Bosch Psb 600 Re Drill Not Turning On
Impact drill / driver (Ukraine, Simferopol)
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: the model belongs to the category of light multifunctional household tools.
Drill capabilities are standard for this class. drilling holes in metal structures, and in rotation mode with axial impact. drilling of other building materials (concrete, brick, stone). The reverse is useful when screwing. appropriate nozzles are inserted directly into the cartridge.
Achieving such versatility is impossible without speed control. it is carried out by pulling the trigger. In addition, the drilling depth can also be dosed. the corresponding emphasis is delivered in a set.
ADJUSTMENTS: There is no usual speed limit wheel. they are adjusted only by pulling the trigger. Just above him, as usual. “Flag” responsible for the direction of rotation.
Mode switch. pass-through (like the reverse button on cordless screwdrivers) and is located at the top of the gearbox.
SUMMARY: easy household tool. It is executed according to the minimal scheme, but has many abilities. has shock mode, reverse, convenient to work with screws and screws.
Drill-screwdriver (Russia, Bykovo)
TOOL TYPE: household.
WORK MODE: drilling.
CONSUMER ANALYSIS
DESIGN: D-580 ER. another novelty of the joint cooperation of the Bykovsky power tool factory and the well-known Bulgarian company Sparky. The tool is compact, low power and designed for precision drilling of metals and wood.
Bulgarian "patrimony". engine. Given the vast experience of the manufacturer in this area, you can not worry about the motor. But this is not the only import component, another one. the Dutch electronic control unit Capax, which has already become a tradition for drills and other Interskol tools. It performs the same functions as a regular domestic tool, but has an incomparably better design and, according to the manufacturer, a worthy resource.
The undoubted advantage of the device. the optimal combination of price and quality, which is important for the mass consumer.
ADJUSTMENTS: the speed of rotation is regulated by the force of pressure on the switch and by turning the wheel on it. Switch the direction of rotation "flag" above the trigger.
Clamp on position. left on the handle.
SUMMARY: compact tool for drilling metal and wood. The perfect combination of price and quality is ensured by the “alloy” of domestic and imported components.
Greapo PDI thirteen TO/ thirteen Kc/ thirteen Kch
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: PDI 13 K, 13 KC and 13 KCH are not new to the Ukrainian market. Although their power is relatively low, shock mode is present. Drills are successfully used in hard to reach places. compact dimensions allow this to happen.
There is a special “hook” on the case. For it, the tool can be hung on the waist belt. It is convenient when working at height.
Three models are completely identical, but they have different equipment. The letters "KS" mean the presence of a plastic case with a "collection" of nozzles, and PDI 13 KCH in addition to this is accompanied by a set of hand tools. So if you decide to upgrade your toolkit, start with a drill.
ADJUSTMENTS: The operating mode slide switch is located on the upper side of the housing, above the gearbox. Turnovers are regulated as standard. using the trigger and the wheel built into it. There is also a reverse lever.
SUMMARY: inexpensive universal drills for home use.
Kraton PD-600-13 / PD-600-13-K
TOOL TYPE: domestic.
OPERATING MODES: drilling and drilling with impact.
CONSUMER ANALYSIS
DESIGN: Drills of the Khabarovsk company "Kraton" are focused on the most massive category of consumers and are intended for short-term work. Accordingly, there is no need for “constant” electronics and other technological features that increase the resource.
Drills are made according to the classical scheme and all that is needed to solve typical tasks is present: an additional handle with a depth gauge for drilling, shock mode. A standard electronic control unit with reverse and speed control will allow, if necessary, use the models as screwdrivers.
For greater comfort, there is a rubber pad on the back of the handle, and on the body. clip. The model with the index "K" is delivered in a case with a set of drills for concrete, metal and wood.
ADJUSTMENTS: rotation is controlled as usual. adjusting wheel, trigger pressure and direction switching flag. Shock mode is activated by a slider located on the gearbox from above.
SUMMARY: Drills without "bells and whistles", but have everything you need for household work.
