Do-it-yourself pre-picker for the tiller

Average equipment cost

City Model and average cost (rub.) R500 M60 Mini PPR-50 RXYK 0850
Kazan 385,050 285,025 185,510 275,010
Moscow 425 150. 455 050 325,018 175,020 310800
Ufa 610,015 358,035 217,180 380 600
Nizhny Novgorod 370,015 290 120 165,780 290,900
Krasnodar 360,020 305,700 175 450 295,500

Popular baler models

Senosobrachik PPR-50 can be installed with tillers “Neva” has an affordable price and good functionality. This unit is compatible with tillers with a capacity of 10 horsepower or more. Among the disadvantages, the lack of a protective casing is noted, which contributes to the loss of part of the dry plant mass through the rollers.

Parameters Indicator
Processing width, mm. 800
Speed, km / h. until 6
Minimum power, l / s. 10-12
Maximum mass of the pressed briquette, kg. 20
Dimensions (l / w / h), mm. 2 500/1 600/1 500
Equipment weight, kg. 350

Mini R-500. This Italian-made baler surpasses the Russian counterpart by almost 1.5 times in functionality and weight. The unit is characterized by high maneuverability and the ability to work in any area. The hay collector has a small size, high productivity and modern equipment.

Parameters Indicator
Processing width, mm. 1,300
Dimensions of packed hay, mm. 570/630
Power, l / s. from 11
Maximum bale weight, kg. 55
Unit dimensions (l / w / h), mm. 1 800/1 400/1 200
Equipment weight, kg. 520

RXYK 0850. Today it is a roll type which is very powerful and can be used for roughage. The model is characterized by small dimensions, forms compact cylindrical briquettes, which greatly facilitates their loading and transportation by one person.

Parameters Indicator
Processing width, mm. 800
Packaged briquette dimensions, mm. up to 700
Minimum power, l / s. from 24
Working speed, km / h. five
Dimensions (l / w / h), mm. 1 150/1 300/1 200
Equipment weight, kg. 390

Model M60 Mini. Bale hay collector of Slovenian-Italian production. The device has a reliable design, small size and the ability to adjust the working width.

do-it-yourself, pre-picker, tiller
Parameters Indicator
Processing width, mm. 1,050
Briquette dimensions, mm. 400-1 300
Minimum power, l / s. 20
Dimensions (l / w / h), mm. 1 600/3 900/1 350
Equipment weight, kg. 900

Bale balers

Bale balers have only minor differences from round balers. The mechanism of such devices consists of a receiving-feeding auger, a pressing unit and a knitting unit. The unit is driven by the power take-off shaft of the used power plant.

Balers of this type are more compact than roll-fed counterparts and are not as popular.

Review of popular balers for tiller. principle of operation, manufacturers

Anyone who is engaged in m of cattle, even a small livestock, knows perfectly well that one of the main problems is the preparation of feed, namely hay. To begin with, you need to mow the grass or the remaining stalks of grain crops, dry, collect, immerse and deliver to the storage site. All this takes a lot of time and effort, and you need to do everything very quickly in order to remove the hay before the rains “charge”. Handpicking and hay harvesting is time consuming and difficult and tough work. Manufacturers of small agricultural machinery came to the rescue of farmers, first releasing a mini tractor and a tiller, and then a baler for a tiller.

Principle of operation

According to the method of forming briquettes, a hay baler can be baled or rolled. Roll-type hay collectors collect straw and, pressing it against a special grate, create a cylindrical block, the middle of which is always not very dense. For the convenience of subsequent transportation and storage, the roll is tied with twine.

Bale hay collectors are slightly larger than their roll counterparts. Hay, fed into a special chamber by means of an auger, is pressed into rectangular bales and also tied with twine. It should be said that briquettes of this shape are much easier to load, transport and store. When collecting straw, the unit automatically determines the required density and block size, which makes it easy to operate the machinery.

Round baler for tiller

Roll hay collectors are the most common type of this agricultural equipment. This is largely due to:

  • compactness;
  • affordable cost;
  • ease of use;
  • the ability to make the middle of the briquette less dense;
  • all blocks are the same.

It is also important that the baler for the tiller is small and therefore does not need a spacious storage room during periods of inactivity. Of course, the processing width and speed are lower than that of similar standard equipment, but it can be used with almost any tillers.

