Can be mowed with an electric trimmer after rain

Features of the situation

Of course, such a question will not arise for those who live in the immediate vicinity of the lawn. Then you can wait a while and work when the grass dries up. But the need to remove wet grass arises immediately, if you can visit the site only occasionally. What to do if you have to mow the lawn on weekends, on another day with rainy weather, that’s the subtlety. The opinions of the summer residents themselves differ, so there is no particular sense in focusing on their position. You need to understand the nuances yourself.

electric, trimmer, rain

Is it possible to mow wet grass with a trimmer and lawn mower and how to do it?

Arrangement of a suburban area (and even a local area in the city) is a very difficult matter. Especially because you have to take care of the farm all the time. Many people also have questions about how to do this or that work, for example, is it possible to mow wet grass with a trimmer.

The role of equipment

It should be pointed out at the outset that there are two main types of trimmers that “relate” differently to wet vegetation. Some devices are equipped with a gasoline engine, others are set in motion by connecting to the mains or installing a battery. In turn, electric mowers are divided into two subgroups: with the location of the motor in the lower or upper part of the machine. Safe enough for the user to remove wet grass can only be gasoline grass trimmers or hand-held grass scythes.

In this case, it is absolutely undesirable to use an electric lawn mower. Sometimes one can come across assertions that this requirement applies only to devices with a lower motor placement. Such an electric motor directly comes into contact with water. Due to this contact, you can be afraid of a short circuit.

You Will Never Throw Away Grass Clippings After Watching This

However, do not use an overhead mower after rain.

If water does get inside the power plant, there is a risk not only of a short circuit, but also of an electric shock. It is worth noting that these restrictions apply not only to grass trimmers, but also to full-fledged lawn mowers. The assurances of manufacturers and marketers about safety should not be taken into account. To minimize the risk to yourself and your equipment, you should use a petrol cutter. But there are a few more subtleties that must be taken into account.

Even if the mower does not fail, and its owner will not be electrocuted (let’s say such a favorable situation for a minute), it is still impossible to mow wet grass with an electric trimmer. This is a deliberately abnormal mode of operation, due to which the equipment wears out too quickly. Wet vegetation is much more resistant to cutting elements than it should be. Therefore, even very well insulated motors operate with overload.

Due to the sticking of wet grass to the knives and to the spindle, the load on them will necessarily increase. This cannot be avoided, and no skill of mowers, no methods and schemes of lawn clearing help. Not only the motor suffers, but also the shaft, which sometimes turns.

Problems when mowing wet grass can also arise with gasoline-powered machines. Yes, they are more powerful than their electrical counterparts, but the load still exceeds normal values. First of all, piston pairs and other moving parts are “under attack”. If there is no way out other than using a gasoline mower, you need to take care of it. When mowing raw grass, the machine is periodically switched to idle mode without load. 30 seconds is enough to dissipate excess heat, as well as save the life of the grass trimmer.

When talking about mowing wet grass, you need to distinguish between the following possible situations:

  • it is wet after the rain;
  • It is raining;
  • the cause of moisture is a damp area (lowland or soil water).

In the first case, it is quite possible to take a chance and try to put things in order with a petrol mower. In the second, mowing is impractical. In the third, you will first have to deal with moisture and only then put the lawn or lawn in order. If you often have to mow wet grass after rain or “through dew” in a small area, then it is better to use not a grass trimmer, and not a lawn mower, but a simple hand scythe. You need to look not only at the grass that is removed, but also at the one where the power cable is placed.

Moisturizing it can be a very serious risk factor. To mow the grass after rain, you need to wait a little. A few minutes, even with a very big rush, will not noticeably reduce the time that can be allocated for mowing.

And the result may be clearly better. Mowing through dew, even with an electric lawn mower or electric trimmer, is usually allowed.

As for mowing raw grass, there are still the following objections to it:

  • It is more difficult to walk with a trimmer or lawn mower in such conditions, you can easily fall and get injured;
  • you will have to spend more time on work;
  • after mowing, it will be necessary to thoroughly clean the machine itself;
  • wet chlorophyll will leave more stains on clothes, leather, shoes.

Now you need to figure out exactly how to proceed if you still decide to use a gasoline grass trimmer to clean your lawn or lawn in wet weather. An important rule is to maintain the optimal length of the grass. By overly shortening it, especially in the summer, summer residents run the risk of provoking early drying of plants. It is unlikely that this will contribute to a good appearance.

Safety requirements are standard: you need to wear goggles and gloves, and take care of the protection of your feet.

Of course, they wear sturdy, waterproof shoes. Headphones or earplugs are used only when working with a two-stroke petrol trimmer. On a large clearing with flat grass, mowing is carried out along imaginary squares, conventionally dividing the entire territory into them. They first move along the perimeter of each square, then mow it from the inside and move on to the next part of the lawn. Regardless of the weather, before starting work, you should do the following:

  • check the serviceability of the equipment;
  • remove all debris and foreign objects from the site;
  • replace, if necessary, worn cutting elements;
  • determined with the direction of the mowing, so that the lawn does not resemble a “washboard”.