Black&Decker KR60Lk/ KR70Lk/ KR70Lsr
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: KR60LK. the simplest option, but quite sufficient for "amateur" work. The drill is well balanced, can twist screws (there is a reverse), drill a brick or concrete (in the presence of shock mode). The chuck is quick-clamping, so changing drills and bits is easy. In addition to visible and tangible virtues, there are also "hidden" ones. We are talking about improvements that serve to increase the resource, for example, the use of ball bearings. From the original "lotion". LED indicator of horizontal and vertical. It is located on the back of the case, so when working, always in sight.
KR70LK is more powerful than the 60th model. Its gearbox is clad in metal. reliability is increased, and the rear handle is covered with rubber. In addition, this drill (as in the other two) has a compartment for storing "all sorts of things." bits, drills, etc.
The last three letters in the marking KR70LSR indicate its zest. removable laser level. It is installed in the right place. in the prepared hole (spreading the legs of fastening inside) or sticking a needle into wood or other porous material. Battery type "Krona", two mounting platforms. everything you need is included. During operation, the laser projects a clear line onto the surface. To simplify orientation, two bubble levels are built into the “tidy”. In the idle position, he “hides” in front of the D-shaped handle. The latter may act as an additional holder. However, a side handle is also included, and next to the cartridge (left and right) there are two threaded holes for connecting it.
ADJUSTMENTS: all KR series models have the same operating principle. Drilling with a stroke is activated by a slider mechanism on the upper surface of the gearbox. Revolutions set by pulling the trigger. By the way, it is rubberized, which increases convenience.
The buttons for locking the on state and changing the direction of rotation are located near the trigger. it’s easy to reach them.
SUMMARY: convenient household tools with a large resource and indicators of horizontal and vertical.
Diffusion Tool MESU-2
Impact drill / driver (Russia, Smolensk)
TOOL TYPE: household.
OPERATING MODES: drilling and drilling with impact.
CONSUMER ANALYSIS
DESIGN: This compact and lightweight drill with a traditional design. "Heiress" MESU-1. It is more powerful and a little lighter than its predecessor.
There is a convenient additional handle that can be locked in any angular position. As usual, the clamp is tightened by turning the knobs around its axis. The main handle is complemented by a soft rubber pad, which contributes to the grip reliability and vibration reduction.
The body material is strong and durable. Gearboxes with helical gears, powerful spring for a strong blow, massive spindle, switch with margin for starting currents, optimally selected ratio of winding data for heating (number of turns and wire diameter on the rotor and stator). Here is a set of technical solutions that provide reliability and endurance.
ADJUSTMENTS: revolutions change the wheel on the trigger. It sets the depth of the "immersion" of the start button, and to the set limit can be selected smoothly, varying the degree of depression.
Video: Bosch Psb 600 Re Drill Not Turning On
Slider mode switch (drilling or drilling with impact) is located on top of the gearbox. Lever reverse. above the trigger and is easily moved with the index finger.
SUMMARY: compact, lightweight and inexpensive car with a traditional design.
Omax 04212/04276/04402/04208
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: presented lineup. ordinary drills of light and medium power categories, with their functionality not distinguished from a number of analogues. Is that the first two cartridge is not installed key, and keyless. this is much more convenient when you often change equipment. All basic functions are provided. shock mode, reverse, speed control. In everyday life, a drill usually serves for occasional drilling of small holes, and Omaks can handle this without much difficulty.
Models differ in both technical characteristics and shape. 04208th has the most modern and ergonomic streamlined design, and only it has a soft non-slip pad on the handle.
Particular attention should be paid to the very wide scope of delivery compared to other ones. At 04276th in a plastic case. a collection of 40 items, most of which are drills (for wood, metal, pen and carbide tipped). And the 04212th is accompanied by a whole set of tools "Home Master". there is a hammer, and roulette, and combination pliers, and many more useful things. In some cases, it is much more profitable than buying them individually.
ADJUSTMENTS: all four drills have a standard electronic control unit mounted in the handle. Appearance 04208th left its mark on the rotation direction control flag. he looks somewhat unusual.
Impact mode is activated by the slider at the top of the gear section.
SUMMARY: Drills for home craftsmen, attractive primarily for their rich "dowry" and affordable price.
Elmos ESR-653
TOOL TYPE: professional.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: The drill is built according to the standard scheme. the speed of rotation is regulated by pressing and the wheel on the trigger. There is a switch of direction of rotation, however, the task of reverse. make it easier to remove the stuck drill, but do not unscrew the screws.