[box type = “info” align = “aligncenter” width = “”] The round baler consists of a drum, a grate, a pressing belt, a tensioning and knitting unit, as well as a conveyor and a shaft. The pick-up electrical system includes audible alarms and indicator lights. The device is set in motion using the PTO of the power plant.

Tiller baler

The baler for the tiller allows farmers to better remove the dry plant mass left after harvesting grain crops. This device compresses the dried straw into compact rectangular or cylindrical briquettes (depending on the type of device), which can then be easily transported and stored. There are hay collectors not only for full-fledged agricultural machinery, but also for low-power mini-tractors and tillers.

It should be noted right away that at present all models of hay pickers for tillers that are produced by Russian and foreign manufacturers are designed for use with heavy-duty power units with a capacity of at least 10 hp. This is due to the fact that even light devices weigh about 350 kg, plus the mass of hay, here even middle-class units can hardly cope, what then can we say about light tillers. However, there are homemade balers that are also adapted to light power plants.

Specifications

Choosing a factory hay collector for your farm or deciding to make it yourself, you need to pay attention to the main characteristics of the equipment, namely:

  • Performance. In the experience of most farmers, on a small farm, the bale unit can be easily replaced with a less expensive roll-to-roll counterpart.
  • Automation. The most effective are the models that are equipped with a loader and a knitting machine.
  • Useful volume.

Baler for tiller: types, principle of operation and do-it-yourself manufacturing

A tiller baler is a design that allows you to quickly collect straw and compress it into compact bales or rolls for their further transportation and storage. This allows the farmer to save his time and effort, and also make good money on the sale of the collected feed material.

Types of balers for tiller

The tiller hay baler is a trailer-shaped structure that connects to an agricultural machine. The function of the mechanism is to collect and further press the hay and stalks of cereals. Thus, the collected straw takes up much less space and does not crumble during transport.

In most cases, the baler is compact. Such a mini-press is convenient to use when working with tillers that do not have high power. At the same time, the use of such a pick-up significantly narrows the working width and reduces the size of bales and bales.

Depending on the shape that the hay collector gives to the collected straw, structures are divided into the following types:

  • Round balers. such designs twist the collected straw and at the same time press it with a special grate. Using this mechanism, the farmer is able to adjust the density of the bale and leave looser hay inside it. Before removing the collected material, it must be tied with a strong twine. The round baler consists of a rotating drum, a straw pressing belt, a knitting and tensioning mechanism, as well as a conveyor and a movable roller. The electrical system of this design includes sound devices and rotary light signals. The round baler for the tiller receives the power required for operation through the shaft from the engine of the unit. Among the advantages of this type of equipment should be highlighted the low cost, no need for constant monitoring by the operator, as well as the preparation of rolls with the same density and dimensions;
  • Square balers. these designs compress the collected hay into rectangular blocks. As a result, they are much easier to transport and store, and much easier to store pets with. Such a baler to the tiller also allows you to adjust the density of the workpieces, thereby changing their dimensions and weight. The hay baler consists of a knitting mechanism, a movement transmitting unit, a pressing device and a mechanism that receives the collected straw. The square baler also receives power for operation through the shaft from the tiller motor. Among the advantages of this type of balers, it is necessary to highlight high productivity, reliability, no need for special maintenance and long service life.

Both round balers and square balers are widely used on both small and large farms. They are reliable, easy to operate, rarely need repair.

How balers work

The principle of operation of the structure directly depends on its type and device. The tiller roll collects the straw roll, after which the material enters the chamber, where, under the influence of the pressing mechanism, it is rolled into rolls. As soon as the bale of straw has reached the required density, the driver of the tiller will hear a beep, after which the twine must be fed. Then the wall at the back of the chamber is pulled back and the roll is rolled out.

The baler works in the same way. The only difference is that during operation, the straw is directed into the baling chamber under the influence of the auger.