For information on how to mow wet grass with a trimmer and lawn mower, see the next video.

Why not trim wet grass with a grass trimmer

There are indirect reasons why it is impossible to mow grass wet from dew or rain in a personal area. They include:

How can you turn off the brushcutter when cutting wet vegetation? It’s very simple. It is displayed as a result of a short circuit when water enters the supply compartment. In addition, even if everything is tightly closed, there is a high probability that the engine will not be able to withstand the heavy load of the flexible grass trimmer shaft. And the shaft itself can turn. Such loads are most often caused by wet grass sticking to the knives and the spindle to which they are attached.

How To Mow A Lawn That Is Wet or Damp

With petrol engine trimmers, mowing in wet weather increases wear and tear on major components and assemblies due to heavy loads. Here you can note the premature failure of a pair of pistons, as well as other moving parts. Often a pair of pistons fail due to engine overheating. In our case, the engine will overheat from the load created by wet grass during mowing.

If you are mowing wet grass with the gas trimmer, to avoid overheating the engine, let it idle for 30 seconds at idle speed. This eliminates excess heat and controls piston vapors.

Optimal sowing time

The result from sowing directly depends on the factors of moisture and heat. In spring, the best month to start sowing work is when the snow has melted and the soil no longer sticks to the sole. From about April to mid-May.

In summer, good conditions with the right humidity and temperature are observed in June. In the middle of the season, doing it is a risk. Those who disobey the advice of experienced gardeners get one of 2 results. The first. the grass did not sprout, the second. rose, but of very poor quality.

Summer sowing is best done early in the season.

The optimal season is autumn. Try to do it 45-50 days before the frost starts. At the beginning of autumn, you can safely sow and still have time to mow it. The result will not cause a crazy reaction, but next year, you will already have a ready and beautiful lawn.

The subwinter period is eligible for sowing if the temperature does not drop below 3 degrees Celsius and the ground is loose. During this period, increase the amount of seed by 1.5-2 times. Compact the soil immediately after sowing. The advantage of this option is that you can see the ascent of the first grass in early April, when it is not yet possible to sow landscaping.

Is it possible to cut wet grass with a grass trimmer

While in a private home, it is easy to maintain systematic lawn maintenance. Even in damp weather, wet grass can be cut with a lawn mower or trimmer one day after it dries. It is much more difficult to maintain natural grass in rural areas. Since the visits take place on weekends, mow on these days. But what if the weather gets rainy?

The question is, can you often mow wet grass with a grass trimmer or lawn mower to hear from the gardeners. Opinions on this issue are fundamentally different. Some argue that this is possible, referring to the old adage “scythes for the grass.” as an example. The second is definitely “No.” So where is it really? Who to believe?

Correct mowing of young grass

To ensure that the device works with maximum efficiency and lasts several times longer than the warranty period, mow the grass correctly, observing the following recommendations.

  • Do not lower the coil (drum) of the device under the very roots of the weed. the distance to the ground is at least 5 cm.
  • When mowing taller grass, cut the top first. Cutting the grass close to the root without removing the upper part of the stems will lead to tangling of the line, stopping the drum before it is forced to turn off.
  • Do not mow against the direction of the drum.
  • Mow decorative grass near walls or a fence without moving the grass trimmer drum too far. This will save the motor from overload.
  • After every 15 minutes of operation of the electric trimmer, the engine must be allowed to cool down. it takes at least 20 minutes.

When is the last time to mow the lawn before the cold weather

The last mowing of the lawn is carried out in the middle of autumn. Depending on the temperature regime, it can be September or October, until the air temperature drops below 10-12 degrees Celsius.

On the danger to lawn grass

Many people have probably noticed that if you cut wet grass with a grass trimmer, the cut will break. Subsequently, it dries up, and the grass itself begins to turn yellow. This can happen for several reasons:

In the first case, you should wait until the vegetation is dry. When dry, the grass always becomes tough. In the second case, replace the line with a thinner or different profile. As practice shows, a flat cut on wet grass can be obtained through profiled squares with square or star sections.

Those who tried to mow the grass at least once in the dew or rain noticed that the vegetation next to the knife and spindle was strewn with heaps. If they are not removed in time, bald spots will appear on the lawn where the wet grass falls. Tapered piles begin to rot and the lawn begins to ache. This is what unattractive baldness looks like.

So, dear readers, decide for yourself if you can mow wet grass with a grass trimmer and lawn mower if you still want to keep your lawn tidy before the cold weather sets in.

Trimmer storage and care

Petrol grass trimmers require extra care. In addition to cleaning and lubricating cutting and rubbing surfaces from plant sap and dirt, it is also necessary to take care of the engine. The fastest way to get clogged is the air filter. Its cleaning frequency is about 10 hours. In addition, sometimes the fins of the engine cooling radiator become dirty, which is why it quickly overheats, and this can lead to its seizure. How to clean the radiator and air filter is described in the instructions for a specific gas trimmer.

