Chain saw safety helmet. Chain saw safety helmet

What is the Best Chainsaw Helmet for a Small Chainsaw?

You woke up to the sound of birds in your garden as you watch the beautiful flowers bloom.

Today’s the day when you trim a few small trees and branches in your garden to make it even more beautiful. So you bring out your trusty small chainsaw and get busy.

Suddenly you hear a crack and the next thing you know you’re being rushed to the hospital.

When you come to your senses, your wife informs you that a falling branch hit your head and knocked you out cold. You spend a few days in the hospital and are back home to your beautiful garden.

But this time you promise yourself never again will you use a chainsaw without a chainsaw helmet.

This post will help you find the best chainsaw helmet for your small chainsaw so you never have to face an injury when using it.

Product Rating Price
Husqvarna ProForest Chain Saw Helmet 1 Check Price
TR Industrial Forestry Safety Helmet 2 Check Price
Oregon 563474 Chainsaw Safety Protective Helmet 3 Check Price
ERB 14371 Chain Saw Safety Kit 4 Check Price
Neiko 53880A 4-in-1 Safety Helmet 5 Check Price

What is a small chainsaw?

A small chainsaw is one of the best tools for your pruning needs in a garden. You can choose a chainsaw with a bar length that ranges between 12 to 16 inches for your garden.

The small chainsaw is powered by an electric, gas, or battery operated motor.

Do you need a small chainsaw?

There are some tools that can help ease your work in the garden. A pair of cutting tools are essential for your pruning and trimming needs.

For branches and stems less than 1 inch thick, you will need a good pair of bypass pruners. Anything between 1 to 2 inches thick would be better cut with a bypass lopper.

If you have a few branches that are more than 2 inches thick, you would find it easy to cut with a good pruning saw. But if there are a lot of branches you will find the job tedious. For such work, it’s better to invest in a good small chainsaw that can cut branches with ease.

What precautions should you take when using a small chainsaw?

Even a small chainsaw is a dangerous tool that can cause serious injury if you’re not careful with it.

The first thing you need to consider as part of safety is investing in good protective equipment. This includes chainsaw chaps, a chainsaw helmet, safety gloves, and goggles.

chain, safety, helmet

Chainsaw Helmet

The safety goggles will protect the debris from flying into your eyes. The safety gloves will protect your hands from scrapes and blisters while the chainsaw chaps will protect your limbs in case of a kickback.

A good safety helmet will protect your head from falling branches, your face from debris, and your ears from loud noise.

One of the most common reasons for a kickback while using the chainsaw is when it gets stuck in the wood and you try to pull it out. This can happen if your chainsaw chain is not sharp enough and gets lodged in the wood. So make sure to sharpen your chainsaw chain with an electric sharpener or buy a replacement chain if you’re just too lazy to do so.

Keeping the tension in the chain will help keep your chainsaw working for a long time to come and also help you cut with ease. Most chainsaws come with a tightening screw or knob you can use to adjust the tension as needed.

Keeping the chainsaw chain well-oiled will also help improve the cutting and life of the chainsaw. Remember to fill the oil reservoir of the chainsaw with the right amount of chain oil before use.

An electric chainsaw needs to be plugged into an electrical socket before use. So make sure you have a long enough outdoor extension cord before you use it. A gas chainsaw works on gas so be sure to fill the tank before use. If you have a battery operated chainsaw you can ensure the battery is charged before use or make use of a spare battery that is already charged and ready.

Remember to test out the safety handbrake that comes with many chainsaws. This handbrake ensures that your chainsaw will come to a stop in case of kickback where your hand touches it.

Keep your pets and children clear of the garden when you are working with your chainsaw. Also, make sure there are no obstacles near the trees you intend to cut that could cause you to trip.

When using the chainsaw use it from the side rather than standing directly behind it. So in case of kickback, the chainsaw will not fly towards your body.