Homemade baler. design features

The tiller baler has a fairly simple device, so you can do it yourself. To do this, you will need to purchase several steel pipes and sheets, as well as gears of different diameters. For manufacturing, you should also prepare a set of strong fasteners in advance. To make a press for Tiller Neva, you need to act in this order:

  • First you need to make a loading chamber. It will have a length of 2.5 m, a width of 40 and a height of 50 cm. For the manufacture of the chamber, it uses sheet steel, 1.8 mm thick, as well as pipes measuring 2 × 4 cm;
  • Pipes are also needed to make the piston and its rod. The latter is made using two pipes welded together, measuring 3 × 3 cm;
  • The piston in the construction of the baler moves by means of two guide rollers. for their manufacture, you also need to use pieces of steel pipes;
  • The piston rod receives force through the pulley from the winch. for its manufacture use a steel cable with a diameter of 5 mm;
  • The width of the winch must be at least 13 cm. Its reel must have 2 sections on which different cords are wound. The steel cable in the first section will be responsible for moving the harvested straw. The baler will also need to be equipped with a nylon cord, which must be wound on the second section of the reel. The cord is needed to return the piston to its original position after compressing the straw;
  • Weld a 45 tooth driven sprocket to the side of the winch. The winch shaft must have a diameter of 3 cm. The winch itself is driven by ball bearings;
  • The hay press must be equipped with a steering wheel, in the device of which there is a sprocket with 14 teeth. The rudder arm should be 168 cm long. Use 2 x 4 cm pipes welded together in the shape of a cross to make it. The force of rotation to the winch must be transmitted by means of a roller chain from the tiller;
  • Finally, fit a loading door made of 2 x 4 cm pipes onto the baler.
READ  Do-it-yourself snow blower for the tiller of the eye

A ready-made hay baler for a tiller can be installed not only on Neva units, but also on agricultural machines of other brands. In any case, a homemade design will show excellent performance, and will save you a lot of time and effort.

Brand history

The company began its formation in 1994, when the first serial models of various agricultural machinery began to be produced. Specifically, such a vector of development aimed at farms and their provision was approved, which was the right decision at that time.

Over time and the growth of production rates, the company began to open its factories in other locations in Europe. This decision allowed not only to increase the creation of technology, but also gave a large number of jobs where these factories were located.

Thus, the company, in addition to its own main activity, also does a certain social function, which is very important in today’s difficult times.

Popular manufacturer

In 2012, Wirax merged two of its own branches located in Turkey and Romania, making one huge corporation. The company cooperates with many Turkish manufacturers of equipment and related devices to them, which allows it to respond in a timely manner to constant changes and new trends in this market segment.

Homemade baler for hay to the tiller with your own hands: instructions, photos, videos, drawings

Tiller balers

The tiller baler is an indispensable device for those cases when it is necessary to pick up hay and straw after harvesting from the fields. This hay is used to prepare animal feed for the winter, so the pick-up is a very useful special equipment for small lands and huge agricultural fields.

  • Features of the
  • Hay press
  • The principle of operation of the baler
  • The advantages of using this technique for making hay:
  • Types of balers for mini tractors
  • Roll
  • How to make a baler for a mini tractor with your own hands?
  • How the baler works
  • The advantages of using this technique for making hay are:
  • Types of balers for mini tractors
  • Roll
  • How to make a baler for a mini tractor with your own hands?
  • Is the tiller rake a much-needed piece of equipment??
  • How to make a do-it-yourself rake for a tiller and what is needed for this?
  • Stage 1. Work on creating the wheel axle
  • Stage 2. Installing the drawbar and stands
  • Stage 3. Checking the reinforcement system
  • Stage 4. Work on the rake bar
  • Technical features of the rake tedders
  • Design features
  • Can I do it myself?
  • Brand history
  • Repair of the Polish rotor scythe
  • Wirax. 1.65m
  • Wirax. 1.85m
  • Similar posts
  • Features of operation
  • The press attached to the tiller ensures fast collection of hay and straw;
  • The use of a mini device minimizes the cost of collecting hay, allows you to get the maximum profit or benefit from the harvested hay;
  • A home-made picker is often used, but compared to factory mini-presses, the former are inferior in terms of technical characteristics, operational capabilities;
  • The baler can be rolled and baled;
  • It is convenient to transport and store bales and rolls of hay in warehouses;
  • Mini models installed on the tiller are widely used on farms and cattle-breeding enterprises. The mini baler is able to handle large enough areas, providing the farmer with high quality, speed and economy of hay collection into bales or bales.

