useful for commercial lawn maintenance applications, but homeowners who live in Florida, South Georgia and other are​​as with sandy soil or otherwise abrasive soil conditions could still have use for LaserEdge blades.

When mowing in abrasive soils, the air circulation under a cutting deck can kick up enough sand and grit to turn the cutting chamber into a sandblaster, causing the mower blade material to wear much faster than in normal conditions. In fact, commercial landscapers in Florida sharpen or replace their blades at least once per week because of their soil composition.

LaserEdge blades feature a strengthened layer of material below their cutting edges. As the top layer of the cutting edge wears away from the abrasion, the longer-lasting, reinforced bottom creates a new cutting edge and extends the blade utility. Even though residential users are cutting nowhere near the maximum hours of a commercial lawn mower, LaserEdge blades can provide the same savings. Extended blade utility means the same quality of cut with less sharpening and less replacements, making LaserEdge blades the mower blade with the best value.

While LaserEdge blades were designed mainly for commercial lawn mowers, their application is still useful for homeowners. However, be aware that since these blades were designed for commercial use, their fit is more limited to a prosumer lawn mower, which is a residential zero turn with commercial features. In the Ariens lineup, that would be the Ariens APEX.​

How to sharpen mow​​er blades

Mower blades are like the knives in a kitchen. After too much use, they become dull, work less effectively and damage your grass. Dull mower​​ blades tear grass blades instead of cutting them cleanly, causing grass to become stressed. That stress can do a lot of damage to your lawn, causing it to look unsightly and worse – requiring you to spend time and money fixing the damage.

Frayed grass blade ends allow moisture to evaporate from a lawn more easily, requiring more irrigation and more money spent keeping it green. But no matter how much water you dump on your grass, fraying causes grass blades to become so stressed and damaged that their ends will turn brown anyway. A little brown spot on just one blade is no big deal, but when your entire lawn is littered with frayed grass blade ends, it leaves a tan hue across your entire lawn. Take a picture of a healthy, green lawn and put it next to one with damaged ends and you’ll notice the difference.

Torn grass is also more susceptible to turf disease because its frayed openings leave more entry points for harmful pathogens, such as a variety of fungi. Though lawn diseases can be treated and cured, it’s just another annoyance that can cost time and money. Help avoid those issues by sharpening your blades.

Mower blade sharpening isn’t difficult, but it requires experience and the right tools. Clamps, a metal grinder and the right safety gear is all that’s ne​​eded to sharpen a blade, but we don’t recommend attempting it without lessons. If you’re a first timer, take your blades to your local Ariens dealer​ and have them do it for you.

Balancing mower bl​​ades

Experience is recommended for sharpening blades not only for safety ​​reasons, but because blades are sensitive pieces of engineering. Like the wheels on a car, blades need to be balanced. Without blade balance, a mower deck will experience excessive vibration and you’ll be left with an uneven and very unattractive cut quality.

ariens, blog, aftermarket, lawn

Think of a blade as an object with two weighted ends, each end being the other’s counterweight. As blade material is removed during sharpe​​ning, the blade’s weight changes on one side, meaning the other side will need to be filed equally to maintain balance.

How to balance a m​​ower blade

To check blade balance, insert an unthreaded bolt or a screwdriver through the blade’s mounting hole and place the screwdriver horizontally. Place the blade horizontally and observe the blade movement. If one end of the blade moves down and makes the blade vertical, file away more material from that end of the blade and test again. File as needed until the blade remains balanced on the screwdriver.

As always, refer to your operator’s manual to review instructional details when sharpening and or balancing your mower blades.

If your blades are beyond sharpening, find replacements at your local Ariens dealer. Or, if you know the replacement blade numbers for your mower, you ​can purchase them online at parts.ariens.com.

Best Commercial Lawn Mower Blades

There are only two things that can be used to characterize a good lawn mower, and these are its cutting ability and its motor power. The blade of a lawn mower ultimately determines the quality of cut you will have. Without a quality blade, it doesn’t really matter the design of the deck.

One of the most important parts of a commercial mower blade is its sharpness. The goal is to find the most durable blade that remains sharp for the longest period of time… even in rough conditions.

We tested tons of different blades to make this list. We have narrowed it down to the top 5 commercial mower blades.