A chainsaw should be used to cut trees and branches while standing on firm ground where you have the best balance. If you feel the need to cut higher branches either get a pole saw or the help of a professional.

The safest way to cut branches is to cut with the branch close to the end of the chainsaw bar near the engine. This will ensure that you don’t accidentally hit the tip of the chainsaw to the branch and risk a kickback.

A chainsaw helps you cut trees and branches with ease. So place it on the wood and let it do the cutting work without trying to apply a lot of pressure on it.

What is a chainsaw helmet?

A chainsaw helmet is part of the protective equipment you should use when using a small chainsaw.

Usually, the helmet will consist of an adjustable helmet, a wire mesh and/or plastic protector screen, and earmuffs.

Why do you need to wear a chainsaw helmet?

A chainsaw can be a dangerous piece of equipment even if it is a small chainsaw you use in your garden.

chain, safety, helmet

There are several ways of getting injured with a chainsaw. The most dangerous one is a chainsaw kickback where you hit the tip of the chainsaw on the wood and it bounces back towards your limbs. You can use a good pair of chainsaw chaps to protect against this type of injury.

The other common injury is from a branch or tree falling on your head after the cut. That’s the type of injury a chainsaw helmet can protect you from.

The wire mesh or plastic visor that comes with the chainsaw helmet will protect your face and eyes from wood chips that fly during the cut.

A small chainsaw might not be the loudest piece of equipment you have but the earplugs on the chainsaw helmet will protect your ears from damage.

How to choose a good chainsaw helmet

It’s not nice to have a cracked head while trying to trim a few trees. That’s why it’s a good use of your time to choose the best chainsaw helmet for you. Let’s take a look at some factors that will help you decide on one.

Comfort

You’ll be spending some amount of time in the garden trimming branches. So it’s good to have a chainsaw helmet that you find comfortable to wear.

Try to pick a chainsaw helmet that comes with an adjustable system that can fit your head size with ease. Trying out several helmets is a good option before you finalize one.

Breathability

It can be tough working in your garden especially in warm weather. Wearing additional safety equipment like chainsaw chaps and a chainsaw helmet is not going to make things easier.

That’s why you need to pick a chainsaw helmet that is breathable. This means it should have a good ventilation system that allows air flow and does not cause massive amounts of heat and sweat to cover your head.

Also, check the weight of the helmet before you buy one. It’s always good to choose one that is lightweight so you don’t feel a burden on your head while doing your trimming tasks.

Accessories

The more protective equipment you wear when using a chainsaw the better. Try to pick a chainsaw helmet that comes with some sort of visor that protects the eyes and earmuffs for ear protection.

The visor could be wire mesh made of metal or a plastic screen or sometimes even both. This will protect your eyes and face from the wood chips that fly during the cut.

The plastic visor is good to prevent any kind of debris from reaching your face. But it can tend to fog up after using for a while and you need to keep cleaning it. Instead, you could use the wire mesh that will prevent most debris from reaching your face and not have the problem of fogging up.

A small chainsaw is not the noisiest piece of equipment but it’s still good to have a pair of earmuffs that will muzzle out the loud noise and protect your ears.

Safety standards

Chainsaw helmets follow certain safety standards depending on the country they are manufactured in. So choose one that follows all the safety norms of your region.

You should ensure the chainsaw helmet that you pick passes the safety checks for ANSI and CE standards such as ANSI Z89.1, Type 1, Class E, G, and C standards.

Price

We always recommend choosing the best quality chainsaw helmet that you can afford because it’s a matter of your safety which cannot be compromised.

Having said that, the chances of you getting a serious injury on your head is less when you’re working in a small garden with some small trees and branches that don’t weigh a lot.

You should be able to find some inexpensive chainsaw helmet options that are made with pretty good quality while not burning a hole in your

Reviews

Forestry

Figure 1. Personal protective equipment (PPE) that should be used when operating a chainsaw.