Hay press

When harvesting hay, it will not be superfluous to use a device for obtaining bales. This bale press ran for three seasons. With this simple device, we completely feed our livestock. Pressed hay gives clear advantages during loading, transportation, loading into storage, as well as better retains its nutritional qualities.

The loading chamber has the following dimensions: length. 2500 mm, height. 500 mm, width. 400 mm., Made of a profile pipe 20 by 40 mm. and sheet iron 1.8 mm thick. The piston is made of 20 x 40 mm shaped tubes, the piston rod is two shaped tubes welded together, 30 x 30 mm in size. The piston moves on guide rollers. The winch force is transmitted to the piston rod through a pulley with a steel cable with a diameter of 5 mm.

After compressing the hay, the piston returns to its original position with a nylon cord. The winch is made of a shortened conveyor roller. The winch reel width is 130 mm. The coil has two sections. a steel cable is wound on one, and a nylon cable on the other. A driven sprocket is welded to the side of the winch. having 45 teeth. Winch shaft 30 mm thick. The winch rotates on ball bearings.

There is a 14-tooth drive sprocket on the steering wheel. Handwheel arm length 1680 mm. It is made of a 20 x 40 mm profile pipe, cross-welded to each other. Rotation to the winch is transmitted by a roller chain from agricultural machinery. Loading door from the same 20 x 40 mm profile tube.

First, a frame was made, and then it was sewn up with wood, and from the front side with sheet metal. The press moves on wheels from the IZH motorcycle.

How the baler works

The essence of the work is as follows. This equipment performs technical processing of the crop cut by the mower. It collects freshly cut grass or hay, and forms windrows with cut dry stems with a residual moisture of 26%. The pick-up collects the material into compressed bales.

do-it-yourself, pre-picker, tiller

The advantages of using this technique for making hay are:

IT ACTUALLY WORKED!?! DIY Rock Grizzly (Rock Separator, How to Remove Rocks from Soil)

  • labor costs are reduced by 3-4 times;
  • such attachments can be independently adjusted;
  • the use of a pick-up reduces drying time and hay loss;
  • in the future, the quality of hay during storage and transportation is significantly increased.

Types of balers for mini tractors

Most often it is used to harvest dried stems. The pick-up picks up hay in the windrows with spring tines. After each portion of hay is rolled tightly into bales. The roll is fed by spring fingers into the pressing mechanism. As the mass of hay increases, so does the density of the bale.

The hay rotates in the bale chamber. The pick-up will beep when an even bale of the desired density is formed. The take-up mechanism is activated when the desired bale size is reached. And then wraps it with twine. As a result, the packed hay is pushed out.

With the help of such equipment, 20 tons of hay can be prepared in 20 summer days.

This equipment packs hay into rectangular briquettes. They can be of different sizes. The grass is gripped by the spring tines and sent to the baling section. The size of the briquette can be adjusted. The bale is sweaty packed, tied with twine and thrown out.

How to make a baler for a mini tractor with your own hands?

It should be said right away that you will not get a perfectly similar pick-up with factory equipment. It is technically very difficult to implement such a mechanism. Therefore, a binding device is not installed in a home-made unit, and the roll does not get the required density.

  • We assemble the chassis on a pair of pneumatic wheels.
  • We install on it a front head and a pick-up with a conveyor.
  • We mount the press chamber separately. At the bottom of the press mechanism, we install the rollers and the pressure brush. In the upper part we put a plate on a spring. She will subsequently press the compressed layers for a tight winding of the roll.
  • We assemble the drive that drives all the working units. We connect the cardan with a 2-speed gearbox. A chain drive will go from the gearbox to the rollers, as well as the pick-up conveyor.
  • Install the gears on the hay picker mechanism. The gears should be larger in diameter than on the drums. This will increase the pick up speed and simultaneous pressing force.

In order for you to get such a device, we will probably add a couple of drawings necessary for the work.

How the baler works

The essence of the work is as follows. This equipment performs technical processing of the crop cut by the mower. It collects freshly cut grass or hay, and forms windrows with cut dry stems with a residual moisture of 26%. The pick-up packs the material into compressed bales.

READ  How to make a trailer for Tiller Neva

The advantages of using this technique for making hay are:

  • labor costs are reduced by 3-4 times;
  • such attachments can be independently adjusted;
  • the use of a pick-up reduces drying time and hay loss;
  • in the future, the quality of hay during storage and transportation is significantly increased.