The links in this article may be affiliate links. This means if you click and buy through these links we may earn a small commission at no additional cost to you. It is our way of “keeping the lights on.” Thank you for your support.

over, picking such a blade depends on three factors:

One of the first things to check is the length of your blade. Keep in mind that there is no strict procedure to follow, so longer blades do not guarantee anything. The blade has to fit within your lawnmower’s model. The majority of blades fall within the sizes of 16.75 inches and 22 inches long. Some mowers can even facilitate blades between 21 or 22 inches also. You can make your selection based on the model.

The type of material the blade is made of is a decision that can be made independently of the mower’s style. Lower metal will help you minimize prices, but not turf. Please bear in mind that your lawn mower blade is something of a maintenance investment and will affect the mower’s life. Strong stainless steel is mostly the safest choice. Often, look at the powder coat (or other protection coat) done on the blade, so it doesn’t end up rusting.

The final thing you should put into consideration is the size of the deck for the blade. Almost all push mowers have a deck size within the range of 16 – 30 inches. While riding mowers have larger deck sizes as well.

Aside from these factors, there are a whole lot of other factors for consideration. However, these are the most important things to consider before making up your mind to purchase a lawnmower blade:

Review of the Best Commercial Lawn Mower Blades

Below you will find some of the best commercial mower blades on the market. We have tested each of these in many different environments and they all have their pros/cons. At the end of the day, any of the blades below will do a great job.

Ballard Razor and Ripper Blades

Ballard Inc has introduced commercial mower blades recently and they seem to be great. There are two different types, the Ripper and Razor blades. These come in many different sizes for almost every commercial brand. There is also a matching X-blade kit for all of their blades.

The best way to use these blades is by installing an X-blade kit with ripper blades (mulching) on top and Razor blades (standard) on the bottom. This provides an incredible cut.

This setup even works great with a chute blocker. It is the ideal way to cut in nearly any mowing environment.

This is among the most common mulching mower blades on the market. These lawn mower blades are made with natural and authentic material to make them usable for a long time. So you’re not going to have any trouble using your lawn mower with this robust blade.

These blades provide an incredible mulching ability, with a circular center hole for mounting, and is constructed with a solid steel design. It would also ensure that the blades last a long time and give you high-quality performance at all times on your lawn. It makes cutting easier without the specific need to sharpen the blade before using it.

The Oregon Gator blades are trusted by many commercial lawn care companies. They are proven to last a long time and give a great cut quality.

Oregon also has high-lift blades that are great for side discharge and bagging. These blades do a great job of lifting grass and dispersing it evenly.

Rotary Copperhead Blades

Rotary is a lawn mower parts distributor and carries many different types/brands of commercial mower blades. While searching for the best commercial lawn mower blade with the best high lift blades, this product definitely stood out. They also have some great mulching blades available.

Rotary is a great place to get blades for most commercial users because they have universal blades and manufacture blades. You will be able to find out about any blades you need from them. The only problem is they don’t sell online at this time so you will have to buy through your local dealer.

The Copperhead mower blades are Rotary’s own branding and logo that they use for most of their blades. These are manufactured by Rotary and sold through their dealer base.

By offering outstanding efficiency, improved alignment, and a high degree of durability for day-to-day mowing, this may be the best potential choice for any user of this particular mower model. It provides a wide cutting area with a sharp blade that increases your mowing speed and performance.

The commercial blades made by Rotary are definitely premium blade that is trusted by many in the industry. They are a household name that has been around a long time.

USA Mower Blades

The USA mower blades are pre-sharpened and provide a quick, smooth cut that requires no sharpening before usage. It helps you get back to mowing the lawn as easily and safely as possible to maximize grass trimming efficiency.

In contrast, the high lift blade configuration makes it possible to recycle grass seed for fast drainage into a lawnmower carry bag. These lawnmower blades have a strong transmission capacity that lets the lawn tractor span a wide grass area at a high rate and efficiency level.

The USA Mower blade has an extremely high average cutting area, a great choice for larger lawn tractors, helping you to cut wide grass fields easily at high speeds. Yet you can still get a high degree of versatility, allowing lawnmower blades a great choice for many users. The blade has a high cutting power and wide area; therefore, it would provide quick, high-speed cutting for bigger lawns.

