Differences between Makita hr2470x15 and Makita hr2470

Makita HR2470

Looking for positive and negative reviews of the Makita HR2470?

We collected 32 negative, negative and positive reviews from 11 sources.

Пеоратор Makita HR2470 (отличия от HR2470X15, HR2470FT) SDS-plus, 780W

We will show you all the advantages and disadvantages of the Makita HR2470 revealed by users. We don’t hide anything and post all positive and negative honest customer reviews about Makita HR2470, as well as offer alternative products similar. Is it worth it. The decision is up to you!

Makita HR2470X15

Looking for positive and negative reviews of the Makita HR2470X15?

We collected 13 negative, negative and positive reviews from 11 sources.

We’ll show you all the pros and cons of the Makita HR2470X15 revealed by users’ use. We hide nothing and post all positive and negative honest customer reviews about Makita HR2470X15, as well as offer alternative products similar. Is it worth it. The decision is yours alone!

The letter designation

Makita machines are made in different countries. You can identify it on the nameplate attached to the tool case or body.

If the nameplate has the letter A on it, the tool is made in the USA. The letter D identifies the German manufacturer (Dolmar factories), E indicates that the tool is made in Japan and G in Great Britain.

But there are also Chinese peorators, made in China and designated by the letters Y or ( K but this is often a replica)

The Makita 2450, 2470 are made in Romania and are marked with an R.

The original Makita torch

To be fair, all Chinese rotators are made in Chinese factories owned by European manufacturers. The peorators are made on the same lines, with the same parts and by the same people. The only difference: for the European consumer tools are double checked for quality. First they are inspected in the factory and then they are tested when they arrive in the consumer’s country.

For third countries, including Russia, the machines made in Chinese factories are not even factory tested. But their quality is not diminished, but the price is reduced by almost 23 times. And such a tool is not considered a fake.

If Chinese manufacturers can manufacture Makita peorators under license with high quality, the same can not be said about Makita 2450, 2470 counterfeit tools.

By the way, it is worth mentioning the so-called illegally imported power tools. Most often, illegally imported tools can be identified by the inscriptions on the nameplates attached to the Makita 2450, 2470.

The logos on Makita torches for Russian and Asian customers The logos are made in China where the tool plant is located and made qualitatively under the license

But here is the difference in the nameplates on the body of the original and a fake Makita torch

The decals on fakes and originals

On Makita 2450, 2470 power supply voltage of the tool is indicated by one digit: 230 V. In addition, it is mandatory to apply the HCN mark on the peorators for Russian consumers, which is not present on the nameplates of instruments not designed for Russian consumers. This is a sign that the tool has been certified by Russian authorities.

Makita HR2470 HR2470

Makita HR2470

The tools from the Japanese Makita are in demand among builders around the world because of their right balance of functionality, reliability and affordability. The HR2470 is an excellent helper for DIY enthusiasts, homebuilders and craftsmen working on construction sites.

Ergonomics in 1st place

Horizontal-mounted model looks compact with small footprint of 370x84x214 mm. The tool can be easily operated, making holes in the hardest-to-reach places, rubberized main handle and auxiliary handle provide a secure grip. Depth limiter is fixed on the second place.

What it can do

HR2470 can drill holes without impact in wood (up to 32 mm), metal (up to 13 mm), drill and punch holes in concrete blocks, bricks (up to 24 mm), chisel walls for enlarging doorways, destroying partitions. That said, the chisel has 360º rotation and can be clamped in 40 positions. No hammering at idle speed greatly extends tool life, and the auto speed control improves drilling precision and quality of work.

Safety functions

Safety clutch prevents from injuries in case of tool jamming and protects the torch from breakage. The power button can be locked. To prevent the tool from turning on when it needs to work for a long time without interruption or to protect it from being switched on carelessly.

With a cord length of 2.5 m cord length, so there is not much room for maneuvering without an extension cord. But the set fits comfortably in its original carrying case to protect the tool during storage and transportation.

The Makita HR2470 is first and foremost a Makita. Compact and reliable tool will handle small loads perfectly. On the other hand, there is a reasonable question, whether it is worth spending on household, in general, peorator 150, if you can buy a similar one, but under a different name, for 30. 40% cheaper?

Pros and cons

Based on the characteristics of the tool and user reviews, the following advantages of the Makita HR 2470 FT peorator can be noted:

• Convenient, quick-release chuck.
• The rubberized coating on the gear housing reliably protects against scratches and other damage.
• Convenient switching of operating modes.
• The power cord is long enough.
• Lighted drilling spot.