Whether an industry professional or homeowner that rarely uses a chainsaw, use of personal protective equipment when running a saw is essential. Proper PPE can significantly reduce the chances of a severe injury or even death.

than 36,000 injuries associated with chainsaws happen every year in the United States. On average, these injuries require 110 stitches at a cost of 12,000 per injury before factoring in losses in production and time. In Alabama alone, state agencies have reported more than 70 chainsaw-related incidents over the past 5 years.

Personal protective equipment (PPE) worn while operating a chainsaw helps protect the areas of the body at greatest risk. The left leg, specifically upper thigh area, and the back of the left hand are the two areas most prone to injury. The head and upper torso are both at risk from falling debris and chainsaw injury from rotational kickback.

Essential PPE for chainsaw operation includes a hard hat, cut-resistant safety chaps, and eye and hearing protection (figure 1). The possibility of injury is so great that even those assisting the chainsaw operator should wear the full recommended protective equipment.

The left leg, specifically the upper thigh area, and the back of the left hand are the two areas most prone to injury.

Head Protection

A hard hat (figure 2) protects the head from falling debris, such as limbs and branches, and from injury due to hits against low-hanging objects. The shell of the hard hat is typically made of a high-density thermoplastic that is durable and resistant to falling debris and impacts.

What to Look for in a Hard Hat

A hard hat should have three components: shell, suspension, and chin strap (figure 3). These components must be properly functioning, free of damage or defects, and properly worn by the user. Do not drill ventilation holes into the shell of a hard hat that was not manufactured with them. Some hard hats are designed by manufacturers to have ventilation ports; however, there is some risk of small debris entering through these areas.

Figure 2. Hard hats are an essential piece of PPE. Multiple styles are available. Figure 3. Essential components of a hard hat. Figure 4. A date of manufacture is stamped onto all hard hats.

Regularly Inspect Hard Hats

Inspect your hard hat before each use. Cracks or other physical damage can reduce effectiveness. Over time, excessive sunlight exposure, chemical exposure, and age can cause the shell to become brittle and unsafe. A simple method to test the elasticity of the hard hat is to push in on the exterior sides; the hat should compress inward and quickly expand to its original form. If this doesn’t happen, or if the hard hat begins to make a popping and cracking sound or develops a crack, replace it. Other warning signs of a damaged hard hat shell include fading color or chalky appearance. Also inspect the suspension straps for cut or frayed straps or damage to the connections to the shell.

When to Replace Hard Hats

Replace a hard hat 5 years after the stamped manufacture date, or sooner if it is damaged or experiences signs of wear as outlined above. All hard hats will come with the date of manufacture stamped inside (figure 4). This date is displayed by two dial-like symbols with an arrow inside pointing to a number. The first dial points to the month, and the number alongside the arrow designates a year. The second dial arrow points to a number specifying the date.

How to Wear a Hard Hat

Position your hard hat squarely on the top of your head, facing forward. Keep the space open between the hard hat shell and the suspension. Do not store items inside the hat or wear a baseball cap; this could cause a head injury when the hard hat compresses when struck by a falling object.

An often unused component of the hard hat is the chin strap. A hard hat will come either with the chin strap permanently attached or with slots for a chin strap attachment. Chin straps help secure the hard hat to your head in situations where you are leaning over, in high winds, or in an elevated area.

Leg Protection

Wear leg protection at all times when operating a chainsaw. The most common form of leg protection is cut-resistant safety chaps, commonly referred to as chainsaw chaps. It is important to understand that this style of chaps is not cut-proof; it does not eliminate all risks to legs but does reduce the potential for injury.

How Safety Chaps Work

Chainsaw safety chaps are composed of a rough exterior layer and an interior layer composed of long strands of nylon, polyester, Avertic, or Kevlar that extend the length of the chap. When a moving chain comes in contact with the chaps, it easily cuts the exterior layer while the inner strands pull out and tangle the drive sprocket. This quickly and effectively slows or completely stops the moving chain.