The ESR-653 model replaced the ESR-613, with the main changes being “hidden” inside. Among them are: reinforcing the gear section, replacing the plain bearings "holding" the spindle and anchor with rolling bearings, installing metal brush holders instead of plastic ones. The mass increased slightly, but power also increased with it.
ADJUSTMENTS: the maximum rotation speed is set, as usual, with the wheel on the trigger. The force of pressure on it also matters, which is convenient for drilling. Over the trigger. direction switch. Button to fix the position in place. left on the handle.
Shock mode include a slider. the one on top of the case.
SUMMARY: The drill is built according to a simple scheme. Compared with its predecessor, it has increased resource and power. It has a reverse, although it is not intended for screwdriving.
Impact drill / driver with dust extraction system (Switzerland)
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: You can hardly think of a convenient way to connect a vacuum cleaner to a drill. Bosch designers went the other way. they turned the tool itself into a vacuum cleaner. The PSB 850-2 RE draws air through a special telescopic dust collector to cool the gearbox. It is equipped with a millimeter scale and is at the same time a convenient depth gauge. In an old apartment, this will be very handy, especially when drilling the ceiling: garbage does not fly in the face.
According to the type, the device has versatility: the dust collector is removed (and put on) in one motion. Without it, the PSB 850-2 RE turns into a conventional impact drill: there is an additional handle with a depth limiter. There is also a reverse. to unscrew the screws.
But, despite the “home” orientation, the “constant” electronics controls the rotation frequency, and the collector brushes of the engine rotate depending on the direction of rotation (this extends their service life).
ADJUSTMENTS: as is “accepted” for devices with complex electronics, the speed controller is located on top of the case. Otherwise, everything is standard: a through switch. above the trigger; the operating mode is selected with the slider on the upper side of the gearbox.
SUMMARY: one of the most "clean" impact drills to date. Due to its versatility it will be a useful acquisition for the home.
Packard Spence PSID thirteen MC3
Impact drill with dust extraction system
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: main distinguishing feature. certainly a dust extraction system. It is designed differently than Bosch. spindle nozzle. and looks more bulky. However, most likely it wins in power, as it is a full-fledged “vacuum cleaner”. A telescopic spring mechanism with dimensional divisions and a clamp presses the pipe against the workpiece surface, replacing the usual limiter for the drilling depth, which is now deprived of the additional handle. Under the nozzle is a bag for collecting sawdust. It can be emptied without removing. there is a fastener on the side. "lightning".
Undoubtedly, the PSID 13 MC3 will be in place when working in residential or work premises, where you do not want to litter. However, acquiring a tool exclusively for such cases would be unwise. In addition, the complexity and lengthening of the transmission mechanism affects the resource of the structure as a whole and its power characteristics. And, in order not to make the consumer a hostage to an intricate idea, the vacuum device is removable: it is screwed up, leaving room for a standard key cartridge. Then the tool turns into a conventional impact drill. In this case, there is a second side handle with a clip for the stopper and an additional cartridge. By the way, the kit also includes a set of bits and drills.
ADJUSTMENTS: standard electronic unit with a speed limiter, adjustment by pulling the trigger, a flag for selecting the direction of rotation and a latch on. Slider for changing the operating mode. on top of the gearbox.
SUMMARY: A model that is convenient for working in rooms where you do not want to (or cannot) litter. Without a dust extraction system, it is a conventional impact drill.
Skil 6385/6390/6770/6775
Impact Drills / Screwdrivers (Hungary. Netherlands)
TOOL TYPE: domestic.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: models have the same stylish design, the main handle is ergonomically shaped. Everyone except Skil 6390. has a one-foot chuck, which is very convenient for frequent changes of bits and drills. But this operation will not require the intervention of an additional tool in the 6390th model. The “lamp” of illumination of the working area, which is automatically activated by the sensor, mounted in the lower part of the handle, distinguishes it from the others. A trifle, but can be useful in hard-to-reach places.
