Cultivator Texas what kind of oil. Video: Cultivator Texas oil replacement

What oil to pour into the Texas cultivator

Consider the procedure and features of oil change in cultivators. Regardless of the type of engine, it is not recommended to use individual additives for lubricants, which are in large quantities on the market. This can reduce the performance of the composition.

The spent product should be disposed of with the least damage environment. The best solution is to take the old oil to the processing point.

In the engine

The first oil replacement in the cultivator engine is carried out after running. This is the name of the process of grinding the moving parts of the apparatus, during which small metal particles fall into grease. The duration of the running.In depends on the specific brand of the cultivator. Subsequent replacements should be carried out, guided by the regulations for maintenance of the user managers, but at least once a year.

The process of replacing the lubricant in the cultivator engine is quite simple:

• The cultivator must be installed on a horizontal plane and drowned;
• We wait for 5-10 minutes to make the oil completely glass into the engine of the engine;
• Unscrew the crankcase plug, drain the oil into a pre.Prepared container;
• Pour new lubricant fluid. Check the level with the probe, and in its absence. Pour the oil to the control hole.

Important information! When planning the frequency of conduct, it is necessary to take into account the intensity of the load. If the lubricant darkened to the color of the fuel oil, it should be urgently replaced.

In the gearbox

Oil change in the gearbox should also be performed in accordance with the recommendations of the manufacturer.

• Install the cultivator on the stands and drown it out;
• Find and surround the drain plug;
• In order to avoid environmental pollution, lubricants must be drained into a pre.Prepared capacity of a suitable volume;
• We are waiting until the oil is completely dragged out of the drain hole. Since transmission lubricants have high viscosity, you will have to wait 5-10 minutes, depending on the temperature on the street;
• Tightly twist the plug of the drain hole;
• We unscrew the plug plug;
• Using a funnel, pour fresh lubricant fluid.

The level is checked using a probe or control opening, depending on the design of the cultivator gearbox.

Please note that most modern models are supplied with a dry gearbox, in which you need to pour oil after buying

Varieties of oils

To extend the service life of a 4-stroke engine, you should choose the right motor oil. In addition, its untimely replacement leads to Rapid wear and reduction in the operation of the unit. How to choose the right oil, in what period it is necessary to replace it?

Not only instructions for use are attached to any technique, but also a passport.

In this instructions, each manufacturer indicates which variety of oil is optimally suitable and extends the term for using the technique. Any lubricant in the engine serves:

Iron Talk #1130 Field Cultivator Maintenance (Air Date 12-1-19)

• For lubrication and compaction of mechanisms;
• Reduces the formation of soot;
• For cooling in order to avoid overheating;
• Protects against quick wear;
• Reduces noise;
• Extends the operability of the engine;
• For its full or partial cleaning.

During the air filter, the lubricant and its substances accumulate on the walls in the cylinder. This precipitate pollutes all the engine components and significantly complicates the stages of lubrication.

It is for this reason that in each lubricant there are anti.Oxidative components that contribute to the cleansing of the cylinder walls from the carbon monoxide in order to extend the activity of the walk.Behind tractor.

Various climatic conditions require the use of different types of oil. All lubricants are divided according to the following parameters:

The difference in oils

Different engines are installed in different models of the cultivator, so you need to know for sure? What oil is suitable for a specific motor.

For ICE

Manufacturers prescribe the use of oil for both gasoline and diesel internal combustion engine. After long tests at the factory, a list of various lubricants is installed, which are great for the product. For gasoline ICE, it is recommended to pour the following liquids in the oil container:

• SB at an average load;
• SD for working with PCV;
• SA at small loads;
• SE for 1980 release engines;
• SC without PVC;
• SH universal.

The best oils to reduce diesel fuel consumption:

For the gearbox

Any walk.Behind tractor includes a gearbox, for which it is also necessary to use transmission lubricant and replace it in a timely manner. For high performance, such transmission substances should be poured into a worm gearbox:

• TEP-15, M-10V2, M-10G2 are great for the summer period and can operate in temperature mode from.5 degrees and above;
• TM-5, M-8g2 is used in a colder period at temperatures up to.25 degrees.

For four.Stroke ICE cultivators

Today, motoblocks for cultivators are equipped with four.Stroke engines in which there is no oil pump. In them, the bearing is located just below the connecting rod head, and the lubrication process occurs by scooping it out of the crankcase. And other spare parts and mechanisms consume lubrication using a sprayer. This type of engine operates at unstable temperature due to the air cooling system. Therefore, it is extremely difficult to choose the desired lubricant, but the manufacturer identified several suitable options:

• Four.Stroke semi.Synthetic all.Season lubrication Expert;
• Specific for diesel and gasoline;
• SUPREME High.Quality mineral oil.

Similar notes

During the operation of the walk.Behind tractor, the engine is subjected to a large load, and the engine oil is used to protect it from premature wear. The product is characterized by a chemical composition and properties, so it is used according to the classification.

As a rule, in the instructions for cars, the manufacturer indicates which brand of motor oil and to what extent it is better to use. If there are no such recommendations, the tool is selected according to the following characteristics:

The SAE parameter indicates the viscosity class of the substance and consists of a letter-cyphpric abbreviation, where the letter “W” indicates the possibility of use at low temperatures. The figure in front of it indicates viscosity with negative values ​​of the thermometer, and the numbers after the “dash” are positive. These figures characterize how easily the liquid will pump through the system and how quickly it reaches the surface of friction parts, protecting them from dry friction.

The API parameter divides the oil in operational properties into categories C and S. Category C includes products designed for four.Stroke diesel engines with air cooling, category S. For gasoline engines. Therefore, when choosing a liquid, it is necessary to pay attention to this marking, since it has a different composition for diesel and carburetor engines.

The ACEA parameter classifies the oil according to HT (viscosity at elevated temperature) / HS (shift speed), which indicates how energy efficiently oil. The higher this value, the better it protects the engine details from wear. It is recommended to pour high MPa C in tractors, mini-tractors, as well as in heavy non-unit tractors designed for heavy loads.

Below are the types of machine oil, which are most optimal for the cultivator or motoblock. Of course, they can be used if there are no special recommendations from the equipment manufacturer and in accordance with the marking S and C. Therefore, these oils:

Dual oil marking (SG / CD, SF / CC) can be added to any engine, since it is universal and equally suitable for diesel engines and engines (such as Texas motor cultivators) that operate on gasoline. Among the various lubricants, the most popular product are products manufactured under the brands Mobil, Castrol, Zic, Shell Helix. Additives. To increase productivity and quality, Additiv, Bizol, Cera Tec and others oils are added. They can be used at ambient temperatures from 25 ° C to 25 ° C.

How to change oil

In order for motorcycles to work smoothly and work for a long time, it is necessary to periodically change the oil in the gearbox and engine. The first time this is done after a breakdown, and then every 50-100 hours of operation of vehicles (and with high loads it will be necessary to “fill up more often” even more often), unless otherwise specified by the manufacturer.

Oil replacement in the gearbox

To lubricate the gearbox, any transmission oil is used, for example, TAD-17, TAP-15V or with various markings according to GOST 23652-79. Before filling, check the presence of an old liquid, if necessary, replace. First check the volume of the tank. Tests on motoblock models, such as NEVA, are performed as follows:

If the probe is immersed in a gearbox, 30 cm in the liquid does not need to be completed additionally. To obtain other results, the oil should be poured into a gearbox to the desired level. A completely dry gearbox should be filled with at least 2 liters of oil.

Replacement of motor oil

The procedure for replacing motor fluid is as follows:

Motor oil is not cheap, but you should not save on it, as well as fuel. Pour the oil only original and high.Quality, because the performance of the walk.Behind tractor, as well as the durability of its mechanisms, will depend on it. Only a quality product with the correct parameters can provide the most favorable effect and provide minimal wear of the internal parts of the engine. The instructions are suitable for such motoblocks as: STENLI (CENTS), Patriot, Tarpan, Cascade, Bunker, Agat, Oka, Balka, MTZ.