Types of Chaps

Chaps come in three styles: apron, calf wrap, and full wrap. Apron styles provide protection from the hips down to 2 inches past the top of the boot minimum on the front side of the leg only (figure 5). Calf-wrap chaps provide protection in the same areas as apron styles plus cover the entire calf (figure 6). Full-wrap chaps provide protection around the entire leg, including the calves and thighs.

Chaps are manufactured with a range of protective layers, or ply, which correlate to the size of chainsaw used. All chainsaw safety chaps should come from the manufacturer with an Underwriter Laboratories (UL) label verifying that the level of leg protection has been tested and meets the minimum cut resistance standards.

Figure 5. Apron style safety chaps. Figure 6. Calf-wrap safety chaps. Figure 7. Chaps should extend to the top of the foot.

Selecting the Right Size Chaps

Chainsaw safety chaps are designed to be worn over clothes. Proper fit is essential to maximize the functionality of the chap. When purchasing a set of safety chaps, pay attention to the length of the chap and how it is measured. Some manufacturers use a standard pant inseam for sizing, while others provide the overall length of the chaps as a size reference.

Tips for Wearing Chaps

Chaps should fit snugly with all straps connected, not just the hip strap. If all the straps are not securely buckled, the moving chain could potentially pull the chaps out of the way, exposing your leg. Chaps should also extend down to the top of your foot (figure 7).

Chap Maintenance

Clean chaps according to manufacturer guidelines. This typically involves washing with a mild detergent and air drying. Never put them in the dryer; the cut-resistant material could be damaged. If chaps have been folded and stored, a good practice before use is to unfold and shake the pants; this helps the internal fibers to realign. Lastly, if the chaps are ever damaged and interior fabric is exposed, dispose of them. Never try to close the hole by sewing or patching.

Eye Protection

Wear safety glasses or goggles to prevent flying debris from entering your eyes. Eye protection should be impact resistant and offer protection on all sides.

Corrective glasses and sunglasses typically do not offer this type of protection and should not be worn in the place of safety glasses. If either of these types of glasses is needed, wear a safety goggle over the outside of the glasses or a face shield to ensure proper eye protection.

Tip: Keep safety glasses clean and apply an anti-fog coating to reduce fogging and the temptation to remove and cut without glasses.

Some hard hats designed for chainsaw use may come equipped with a clear plastic or mesh face shield (figure 8). The clear plastic will suffice for eye protection, but safety glasses or goggles are considered better. The mesh face shield will help prevent large pieces of debris from getting into eyes but should not be used in place of safety glasses.

chain, safety, helmet

Figure 8. Hard hat face shields can be clear plastic or mesh. Figure 9. Earplugs are inserted into the ear canal. Figure 10. Ear muffs should fit snuggly over the entire ear.

Hearing Protection

Gas-powered chainsaws operate at a sound level of 110 decibels, which will cause hearing damage if prolonged exposure occurs. To mitigate hearing damage, wear hearing protection whenever the saw is in operation. To ensure adequate hearing protection, noise should be reduced to below 85 decibels. Since most chainsaws operate at 110 decibels, or more, hearing protection should exceed a 25-decibel reduction. Two acceptable forms of hearing protection are earplugs and earmuffs.

Earplugs

Earplugs are manufactured out of a soft plastic or foam and designed to be inserted into the ear canal. Earplugs are typically the cheapest in cost and most effective in noise reduction, but they may not be the most comfortable to wear.

Tip: Earplugs must be used correctly to be effective. To properly insert earplugs, reach over your head with the arm opposite the ear being plugged. Pull up on the top of the ear to straighten the ear canal and insert the plug.

Earmuffs

Earmuffs are designed to fit snugly over the entire ear (figure 10). Noise reduction and hearing protection from earmuffs will vary depending on style. Some hard hats come equipped with earmuffs. To maximize hearing protection, they must cover the ears and fit snugly against the head.