The 6770th and 6775th drills are a bit heavier and “stronger”, but less revolving. As a result, the torque is higher and, accordingly, the maximum drilling diameter is larger. The increase in power affected the appearance. for convenience, on the back there is a rubber pad and a speed limit wheel on the trigger.
ADJUSTMENTS: the electronics unit is standard, with a through switch of direction of rotation. The mode switch, like most analogues, is slide-mounted and is located on the upper side of the gearbox.
SUMMARY: Drills with a stylish and ergonomic design. Especially convenient when working with frequent changes of bits and drills.
Baikal E-132 AT
Impact drill / driver (Russia, Izhevsk)
TOOL TYPE: professional.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: the power is pretty decent, so a two-speed gearbox will not be superfluous at all. it more fully implements the capabilities of the 800-watt engine. High speed is included for drilling holes in wood or plastic, or when using thin drills. Low. for work with heavy load, in a reverse mode or for threading. The synchronization mechanism allows you to switch speeds without waiting for the spindle to stop (naturally, the load must be removed).
If you engage the percussion mechanism, the drill will cope with concrete. Effective ventilation of the engine is ensured by the shape of the housing made of fiberglass reinforced plastic.
ADJUSTMENTS: the electronic control unit of the Dutch company Capax does not functionally differ from its analogues, but when compared with domestic products, it pleases with ergonomics. According to the manufacturer, it is also a good resource.
On the gearbox on top. slider for turning on the shock mechanism, on the left. speed shifter. The additional handle is fixed in any position on the right or left side. At the same time, the depth gauge stops.
SUMMARY: powerful domestic-made drill with a wide range of features.
Blaucraft BSB 850/2
TOOL TYPE: professional.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: speed limiting wheel. convenient means of adjustment. But when using it, the power output also drops, which is not always acceptable for work where this characteristic is very important. The main advantage of the Blaucraft BSB 850/2 drill. two-speed gearbox eliminating this kind of complexity. If the material is soft, it is better to drill at high speeds. If solid. at low, so the torque will be greater (note that the power in both cases remains maximum).
So that when changing the type of work, changing the equipment does not take much time, the model is equipped with a quick-clamping chuck. Thanks to this, the nozzles are changed without the use of additional tools.
ADJUSTMENTS: speed is adjusted by pulling the trigger and the wheel built into it. Over it. a checkbox for setting the direction of rotation, and on the side there is a lock button for the on mode. The shock mechanism is activated by the slider on the top of the gearbox. On the left side of the latter. speed switch.
SUMMARY: simple drill with a two-speed gearbox and keyless chuck. Suitable for working with different materials.
Metabo Sb E 600 RL/ Sb E 600 RL Impuls
Impact Drills / Screwdrivers (Germany)
TOOL TYPE: professional.
OPERATING MODES: drilling and percussion drilling.
CONSUMER ANALYSIS
DESIGN: The “average” power, relatively light weight and impressive functional equipment allow us to use these Metabo impact drills with constant convenience both for drilling various materials and for screwdriving. In the last incarnation, the Sb E 600 RL Impuls is more convenient, equipped with a pulse spindle rotation mode. His appointment. to ensure confident twisting even thoroughly “stuck” screws and screws. The principle of operation is simple. the cartridge does not rotate uniformly, but in sharp jerks following one after another at a certain interval.
Operating experience with drills has shown that they are also suitable for threading. the absence of a "constant" electronics turns into high sensitivity to changes in the load on the spindle.
It is known that the more compact the screwdriver, the more convenient it is. It will not be difficult for the owner of any of these models to verify this statement in practice. it is enough to remove the cartridge and install the bit-nozzle directly into the spindle, since there is a hexagonal clamp. A drill with a disassembled cartridge is noticeably shorter, and its balance is better. she doesn’t bite her nose.
ADJUSTMENTS: the mode is set using the slide switch located above the gearbox. In addition, the Sb E 600 RL Impuls on the upper side of the case (above the main handle) has a torque selection and pulse mode dial.
The speed and direction of rotation are pre-set using the “starting block”, consisting of a wheel on the trigger and a flag lever.
SUMMARY: compact and reliable professional cars. The Sb E 600 RL Impuls is very convenient for screwdriving due to the pulsed spindle rotation mode.
Pay attention also to the models: Bosch PSB 850-2 RE