Before leaving the grass trimmer for long-term storage at the end of the season, drain all fuel from the trimmer, then start the engine and wait until it stops. This ensures that there is no fuel in the reservoir and carburetor. After the engine has cooled down, unscrew the spark plug, pour 30–40 ml of two-stroke oil into the cylinder, slowly crank the crankshaft using the starter cable so that it is distributed over all cavities inside the engine, then screw the spark plug back into place. After that, you need to disassemble the bar, if it is disassembled, cover with a preservative grease all metal parts that can rust and then store the grass trimmer in a place protected from moisture.

After finishing work, it is necessary to wipe and roll up the wires and extension cords for electric trimmers, and put the battery on charge for rechargeable trimmers, since it is not recommended to store the grass trimmer even for a very short time with a discharged battery. this leads to a quick failure. After that, you should remove the head, since you will have to clean both the protective casing and the insides of the drum itself. If this is not done, the herbal juice may dry out on them and cause the line reel to stop functioning normally the next time it is started.

Cutting wet grass, plus Bermuda Grass tips

It is much easier to prepare electric grass trimmers for long-term storage. The main thing is to protect them from moisture penetration into the control circuit and the engine, as well as from rust on unprotected metal elements with the help of a preservative lubricant. It is imperative to charge the battery before storing, then your grass trimmer will be as good as new in the spring.

When and how to apply

If you are using a gooseneck grass trimmer, only use plastic knives or fishing line. This requirement is due to safety regulations. Note that a plastic grass trimmer knife is often applied by the manufacturer himself to his products. But much better is a disc metal head with a variable number of blades. She doesn’t even care about the thickets of old weeds and burdocks, about which more than one hundred meters of fishing line can be torn. And in this case, plastic knives are bad helpers.

If you often work large areas with small shrubs or simply excessively tough grass stalks, you should only use the metal attachments. Note that collisions with stones or some kind of metal rubbish (from agricultural machinery) also lead to their failure in most cases.

Lawn mower

It is clear why this unit is so named. it is a technique for mowing grass on the lawn. Looks like a cart on wheels with special blades and a device for collecting cut grass. Lawn mowers come in different models:

  • with a gasoline engine;
  • powered by the mains;
  • rechargeable;
  • spindle.

As in the case of trimmers, gasoline lawn mowers are mobile, they can work far from home. But they have a lot of weight, are more difficult to use and they also make a lot of noise.

Lawn mowers with an electric motor are lightweight, do not make a lot of noise, are well cleaned, and are absolutely harmless to the environment. The disadvantages include the need for a nearby electrical network.

Rechargeable batteries are good for everyone: there is little noise, the lawn is even, it is easy to work, only the battery lasts for a certain time.

Spindle mowers are those that do not have an engine. The device is designed as if the lawn is being cut with scissors. It turns out very nicely and neatly, but the process is very time consuming.

Why not mow trimmer wet grass

There are also indirect prerequisites for why it is impossible mow down grass wet from dew or rain on the backyard. These include:

Most to disable the brushcutter by mowing moistened vegetation? Everything is very simple here. It is displayed at the end of a short circuit when water enters the power compartment. In addition, even if our client remains perfectly sealed, there is a great possibility that the engine will not withstand the heavy load put on the flexible shaft of the grass trimmer. Well, the shaft itself can turn. Such loads in most cases appear from the sticking of wet grass on the knives on the spindle to which they are attached.

Is it possible to mow after rain with a trimmer

The nuances of working with a fishing line. practice

The aspects of the work of a brushcutter for a good lawn mowing and other purposes are described. My personal experience. My pages:.

Is it possible to mow wet grass with an electric lawn mower

Increasingly, summer cottages are becoming not only a territory where you can grow fruits and vegetables, but also a place for recreation. Allocate zones on which they put gazebos with barbecue and break flower beds and lawns. To have such a lawn, not so much effort is needed: water it and cut it in time.

What trimmers can you cut wet grass

To realize which trimmers of course mow down wet grass, and which ones are not, you should deal with their device. Today, two main types of brushcutters are available to the consumer:

Electric trimmers, based on the location of the motor, will be:

  • Top-mounted electric motor;
  • Bottom-mounted electric motor.

Based on the convictions of safety precautions, mow grass soaked from rain or dew, of course, only with a gasoline trimmer or “Lithuanian”. The introduction of an electronic brushcutter is very unnecessary. Especially when it comes to devices with a bottom motor, because they are in the area of ​​water ingress. Therefore. sometimes Kutsei Closure happens.

Is it possible to mow the grass in the rain

It is often unclear to gardeners whether it is possible to mow wet grass with an electric lawn mower. Unlike a manual grass scythe, mowing damp grass with a gasoline lawn mower is not worth it, and an electric one is not at all worth it. When working with an electric trimmer, even with a similar lawn mower, moisture can get into the electric drive or wires, a short circuit will result, and in the best case, the tool will burn out, and in the worst case, the operator will also suffer.