In some situations, wearing both earplugs and earmuffs may be necessary. Wearing both does not increase sound reduction capacity but will increase the amount of hearing protection. The added protection is calculated as a 5-decibel increase of the higher level of protection. For example, if you are wearing earplugs that offer 33-decibel reduction and earmuffs that offer 25-decibel reduction, the level of protection will be 38 decibels (33 decibels plus 5).

Foot Protection

Figure 11. Gloves should be worn when performing saw maintenance.

Many cutting situations involve risk to feet and ankles, whether from missing the target or stumbling. Always wear heavy work boots or shoes with high ankle support when operating a chainsaw. Steel- or safety-toed boots will further protect your toes from being cut by the saw or crushed by heavy debris. Cut-resistant safety boots are commercially available but are not required; these types of boots provide the maximum amount of protection but can be extremely hot to wear.

Hand Protection

Although not required when operating a chainsaw, hand protection is recommended to protect hands from abrasions, cuts, and burns. Always wear gloves when performing saw maintenance or changing or sharpening a chain (figure 11); you are at greatest risk of being cut or burned in these situations. Gloves also can help you grip and control the saw better. Cut-resistant gloves are commercially available but are rigid and can make it difficult to operate a saw while wearing.

In addition to proper PPE, always wear clothing that is trim fitting and free of any ragged edges that could be entangled in the saw or snag on debris. If you are required to wear high-visibility safety vests, they should be the tear-away kind in case caught by the saw.

Bence Carter, Regional Extension Agent, and Arnold “Beau” Brodbeck, Extension Specialist, both in Forestry, Wildlife, Natural Resources, Auburn University

New September 2021, Chainsaw Safety: Personal Protective Equipment, FOR-2106

Chainsaw Helmet Lifespan

According to the general rule, all safety helmets need to be replaced after 3 years of usage. There isn’t any expiry date written on the helmet at all. Based on the manufacturing date, you can calculate the estimate expiry date.

The Author

All handymen know that safety is paramount. This is tenable in lumbering and all chainsaw-related tasks.

The Helmet is one of the key safety items that you must use when using chainsaws to work.

Just like everything else, safety gears like helmets also have an expiration date, which is necessary to discourage their usage for a long time to minimize the safety risk.

But unlike meat or bread, the expiry date on hard hats or safety helmets is a little complex.

What is the expiry date of the Helmet?

Actually, there isn’t any expiry date written on the helmet at all.

You have to calculate the date based on the manufacturing date that is etched on the helmet.

GREENDEVIL FORESTRY SAFETY HELMET CHAINSAW HELMET WITH MESH FACE SHIELD AND EARMUFFS 3 IN 1 SYSTEM

According to the general rule, all safety helmets need to be replaced after 3 years of usage.

However, if there is any wear tear or damage, you should replace it immediately.

Where to find the expiry date

The tricky point is that the date isn’t etched or engraved like normal, it is done in a rather different manner.

Instead of the regular stickers, the manufacturing stamp is raised plastic that you will find on the inside of the helmet, right in the centre.

It is in a clock form that is very easy to read.

  • Identify the stamp, it is similar to a clock face, with numbers 1-12 spread along its perimeter.
  • The number represent the month of manufacture. For example, 1 is for January and 12 is for December.
  • The arrow points at the month the helmet was manufactured in. If it is pointed at 3, it means it was manufactured in march.
  • The year is stamped in the centre of the clock-like figure. If it says 15 in the center, it means your helmet was made in March 2015.
  • Based on this you can calculate the expiry date of your helmet like in the above case, the hard hat expired in march 2018.

It is necessary to mention that there could be a different way the dates are stamped in different countries but the above one is the standard procedure in most countries.

How to Know Whether Your Helmet Has Expired?

