DIY tiller chain creeper

Equipment for working with potatoes

• Potato planter. Those who planted potatoes by hand probably dreamed of automating their work. With the help of a tiller and special equipment (potato planter), such an opportunity arose. The equipment is equipped with a plow that creates a furrow for planting potato tubers. A special container with potatoes is fixed on the frame, from which, after an equal period of time, the tubers fall into the furrow. The frame is equipped with hillers, which immediately fill the planted potatoes.
• Potato digger. Digging up potatoes by hand is also not an easy task. A technician equipped with equipment for collecting tubers (potato diggers) comes to the rescue. They look different (fan, vibration, conveyor), but the principle of action is the same for all: sharp pins pierce the ground and pull the bush out along with the roots, after which it remains only to collect them. There is equipment along with bunkers where potatoes extracted from the soil are poured. Harvesting like this is even more convenient.

3pt Tiller conversion on the cheap

Trencher

This type of attachment turns the tiller into a miniature excavator. It is quite maneuverable and can be used in non-standard situations, in areas between buildings and trees. Trenchers are made on the basis of wheels or tracks, they are equipped with various types of equipment (knives, dumps, cutters) and are capable of producing trenches up to two meters deep. They are used for different purposes: digging ditches, when building a foundation, planting trees, for arranging a drainage system.

Trenchers are able to traverse frozen ground as well as unstable soils, leaving behind neat compacted ditch walls.

Tiller attachments

In order to cultivate the land and perform a number of agricultural work on a small tractor, you will need the following additional devices:

• Rake.
• Plows.
• Hillers.
• Potato planters and potato diggers.
• Harrows.
• Weeders and mowers.
• Wood splitters.
• Sprayers.
• Rotary tillers.

All these devices will sooner or later be needed, but most often they are used, a rake, a plow, tillers and devices for planting and collecting potatoes.

Attachments for tillers what kind of video happens

tillers, attachments for tillers are widely used in personal subsidiary plots. A large farm can be equipped with the necessary set of specialized equipment.

DIY accessories for a tiller. photos and drawings

• Using the coupling device, we connect the potato digger with the tiller. Through the belt, there is a transmission of torque from the engine to the potato digger
• lawn mower for mowing potato tops with a device for lifting the foliage lying between the rows

The initial stage of assembling the construction of a potato digger with setting the angle of attack of the share and the depth of digging

From a watering hose (sleeves with a thread amplifier), metal bushings, bolts, washers and nuts, we assemble silent blocks to connect moving parts together

5 and 6. All parts of the potato digger are made and painted. You can start assembling

Potato digger drawing

The frame with dimensions is in blue, the moving rods with dimensions are in red, the share with rods and support wheels are in black, the shaft is gray on bearings with a pulley

Do-it-yourself attachments for a tiller

Today’s peasants cannot imagine their activities without special equipment. Most assemble attachments for the tiller with their own hands, since this machine goes on sale with a minimum set of additional tools for cultivating the land.

For summer residents and residents of rural areas, where it is required to cultivate sufficiently large areas of land, this technique is a real savior, allowing you to perform the intended work quickly, efficiently and without heavy physical effort. Only now the tiller itself is of value as a tractor; to perform various land works, you need to purchase or make do-it-yourself attachments.

Rotary mower

This type of attachment allows you to mow vegetation of different levels of height and thickness, while freeing the farmer from heavy routine work. Due to the design features of the mower, it is often called disc, and according to the method of connection with the tiller, it is divided into trailed and mounted. The cutting knives on the mower can be located in front, behind or on the side of the tiller, in any case they are fixed on a frame with a support wheel, as soon as it starts to move, the discs begin to mow vegetation. In addition to the rotary, there is a segment mower. It seems complicated, like a hair clipper. Her work is more skilled and used for large areas.

How to make a hiller?

The simplest homemade attachment is a hiller. To assemble this device, you will need the following tools and materials:

• 2 disks of the same size, made of durable metal. They can be made independently, or taken from an old seeder.
• Bolts, nuts, metal axles and washers, plain bearings.
• T-shaped metal frame.
• Racks. 2 pcs.
• To correctly adjust the angle of rotation of the discs, you must purchase screw lanyards.