Types of balers for mini tractors

Most often it is used to harvest dried stems. The pick-up picks up hay in the windrows with spring tines. After each portion of hay is rolled tightly into bales. The roll is fed by spring fingers into the pressing mechanism. As the mass of hay increases, so does the density of the bale.

The hay rotates in the bale chamber. The pick-up will beep when an even bale of the desired density is formed. The take-up mechanism is activated when the desired bale size is reached. And then wraps it with twine. As a result, the packed hay is pushed out.

With the help of such equipment, 20 tons of hay can be prepared in 20 summer days.

This equipment packs hay into rectangular briquettes. They can be of different sizes. The grass is gripped by the spring tines and sent to the baling section. The size of the briquette can be adjusted. The bale is sweaty packed, tied with twine and thrown out.

How to make a baler for a mini tractor with your own hands?

It should be said right away that you will not get a perfectly similar pick-up with factory equipment. It is technically very difficult to implement such a mechanism. Therefore, a binding device is not installed in a home-made unit, and the roll does not get the required density.

  • We assemble the chassis on a pair of pneumatic wheels.
  • We install on it a front head and a pick-up with a conveyor.
  • We mount the press chamber separately. At the bottom of the press mechanism, we install the rollers and the pressure brush. In the upper part we put a plate on a spring. She will subsequently press the compressed layers for a tight winding of the roll.
  • We assemble the drive that drives all the working units. We connect the cardan with a 2-speed gearbox. A chain drive will go from the gearbox to the rollers, as well as the pick-up conveyor.
  • Install the gears on the hay picker mechanism. The gears should be larger in diameter than on the drums. This will increase the pick up speed and simultaneous pressing force.

In order for you to get such a device, we will probably add a couple of drawings necessary for the work.

Is the tiller rake a much-needed piece of equipment??

First, let’s figure out what they are for. With this device, you can level a dug garden, collect mowed grass and hay, and also clear the area of ​​weeds and debris.

The above work takes a lot of time and effort if done manually. Therefore, such attachments as a rake to the tiller are an essential assistant. However, not everyone can afford to purchase this device, and then there is another option, to make them yourself.

How to make a do-it-yourself rake for a tiller and what is needed for this?

First, let’s figure out what they are for. With this device, you can level a dug garden, collect mowed grass and hay, and also clear the area of ​​weeds and debris.

The above work takes a lot of time and effort if done manually. Therefore, such attachments as a rake to the tiller are an essential assistant. However, not everyone can afford to purchase this device, and then there is another option, to make them yourself.

How to make a do-it-yourself rake for a tiller and what is needed for this?

Tools you can’t do without when creating a rake:

  • 1. Drill of good power;
  • 2. Varnish and chalk;
  • 3. Profile pipe and wire;
  • 4. Ruler;
  • 5. Welding equipment;
  • 6. Solid oil;
  • 7. Seeder.

Next, there will be instructions with drawings for creating a rake.

Farmers who create attachments for a tiller with their own hands never regret their venture, since such equipment serves for a long time and efficiently. The main thing in this matter is to follow all the rules and not deviate from the instructions. A drawing of a rake for a tiller is presented below.

Stage 1. Work on creating the wheel axle

  • Metal wheel production. We need a disk with a diameter of up to 40 cm. After knocking out the inner bearing, you can not get it and place a metal rod in the same place. Then we wrap the disk with a strip and carefully weld it. The result should be a wheel with a wide tread.
  • Creation and installation of the axis. The rod is threaded through the wheels, while a few centimeters should remain. It is very important that the retaining ring is welded on the inside and a hole for the cotter pin must be drilled from the outside. The drill creates a seat in the center of the rod. If there is no cotter pin, a 3 mm electrode can be used instead.
  • Creates a location on the axis to attach to the wireframe. To make the homemade rake easy to use, we make special fasteners for the metal frame. Namely, two plates located 10 cm from each wheel. Using welding equipment, we attach metal strips to the axis by weight, therefore reinforcements should be installed.