Everybody knows that most of the products have manufacture date and expiry date printed on them.

But its strange news that although Helmets have manufacture date but have no expiry date.

Let us find some good adopted ways the people utilize whether their helmet has been expired or not.

This knowledge about helmets will help to make a wise decision according to your budget.

You can buy a new helmet or replace the old, after reading about tips and tricks.

You should know the following great instructions, which will be beneficial not only to your but also for your health in case of head injuries and wounds.

Calculate the Date of Issue of the Helmet

Keenly observe the date when you get it from your company or your workplace.

Remember when you got it from a shop and when you started to wear it to your work.

This method is easy to determine the date of manufacture.

Check the Clock-Like Symbol

With this clock, you can check the manufactures date.

The clock inside the helmet is similar to an analog Clock. Instead of minute and hour needles, there is a pointing arrow.

You may know this is the manufacture date exactly.

Year of Manufacturer

This note is very tricky to get info about the manufacturing year of any safety helmet.

Usually, it is on the face-side of the shad of any helmet.

It’s not a full written year, but you have to be assuming: for example, if there is 13, it’s confirmed that the manufacture date is 2013.

Symbols Check

All you should know, that not every manufacturing company or government has fixed regulations regarding the dates.

One should search for the symbols in the shape of lines like II or III, dots, or maybe a square.

What is the proper timeframe for using the Helmet?

It is popularly accepted that the lifespan of a helmet is 3 years, but will it function effectively till the expiration date?

Many people usually misconceive that you can use the helmet till expiration date, but it is pertinent to highlight that the expiration date is only but the maximum date that the helmet can be used.

It is categorically stated on the manufacturer’s guideline. The expiration date is not necessary the replacement date.

Helmets are generally designed to be resistive to knocks, falls and high impacts.

It can fall or drop to the floor at any time.

so, the helmet is usually exposed to harsh weather when it is worn.

According to e manufacturers, it is advisable to replace your chainsaw helmet once it faces a huge impact.

After impacts, you may not notice a crack or breakage on the helmet, but you should replace the helmet immediately is experiences a fall or impact.

The date of replacement of your helmet is not fixed.

It depends on two key factors – the manufacturing and the things that happen to the helmet.

Once you buy a new Helmet for your chainsaw, you should take note of the manufacturing date and the date of first use.

Need may arise for you to replace your helmet on day one if you are not careful.

so, what happens to your helmet depends on circumstances and how careful you are.

For instance, a heavy stone may fall on your helmet and it crashes just after two months of use.

You have to stop using it immediately and your replacement date will be two months. Always check your helmet for cracks, scratches, and holes.

Storing up your helmet will not help either because the same rule applies for helmets that have never been used.

Helmet is made of plastic and will degrade with time, so storing it up for a long time will increase the rate of degradation.

So, avoid using old helmets because helmet is designed to withstand hard knocks, falls and impacts, but when it degrades, it would crack once it experiences a slight knock or impact.

My name is Chris Ross. I’m an arborist by profession a blogger by passion. Currently I live in Austin, United States. Being in the cutting services for more than 10 years, I know a thing or two about chainsaw. I love to write about chainsaw for homeowners and professionals. I hope my epic guides will help you to choose,buy and maintain chainsaw.

Top 10 Best Chainsaw Helmets for Head Safety Tested [2023]

Whether you use a chainsaw occasionally to trim branches or professionally to take down trees, the need for safety can never be emphasized enough.

Working with a chainsaw means debris can fly toward your face, branches can fall on your head or even you can fall while cutting the top branches.

Hence, you must wear the best chainsaw helmet to protect yourself.

And I don’t mean just any hard head cover. You will need a proper chainsaw safety helmet with a face guard and ear protection.

That being said, selecting a good chainsaw safety helmet can be quite troublesome. An occasional user wouldn’t need the same helmet as an arborist.

So, to help you out, we went out and got hands on some of the best available chainsaw helmets in the market.