Video

Oil for a walk.Behind tractor. What kind of oil to pour into a walk.Behind tractor? Instructions

Not lei is the oil in the engine of the walk.Behind tractor until you watch this video.

Is there a difference between automobile and 4t moto oils? #Anton_mygt #Motoroil_vs_Motoil

Pour oil into the air filter of a walk.Behind tractor, cultivator. What for?

Service of the Neva Neva MB-2 // PARTS OF OLS in the engine // Part 1

Oil replacement in the MTZ MTZ Belarus Motoblock 09-N Honda GX 270 Honda engine. Oil in the engine.

Is it possible to fill in car oil?

A variety of lubricants intended for use in car engineers is much wider, moreover, they are sold in more stores, including network hypermarkets. In addition, if such materials are able to protect large and powerful automobile engines, then it would seem that for work in small power plants of cultivators they are quite suitable.

This point of view is quite widely, but it is fundamentally wrong:

• In automobile engines there is a powerful cooling system, in the motor instrument, simple water or air is used for this. Therefore, the probability of overheating of the lubrication here is much higher.
• The frequency of engines for motor vehicles is an order of magnitude higher, therefore, the consumables used here should be adapted to such specific conditions. Otherwise, they will not provide proper protection against wear.
• The packages of the additives used are significantly different.

In addition, car oils-only for 4-stroke engines. Pouring such a lubricant into a 2-stroke motor of the cultivator will lead to deplorable and expensive consequences.

As an alternative consumable for a benzo tool, you can use oils developed for scooters, enduro and other motor vehicles. The working conditions of their engines are largely similar to the specifics of the work of cultivators, therefore, subject to key conditions. Viscosity, operational characteristics, engine appliance. Such a replacement is possible.

However, in any case, it is best to adhere to the recommendations of the manufacturer of your cultivator. In this case, you provide optimal conditions for its work, prevent its premature wear and, therefore, save your money.

Replacement in the engine of the walk.Behind tractor

Oil replacement in an air.Cooled engine is like the above scheme for the gearbox, but at the same time, has some differences:

• Oil is drained from a heated engine. On cold, it remains viscous, sticking to the details and does not drain completely;
• The wheel opposite of the drain plug is slightly lifted for better and complete runoff;
• The oil capacity in the crankcase is slightly less than in the gearbox, from 1.1 l to 1.5 l. It is also specified according to the instructions.

On the image of a motor block with a lid removed and the part of the crankcase, requiring lubrication:

Do not forget about the transmission!

Perhaps no more sensitive to the quality and regularity of maintenance is a gearbox. A gearbox of your cultivator, converting the engine effort into the necessary traction. It must also be lubricated, but the oil here should be used not the same thing that pours into the engine, but a specialized. Over, it takes a lot of it here. The gears included in the design of the gearbox should be completely immersed in the lubricant. Otherwise, they will be subjected to excessive loads. And this leads to the Rapid wear of the mechanism.

The type of oil suitable for the gearbox of your unit should be clarified by the user manual. It is recommended to use a certain lubricant for each model. However, in most cases, the deviation from these information is not critical. The main thing here is that the main characteristics correspond to the manufacturer’s instructions:

At the same time, it is recommended to observe the advice of the instrument manufacturer if possible.

In addition, you should adhere to the optimal frequency of oil change in the gearbox:

• Primary. After 25-50 mothers using the cultivator;
• In the future. Every 100-150 mothers (depends on the level of loads);
• If the tool is in storage, then the lubricant should change every 1-2 years.

In this case, it is necessary to take into account the technical condition and degree of wear of technology. The older the cultivator, the higher the loads were on it, the more often the oil should be changed in its gearbox.

Oil for the cultivator Texas

One of the most important factors affecting the engine is oil and its timely replacement. To determine the best oil for the cultivator, it is necessary to completely study the principle of operation of the device itself. Only after that can you accurately determine which oil will be optimal.

To extend the service life of a 4-stroke engine, you should choose the right motor oil. In addition, its untimely replacement leads to Rapid wear and reduction in the operation of the unit. How to choose the right oil, in what period it is necessary to replace it?

Not only instructions for use are attached to any technique, but also a passport.

