Dog Book On The Street
In order to choose the right ready booth for dogs or make a dog house with your own hands, we should measure:
-dog body length:
-dog chest width:
-the distance from the ground to the dog’s lower sternum.
DRAWINGS OF THE DOG BOOK
HOW TO MAKE A DOG
BOOK OWN HANDS
And now we take a sheet of paper, a pencil and a ruler. Choose a booth design that you like and customize it for your dog.
What should fit? What size should be doghouse?
1. The width of the box should be equal to the length of the body of the dog (better lying on its side with legs extended)
2. The depth of the box is the length of the dog’s body.
3. Height of the booth – height of dog at withers 10 cm.
4 The roof can be made gable, shed or flat, then the dog will lie on it.
5. Enter the booth try to make the side, not in the center.
The size of the opening should be equal to the width of the dog’s chest. The upper edge of the hole should be at the height of the withers. Lower edge at the level of "clearance" of your dog.
It is necessary to build a booth such that it keeps the warm air from its breath as best as possible. And did not miss drafts and precipitation.
Therefore, too spacious booth is also not suitable for regions with cold winters, as well as close, in which the dog will not be comfortable.
Very good to do in the booth platform for walking. For a large dog, the walking size can be from 3×3 to 3×5 meters.
In regions with a harsh winter, it is better to warm the dog box. Insulation should be chosen taking into account that the dog box is low and in winter it can be flooded from below.
Therefore, be sure to put sheepdog box to a height of from the ground, about 20-30 cm. In winter, remove snow from the booth.
Below the booth can be insulated with insulants not susceptible to moisture absorption, and the upper part can be insulated with mineral wool.
The roof of the booth is also better to warm and cover with roofing material, metal tile or other material that will be in harmony with the design of your house and buildings on the site.
We must-to measure:
-length of a body of a dog:
-width of a breast of a dog:
-distance of the dog
HOW TO MAKE DOG
BOX THE HANDS
And now we take a sheet of paper, a pencil and a ruler. I love you to choose your box.
What should conform? What sizes should be a doghouse?
And here such:
1. The body of the dog should be bored.
2. Depth booths-to length of a body of a dog.
3. Height of a box – growth of a dog in withers 10 see
4 Roof can be made gable, single or flat then flat dog will be on it.
5. Try to make sideways, not on the center.
The size of a breast of a dog should be equal. Top bleed apertures should not be on the ball. Bottom bleed clearance at a level ‘clearance‘ your dog.
It is possible to detain warm air from its breath. Also did not pass drafts and atmospheric precipitation.
It is not necessary to have a comfortable box.
Very well to make in a box tambour for walking. For the big dog the size of walking maybe from 3×3 up to 3×5 meter.
It is better for warming. It can be exposed to flooding at the bottom.
If you want to clean the snow, it’s about 20-30 cm.
At the bottom of the box can be warmed heaters not subject to absorb mineral cotton wool.
It is better to keep your house on the floor.
Here you will find a photo album of industrial and private manufacturing.