There are also disadvantages inherent in Chinese models. Some of them are caused by design flaws, others. by a factory defect. Users mostly note the following disadvantages:

• It heats up quickly and smells of plastic.
• Cheap unreliable plug.
• Some chucks are found with a backlash and other flaws. The result is malfunctions and, as always, at the most inopportune moment.

Makita HR2470

In an effort to make our products more accessible to customers, we offer another service, namely, evening delivery of orders. It is carried out exclusively within the Moscow Ring Road from 18.00 to 23.00.

Ordering a product with evening delivery, in contrast to the order with delivery during working hours, is made only in direct communication with our representatives by phone (495) 151-24-00. This service is not unconditional and depends largely on the location of the customer, so in order to avoid misunderstandings we strongly recommend to discuss the details with our manager when placing your order.

We are always glad to see you among our customers!

Why buy from us

• Only Original Product.
• Official guarantee service.
• Over 30,000 items.
• All methods of payment: Cash, cashless, including online payment.

Technical Specifications

Idle stroke frequency, rpm	0-1100	Weight, kg	2,6
Reverse	there is	Impact energy, J	2,7
Max. drilling diameter (steel), mm	13	Max. drill diameter, mm	24
Power, W	780	Shock frequency, beats per minute	0-4500
Number of modes	3	Max. drilling diameter (concrete), mm	24
Max. drilling diameter (wood), mm	32	Dimensions, mm	370х84х214

Produced by

• Japan. home of the brand
• China. country of manufacturer
• Manufacturer information Makita. one of the world’s leading manufacturers of power and petrol tools. Started out in Japan in 1915, today exports to 160 countries. Activity combines centuries-old traditions and modern technology. The tool is distinguished by high reliability and affordable price. The company has 8 plants, including those in Europe. The products have been supplied to Russia since 1935. There are service centers all over the country.

Makita HR2470X15

alt=””” /

Technical characteristics

Idle speed, rpm	0-1100	Weight, kg	2,6
Reverse	there is	Impact energy, J	2,7
Max. drilling diameter (steel), mm	13	Max. bit diameter, mm	24
Power, W	780	Blow frequency, rpm	0-4500
Number of modes	3	Max. drilling diameter (concrete), mm	24
Max. drilling diameter (wood), mm	32	Dimensions, mm	370х84х214

Complete set

• Peorator
• Side handle
• Drilling depth limiter
• Drill set D-00795
• instruction manual
• Case

Manufactured by

• Japan. home of the brand
• China. country of manufacturer
• Manufacturer information Makita. one of the world’s leading manufacturers of power tools and power tools. Manufactured in Japan since 1915, today exports to 160 countries. Activity combines old traditions and modern technology. The tool is distinguished by high reliability and a reasonable price. The company has 8 plants, including those in Europe. Products have been delivered to Russia since 1935. There are service centers all over the country.

The Makita HR2470X20 Peorator

In an effort to make our products more accessible to customers, we offer yet another service, namely evening order delivery. It is carried out only within the Moscow Ring Road from 18.00 to 23.00.

Ordering a product with evening delivery, as opposed to ordering with delivery during working hours, is made only in direct communication with our representatives by phone (495) 151-24-00. This service is not unconditional and depends a lot on the customer’s location, so to avoid misunderstandings we strongly recommend to discuss all the details with our manager when placing the order.

You are always welcome among our clients!

Delivery in 24 hours! By courier. 300 within the Moscow Ring Road Self-delivery is possible, clarify

Why buy from us

• Only Original Product.
• Official warranty service.
• Over 30000 products.
• All methods of payment : Cash, Cashless, including online payment.

Produced by

• Manufactured since 2021
• Japan is a home of the brand
• Manufacturer’s information Makita is one of the world’s leading manufacturers of electric and gasoline power tools. Makita began its way in Japan in 1915, today the company supplies 160 countries. Activity combines centuries-old traditions and modern technology. The machines are reliable and reasonably priced. The company has 8 plants, including in Europe. Delivered to Russia since 1935. Service centers all over the country.

Benefits of a Makita tool

Makita power tools are of high quality and capable of handling the toughest jobs. The company does not only deal in screwdrivers and torches. Their product range includes other devices. But the company is more active than others in manufacturing peorators and screwdrivers: they constantly invent something new and introduce all the latest innovations into their tools, so that the competitors could not come close to their quality level.

• Cost of spare parts is 2-3 times lower than that of competitors.
• Low weight.
• Convenient and comfortable tools.
• All products meet all the requirements of modern consumers.
• Good power.
• Double insulation is present.
• Versatility and convenient functionality.