Do -it -yourself electrogaikovert from an electric screwdriver with its. Professional or household tool?

DIRECTED ELECTRICHP

After assembling the frame of the veranda and installation of the rafters, I realized that the percussion tool is very convenient in frame housing construction

I used to work only with a screwdriver. Now there was an opportunity to purchase a stressed gayword. After testing, I was convinced that Gaykowert, along with nozzles, facilitates work with large fasteners. I bought a network option, but there are models on the batteries-they have the same principle and the same only difference in price.

To work with the Gaikovert, you need to buy a set of adapters, otherwise you can work only with hexagonal fasteners

⇒ You can discuss the record in or on

There are Комментарии и мнения владельцев and suggestions? Write / Call ⇒ My contacts

Need help in building a frame house? See ⇒ My services

Tags: #Electric screwdriver #Gaykowert #shock #tree #Overview #Chemo Comparison #screwdriver #shock shurvuruvertgavert #What is the best.sorceressiliga.virtue #Electric tool

quote: Originally posted by alexei2011June:

How to work with a gaykwernet so as not to pull the screw? You can control the tightening force? Can they collect furniture?

I use a set of Shurik and the shock “Gaykowert” Milvoki 18 volts of lithium, satisfied with the devils, Makita sucks in a puff by both at the performance and at a price (Shurik Makita was worth a set of Milvoki in the suitcase and still visited the repair twice). Drummer with a “cartridge” under the bit, t.e. In the end hole 6 is faced. Surely just pulls any screw, twisted without sparkling and 1506 with a cross under a position N 3. Small pressing the button gives a small speed, no adjustments, with increasing tightness force, finishes the moment, when twisting to the stop, he is stopped without gaps. Twisted hundreds of screws, the head of the head was a couple of times. Rarakada for the full. 30 minutes, the charge indicator in the battery is. Sucks the battery of leisure, without falling power.

Forget the furniture with such a drummer, scroll through and through. For the furniture, I took the Makitovo electrical office, consists of a direct state to the image of the figurative, took the blue “proff”, while the battleships are 7 volts quickly, in half an hour of work but the replaced also loads for half an hour maximum.

I put the batteries at 7 volts quickly, for half an hour of work but the replaced also loads for half an hour maximum.

Small announcement: Skil starts the release of a new network two.speed model of a drill/electric screwdriver. 6222 Energy. which will go on sale in September 2009. If not for the 6-meter power cord (220 V), then it is very difficult to distinguish from the battery analogue. The model is planned for delivery of several dozen European camps, including AMP. Rotation frequency (idle): smooth adjustment in two ranges-0-300 and 0-850 O./min. Diameter of wrapped screws (max.): 6 mm. The cartridge is fast-sounding, diameter 1.0-10 mm. Diameter of drilling (Max.): in steel. up to 8 mm, in a tree. 10 mm. 19 steps for adjusting torque drilling mode. Reverse. Weight: 1.2 kg. https: // www.Holodilnik.ru/domestic/drills_and_screwdrivers/skil/62222ab/

If not for the 6-meter power cord (220 V), t

All cord “manual” in the furnace, really cords are chewed, I carry a lot in a loincloth or for a hook on a work belt. With larger units, of course, another layout.

If at work, then I agree to some extent, but for the house once a year to unscrew to tighten the drill is indispensable.

It depends on which house and at what stage of decoration/construction, Shurupov wrapped more than a dozen thousand. I have only door leafs under 30 pieces, tomorrow I will put permanent doors, 6 and 7 in account.

The difference between the Gaykowert and the electric screwdriver

Electric electric screwdriver covers a large range of work. It is used both for twisting (screws, screws, screws), and for drilling low density materials. The instrument has a speed controller and can be equipped with various types of cartridges (fast.packed or fist). Suitable for home and production work.

Things are different with Gaikovert. This tool is widely used in production for quick and high.quality fastening of parts, but more and more often begins to appear in home amateur home sets. Can have a hexagonal cartridge or square with a friction ring. The most effective are shock gayworts, although the models of the pulsed type are very common. The main thing is how the Gaikovert differs from the electric screwdriver is the increased power of the first. Gaikovert can tighten screws, but requires a fair dexterity for this, since, with excess effort, he can tear the hats or make the fasteners deep into the boards. The main domestic use of a gaykorte is to unscrew the car wheels and fasten the overall threaded structures. For this case, it is ideal.