After extensive research and testing, we were able to shortlist 10 of these helmets as the absolute best among the rest.

So, let’s discuss the details of these amazing safety helmets for chainsaws.

Top 10 Best Chainsaw Helmets Compared and Tested [2023]

TR Industrial Chainsaw Safety Helmet— Overall the “Best Chainsaw Helmet” of 2023

Size: Adjustable | Material: Plastic, Fabric, Steel | Ear Muffs: Yes | Visor: Plastic and Mesh | Safety Rating: Z89.1-2003 ANSI

TR Industrial forestry safety helmet is designed for seasoned professionals to provide ultimate protection. Without a doubt, it is the best chainsaw helmet you can get in 2023.

The safety helmet comes with a mounted face guard and ear muffs that ensure all-around wood-cutting protection even in the harshest of conditions.

You have the choice to mount either a transparent plastic face guard or a mesh guard according to work demand.

The ear muffs reduce noise up to 23dB. Hence, when working with a gas chainsaw, you won’t feel any discomfort in your head from the noise.

The best part is, the helmet comes in a single size with an adjustable knob. So, there is no need to get worried about getting the wrong size. One size fits all.

Also, the helmet is ANSI and CE-approved for safety.

What We Like

  • 4-in-1 Safety Helmet
  • Ultimate Protection
  • 2 Types of Face Guard
  • Noise Reduction Ear Muffs
  • One Size for All
  • ANSI and CE Approved

Why Consider TR Industrial Chainsaw Safety Helmet?

This helmet is designed for semi-professionals and full-time electric chainsaw users. It is reasonably priced and ensures ultimate protection against splinters, debris, and falling branches.

Husqvarna Pro-Forest—Best Chainsaw Helmet for Professionals in 2023

Size: Adjustable | Material: Plastic, Fabric, Steel | Ear Muffs: Yes | Visor: Mesh | Safety Rating: ANSI Z89.1-2003 Class G-E-C

Husqvarna is a name that doesn’t need any introduction. They are one of the best chainsaw manufacturers in the world.

That is the reason, their safety equipment is also rated as one of the best for both professionals and homeowners.

The Pro-Forest chainsaw helmet comes in a universal size that fits all heads. The helmet offers superior head protection, while the face mesh and ear muffs protect your face and ears.

Working with a battery-powered chainsaw has never been easier. The UV-protected hard hat will prevent the sun from overheating your head, and also Hi-Viz orange color will allow your friends to locate you in the thick forest easily.

Also, the helmet has 6 point suspension system that protects you against falling branches and falls. So, even if you fell from the tree, no harm would come to your head.

One more thing, this helmet comes with a rain neck protector. Hence, you will be able to work in adverse weather conditions easily.

While our previous choice didn’t allow you to remove the earmuffs, this one does. However, you have only 1 mesh guard, and no plastic visor is included.

What We Like

  • Professional Grade Helmet
  • Superior Head Protection
  • 6-Point Suspension System
  • Hi-Viz Color
  • Removable Ear Muffs
  • Rain Neck Protector

Why Consider Husqvarna Pro-Forest Chainsaw Helmet System?

Professionals who are going to be cutting the top branches of a tree need something that can protect against falls. Husqvarna’s 6-point suspension system ensures fall protection while the mesh guard and ear muffs give all-around protection.

Oregon Protective 563474 —Best Chainsaw Helmet for the Money [2023]

Size: Adjustable | Material: Plastic, Fabric, Steel | Ear Muffs: Yes | Visor: Steel Mesh | Safety Rating: ANSI Z89.1-2003 Class G-E-C

If you are looking for the best bang for the buck, you should definitely check out the Oregon Protective Chainsaw Helmet which is both lightweight and impact resistant.

This amazing helmet comes in a stunning yellow high-visibility design and also has ventilation holes for breathability.

The impact-resistant helmet has a suspension system that protects you against bumps, falls, and falling branches on your head.

Adding to this, the 6-point easy adjustment system ensures that you get a tight fit on your head no matter the size.

So, one size is bound to fit all heads, and you will get a snug fit. Trust me, the helmet won’t get loose.

One thing I loved about this helmet is the wider and more durable steel mesh visor. Oregon really knows what matters while working with a chainsaw.

While our previous picks lacked ventilation holes, they allowed you to work in rain and harsh weather conditions. Obviously, the ventilation holes make it difficult to use this helmet in rain. But you can always tape them when needed.

What We Like

  • Stunning Yellow Color
  • Ventilation Holes
  • High Durability
  • Impact Resistance
  • Wider Steel Mesh
  • Tight Fit

Why Consider Oregon Protective Chainsaw Helmet?

Oregon Protective Chainsaw Helmet certainly provides the best value for the money. The helmet is more durable and the mesh guard is the absolute best. Its wide circumference ensures side protection from debris.

NoCry 6-in-1 Industrial Safety Helmet—Best Homeowner Chainsaw Helmet 2023

Size: Adjustable | Material: Polycarbonate and Fabric | Ear Muffs: Yes | Visor: Polycarbonate and Mesh | Safety Rating: ANSI Z87.1 Class G-E-C

NoCry chainsaw helmet ensures professional-grade safety with an adjustable easy-fit helmet, earmuffs, and two face guards.

It is an all-in-one affordable safety helmet for semi-professionals and homeowners. So, whether you are cutting trees, logs, or firewood or just trimming and pruning your garden with a mini chainsaw, the helmet and gear will ensure the ultimate protection.

This heavy-duty protection gear comes in a lightweight design and ensures comfort as part of the deal. So, you won’t feel any unease while wearing this gear.

Ultimate protection for your eyes, ears, and face. Working with a chainsaw can quite irritating for hearing. Noise reduction ear muffs make sure you remain comfortable.

Each part of NoCry safety gear has been tested and approved for rating. The manufacturer shares ANSI ratings for Helmets, Face Guard, and Ear Muffs which we verified.

Unfortunately, the steel mesh doesn’t cover the side like with our previous pick. But, if you aren’t doing heavy-duty wood-cutting work, you don’t need to worry about it.

What We Like

  • Comfortable Wear
  • Easy Adjustment
  • Affordable Price
  • Each Part is ANSI Certified
  • Noise Reduction Ear Muffs
  • 2 Types of Visor

Why Consider NoCry 6-in-1 Industrial Safety Helmet?

For homeowners who need all-around protection at a reasonable price, No-Cry is a perfect option for them. It offers 6-in-1 protection and protects your hearing, vision, and head.

Pfanner Protos Integral Helmet—Best Chainsaw Helmet for Arborist

Size: Variable (See Size Chart) | Material: Plastic, Fabric, Steel | Ear Muffs: Yes | Visor: Mesh | Safety Rating: ANSI Z133, EN 397 and EN 12492

For professionals who are not ready to make any kind of compromise on their safety and are willing to spend whatever it takes to get it, Pfanner Protos is a good choice.

This ultimate protective headgear, though a bit expensive, offers the best available protection for working on sloppy or tall surfaces.

You must consult the size chart before purchasing to order a perfect fit for yourself. There is no size adjustment, so you need to make sure that you have got the right size.

Manufacturers have shared a detailed size chart that helps you select a perfect fit.

The feature that I absolutely loved with the shell-like shape of the overall headgear. The mesh guard and ear muffs do not pop out like with other helmets. They are beautifully snuggled into a motorbike helmet-like design.

High-ventilation design enhances the breathability of the helmet. Air can flow in from all sides and remove from ventilation shafts.

Also, the face guard and ear muffs are easily removable.

The only downside is the price. This chainsaw helmet is a highly expensive premium design. So, only full-time heavy-duty professionals prefer it.