Adapters are located in the center of the discs, with their help, they are attached to the frame. Racks should ideally be mounted on such devices so that the distance between the discs can be adjusted in the future. The rest of the parts are assembled by welding and bolts.

DIY Pull Behind Garden Tiller

Do-it-yourself creeper for a tiller: step-by-step instructions, principle of operation, tips

Small-scale mechanization in modern agriculture is an indispensable thing for most processes. A self-made creeper for a tiller makes it possible to optimize the cultivation and hilling of a personal plot or farm plots. The step-down block serves as a power converter of the units, saving the resource of the device and the costs of its operation.

How to make a creeper for a tiller with your own hands?

At the first stage of manufacturing the mechanism under consideration, it is necessary to determine the type of transmission, working number, center distance between the drive shafts and the wheels themselves.

A do-it-yourself chain creeper for a tiller can be made according to the following scheme:

• The main part is the body. He is responsible for the quality of the entire device. In addition, the relative position of the axes to each other and the correspondence of the bearing seats are taken into account. As a rule, the skeleton is made of sheet steel by welding. In this case, one of the walls is made removable, which facilitates maintenance of the mechanism.
• The system of a self-designed creeper for a tiller includes a high-speed (input) shaft, a worm gear system or an analogue of sprockets.
• Driving wheels always have more teeth than driven gears. Couplings, bearings, keys and fasteners act as auxiliary parts.

For the independent construction of the specified device, you will need the following materials and tools:

Purpose

A self-built creeper for a tiller allows you to process “fat” soil, virgin soil and other types of soils. At the same time, the depth of loosening, transportation of goods, the possibility of using attachments remains at the proper level.

With a decrease in engine speed and a decrease in speed, the power of the unit is lost, which to some extent slows down the working process as a whole. In this case, a simple creeper for the tiller just helps. It is quite simple to make it with your own hands, having basic locksmith skills. These elements make it possible, without losing the power and speed indicators of the engine components, to obtain the required control over the land cultivation process. In some cases, the power of the cultivator even increases. Having some experience and knowledge, it is easy for the user to re-equip the finished device or create it on his own.

Features of the

Small-scale mechanization in agriculture is very popular. tillers and cultivators are more often purchased for private farms. They allow you to carry out all the work on the processing of fields without significant costs for maintenance and operation of equipment.

Combined with the appropriate attachments, the Tillers are the best option for soil cultivation. The demand for these machines is due to the fact that they quickly and economically perform the assigned tasks, in contrast to bulky and outdated combines and tractors.

Design and maintenance

To make a creeper for a tiller with your own hands, you need to understand the location and principle of operation of the structural mechanisms. In addition, you should study the rules for the maintenance, operation and storage of devices. The elements in question have both pros and cons.

A self-made creeper for a tiller often consists of one or a pair of stages, depending on the number of gears. The advantages of mechanisms include:

• reliability;
• long service life;
• small overall dimensions;
• possibility of equipping mechanisms with reverse.

The disadvantages of devices include poor maintainability and high cost. In case of failure, the part needs to be replaced as a whole, which is not so cheap. The sufficient oil level should also be monitored. Lack of lubrication leads to increased wear on the unit.

DIY creeper for tiller “Neva

On this unit, craftsmen put a device that combines gear, chain and worm gear. This feature is due to the fact that the distance between the clutch axes depends on the working module and the number of teeth. In a chain drive, the distance is adjusted by adding or subtracting links.

When designing a tiller, developers do not always take into account the optimal location and interaction of all coupled units. It is often required to incorporate intermediate parts, such as a transfer element, into the design. This option is quite within the power of the chain drive, which compensates for the distance when traction is transformed from the gears or “worm” to the wheel shaft.

Worm gear

Here, the main element is a worm-type transmission. In this case, it is possible to reduce the dimensions of the cultivator and increase the weight distribution. The latter figure is improved due to the perpendicular arrangement of the drive of the wheels and shafts.

What Are The Advantages Of Worm Gear Reducer?

• Large gear ratio.
• Small size.
• Light weight.

The disadvantages of the worm assembly include the lack of reverse and the need to completely replace the element when its main parts fail.