The next difference is the cartridge. Unlike the clamping mechanism of an electrical screwdriver, to use drill or bits on a gaykovert, adapters will be required.

A few words about the Gaykowert

The industrial or homemade gaykoVERT serves to install and remove bolts and nuts. Some can accidentally confuse it with a drill, but experienced masters will immediately indicate a special nozzle in a holder, which does not have a conventional drill. It will definitely not be without it, if you need to unscrew the old nut, which rusted so much that it simply cannot be twisted with my hands or key. The tool is available in the following performance:

Gaikovert is widely used in repair shops and in various assembly works. powerful tools are used in mechanical engineering.

What is the difference in tools

Gaikovert is considered to be a tool for professionals, while an electric screwdriver is mainly used for smaller household works. The main differences of the Gaikorte from the electric screwdriver are their following characteristics.

• Gaikovert compared to electric screwdriver is more thundering and does not have a cartridge. He has a special rod at the end, on which the warden head is attached.
• The power of the gaycorte attached to the object is many times superior to the power of an electric screwdriver. With the help of the first, you can solve any “problems”.
• A significant difference in the weight and size of these mechanisms. Gaykowerts are usually larger and harder.
• Screwdrivers have several operating modes that can be adjusted. Unlike them, no other special tools have this opportunity.

Thus, gaykortes are used more often for heavy mechanical work, while its competitor is more often used for simpler domestic repair. In addition, for simple tasks, you can try to make a gaykowert yourself with the help of ordinary nozzles.

Which tool is better to choose? The answer to this question will depend on the type of work where these tools will be needed. Given the fact that Gaykowert during work has a tangential blow, it cannot be used to tighten the screws, since he will simply tear off their hats. However, if we ensure the lack of an emphasis, then it can make a mount that it cannot be created even by the most powerful screwdriver. If there is a small amount of work, which includes only screwing screws, then there is enough ordinary electric screwdriver for this. Therefore, it is necessary to decide what to choose for work is an electric screwdriver or a gaykort is necessary based on specific circumstances.

Device and purpose

Electric screwdriver is used for various construction and repair work, but its main function is rapid screwing and twisting fasteners: screws, screws, bolts, screws.

It helps to cope with a large volume of tasks for significantly less time than when using a screwdriver.

Budget screwdrivers of small and medium power are used in the assembly, installation and dismantling of furniture, equipment, the construction of frame structures (partitions, walls, suspended ceilings) and other objects. A powerful tool with the shock mechanism copes with the drilling of holes.

In addition to standard operations listed in the instructions for a screwdriver, it can also be used for other tasks. With the help of a mixer nozzle, sparse solutions are kneaded. Through a special adapter, the device is connected to the ice discovery to quickly make the holes.

The case of most screwdrivers is made of plastic. thanks to this, the total weight of the tool decreases. Inside the case are placed:

• engine. Depending on the type of device, it can be electric or pneumatic. The former work from the network or battery, the latter. from the tank with compressed air or compressor.
• Gearbox. A geover mechanism that transfers rotational movements from the engine to the spindle.
• Clus-regulator. Connected to the gearbox, with its help, adjusting the depth of screwing and the rotating moment.
• Start capacitor. He launches the engine.
• Chuck. Bits, drills, end heads are inserted into it. The most common fast-and-packed three- or four-cup.
• Power supply (battery) and/or network cord.

On the case there is a control panel with a power button, a speed switch. Reverses are used to work in the unstable mode. Additionally, an electric screwdriver may have a backlight, fuse.

The difference between the Gaykowert and the electric screwdriver

Electric electric screwdriver covers a large range of work. It is used both for twisting (screws, screws, screws), and for drilling low density materials. The instrument has a speed controller and can be equipped with various types of cartridges (fast.packed or fist). Suitable for home and production work.

