Dimensions of the cart for a motor-block with their own hands

Basic information

Before carrying out work on the manufacture of the trailer, you need to develop a detailed plan of action and stick to it.

The work plan for making a trailer on a single-axle tractor is as follows:

• At the preparatory stage it is necessary to get acquainted with the device of the mechanism, to analyze its functionality depending on the power of the power tiller.
• Make a sketch of the design. Make your own trailer scheme will greatly simplify the work.
• Calculate the dimensions of the cart for the power tiller.
• Design a drawing of the cart, on which the main assemblies, parameters and dimensions of parts are laid out.
• Plan the principle of operation of the main and additional mechanisms, think through the ways of connecting all the nodes and parts and their functioning.
• Prepare a list of materials and tools.
• Begin assembly and finishing process.

Depending on the ability to transport cargo, trailers are divided into 3 types:

• A simple 1-axle tool for power tillers with load capacity up to 70 kg. Its design is simple and inexpensive.
• A multipurpose cart with a capacity of up to 110-120 kg. Often used in the household.
• Carts for power tillers with carrying capacity over 120 kg. These mechanisms are designed to move heavy loads, so they have a more complex structure, respectively, increasing the cost of materials for the frame and cladding. The functionality of such equipment expands.

Based on these parameters, choose the strength material for the frame and finish of the mechanism.

Engine Building. Engine Lifting, Moving and Storage Cradles

What trailer for the tiller in 2020?

In order to accurately answer the question of which adapter is best suited for a power tiller, you should have an idea of what they are in general. Adapters are classified according to several principles, which can be understood from the table:

Classification	Type	Description
By position	Front	Front clutch, handlebar is a must
	Rear	Hitch on the back of a power tiller
By scope of use	Shortened	Most often used for light power tillers
	Extended	For heavy industrial equipment
By bodywork	Body	Suitable for large plots, where you have to perform many tasks every day, transportation of crops
	Bodyless	To be connected to the power tiller

The design of the cart for the power tiller

The simplest version of the trailer, a cart for a power tiller is a monolithic block that is placed on the grid frame. To make it, you need cross beams, longitudinal members made of pipes. To the tubes, located along the structure, 4 stands are attached.

And already to them (to their upper block) is welded strapping made of angle. If the trailer needs to be equipped with hinged sides, the frame must be made separately from the supporting frame. The platform grid is best covered with a duralumin sheet and fixed with bolts.

For the construction of the curbs use thin sheets of metal, fixing them with welding.

Depending on what will be the size of the cart for power tillers, you can make several versions of the beam, to which the axle with the wheels is attached. For a large trailer only a prefabricated one, consisting of two channels joined together and welded together, is suitable.

For a small cart, a small size, you can do with a square profile. Such a device will allow you to perform the simplest functions of transporting goods and passengers. Spring-mounted wagon for power tillers photos illustrate their prevalence and popularity.

Due to the fact that they are very easy to make and repair, and folding sides make loading and unloading easier, these carts are widely used in all farms where almost any single-axle tractor is available, whether it is Luch, Tarpan, Mole, Zubr, Niva, Salut, Lifan 6.5, Husqvarna, Carver or any other.

details about the cart for the power tiller you can see on the picture below

Preparatory work

First of all you should think about what size trailer should be to fit a tractor unit and make it easy to use. After that you will need to sketch a drawing or a sketch of the cart, which will display the design from different angles, set all the dimensions and draw the nodes.

Trailer mechanisms

It is necessary to think through all the details, so that during the assembly of the equipment did not have any difficulties. For this it is necessary to understand:

• Screwing, riveting or welding will be connected nondisassembled units and parts;
• how the axles, bearings, bushings, and hinges will connect;
• What seat is better to set (simple or rotating);
• What to make a parking leg support from;
• whether you need a tipping body, to which you will have to add a mechanical tipper or a self-dumping unit with a special handle;
• What connection unit to pick up on the power tiller (on bearings, bushings or articulated).

Having sorted out all these questions, you can begin to prepare a list of necessary materials and calculate the approximate cost of the future trailer.

Drawing of bogie for power tiller

Let’s consider the easiest and fastest way to make a small cart that can carry no more than half a ton of cargo. A suggested drawing looks like this.

• 1. brackets for attaching additional devices to the machine;
• 2. place for the console;
• 3. driver;
• 4. device for a comfortable position of the foot, made of a board, 20 millimeters wide;
• 5. the driver’s seat. Wood of the same thickness is used in the production;
• 6. main frame for attaching to the tiller;
• 7. the wooden body itself;
• 8. the presence of the support beam is determined;
• 9. wheels.

Important! Such diagrams try to make as accurate as possible, drawing from different sides and positions. Particular attention is paid to the joints and seams of the future equipment. We must Honor every detail, including possible problems in the manufacture.

In this video we will consider a single-axle tractor with a cart: