Do -it -yourself trailer mower. Video: Rotor’s mowel on a single tractor with your own hands

DIY Rotor haying. how to make homemade vases from the rear axle, how to make a hinged combine from the gearbox

Work on its own land is a rather difficult occupation. In order to facilitate the whole process, special labor devices were invented, which over time evolved and automated.

However, in addition to large.scale production units, there is a need for individual means of cultivation of land, which will differ in mobility, efficiency, environmental friendliness, etc.D. And at the same time, without fail, the whole agricultural vehicle should cope with maximum efficiency with the task set before it, whether it be a single tractor or mower, which will be discussed today.

Varieties

It is no secret that often the creators of a particular project are not always able to meet the optimal cost of manufactured equipment. In this regard, ordinary gardeners are not ready to purchase a professional tool at an extremely high price. However, no one forbids making devices with your own hands.

In our case, it is worth noting that a home.made mower cannot be called a complex unit, which is not possible to fulfill its own efforts. It is only necessary to take into account the main points of its creation.

Currently, there are two varieties of mowers on a single tractor:

The segment mower is quite complicated and often problematic in maintenance, due to frequent clogs. In turn, the rotary is an easy to create and operate option, which affects the growth of its popularity in horticultural circles.

What is a rotary mower for a mini.vector

Consider how to make a mower for a mini.tractor with your own hands and what they are.

Segmented samples have a smaller range of work than rotary. The segment mower for a mini.tractor is used by utilities and designers in landscape. They are cut and mowed by lawn grass, as well as ennoble the territories.

The segment mower is of great popularity among users, because it costs much cheaper than rotary. It consists of well.sharpened plates and a movable knife.

But farmers believe that the rotary model is more profitable to use than a segment.

It can be cut not only by lawn grass, but also by some types of agricultural crops. The rotary mower consists of a metal structure, working discs with knives, which are driven through the tractor power shaft.

Consider how to make such an indispensable thing for a tractor with your own hands.

First you need to decide which type of device is needed, and then already with the types of tools and materials.

How to make a rotary mower for a tractor with your own hands

The following materials and tools will be needed for the manufacture of rotary hayfields:

  • wheels with a diameter of 450 mm;
  • wheel axis;
  • metal pipes and corners (thickness and diameter for choice);
  • sheet metal;
  • pulleys, knives, bearings;
  • rubber belt;
  • welding machine;
  • drill;
  • Bolts and nuts.

We will figure out how a rotary mower is made for a tractor with your own hands.

For rotary lawn mower, you can use scrap metal. You must definitely know what type of connection a mini.tractor has. There are 3 types of home.made connection to the tractor:

First you need to cook the frame, attach discs on it, and on them. knives. Close all this with a protective casing. It will be good if you have old knives from a tractor rotary lawn mower. They just need to be seized from rust, if any, sharpen and weld to the disks. The discs themselves can be made from a barrel or sheet metal 4 mm thick.

Now we make axial shafts from a pipe with a diameter of 3 cm. We fasten one bearing on the pipe. It remains only to attach discs with knives to the axial shaft, weld the pulleys to the pipe, having previously fixed the second bearing on them, and the lawn mower can be considered ready. In order for a homemade rotary mower to the tractor completed, you need to attach a protective metal casing to the entire structure. the shield.

Such a mower mowel for grass copes with grass with a height of 5-7 cm. She can mow grass for the preparation of hay, as well as remove unnecessary harmful plants. Such a haymaking is considered the most profitable and cheap. You can, of course, buy a factory haymaking for a mini.tractor if you do not want to load yourself with independent manufacture and search for material, but homemade rotary mowers for a mini.tractor will last much longer.

The second type of lawn mower. segment. Such equipment is much more difficult to manufacture with your own hands, because its action is given by a crooked-shaped mechanism. One of the cro.shirts is connected to the crankshaft of the power unit. Knives are attached on the side of the krivoship. Knives are similar to 2 saws interconnected, and they work on the principle of scissors. they simply cut grass.

In order to make a segment model for a minister with your own hands, you need to take into account the stages of the sequence of its creation.

The optimal width of segments is considered 72 mm. It is necessary to install a gearbox on a metal base. It has a shaft on which the hub is attached. You need to install a pulley on the shaft, a wheel on the frame, which will not let the mower burst into the ground, and also set up the desired mowing height. The segment mower for the mini.tractor is driven as the rotary. through the power shaft. The most important thing in the work and use of the rotary or segment model is to observe safety precautions.

How to make a mower

Materials for direct manufacture:

  • wheels, number 4 pcs. and the diameter, which should be about 45 cm;
  • special axes designed to install the wheels themselves;
  • metal sheet;
  • the bottom from the old barrel (metal);
  • knives. 4 pcs.;
  • screws and nuts that will be fixed with knives;
  • welding machine;
  • chainsaw;
  • pen for special control, or you can take the pipe and make it yourself.

It is worth noting that if you do not have special wheels for a mower, then you can quite safely use wheels from a children’s old stroller. Actually a chainsaw is installed on it, it, in turn, will rotate the rotor.

For a mini.vector

First of all, it is worth noting that this kind of device will consist of a casing, fixed on the discs of the knives and frames. The movement itself arises due to the gross power of the mini.tractor, which is used in the work. Regarding the ground, this device moves directly on the disks at the bottom.

yourself, trailer, mower, video, rotor, mowel

In order to make a welded frame you need to connect corners with a size of forty centimeters. Do not worry if you do not have the opportunity to buy good and durable, new metal, since for this process any scrap metal actually is suitable that you can only find.

As for the knives, they can be taken from the old tractor mower called “Rotorka”.

But they will need to work on them, namely shortened, since they are 3 cm. more than we need. This must be done so that the mower can “fully” work, otherwise the transport will simply have a low level of traction. If we talk about the height precisely from the beam, then it is 35 cm.

From a metal sheet, it is necessary to cut the disks in the amount of two pieces, and the diameter of which is 39 cm. It is worth noting that most owners of homemade mowers argue that such discs can be cut precisely from the barrels of old ones made of iron.

After which you can safely weld the knives to them, but they must be installed in such a way that their rotation is carried out easily and at ease. It is under the influence of a centrifugal force that they will actually produce a mowing.

You must remember that this kind of mount should meet the high level of strength. As for the supports of the lower ones, they should be made precisely from the disks taken from the lushpan and the diameter of which should be about 45 cm.

Watch the video features of the hayfield for a mini.vector.

The axial shafts can be made directly from the old metal pipe and with this diameter it should be 30 mm. As for the bearings, they must correspond to number 180106. Lower, of which should be installed precisely in the pipe, while the upper one. precisely in the pulley. It is worth noting that this design has a welded pulley. You can find out about the tractor segment mitch for the tractor, which is one of the main competitors for this unit by passing this link.

Rotor for a walk.behind tractor

First of all, it is worth noting that this kind of device is widely used both for beating grass growing on lawns and hay harvesting. You must remember that, through the influence of the mechanism on small grass, it grinds it, while high grass mowed it. You can find out about other mowers for high grass by passing the following link.

In order to personally make this kind of tool you need: chains taken from a chainsaw gearbox, discs in the amount of two pieces from a seeder seeder. detailed information about which oil is used to lubricate the chain of the chainsaws in this article. To make the knives themselves, you need, metal hardened 65 g. It is worth noting that each direct disk should have four knives.

An example of a homemade rotary mower in the photo.

For this kind of installation, you must drill a carbideal character by each individual disk, peculiar openings, the diameter of which should not exceed 6 mm. The knives themselves can be attached through the use of a special shinka, it is actually installed on a couch and it does not matter what fasteners the knives will be installed.

You must remember that the gap itself is between the knife and the tire should not be more or less by 1-2 mm directly from the knife thickness. over, also take into account the fact that the knife itself should have the possibility of rotation by all 360 degrees.

Axial fasteners are made of carbon durable steel, their size should be 8 mm. It is this axis that is delayed from the discs itself to the stop and at the same time the movement of the knives should be free. It is also worth noting that such a home.made mower is intended for the Neva motornote, you can find more detailed information here.

Homemade mower for a walk.behind tractor on video.

How to make a device with your own hands for MTZ tractor

Thanks to this kind of device, you can without any problems not only be a beard of grass itself, but also its grinding. In order to make this unit with your own hands, you must know what they actually consist of this kind of home.made mower. So, its components:

  • Shaft with strap knives, the number of which is twenty-four pieces;
  • Cheeks that are translated to the shaft itself;
  • Knives that can be performed directly from the steel spring. It is important to remember that the edges located on them should be extremely acute. For them, you need to make peculiar axes of the size of 9 mm.

It is important to remember that such a homemade rotary mower for T 25 is also great and aspects of its manufacture are no different.

In fact, rotary mowers have the same structure, the only thing that the differences are in knife models and fastening. for rotary mowers for mini.tractors are described in detail in this article.

Safety safety precautions for a homemade rotary mowing

In this article you had the opportunity to find out how you can make a rotary mower with your own hands. In fact, as you have seen yourself, there is nothing particularly complicated in this process, therefore, even a professional can easily cope with this kind of manipulation. However, if you do not want to take risks and start with a small one, we bring to your attention a manual gasoline mower for the grass.

The most important thing in the manufacture of a rotary mower is that you are extremely carefully repelled from our advice on both regarding manufacture and safety.

You may also be interested in the article Home.made sawmill with your own hands.

Safety safety precautions for a homemade rotary mowing

In this article you had the opportunity to find out how you can make a rotary mower with your own hands. In fact, as you have seen yourself, there is nothing particularly complicated in this process, therefore, even a professional can easily cope with this kind of manipulation. However, if you do not want to take risks and start with a small one, we bring to your attention a manual gasoline mower for the grass.

The most important thing in the manufacture of a rotary mower is that you are extremely carefully repelled from our advice on both regarding manufacture and safety.

You may also be interested in the article Home.made sawmill with your own hands.

What is a rotary mower for a mini.vector

Consider how to make a mower for a mini.tractor with your own hands and what they are.

How to test lawn mower electrical safety switches

Segmented samples have a smaller range of work than rotary. The segment mower for a mini.tractor is used by utilities and designers in landscape. They are cut and mowed by lawn grass, as well as ennoble the territories.

yourself, trailer, mower, video, rotor, mowel

The segment mower is of great popularity among users, because it costs much cheaper than rotary. It consists of well.sharpened plates and a movable knife.

But farmers believe that the rotary model is more profitable to use than a segment.

It can be cut not only by lawn grass, but also by some types of agricultural crops. The rotary mower consists of a metal structure, working discs with knives, which are driven through the tractor power shaft.

Consider how to make such an indispensable thing for a tractor with your own hands.

First you need to decide which type of device is needed, and then already with the types of tools and materials.

The purpose of the rotary mowing

If the farmer is interested in how a mower mower can be made with your own hands, you must first familiarize yourself with its purpose and the principle of operation. Such a device is designed to mow unnecessary vegetation in the meadows, fields and other territories, which allows you to maintain them in optimal condition. Rotor.type mowerpowers are a functional device that can be used for beating weeds, as well as for removing bushes and other plants along the roadway.

Since the effectiveness of such units is much higher than trimmers and other devices, they are universally used in the rural and utilities. Rotor braids are indispensable when performing work on hay harvesting, which makes them an extremely popular type of equipment.

Varieties

When planning to assemble this equipment with your own hands, it must be remembered that the seno.sized for the tractor can be two main types. The first group of devices includes segmented products providing for the use of metal plates and knife. The main feature of this category of products is an affordable cost that made them extremely popular among consumers.

However, segmental products are low in the processing of impressive thickets of grass, weeds, shrubs, as well as some agricultural crops. In this regard, rotary devices that have increased performance are much more common for such tasks. The second.type devices have a universal purpose, can be used to work with various types of plants, hay harvesting for livestock.

Mount to the tractor

Finding out how to make a rotary mower for a tractor with your own hands, you will need to decide on the type of attachment to tractor technique. The functionality of the devices, as well as the working characteristics, depend on this.

  • Semi.wow units. Provide for the presence of pneumatic fires, which allows more to distribute the load more uniformly. They are attached as a rear mounting equipment using a bracket, and hydraulic mechanisms are used for lifting/descent;
  • hinged devices. The equipment is attached according to the standard scheme, located on the front of the tractor, suitable for operation in a complex landscape;
  • Practicing equipment. Mounted to the hydraulic system of the tractor, equipped with rotors in an amount of at least 3 pcs, which are installed behind the equipment.

At the stage of studying the drawings, it is advisable to familiarize yourself with the methods of installing the mowing and, if necessary, make changes to the design of the selected model of the device. It should be noted that trailed models are the most easy to manufacture.

Do.it.yourself manufacture

Self.assembly of this kind of equipment seems to be a fairly simple task, for the successful implementation of which certain knowledge, experience, materials and tools will be required. You should decide on the model and drawing of the device, after which you can proceed directly to the assembly.

Necessary tools and materials

Since a homemade rotary mower seems to be a technically complex device, the master will need to have a fairly wide list of manufacturing materials:

  • wheels up to 45 cm with a diameter. you can take from children’s bicycles or old strollers;
  • The axis that will be used to mount the wheels;
  • pipes and corners from which the frame of the device will be assembled;
  • sheet metal with a thickness of at least 0.4 cm;
  • pulleys, bearings, fasteners;
  • knives;
  • belts.

Door Broke Off. Found Hidden Rust. 1967 VW Bus. Gregory. 22

During the assembly process, the master will need to use a standard set of tools, as well as an electric drill and a welding machine.

To ensure maximum design strength, it is strongly recommended to use materials for its production that do not have severe wear and corrosion damage.

Assembly order

Before proceeding with the independent manufacture of the device, you should familiarize yourself with its device. It is a frame on which 2 disks with knives fixed on them are placed, as well as a protective casing. As the main moving force, the power selection shaft of the tractor is used, which avoids the need to use a separate engine.

The assembly algorithm provides for the following actions:

  • Boil the device using metal corners and pipes.
  • Make cutting elements. For this purpose, you can use similar components from old equipment.
  • Using sheet metal, you need to cut 2 round blanks, the diameter of which will be 39 cm, and then install the cutting elements on them.
  • Collect axial shafts using metal pipes with a diameter of 3 cm, as well as bearings for them and a metal pulley.
  • Mount disks with working knives on the shaft, and then weld the pulleys to the pipe.
  • Install a protective casing for safe operation.

A mower collected according to a similar algorithm is able to process areas up to 115 cm at a time, which makes it a simple and effective device to combat vegetation in areas. If desired, you can noticeably simplify the structure by installing the lower discs directly on the frame. For this purpose, you will need to use a welding machine, which will guarantee the reliability of the design. This will make it possible to mow low grass, up to 7 cm high, at a speed of 10 km/h, which makes the product the optimal solution for hay harvesting, as well as the removal of plant residues after the main mowing.

Safety in manufacture

So that the device assembled to function normally, and also does not pose a danger to others and the operator, it is necessary to check it accordingly. Before starting, verify the reliable attachment of all connections, especially as welded seams.

When conducting tests, you will need to make sure that there are no people and animals around the device at a distance of at least 50 meters, which will avoid a possible accident.

Varieties of mowers for the tractor

The versatility of the tractor is proved by the time and a series of generations of successful farmers. The weighty aspect, due to which it is implemented, is the installation of attachments. Among the numerous adapters for the tractor, it is worth noting a mower that simplifies the mowing of herbs and the harvesting of feed on large areas. We will talk further about their diversity, device and manufacturing at home.

Tractor braids can be classified according to several criteria.

By the method of aggregation with the main traction mechanism:

  • hinged. installed in the front or feed part of the tractor;
  • half.wow. like the previous ones, guarantee an accurate cut in the fields with complex geometry;
  • trailed. are connected through the trailer mechanism. Designed for a continuous mowing.

Based on the purpose:

  • classic tractor mowers for beveling grass;
  • Plush braids-are used to prick green mass and its simultaneous rolling or spread;
  • Milfly mowers-except the above designated, crushes hay into a small fraction.

Depending on the working mechanism:

  • manipulatory;
  • Segment (segment-none)-excellent for agricultural cultures with a low cut (rice, soy, peas, wiki);
  • segment-paltsev-mush crops with rotating knives, which pick up the stems from the contradictory plates;
  • Bespaltsev. for the harvesting of the grass there are special paired segments;
  • rotary (they are also disk or drum). the most productive, adapted to silo crops.

In terms of the number of cutting organs of mowing organs, there are one and multi.bass (from 2 to 5), which can be installed in front, back and assembly of the tractor.

Rotor braids for the tractor: device, principle of action and popular models

Used for areas in several ha, as well as for crops, the yield of which exceeds 200 c/ha. Constructively are a support skeleton. a frame that carries working mechanisms. With this design of the hayfield for the tractor, these are knives fixed on hinges, the rotation of which occurs by belt gear (cardan, toothed and conical). Often combine additional opportunities. collecting a hay in a roll or disposal of organic mass.

Among the popular discs for the tractor, it should be noted:

  • KRN-2.1. per hour mophes the grass from an area of ​​29 hectares, moving at a speed of 15 km/h;
  • KDN-210-connects to the rear HOMA and is designed for small territories;
  • L-501-01-perfect for the lawn on a sports ground or in the park. Works at a speed of 8 km/h.

It is impossible not to mention everyone who is loved by the KTM-2 rotary mower, which we will consider in details.

Rotor mower KTM-2

Indispensable in gardening and utilities. Thanks to a significant capture width and high accuracy, the cutting of the usual “Belarusian” or “Alttrak” into a lawn tractor capable of cleaning the area up to 7 hectares. Together with the Ugose, solves the problem of processing green mass.

  • aggregation with a tractor through a 3-point hitch;
  • The combination of compactness is 1.3 x 1.17 x 0.63 m with a wide capture (1 m);
  • 45 mm haircut height;
  • The optimal transport speed is 8 km/h for a summer house or garden;
  • Light weight. 100 kg.

The rotary mower is a universal device that can effectively get rid of weeds, thickets, bushes and other unnecessary plants. It is ideal for hay harvesting, which makes it extremely in demand. If you have the necessary materials, it can be made independently, which will avoid expenses on its store analogue.

Varieties and features of mowers for a mini.vector

Processing of the personal plot has always taken a lot of effort and time. Therefore, after many farmers and owners of personal plots began to actively use such a universal equipment as a mini.tractor in their farm, then the need for hinged equipment for such an unit increased several times. Today we will talk about the mower, what are they and what are their features.

Braids. devices that are widely used in agriculture when harvesting or harvesting feed crops. Such equipment allows you to take care of your site and lawn and is very convenient to expect.

By the type of location of the knife, they are divided into:

The most popular mowers are segment and rotary. What are their features, and what qualities they possess, we will now tell you.

The course of work

A homemade mower is made as follows:

  • A metal sheet is prepared for the construction of the rotor, from which two disks are cut with a diameter of about 40 cm. To save on the purchase of the material will allow the use of an alternative option in the form of a bottom from an old bucket or barrel.
  • The axial shaft will serve any metal pipe with a cross.section of about three cm.
  • To ensure the rotation of the structure, you will need to plant the shaft on the bearings. Subsequently, discs are put on it, to which cutting knives are welded in advance.
  • Then, using the same welding machine, the mechanism joins the metal frame.
  • The braid is equipped with a protective casing, which will ensure safety during work.
  • At the end, the shaft of the structure is equipped with wheels.

Such a device will make the mowing of plants at a speed of about 10-12 km/h. When accelerating the movement of the grass, it will turn out to be more crushed, in case of unhurried work. a holistic. The device is ideal for cleaning the garden or household territory from weeds.

In this article you had the opportunity to find out how you can make a rotary mower with your own hands. In fact, as you have seen yourself, there is nothing particularly complicated in this process, therefore, even a professional can easily cope with this kind of manipulation.

However, if you do not want to take risks and start with a small one, we bring to your attention a manual gasoline mower for the grass.

The most important thing in the manufacture of a rotary mower is that you are extremely carefully repelled from our advice on both regarding manufacture and safety.

In the domestic agricultural machinery market, a whole mass of effective solutions are presented for working in household plots and laws care. The highest demand today is rotary mowers. Such devices are characterized by high performance, ease of operation, the ability to install on a tractor and a one.axle tractor. Due to the special simplicity of the design, if desired, a homemade

Let’s look at the design features, the principle of functioning and methods of independent assembly of devices for beating grass, harvesting weeds and law care.