Things are different with Gaikovert. This tool is widely used in production for quick and high.quality fastening of parts, but more and more often begins to appear in home amateur home sets. Can have a hexagonal cartridge or square with a friction ring. The most effective are shock gayworts, although the models of the pulsed type are very common. The main thing is how the Gaikovert differs from the electric screwdriver is the increased power of the first. Gaikovert can tighten screws, but requires a fair dexterity for this, since, with excess effort, he can tear the hats or make the fasteners deep into the boards. The main domestic use of a gaykorte is to unscrew the car wheels and fasten the overall threaded structures. For this case, it is ideal.

Repair of a pneumatic gaykoVERT

After taking out all the details, the first thing we have to do is evaluate their appearance. Details must be lubricated, without rust and oxidation. Next, we must view the mechanism for chips. If the details are damaged, they must be replaced. You can read the name of the details of the pneumatic gayworm on the image above. If your instrument for many years and before a malfunction has not been used for a long time, then perhaps the cause of the breakdown is cut in banal corrosion and rust, formed on the mechanism over a long time of the inaction of the tool. The solution to this problem may be elementary cleaning of parts with subsequent grease. Even if this method does not return the performance to your tool in order to work in the future, it should not be dirty and without lubrication.

The tool may not function or work incorrectly even with a clean, lubricated mechanism. In this case, the cause of the malfunction lies clearly in the breakdown or wear of a certain part. Here you should carefully examine each complete set for chips, cracks or scuffs. Close attention should be paid to the bearings and blades of the rotor, since these parts are most prone to mechanical damage.

You should also carefully examine the cylinder block and make sure that the rotor blades fit tightly to its walls. This happens when the Gaikovert works for a long time without oil, as a result of which the power of rotation falls significantly. If there is a clear backlash, you have 2 options for repairing a pneumatic ovation: installing a new block or grinding of an old. Grinding is required to be carried out on the machine for a perfectly flat surface.

There are many types of breakdowns, but all of them are decided by the identification and replacement of a faulty part. Therefore, in order to repair your gaykort, it should be disassembled, evaluated by the state of the mechanism, find a broken part and replace it. Replaceable details can usually be purchased in specialized workshops. They cost much cheaper than a new gaykowert and you can install them yourself. New spare parts will work for more than one year, you need to only lubricate them and clean them in a timely manner.

How to make a gaykowert from an electric screwdriver

For various reasons, in household matters, you may need to unscrew a couple of dozen nuts. Buying for such a fleeting need Gaikovert is quite a little expensive, but I don’t want to twist manually when there is an old, like electric screwdriver at the disposal. He performs the main rotational function, it remains to remake it under the spinning of the nuts. Everything is extremely simple here. To make a gaykowert from an electric screwdriver, you will need a special adapter for bats and nozzles themselves, the size of your nuts. Adapters are in the region of 300 and are sold in most building stores. When all the components are at hand, clamp the adapter shank in the cartridge, put on the right nozzle and use a home.made Gaikover from an electric screwdriver. Due to the small capacities of an electric screwdriver, weaken and tighten the nuts, but the time for promotion will be reduced ten times. Of course, you can go further, climb into the electronic components of the tool and increase the power of rotation. We do not recommend engaging in such manipulations, as they are likely to lead to a breakdown of your tool. Do not neglect the recommendations of the manufacturer. Save this page in your social. network and return to her at a convenient time.

The choice of tools is not an easy task. We need to fit into the budget, choose a good copy in characteristics and not make a mistake in choosing a manufacturer. In this article we’ll talk about how to choose an electric screwdriver, what are they, which is better.

The first thing you need to decide when choosing an electric screwdriver is a household tool or professional. The difference between them is significant. The working resource is primarily different. Professional models are made of more durable and expensive materials. They can serve for several years even with constant use in production. Household models serve many times less, but also many times less cost.

You need to choose a class of electrical screwdriver. household or professional

If you need an electric screwdriver “to have”. for various household work in the house or cottage, an inexpensive household model is quite enough. They usually have an annual guarantee, but can serve for quite some time. If a serious repair is planned or construction begins, there will be more than enough work for an electric screwdriver. Then a professional or semi.professional model will come in handy. But some owners decide that it is better to purchase two household tools than one professional. In general, how to choose an electric screwdriver on this parameter to decide.