In this instructions, each manufacturer indicates which variety of oil is optimally suitable and extends the term for using the technique. Any lubricant in the engine serves:

• For lubrication and compaction of mechanisms;
• Reduces the formation of soot;
• For cooling in order to avoid overheating;
• Protects against quick wear;
• Reduces noise;
• Extends the operability of the engine;
• For its full or partial cleaning.

During the air filter, the lubricant and its substances accumulate on the walls in the cylinder. This precipitate pollutes all the engine components and significantly complicates the stages of lubrication.

It is for this reason that in each lubricant there are anti.Oxidative components that contribute to the cleansing of the cylinder walls from the carbon monoxide in order to extend the activity of the walk.Behind tractor.

Various climatic conditions require the use of different types of oil. All lubricants are divided according to the following parameters:

Cultivator oil: choice and replacement

One of the most important factors affecting the engine is oil and its timely replacement. To determine the best oil for the cultivator, it is necessary to completely study the principle of operation of the device itself. Only after that can you accurately determine which oil will be optimal.

Description

Cultivator (motor.Cultivator) Texas Hobby 370 TG (370TG)The Texas Hobby 370 TG gasoline cultivator is a faithful assistant for summer residents and gardeners of amateurs. Developers recommend using it in a small area of ​​a small area, no more than 5-6 acres. On dry, clay, rocky soils and meadows, it is better not to use. Using this model of the cultivator, you can easily loosen the soil, mix the additives introduced (compost, peat, manure, fertilizer) with the ground. A miracle. The unit will cope even with trunk circles, the processing of which usually causes difficulties. Hobby 370 TG can easily dig your beds, prepare the ground for winter or landing. It is especially useful for you to work on flower beds and small beds, as well as spaces between beds. You can successfully use it in closed rooms: greenhouses, greenhouses, greenhouses. Thanks to the large selection of additional nozzles, Texas Hobby 370 TG is one of the most functional models in the world. It is not surprising that many gardeners prefer him. The model is equipped with a reliable 4-stroke gasoline engine Texas Power Line. Its power is 3.7 liters.With. Oil and gasoline are poured into different departments. This facilitates the preparation for work. Engine speeds are adjustable from the operator panel. Fuel tank has a volume of 1 liter. The cultivator worm gearbox is reliably protected from external influences by a strong sealed, aluminum corps. The very design of the rotation from the engine to the gearbox is very reliable and safe, as it acts using a tension roller and belt. By launching the engine, you may not be afraid that milling cutters whose rotation speed is 130 about./min., They will immediately begin to rotate. A convenient handle is adjustable in height and allows you to select the desired position for work and transportation. For Hobby 370 TG, the following attachment equipment is proposed: a plow-tank, a rake, a Scarifier, a scraper-lobe, inflatable wheels. Keep in mind that using a cultivator with inflatable wheels installed on it as a traction is impossible. Model weight. 28 kg. Soil processing width. 38 cm., And the depth is 20 cm.

Advantages Cultivator gasoline Texas Hobby 370 TG

Texas Hobby 370 TG technical characteristics

The advantages of the design

Texas cultivator Hobby 500 TG consists of several important working nodes that should be highlighted. For example, this is a 4-stroke engine that is powerful enough in all its modifications. The choice of a suitable motor is a key prerogative of demanding owners. There are many more nodes that deserve special attention:

• Rama. Is a connecting link between other working nodes. Rama. One of the strongest elements of the design of the walk.Behind tractor. Because it is to it that all components are attached to it
• In the basic configuration of the motor block is equipped with a minimum set of milling
• Custom.Made handle. Has a flexible design. It can be adjusted for yourself to get tired less at work
• On the steering wheel, all controls responsible for gas, brake, gear shift, reverse, etc. Are located. D.
• The device has a lightweight back. This feature favorably affects the maneuverability and smoothness.
• The 500 Hobby TG model is installed above the mills. This increases stability on any ground, and thereby improves management. In addition, this location of the motor reduces the rolls in corners
• Engine protection is provided by a special bumper, which retains the motor in integrity and safety from external influences.