Manufacture Blades

Most commercial mower manufacturers make their own blades. These are good replacements because they fit your mower perfectly. They match the recommended specs and usually have a little better warranty than aftermarket blades.

These lawn mower blades can vary greatly in size and specs. Almost all manufacturers will use some type of steel. Who has the best is a very difficult question.

If you are going to use a bagger or mulch kit that is many by the people who made your mower it may be a good idea to keep the factory blades. Not always, but most of the team this will do just as good, if not better than aftermarket blades.

Warranty may be another reason to keep the factory blades. Primarily if you use something like X-blade… this will most likely void your mower’s warranty if you still have one.

Best Commercial Mower Blades

Top Pick

Our top pick for the best commercial mower blades at the best price is the new blades offered by Ballard Equipment. There Razor and Ripper blades come at a great price for very high-quality blades.

Be sure to use our code “CMR10″ for 10% off your entire order at Ballard Inc.

Premium Choice

Our premium choice is the Oregon G6 gator blades. These blades come at a pretty high price but they are incredibly durable and offer a great cut. They have been used and trusted in the industry for a long time.

Value Choice

If you are on a budget, then we recommend the USA Mower blades. However, you don’t have to worry about sacrificing quality for the price, because most users are pleased with their purchase.

X-Blade Adapters

What’s better than one blade? Two blades! The X-Blade adapter allows you to put two blades on each spindle. The adapter is key to doing this so you don’t over-torque the blade… which can cause the blades to become stuck.

Many people are skeptical of this setup but it works really great. The only thing you really need to do is make sure you engage/disengage the PTO at lower RPMs to ensure you don’t put extra stress on your clutch.

Use code CMR10 at Ballard Inc. for 10% off your entire order

Blade Assist

A blade assist is a nifty tool that helps sharpen your blades. It will ensure you get the perfect edge every time. If you are a lawn care professional and use a bench grinder this is a must-have.

Use code CMR10 at Ballard Inc. for 10% off your entire order

Blade Sharpening Tools

The best blade sharpening tool in my opinion is the bench grinder. DeWALT makes a great one of this. Their 8-inch grinder is perfect for sharpening blades quickly and efficiently. It is much easier to get a consistent edge and balanced blade with a bench grinder over a hand grinder.

FAQ

How often to sharpen commercial mower blades?

In most cases, you should sharpen your about every 20-25 hours. This usually comes out to about once per week for most full-time crews. If you aren’t full-time, it is best to just sharpen blades based on the hour meter.

This will sometimes vary depending on which type of terrain you are mowing. For example, if you are mowing sandy areas your blades will probably need to be sharpened a bit sooner.

It usually isn’t too hard to know when your blades need to be sharpened. If you begin to notice some uncut grass, it is probably time to sharpen your blades.

How often to replace mower blades on a commercial mower?

This will greatly vary based on terrain and application. There are too many variables to give an exact time frame. It is however very important to inspect your blades frequently. You should check for dents, worn areas, bent, or other damaged areas on your blades.

If any of these are present, it is a good idea to change your blades. If you hit a lot of rocks or other debris is it likely for some of these to be present. It is important to use good judgment and change your blades when you’re worn out. If you aren’t sure, you can always go to your local mower dealer and get their opinion.

How to sharpen commercial mower blades?

The best way to sharpen commercial mower blades is by removing them and sharpening them with a bench grinder, like the one shown above. This will give the most precise sharpening and accurate edge each time. It is very important to have balanced blades when you sharpen them.

If you want to go another route, you can check out our article on sharpening blades without removing them.

Where to buy commercial mower blades online?

The best place to buy blades online is either Ballard or Amazon. They will both have the best pricing and quality of blades. You will have to do some searching on Amazon for your blades. This is one of the things that makes Ballard equipment stand out. They make it easy to find the blades specific to your mower.

Wrapping it up

There you have it, the best commercial mower blades in 2021. A lot of times, for larger companies, it will come down to price and longevity. We have taken these into account and given our best recommendations based on that.

What do you think?

Do you use any of the blades above? Let us know in the Комментарии и мнения владельцев below which you’ve used and which is your favorite.

If you’re interested in staying up-to-date on reviews of the latest mowers sign up for our newsletter below!

Subscribe To Our Newsletter

Join over 1200 others on our mailing list and receive the latest news on commercial/residential lawnmowers, handheld equipment, and the lawn care industry. You will also receive a link to our most popular mower resources toolkit!

Replacement Mower Blades

Fisher Barton Blades manufactures lawn mower blades for leading lawn mower OEMs. These lawn mower manufacturers sell our blades to the general public through their distributors and other channels.

Fisher Barton Blades only provides replacement blades to Original Equipment Manufacturers to sell through their sales channels. Fisher Barton does not sell directly to consumers through the aftermarket.

Should you need a replacement mower blade, please see the links below for a list of mower manufacturers. If you see your lawn mower manufacturer listed below, click the corresponding link to be taken to either their online store or to locate your nearest dealer. From there, you can contact your nearest dealer for information on purchasing your replacement lawn mower blade.

ariens, blog, aftermarket, lawn

Connect With An Expert

We’re here to help and would love the opportunity to discuss your technical questions or application challenges.

Tell Us About Your Project

Do you have a specific project you’re ready to discuss? Use our quote request form to start the process.

Connect With An Expert

We’re here to help and would love the opportunity to discuss your technical questions or application challenges.

What is the Best Zero Turn Mower Blade? (2023) — Reviews of Mulching Blades

If you buy something through our posts, we may get a small commission. Read more here.

ariens, blog, aftermarket, lawn

Changing the blades on an Ariens Zero turn mower

The problem with shopping for mower blades is that so much can go wrong. You could overpay for a set that doesn’t fit your mower or even get blades that aren’t durable at all. Our professional team conducted a review of the best zero turn mower blades to help you make the best possible choice.

The A156 mower blades can withstand up to five sharpening sessions before replacement, thanks to their.203” thickness. The blades can fit a handful of zero turn mowers and deliver excellent quality.

Maxpower’s mower blades have a blend of durability and efficiency, due to the heat-treatment manufacturing process. The blades will replace original models perfectly, as they have the same 6-point star center.

The Bad Boy 54” Deck Blades are great for many zero turn mowers including the ZT and Outlaw models. You can expect an excellent performance that rivals the original set from these blades.

The A156 mower blades can withstand up to five sharpening sessions before replacement, thanks to their.203” thickness. The blades can fit a handful of zero turn mowers and deliver excellent quality.

Maxpower’s mower blades have a blend of durability and efficiency, due to the heat-treatment manufacturing process. The blades will replace original models perfectly, as they have the same 6-point star center.

The Bad Boy 54” Deck Blades are great for many zero turn mowers including the ZT and Outlaw models. You can expect an excellent performance that rivals the original set from these blades.

Reviews of the Best Zero Turn Mower Blades

A156 (3) Hustler 48” Fastrak Blades Gator Style Zero Turn Mower

These zero turn mower blades are sold as ‘heavy duty’ replacements, which describes them quite accurately. Unlike many products, the A156 Hustler Fastrak Blades are tough, durable, and can be sharpened up to 5 times before they need replacements.

Our professional team loves that they can fit many different models of zero turn mowers, including Bunton-Goodall Encore, Great Dane, John Deere Lawnboy, and Lesco-Scag Snapper. However, they aren’t limited to these models because as long as the specifications match your mower’s, the blades will fit. The A156 blades are 16 ½ inches long and 2 ½ inches wide.

Maxpower 561545B 3-Blade Set for 5 Inch Cut MTD/Cub Cadet/Troy-Bilt Replacements

The Maxpower 561545B 3-Blade Set replaces the original on a ton of zero turn mowers, including Troy-Bilt and Cub Cadet. In addition, they are designed to fit MTD 6 point stars, which is a very common screw style. The blades are highly durable due to their heat-treatment manufacturing process. As a result, they can last as long – or even longer – than the original mower blades.

One thing our team of experts loves about these blades is that they are made in the USA. These mower blades are easy to sharpen, too. This gives them a premium quality and quick delivery times that aren’t always present on other brands. It’s also quite affordable.

Ariens RAZOR Walk-Behind Mower Beyond The Specs