What is the difference in tools

Gaikovert is considered to be a tool for professionals, while an electric screwdriver is mainly used for smaller household works. The main differences of the Gaikorte from the electric screwdriver are their following characteristics.

• Gaikovert compared to electric screwdriver is more thundering and does not have a cartridge. He has a special rod at the end, on which the warden head is attached.
• The power of the gaycorte attached to the object is many times superior to the power of an electric screwdriver. With the help of the first, you can solve any “problems”.
• A significant difference in the weight and size of these mechanisms. Gaykowerts are usually larger and harder.
• Screwdrivers have several operating modes that can be adjusted. Unlike them, no other special tools have this opportunity.

Thus, gaykortes are used more often for heavy mechanical work, while its competitor is more often used for simpler domestic repair. In addition, for simple tasks, you can try to make a gaykowert yourself with the help of ordinary nozzles.

Which tool is better to choose? The answer to this question will depend on the type of work where these tools will be needed. Given the fact that Gaykowert during work has a tangential blow, it cannot be used to tighten the screws, since he will simply tear off their hats.

However, if we ensure the lack of an emphasis, then it can make a mount that it cannot be created even by the most powerful screwdriver. If there is a small amount of work, which includes only screwing screws, then there is enough ordinary electric screwdriver for this.

Therefore, it is necessary to decide what to choose for work is an electric screwdriver or a gaykort is necessary based on specific circumstances.

Read more: TOP 10 fashionable women’s watches 2019-2020: Rating of the best reviews of the owners

How to turn a drill into a stressed gaykwern

Very often, with self-repair of a car or assembly of any structures, the use of a gaykover is required. The factory manufacturing tool is quite expensive, but for a skilled master it will not be difficult to make it from an electric screwdriver, an old manual or electric drill. However, homemade tools will not have a power sufficient for unscrewing or tightening the bolts and nuts of large diameter. Their destinies will work with the fastener of a small diameter.

The shock gaykowert belongs to the category of special tools. Its ability to unscrew tightly wrapped or bitten bolts and nuts is based on the principle of lateral, or expressed by the technical language of a tangential blow. That is, the tool unscrews the nut through a short.term blow directed along the axis of its rotation. The power of the electric screwdriver is achieved only due to torque, so it does not fit the role of an impact instrument.

Some electric drills and all modirators are equipped with a shock mechanism, but the principle of its action is based on a direct blow. That is, the impact force acts along the axis of rotation of the bolt. Such a mechanism is absolutely useless for unscrewing bolts or nuts, as it is designed to break through concrete.

Well, and the most important difference between a real shock gaykowert from a drill and an electric screwdriver is an internal device. All the details of the Gaykowert are designed for a very high mechanical load and are made from high.strength materials. This explains the significant difference between its value and domestic tools.

In ordinary droplets, most parts are made of plastic and their strength is simply not designed to twist the nuts. From this we can conclude that it will not work to redo the drill into the shock gaykwern.

To turn an electric drill or battery electric screwdriver into a tool for unscrewing small bolts and nuts with a diameter of 8-12 mm, you can go to the store and purchase appropriate nozzles for this-adapters. One side is made in size of a standard bit and is clamped in a drill cartridge. The other side is designed to install the head to unscrew the bolts.

DIY crafts for motorists

In this article, I will tell you several ways that will make life easier for a motorist using an ordinary peorator, which can be easily done with it.

It would seem that this tool is only for construction, but do not forget in which country we live and we do not have narrow.minded tools, therefore the peorator is not an exception.

To begin with, we need any broken drill from a penetrator,

We cut off the drill of the corner grinding of it from it so that only the part remains in the Bour itself. Next, take any bolt from the wheel and weld it to the cut off the drill, as in the photo.

That’s all, now we insert our workpiece into the peorator and use in different situations.

For example, when we need to remove the tips of the steering rods or ball, into the place of the skirt itself, where the ball or tip is inserted, we rest and turn on the peorator, the tip itself will jump out without difficulty.

Such a thing can also be used as a shock screwdriver, it copes perfectly with this.

Also, this device is good to use when extinguishing and pressing bearings, it turns out quickly and easily.

And for those who are going to disassemble the generator, I advise you to divide it into 2 parts using a pea, very easy and convenient.

There is still a way to unscrew the bitten bolt, you just need to bring the peorator, put it on the bolt and turn it on for a short time, in this way the rusted faces are beaten off and the bitten bolt will be unscrewed.

This method or such a peorator will facilitate the life of any motorist in the garage, just do not forget to put it on a shock hammer without rotation.

Well, if you charge a shock screwdriver into the peoporator, then this method will help unscrew the boiled nut,

that is, do not unscrew it, but simply cut it in two.

The peoporator in this design will help unscrew the jammed nut on the corner grinder.

I have listed only a few ways to apply the pedorator in garage conditions, and I feel such ideas that there are a lot if it’s not difficult, share in the Комментарии и мнения владельцев, let others learn about them, because this will help someone. Thanks.

Do.it.yourself ice ax

The fishermen were able to improve the icebow, connecting an electric screwdriver to it. They just realized what the waste of precious time is worth, especially in winter.

For manufacture, you must have:

As a rule, the optimal size of the hole is about 10 cm.

Characteristics of an electric screwdriver for ice discovery

Ice Bour is a tool that is able to facilitate the conditions of winter fishing and make it more comfortable. In order for the drilling of holes without problems, it is necessary to choose the corresponding electric screwdriver and, accordingly, the battery.

Tool characteristics

The difference between the Gaykowert and the electric screwdriver

Electric electric screwdriver covers a large range of work. It is used both for twisting (screws, screws, screws), and for drilling low density materials. The instrument has a speed controller and can be equipped with various types of cartridges (fast.packed or fist). Suitable for home and production work.

Things are different with Gaikovert. This tool is widely used in production for quick and high.quality fastening of parts, but more and more often begins to appear in home amateur home sets. Can have a hexagonal cartridge or square with a friction ring. The most effective are shock gayworts, although the models of the pulsed type are very common. The main thing is how the Gaikovert differs from the electric screwdriver is the increased power of the first. Gaikovert can tighten screws, but requires a fair dexterity for this, since, with excess effort, he can tear the hats or make the fasteners deep into the boards. The main domestic use of a gaykorte is to unscrew the car wheels and fasten the overall threaded structures. For this case, it is ideal.

The next difference is the cartridge. Unlike the clamping mechanism of an electrical screwdriver, to use drill or bits on a gaykovert, adapters will be required.

The pros and cons of Gaikovert

The weighty advantage of the GaikoVERT is its ability to tighten the fasteners with increased strength and promote rusted compounds. This tool becomes an excellent assistant when working with large equipment. Unfortunately, the increased power of the tool makes his work more noisy. If an electric screwdriver can be worked out quietly after the end, then the Gaikrovert will quickly make itself felt. To twist the small elements with a gaykover, you need to have a certain dexterity, otherwise there is a great risk of damage to the material. With electric screwdriver in this regard, everything is much more convenient, although longer. The configured ratchet mechanism will not allow you to twist the self.tapping screw, installing its hat exactly on the surface of the material.

Summing up, we can say that the Gaikovert is a powerful and noisy tool designed to twist large fasteners. For household needs, it is suitable, but not everyone needs. Electric screwdriver works at a lower speed. At the same time, it is very easy to use and does not require special skills and adapters.

Gaykowert needs those who know exactly where they will use it. Electric screwdriver is suitable for most household works.

Tool care rules

Electric screwdriver needs minimal care. In order for the tool to work properly, you need to adhere to the recommendations specified by the manufacturer, do not use it for tasks that are not indicated in the technical passport, do not overload it too often. Periodically the inside of the cartridge and rotating parts must be lubricated with machine oil.

The tool should be stored in a dry place, away from sources of heat, damp and sunlight. After each use, the case is wiped with a clean dry rag to remove construction dust from it. If drops of the construction mortar have fallen on an electric screwdriver, you can clean it with a well.squeezed soap rag.

Read also: Procedure for installing an electric meter in the apartment

If we comply with the operating rules, do not use the tool for tasks exceeding its capabilities, you can greatly simplify the repair and construction work. So that the electric screwdriver does not work for a long time and fail at the wrong time, it is necessary to take care of it in a timely manner, monitor the condition of the parts and recharge before use.