Stage 2. Installing the drawbar and stands

  • Installation of oblique supports. We weld several metal squares strictly parallel to each other to the axis. Difference in length can be removed angle grinder.
  • Drawbar attachment. Having measured the distance from the support to the support, we determine the center where the drawbar will be located. To do this, you need a pipe with a thick wall with a diameter of 3 cm. The height can be set at will. The pipe must be necessarily thick-walled, since a large load acts on the rake.
  • Drawbar hook making. Here, everything is done at the request of the master: weld on an ordinary straight pipe or bend it. It is important that the drawbar itself is well attached.

Stage 3. Checking the reinforcement system

The average weight of the finished rake is about 15 kg. Therefore, in order to avoid unexpected breakdowns, it is necessary to fasten the weak areas with 15×15 squares. This method of strengthening is suitable for racks located in the middle, and after fastening together in the center of the parallel reinforcement, we weld the brace. The lowering and raising equipment pull rod is also an overhead reinforcement. Thus, the rake will not roll over on its side.

Stage 4. Work on the rake bar

  • Rake axle fasteners. We make a working grip of the device, cutting 150 cm from the pipe. Then, two pipes are welded horizontally to the racks, where the axis will be located. As a result, we get a pipe rotating in a circle in the mount.
  • Making an eyelet. In this case, the rod must be welded to the upper corner of the pipe. Its second end will be located on the eccentric, in contact with the center of the drawbar. By applying slight pressure on the handle, you can raise or lower the rake.
  • Welding springs. Springs are bought or independently bent out of the wire. Then we weld them to a corner or install them in a hole made with a drill. Photos of the finished rake can be viewed below.

After the rake has been assembled, it is necessary to lubricate all rubbing parts with grease. And then over time this procedure should be repeated to avoid breakdowns. You can also watch the video “Rake to Tiller Neva”.

Technical features of the rake tedders

Harvesting hay has always been considered a promising direction of agricultural activity. After all, this is the most practical way to provide feed for livestock in winter.

At the dawn of technological progress, this event was carried out in two stages: the men mowed the grass, which was then raked into swaths. This hay harvesting scheme looks quite costly. Currently, tedders are used to rake hay.

It is worth noting that this equipment has nothing in common with the usual rakes that are available in every subsidiary farm. In fact, this is a multi-purpose complex operating in automatic mode and forming hay into neat swaths, convenient for transportation and storage.

Please note that the equipment is serviced by one operator. In this article, we will consider the technical parameters of such units, and tell you how you can make a tedder rake yourself.

The mounted tedder rake is a finger-type unit mounted on an all-metal frame. The design is based on rotating rotors, each of which is brought into a separate unit.

The rotors are mounted on tapered bearings, the power required for rotation is transmitted through the propeller shaft of the tractor. Each rotor is equipped with raking fingers made of high strength steel.

There are about forty fingers per rotor. So that the working elements do not receive mechanical damage, the fingers are attached to a spring suspension.

The tedder rake is classified in several ways:

  • By the type of tractor used. There are two categories here: tractor and horse. The first group performs the function of mounted or semi-mounted equipment for tractors, the second is intended for tillers.
  • By the way the roll is formed. Here you can distinguish transverse and lateral aggregates.
  • By the design of working elements. There are three types of tedder rakes on sale. Finger-wheels: they have a system of shock absorption of working elements, therefore they are optimally suited for fields with difficult terrain. Drum: robust and reliable construction with independently rotating rings. Toothed: units with variable angle of rotation and inclination of teeth.
  • By the type of attachment to the vehicle.

Due to the design of the working elements, these units are called “sun rake”. This equipment is available in several modifications. The key differences between the models are the number of rotors installed: 4 or 5.

The covered area directly depends on this, and, accordingly, the performance of the equipment. The average productivity of the tedders is 6-8 hectares per hour. Recommended moisture content of hay should not exceed 70%.

An exception is the GVK-6 model, which is capable of forming plant mass in rolls with a moisture content of 85%.

READ  Do-it-yourself hiller for a tiller size

The tedder rake is operated and maintained by one tractor driver. Due to the absence of complex elements and independent installation of rotors, replacement of damaged working elements can be carried out in the field.

The advantages of the tedder rake include the ability to adjust and double the rolls. In addition, the equipment can shake up ready-made swaths, which eliminates the risk of grass spraying. Among the shortcomings can be noted a weak chassis. This problem is especially noticeable on trailed models.