How to make a creeper for a tiller with your own hands?

At the first stage of manufacturing the mechanism under consideration, it is necessary to determine the type of transmission, working number, center distance between the drive shafts and the wheels themselves.

A do-it-yourself chain creeper for a tiller can be made according to the following scheme:

The main part is the body. He is responsible for the quality of the entire device. In addition, the relative position of the axes to each other and the correspondence of the bearing seats are taken into account. As a rule, the skeleton is made of sheet steel by welding. In this case, one of the walls is made removable, which facilitates maintenance of the mechanism.

The system of a self-designed creeper for a tiller includes a high-speed (input) shaft, a worm gear system or an analogue of sprockets.

Driving wheels always have more teeth than driven gears. Couplings, bearings, keys and fasteners act as auxiliary parts.

For the independent construction of the specified device, you will need the following materials and tools:

• “Angle Grinder”;
• welding machine;
• drill or screwdriver;
• appropriate drills and files;
• tape measure, caliper;
• hammer;
• sheet metal 5 millimeters thick;
• pieces of pipes with a diameter suitable for inserting bearings into the interior.

Do-it-yourself creeper for a tiller: step-by-step instructions, principle of operation, tips

Small-scale mechanization in modern agriculture is an indispensable thing for most processes. A self-made creeper for a tiller makes it possible to optimize the cultivation and hilling of a personal plot or farm plots. The step-down block serves as a power converter of the units, saving the resource of the device and the costs of its operation.

Design and maintenance

To make a creeper for a tiller with your own hands, you need to understand the location and principle of operation of the structural mechanisms. In addition, you should study the rules for the maintenance, operation and storage of devices. The elements in question have both pros and cons.

A self-made creeper for a tiller often consists of one or a pair of stages, depending on the number of gears. The advantages of mechanisms include:

• reliability;
• long service life;
• small overall dimensions;
• possibility of equipping mechanisms with reverse.

The disadvantages of devices include poor maintainability and high cost. In case of failure, the part needs to be replaced as a whole, which is not so cheap. The sufficient oil level should also be monitored. Lack of lubrication leads to increased wear on the unit.

DIY creeper for tiller “Neva

On this unit, craftsmen put a device that combines gear, chain and worm gear. This feature is due to the fact that the distance between the clutch axes depends on the working module and the number of teeth. In a chain drive, the distance is adjusted by adding or subtracting links.

When designing a tiller, developers do not always take into account the optimal location and interaction of all coupled units. It is often required to incorporate intermediate parts, such as a transfer element, into the design. This option is quite within the power of the chain drive, which compensates for the distance when traction is transformed from the gears or “worm” to the wheel shaft.

Purpose

A self-built creeper for a tiller allows you to process “fat” soil, virgin soil and other types of soils. At the same time, the depth of loosening, transportation of goods, the possibility of using attachments remains at the proper level.

With a decrease in engine speed and a decrease in speed, the power of the unit is lost, which to some extent slows down the working process as a whole. In this case, a simple creeper for the tiller just helps. It is quite simple to make it with your own hands, having basic locksmith skills. These elements make it possible, without losing the power and speed indicators of the engine components, to obtain the required control over the land cultivation process. In some cases, the power of the cultivator even increases. Having some experience and knowledge, it is easy for the user to re-equip the finished device or create it on his own.

Cultivator Repair. Replacing the Transmission (Powermate Part # A200759)

First of all, the stars of the input shaft are mounted. If the structure is massive, the flange or keyway is fixed by means of spot welding. At the next stage, the method of fastening the driven shaft and a pair of half axles is chosen.

When mounting, take into account the possibility of displacement of the star in one of two directions. The body part is made independently or with the help of specialists. If the first option is selected, consider the characteristics of the glands, the corresponding seals and bearings.

Features of the

Small-scale mechanization in agriculture is very popular. tillers and cultivators are more often purchased for private farms. They allow you to carry out all the work on the processing of fields without significant costs for maintenance and operation of equipment.

Combined with the appropriate attachments, the Tillers are the best option for soil cultivation. The demand for these machines is due to the fact that they quickly and economically perform the assigned tasks, in contrast to bulky and outdated combines and tractors.