Nowadays, there are many tools for twisting fasteners, and one of the most popular representatives of this class is an electric screwdriver. Almost any housework will be easier if your arsenal has this wonderful assistant. But despite all its versatility, an electric screwdriver has a very similar competitor. Gaykowert has a narrower focus, but for certain work it is much better. Let’s figure out how these tools are different and how you can make a gaykowert from an electric screwdriver with your own hands.

Recommendations for self.assembly of electric scooter

On the question of how to make an electric chapter for adults with your own hands, there are many nuances. So, the size of the motor-wheel is selected depending on the width of the dropouts. Particular attention should be paid to the choice of a battery, because the weight, the ease of control and the range of electrical circuit run on one charge depends on it. Modern electric scooters are equipped with lithium battery-assemblies from lithium-ion elements, batteries like Lipo or Lifepo4. Li-and-ion batteries are easier and cheaper, and Lifepo4-they serve longer and are not afraid of frost.

Homemade electric steamfish is a good alternative to an expensive device that can be bought in specialized stores. To save money and not reduce quality, it is necessary to correctly perform all the above actions. Among them:

• Disassemble a broken electric drill with a running engine.
• Similarly come with a non.working corner grinder, leaving only an angular gearbox and an axis with a rotor.
• After that, take an overall coupling and install it at the location of the disk of the gearbox of the corner grinder.
• Then the part is connected to the engine removed.
• At the next stage of operation, the wheel of a conventional self.scatter is welded to the axis from the corner grinder.
• The bearing is securely fixed to prevent its rotation during operation.
• The axis of the engine gearbox is connected to the overall coupling.
• The lithium battery is securely attached to the scooter frame.
• The engine control button is brought to the control handle.
• 4 wires are allowed from the regulator, the first pair of which goes to the power element, and the second to the electric motor.
• All contacts are closed with insulation.
• The frame of a homemade electric scooter is painted and left for several hours to dry out the applied composition.
• Include the engine and check the performance of the vehicle.

How to make an electric boat from an electric screwdriver?

The easiest manufacturing option allows you to independently make a scooter from an electric screwdriver. In this case, you will need to take a device whose engine works from the battery. If there is no way to find it, a motor from a trimmer for grass may be a replacement. All stages of work are performed simply and quickly, so the finished electric steam can be obtained in a few hours.

• At the beginning of the work, take a star from the bicycle and make several holes in it. Their number, size and location are chosen based on the type of wheels used.
• The leading star is made from the metal plate. If there is no way to cut this part independently, it can be bought in any store with goods for bicycles and motorcycles.
• Bought or made by your own hands is attached to the nozzle of an electric screwdriver.
• On the scooter frame, mounting for the power tool used is mounted.
• They try on a bicycle chain on the star, and then fix it.
• A mechanism from the spring and cable is installed on the steering wheel handle. It will be used to turn on and off the engine of an electric screwdriver.
• All the details of the scooter are covered with a special composition that protect metal parts from corrosion.
• Collect the vehicle and conduct its tests.

All of the listed actions do not require skills of such work, so even a beginner is able to cope with the task.

The process of self.scatter independent manufacturing is a difficult event that requires great efforts from the master and observing the correct sequence of actions. If you manage to avoid errors, the result of the work will be a quality vehicle that will appeal not only to the child, but also to the adult.

Homemade electric boat made from a screwdriver: step.by.step manufacturing of a home.made with photos and descriptions, as well as video testing.

The electric steamer can be made from a conventional self.scatter and battery screwdriver, homemade does not require any expensive details, everything can be done with your own hands.

• Kick scooter.
• Battering screwdriver.
• Chain and star from a bicycle.
• Sheet metal.
• Rule of steering wheel with a cable.
• Bolts and nuts.

Read also: Alteration of electric screwdrivers for lithium batteries 18650 18V

The bicycle star had to be finalized and make holes for attaching to the wheel.

The author made the leading star on his own from a metal plate.

A fastening on the scooter frame was made under the screwdriver.

To control the turnover button, the author installed a mechanism from a spring and a cable on a steering wheel handle.

We recommend watching the author’s video where the process of manufacturing electric scooter with your own hands is shown, as well as its tests.