Technical characteristics of the motoblocks and motor cultivators “Texas” vary from the model to the model and depend on the type and power of the engine, on the design, etc. D.

The list of attachments contains a large number of devices:

• Plow;
• Hiller;
• PROPROL;
• Harrow;
• Soils;
• Potato.Armed and potato.Cutting;
• Adapter;
• Cart;
• Weighting;
• Brushes;
• Braids;
• Rake.

Reviews

Anton:

“I have been using Texas TX 602B cultivator for two years. No complaints, very pleased. I didn’t even expect that everything could work so clearly. Changed the filter in a timely manner, and the car is back in the ranks. Briggs Stratton engine Reliable “.

Valentine:

“We buried the Texas 534 cultivator, saw on the video that they cling to the goods. We tried it, so another thing, the work went as it should. And another time, three cutters were tried to put on each side, and it got better. The car is satisfied, powerful and reliable. In the spring we perform the entire plow. We transport goods in the fall on harvesting, 300 kg calmly pulls “.

Vasiliy:

“In our area, more motoblocks are common. But, if the plot is small 30-40 acres, then it is quite possible to do with a cultivator. Texas 601 with the American engine Bigs has been operating for two years. 5.5 horses are sufficient power to calmly do everything on the site, not particularly shaking. Such an unit wanted for a long time, and now I do not regret. There were small breakdowns, but spare parts are inexpensive, I changed it myself, everything is fine “.

Characteristics

Ethics of autonomous cars, self.Government and the problem of the cart

Over the past few years, more and more autonomous functions have been built into cars. And just a couple of months ago, Tesla released the following video in which she boasts of her achievement of “full self.Government”.

The TECHOPEDIA article reported that even the earlier Tesla cars contained “the necessary equipment for autonomous driving”, although the activation of this ability depended on the updating of the software.The article also provides for the difference between how autonomous cars built today will differ from future.

Currently, Tesla cars are equipped with the necessary equipment for autonomous driving, but to fully activate this function requires updating software. Although this will allow completely autonomous driving, it will also allow the man-man to take control when the situation requires intervention.

However, the next generation of autonomous vehicles will not require steering wheels, pedals or transmission.The advantage of such cars is the possibility of reducing the number of accidents and providing the necessary transport for people who are not able to drive a car, such as elderly people, people with vision or physical disabilities.

But there is a potential drawback: the need for a human agency that sets up a car programming in order to anticipate all possible scenarios and direct the car in order to make the judgments that people must do when the script requires actions that inevitably harm in one form or another.

Although Tesla is perhaps the most famous name in the field of artificial intelligence for vehicles, it is certainly not the only player in this growing market. Some of the much more respectable names in the industry also participated in this process.

Texas Lilli 534TG tiller. Cultivator. Motokultivator

Related: Interesting history of electric vehicles

Bernard Marr recently wrote about Toyota billions in unmanned cars and artificial intelligence. The company set itself the goals that it wants to achieve by 2020:

Safety history of unmanned driving

Of course, we have not yet reached this. But the question is whether this is the ultimate goal and whether we should pursue it without taking into account the consequences of a completely independent machine.

Each accident and mortality with a self.Governing car in the lists of nine accidents involving unmanned vehicles, only four of which led to the death of people. However, despite the claims to the name, the list is incomplete, because after the publication of the article in such accidents there were victims.

The latest death case, which was reported, was associated with the Tesla Model X car on March 23, 2018. The driver of the car died when he crashed into a barrier. Tesla accused this of interfering with an autonomous car driving system:

“The reason why this accident was so serious is that the shock absorber of the collision, the barrier on the highway, which is designed to reduce the impact on the concrete separator of the lane, was crushed in a previous accident without replacement,” Tesla said in a statement by Tesla.

The company added: “We have never seen this level of damage to Model X in any other accident”.

Unfortunately, the Tesla unmanned cars did not end in this accident of unmanned vehicles. A number of them occurred this year.

Among the incidents was one March 1, 2019. The National Security Council on US Transport (NTSB) confirmed that the semi.Autonomous software of the autopilot was used on Tesla Model 3, when it crashed into a tractor with a trailer trying to cross the border. On the Florida highway, the driver of the car died.

Although they are still relatively rare, in comparison with traffic accidents caused by love drivers, the fact that as a result of unmanned cars there are accidents and accidents with fatal outcome, forces people to fear their safety and programming. In fact, this year Quartz questioned Tesla’s statements about the statement.

As in the case of the Tesla accident, in most accidents with autonomous cars are dying a person sitting in a driver’s seat. However, there were cases when people outside the car were lost and killed by autonomous cars.

The most infamous incident of this kind may be the incident associated with Uber when Elaine Herzberg died in March 2018. A 49-year-old woman walked and pushed her bike through Mill Avenue at a pace, Arizona, when she was shot down by the Uber car.

The video of the incident published by the police can be seen here:

As a result, Uber accepted a policy providing for the inclusion of people in their cars. History is reported here: Uber returns unmanned cars to work, but with lovers-loves.

This is a way for Uber to circumvent the problem that we will have to encounter if and when completely autonomous cars become the norm: how to program them so that they include the instinct of preserving human life.

AI programming with ethics care

As we saw in another article “Our Widespread New World: why the development of AI causes ethical fears”, the enormous force of AI entails a big responsibility. To make sure that technology does not allow the situation worse in the name of progress.The study of the ethics of AI attracts the attention of people who think about what needs to be done before the introduction of automated solutions.

One of these people is Paul Tagard, Doctor of Philosophy, a Canadian philosopher and a cognitive scientist, raised some of the problems that we should now encounter the ethics of programming in AI in the book “How to create ethical artificial intelligence”.

• Ethical theories are very contradictory.Some people prefer ethical principles established by religious texts, such as the Bible or the Qur’an. Philosophers argue about whether ethics should be based on rights and obligations, on the highest good for the largest number of people or on virtuous acts.
• Ethical behavior requires compliance with moral values, but there is no consensus on what values ​​are suitable or even what values. Excluding the appropriate values ​​that people use when they act ethically, it is impossible to coordinate the values ​​of the AI ​​systems with people’s values.
• To build a system of AI, which behaves ethically, the ideas about values, correct and wrong should be accurate enough to be realized in algorithms, but accuracy and algorithms are extremely lacking in current ethical discussions.

Reviews

Anton:

“I have been using Texas TX 602B cultivator for two years. No complaints, very pleased. I didn’t even expect that everything could work so clearly. Changed the filter in a timely manner, and the car is back in the ranks. Briggs Stratton engine Reliable “.

Valentine:

“We buried the Texas 534 cultivator, saw on the video that they cling to the goods. We tried it, so another thing, the work went as it should. And another time, three cutters were tried to put on each side, and it got better. The car is satisfied, powerful and reliable. In the spring we perform the entire plow. We transport goods in the fall on harvesting, 300 kg calmly pulls “.

Vasiliy:

“In our area, more motoblocks are common. But, if the plot is small 30-40 acres, then it is quite possible to do with a cultivator. Texas 601 with the American engine Bigs has been operating for two years. 5.5 horses are sufficient power to calmly do everything on the site, not particularly shaking. Such an unit wanted for a long time, and now I do not regret. There were small breakdowns, but spare parts are inexpensive, I changed it myself, everything is fine “.

The principle of the cultivator “Texas

Texas motor cultivator works according to the same principles as other units of this kind: a gasoline engine drive knives that plow the ground, and the walk.Behind engines also have a wheel drive. Thus, a motorblock is a mini-tractor that can be equipped with additional equipment to expand the types of work performed.

Technical characteristics of the motoblocks and motor cultivators “Texas” vary from the model to the model and depend on the type and power of the engine, on the design, etc. D.

How to replace

Periodic maintenance of the gearbox and engine provides for timely oil replacement.

A similar procedure should be carried out taking into account the recommendations, t.To. Some errors can reduce the reliability of the design.

In the cultivator, the oil is poured through a special hole, to simplify the procedure, a watering can.

In the gearbox

In most cases, any transmission oil can be used to lubricate the gearbox. The replacement procedure is carried out as follows:

• The device is located on the horizontal plane, it is slightly tilted. Due to this, the filling procedure is simplified.
• A probe is inserted into the hole in the gearbox. It is required to determine the level of the old substance.

To replenish the oil level in the gearbox, a new. About two liters are poured into a completely dry container. Some models are equipped with a special hole for removing the old substance, in which there may be a large number of impurities.

In the engine

Oil replacement in the motor is carried out depending on the instructions of the manufacturer. Motor oil changes taking into account the points below:

• The first replacement is carried out after running the engine. It is carried out exclusively at idle, t.To. Excessive load can cause wear of the main structural elements.
• Some manufacturers recommend replacing with a frequency of 40 hours of work. A lubricant is necessarily replaced after a period of winter operation.
• Before direct replacement, it is recommended to warm up the motorcycle block. This is required to increase the fluidity of the substance. At the same time, the walk.Behind tractor is installed in the horizontal plane. There should be a drain tube in the lower part of the structure, after unscrewing the cork, the old substance is removed.
• After draining the old substance, the cork is twisted back. In the upper part of the structure there is a flood neck, level control is carried out using a probe.

By checking the level of lubricant, you can tighten the cork and turn on the engine. The first few minutes you need to operate at idle, t.To. It takes time to lubricate all structural elements.

Do you need to add oil to gasoline

Determine whether it is necessary to add oil to the cultivator gasoline, it is possible by studying the main parameters of the device. In most cases, dilution is carried out for a two.Stroke motor, recommendations are taken into account regarding proportions. The work of a four.Stroke engine is ensured when refueling with clean gasoline.

It is forbidden to mix gasoline with butter for refueling a four.Stroke engine. Such a mixture will cause malfunctions in several hours of operation.

Characteristics of Texas cultivators

Manufacturers provided for the production of equipment for various areas and depth of processing. Some models cope well with garden beds, others can raise deposits with heavy soil. In this case, the line of applied mounted tools increases the sector of the use of technology.

Design features of Texas motor cultivators:

• The machine control panel is put to the steering wheel of a special design with a convenient capture;
• The lightweight rear console improved the centering and reduced weight;
• The exclusive frame allowed to reduce the center of gravity, facilitate the control of the device;
• The engine is placed above the mills, the unit acquired stability;
• There is a front bumper to protect the motor and transport wheels.

Constructive changes in the cultivator Texas added to him technology. So, all devices have a reverse, no effort is required to pull out a buried car. Powerful cultivators cultivate a wide strip of dense ground to a depth of 30 cm. All cars have a chain drive, equipped with reliable four.Stroke engines. The disadvantage is the increased noise during operation and burrowing the nose in soft soil.

Varieties of models of cultivators

A number of Texas equipment are divided by the power of the units and the genus of the work performed. The Hobby series, as the name is clear, is used in small areas with light soil. Light cultivators are indispensable for the preparation of beds for root crops, design of flower beds and digging of greenhouse earth.

Cultivator Texas Hobby 300 Mal and Udal. He will climb into any corner of the garden, process the trunk circle, cut the beds. Energy equipment. American motor Briggs Stratton, four.Stroke, with a combustion chamber 148 cm 3, 2.6 kW with a capacity of 2.6 kW. The design uses a chain gearbox. The unit processes 38 cm to a depth of 18 cm. The device weighs 28 kg, costs 21 thousand rubles.

Cultivator Texas 500 of a hobby series, with a company TG 485 company has a power of 2.3 kW. The design uses a worm.Type gearbox. Such an unit will carry out a deep unauthorized loosening to a depth of 33 cm. The width of the processed strip 50 cm. The kit has 6 saber mills. The cost of the apparatus is 15 thousand rubles.

At the same time, the model of this series 500 B is equipped with a powerful American engine of 4.2 kW. Such a cultivator Texas uses attaching equipment:

High functionality almost did not gain the weight of the instrument, only 43 kg. Only 6 mills are included with the cultivator. Attaching equipment should be purchased additional.

The Lilli series includes a range of three tools. 532TG, 534 TG, 572 b. The power of equipment in this series is affected by the type and power of installed engines. And the most powerful of them will be the Texas 620 cultivator, which means that the equipment is equipped with a strong engine and is completely coping with the functions of the mini.Vector, if you equip it with awnings. The Lilli series is suitable for hinged guns from more powerful equipment, motor blocks Futura and Vision. The initial set of units differs only with milling machines, instead of pneumatic wheels on motoblocks.

Cultivator Texas 532 TG 620 can be equipped with a trolley, a seat, a snowman and other hinged guns.

The main technical indicators:

• Power on the output shaft. 6.5 liters. With.;
• Processing width. 100 cm;
• Chain gearbox in the steel case;
• Belt drive;
• Light starting system.

Another modification of this Lilli 532 V model has a depth of the milling cutter 21 cm with a strip width, 85 m. There are models using the TG500 motor.

Domeded from production, but there are TG My 13 PRC cultivator Texas 530 TG My 13 in retail chains. Reliable and mechanism was replaced by an improved model. Collected the product in China. The cultivator is equipped with a TG 500 Power Line engine with a combustion chamber 163 cm 3. In the initial configuration, the width of the processed strip could be installed 30-55 cm, but it was possible to lengthen the cutters up to 85 cm. The depth of loosening is 32 cm. The model has no reverse, single.Speed.

Texas 601 cultivator is the most powerful of the units presented in the review. In the configuration, the TG 650V engine, with a sleeve volume 196 cm 3. With a width of 85 cm, cutters deepen into the soil by 30 cm. The Hero weighs 56 kg. The machine can work with any attachment equipment.

Video review of the cultivator Texas

ATTENTION. If you have a question, then you can ask it in the Комментарии и мнения владельцев to the article below! Our experts will answer your question in the near future (1-2 days), subscribe to the comment to receive a notification about the answer in time!

You can also ask a question on this page, then we will prepare a detailed answer (5-7 days), which will be here!

For six years I have a helping agent in the garden-cultivator Texas, four mills.To be honest, the second time I wouldn’t buy it, I have finished it for six years-at first I put an additional two mills for the best traction-if it doesn’t push it, does not go, burns out.Did not help, and the load on the axis and fastening increased.He took off two mills, and on each mill, where the landing pipe, welded 4 shoulder blades 8×10, turned out16 pusher. Singer has become better, but not much.I think to check small, pointed plates to the ends of each cutter of the cutter (there are on some cultivators)-I do not find a different way out, can anyone tell.¿Happy plowing to everyone.

How to lubricate the chain on the cultivator Texas 532 tg

Texas 532 since 2007. 4 mills, but my plot is a little with a slope to the north, the west and the earth doesn’t grow up the same, but there was such a problem sometimes wanted to bury, from the milling blade from the lion to the right, I changed the problem, set three mills in each direction and everything is fine. Cultivates more broadly and the area is flat.Now I made a device for installing the cigop and I will also make furrows with it for other nozzles. Oil for lubrication of the chain on the right side at the top there is a rubber plug.

532th I have six mills (equipment), two sections, in front of the house and behind it, 4i6 hundred. If without rest, then for. You can plow it with a glimm. Such a problem as burnting is familiar to me, but on four mills, on six it rarely happens. On the extreme milling cutters, the knives are bent inside, I threw two knives from the lion to the right and to the turn, thereby increasing the width of the processing by about 10 cm. Still reduced the momentum of milling.At such turns, worms have no chance of surviving, as you know, it enriches the Earth with humus and oxygen. Earth after cultivation.Not a single pebble. I pulled out a new skip on the engine shaft. Native costs 60mm new 50mm with a diameter. A small adjustment of the clutch cable and ready. The revolutions decreased from 180 to95-100. As for the reviews, I consider the Parmal apparatus I have never let down, it starts with half a turn, there is a hinged. A disk perch, soil.Bearing, this is with your own hands.

Hello, Alexander. I also have MK Texas 532 lili. Once again I am convinced that there are no bad cars, there are appropriate owners. Could you send a drawing of a pulley and what belt was installed after alteration of the pulley?