Can I do it myself?

We have already mentioned that the tedder rake does not have technically complex assemblies and elements in its design, therefore, if you wish, you can make such a unit with your own hands.

On the Internet, you can find various schemes and drawings of tedders designed and developed by home craftsmen. Considering that not every farmer has a tractor, we will present an elementary design that is quite suitable for working with a tiller.

Please note that a three-wheel tedder rake is enough for a tiller. If the equipment will be used with a tractor, the number of rotors can be increased to 5.

A metal pipe is used as the basis for homemade rake tedders, on which brackets are installed for attaching the rotors.

To allow the working elements to rotate freely, two tapered bearings and a hub (for each rotor) are required. This element can be borrowed ready-made from a VAZ car.

In addition, a hitch is installed on the frame to aggregate the mechanism to the traction device. The unit can be supplemented with a hydraulic system, which will allow the rake to be transferred to the transport and working position.

Impeller discs are made of metal sheet, about four millimeters thick. Steel wire up to 7 millimeters in diameter is used as raking fingers.

The resulting design is practically not inferior to the factory models. At the same time, in terms of build quality, homemade modifications sometimes surpass industrial counterparts.

Wirax. 1.65m

“Wirax”. 1.65m is an excellent option for farms and individual farmers who value reliability and efficiency in the unit above all. Thanks to high-quality parts and a durable body, the mounted rotary mower Polish 1.65, will serve its owner for more than one year, regularly performing its main tasks.

Characteristics of “Wirax”. 1.65m:

  • weight. 300 kg;
  • width of the mowed surface. 1.65 m;
  • height of the mowed grass (min). 3.2 cm;
  • height of the mowed grass (max). 4 cm;
  • rotation speed. 540 rpm;
  • number of disks. 2;
  • the total number of knives. 6;
  • drive type. BOM.

Repair of the Polish rotor scythe

HELP THE CHANNEL! Webmoney Wallets: Hryvnia U272084624279, Rubles R152481596726, Dolar Z395829708019, Qiwi.

The KamAZ 4308 operating manual, which you can find here, can significantly reduce the risk of unit breakdown.

The Polish rotary mower, like similar models from other manufacturers, is designed for a wide range of agricultural activities. Mowing grass for livestock feed, harvesting various crops. all this is included in the scope of rotary mowers. However, as in any other technique, there are also several nuances that you need to pay attention to first of all when purchasing such a mower.

Device complete set

Among the main points and characteristics to which you should pay attention are the following:

  • minimum and maximum cutting height of the mowed grass;
  • the area that the unit processes;
  • rotation frequency of knives;
  • the width of the strip of the processed surface, produced by the mower in one pass.

Paying attention to these points, you can buy yourself a reliable unit that will last for many years. However, there are already quite popular models in which all these characteristics are combined in optimal proportions.

For a general view of the mower, see the video.

Homemade wool picker picks wool

Nevertheless, there is an even more convenient assistant, which bears the proud name “self-propelled lawn mower with a seat”, you can get more detailed information here.

Overview Assembling the Huter Lawn Mower

Rotary Mower Gear Lubricant.

Gearbox lubrication. Rotary mower The instructions say that the mower is ready for use. But it is better to check and add the required amount.

Ratios of Oil And Gasoline For Mower.

Chainsaw oil and gasoline ratios, oil selection, instructions Observance of the correct proportions of oil and gasoline for a chainsaw avoids the vast majority of problems that arise with this tool. At the same time, it is necessary to choose.

Assembling the Diesel Engine 9 HP F-186.

assembly of diesel engine 9 hp F-186 Author: Andrey Sivochub Published: 13 oct. 2017 Views: 22 073 I liked it: 110 I didn’t like it: 19 subscribe don’t miss new and interesting videos))) youtube tags: # diesel engine assembly9l.

Features of the mower in the photo.

Model Wirax 1.85m

So, we examined the technical characteristics of the main models of Polish rotary mowers. The indicators are largely identical, but there are still a couple of differences that affect the final price difference. Which one you decide to purchase, it all depends on what area you have at your disposal and what specific requirements for the unit are important for you.

Wirax. 1.85m

Wirax. 1.85m is designed for mowing various crops, grass and much more. In addition, the Polish rotary mower 1.85 is an effective method of combating weeds and weeds that sprout abundantly in the fields.

Due to its design, the mower can handle large areas, which is very beneficial for large agricultural enterprises. Rotary mower Polish, will become an indispensable assistant in rural life.

Characteristics of “Wirax”. 1.85m:

  • weight. 380 kg;
  • dimensions (l / w / h). 320cm / 105cm / 100cm;
  • width of the treated surface. 1.85 m;
  • speed. 10 km / h;
  • the total number of knives. 6;
  • tractor requirements. at least 40 hp;
  • number of disks. 2.

Save money and time with a DIY Tiller Baler

The round baler, which can work as a hitch to the tiller, greatly facilitates the work of the farmer. It can mechanize the long and laborious process of collecting ready-made hay from the field, at the same time rolling it into dense rolls for easy transportation and further use.

Advantages and disadvantages

The roll hay collection unit with a press is the most popular among other similar equipment. The choice of just this type of pick-up for do-it-yourself manufacturing will provide:

  • From the start. the ease of setup, provided by the simplicity of the machine design.
  • At work. gentle baling without deformation and crumbling of the plant mass.
  • The ability to create minimal bales of hay that can be easily carried and stored with the efforts of one person.
  • Subsequent ease of storage and use of the formed bales of hay.

Drawing of a homemade baler for hay with your own hands 1- frame; feeding conveyor; 3. rollers; 4. anterior chamber; 5, 6, 7. working conveyors of the anterior chamber; 8. pressing chamber; 9. belt working element; 10. tensioner; 11. pressure sensor; 12. stitching device; 13. supporting weights; 14. support rollers; 15. driving drum; 16. press chamber body; 17. support rollers; 18. electric motor; 19. safety clutch; 20. reducer.
With self-made work, it is almost impossible to repeat 100% the complex device of factory pick-ups, which, even with a decrease in size, require a tractor power of at least 16. 20 hp. Therefore, the binding device is usually not installed in it, and the roll may not be so dense.

do-it-yourself, pre-picker, tiller

Appointment

The hay-straw round baler is used to perform a full cycle of assembly and packaging of hay or straw, providing a sufficiently high quality of results:

  • A selection of dried hay from windrows in the field;
  • Pressing a selection of dry plant matter;
  • Simultaneous twisting of the pressed web into a roll.

Photo of a homemade round baler

Round baler baler to tiller do it yourself

Commercially available balers are usually designed to work with a conventional or mini tractor. However, for small business executives who have only a tiller in their arsenal, this is not always convenient. a motoblock system is often not able to pull a bulky device and provide it with sufficient energy for full-fledged work.

Materials (edit)

The round baler consists of the following main parts:

  • Lobs, which is the basis for the installation of all units and an element of attachment to the traction unit.
  • Undercarriage with a base for a bale chamber on 2 wheels, on which the device moves across the field.
  • Pick-up with a conveyor that collects a lot of hay or straw from the field.
  • Cylindrical casing chamber with pressing mechanism.
  • Cardan drive with mini gearbox overrun.

At the same time, it is desirable that the tractor itself. the base tiller. is still as powerful as possible in order to ensure the required rotation speed of the rollers and the productivity of the pressing device.

Step-by-step instruction

Sequential assembly of a homemade hay baler to the tiller will facilitate the installation work and do it in the best quality. To independently create a convenient baler for a home tiller, you will need to complete several stages of work:

  • You need to start with the assembly of the chassis. the basis on a pair of pneumatic wheels.
  • A front head and a pick-up with a conveyor are installed on it.
  • The press chamber is mounted separately, in the lower part of which the rollers and the pressure grid are installed, and in the upper part there is a plate on the spring, which will press the compressed layers for a tighter winding of the roll.
  • Next, we assemble the drive, which gives movement to the working parts of the machine. we connect the cardan with a 2-speed gearbox, from which the chain drive will go to the rollers and the pick-up conveyor.
  • On the mechanism of the hay pick-up device, we install gears of a larger diameter than on the rollers in order to increase the pick-up speed and the force of simultaneous pressing.

To obtain better results when collecting hay with a tiller, you can use a simpler and long-term, but effective option. dividing the work into picking up the grass mass with a walk-behind rake and pressing it with a separate manual or electric device.
In the video, a homemade baler made by hand: