gas trimmer how many oil per liter. Preparation of fuel mixture for twostroke engines

What kind of oil to pour into a benzotrimer

Lubrication of gears must be carried out regularly in accordance with the recommendations set forth in the operational instructions of the model used. You need to do this also if:

With the constant use of the trimmer, its transmission mechanism experiences a load from grass, dirt sticking on knives or due to changes in torque. Lubricants must be selected high.Quality to extend the service life of the gearbox.

Used types of lubrication

When choosing lubrication, it is necessary to take into account the following factors:

Famous manufacturers, for example, STIHL, Husqvarna and others, in addition to trimmers, produce lubrication for them. Such products not only reduces wear, but also protects the metal of gears from corrosion. Therefore, for motorcycle from these brands, it is better to use their lubricants.

For different models, lubrication is consumed in different ways. This is determined largely by the intensity of the use of motorcycles and heating the transmission mechanism. It is believed that the lubricant is enough if the temperature of the gearbox during operation does not exceed 40 ° C.

By consistency, lubricants for a trimmer can be:

In terms of composition, the following types of lubricants are in demand:

• Graphite, significantly reducing friction, as a result of which the rotation of the gear improves;
• Lithium, which are also an excellent anti.Corrosion composition, saturated with increasing the wear resistance of metal with additives without harmful substances;
• Universal, containing high.Degree mineral oils and improving operational characteristics components.

An example of suitable lubricants are: Champion EP-0, Gear Grease Oregon, Oleo-Mas, Azmol 158, Litol.24

You should also pay attention to the advice of manufacturers on this issue and use the materials they offer. You can buy them at specialized retail outlets

A lubricant Champion EP-0 Universal 120 gr

The algorithm for self.Lubrication of the gearbox

To make lubrication of the gear ratio, its preliminary disassembly is not needed. A special hole for these purposes has already been laid in the device (it is shown in the photo below)

In addition to gears, when lubrication, you need to pay attention to such elements of the mechanism:

Pour oil or apply solid grease through a tavniper closed by a screw. At the same time, they perform actions in the following sequence:

• The gearbox body is cleaned of dirt and adhering grass, especially thoroughly the plot around the plug so that the garbage does not get inside the mechanism;
• Using the appropriate tool (often it comes with a trimmer), the cork is unscrewed;
• The selected lubricant is introduced from the tube into the open technological hole, or using the syringe, as shown in the photo further;
• Screw the cork in place.

If for any reason the gearbox needs to be disassembled, then the old lubricant must be completely removed from the entire surface of the gears and housing, shaft, and only then use the new. The disassembled mechanism is conveniently lubricated with solid compositions.

The entire reducer lubrication process is demonstrated in the video:

Lubricating the gear node is required at least once during the year, but it is recommended to do this every 20 hours of intensive use of motorcycles. If the first signs of malfunctions with the mechanism appear, then you need to make lubricants as quickly as possible.

How to dilute gasoline with oil for a trimmer. Step.By.Step instructions

Fuel mixing occurs taking into account special proportions.

If you dilute the fuel mixture with an insufficient amount of lubricant, this will lead to the Rapid wear of the parts of the gas troops

The optimal ratio of oil and gasoline can be viewed in the instructions for the trimmer. As a rule, it is equal to 1:50, 1:40 or 1:25.

It will be forbidden to dilute gasoline with a lubricant component in a suitable container: to do this immediately in the fuel tank is prohibited. If you ignore this rule, the work of the motor can be unstable, as a result of which the tool will quickly fail. To dilute the fuel mixture, do not use plastic canists or bottles, since gasoline is able to dissolve this synthetic material. Fuel mixing order:

• Pour a liter of gasoline into the container (optimally. Metal canister).
• Add half the necessary oil proportion.
• Mix the liquid thoroughly, away from sources of open fire.
• Pour the rest of the lubricant into the container and mix the mixture again.
• Pour fuel into the fuel tank of the trimmer.

Work should be carried out by wearing a respirator and rubber gloves. For the convenience of transfusion, you can use the watering can. The finished mixture should not be stored for more than 3 months, it is better to dilute exactly as many fuel as you need for the work planned in the near future. Mnight mixing oil with gasoline, be sure to choose high.Quality, buy it better at proven gas stations.

Proportions of oils and fuel

The calculation of the ratio of ingredients for preparing a dressing for a trimmer should take place taking into account the recommendations on the packaging from the oil. The standard proportion is 1:50. Any quality oil for two.Stroke engines is allowed to use.

Features of the gas station

Depending on the engine device, motorcycles are divided into two.Stroke and four.Stroke. In the first case, the piston in the internal combustion engine makes 2 moves in one working cycle, and in the second case. 4 moves. Differences in principle of operation of the engine determine different approaches to refueling the trimmer.

Two.Stroke engine refueling

In ordinary household models, motorcycles are used, as a rule, a two.Stroke engine. Very high power and abuse are not needed for benzokos, so it is quite suitable for performing the tasks. In addition, this engine is much cheaper and simpler, but it is refueling with a fuel mixture, which consists of oil and gasoline. Such fuel is poured into a carburetor and is supplied to the cylinder in the form of oil-Benzine fog. Thus, the oil provides lubrication of all the necessary parts, and in the process of operating the engine burns together with gasoline. However, the combustion of this mixture is accompanied by the release of caustic odor and smoke, which increases the toxicity of exhaust gases.

Motokos refueling with a four.Stroke engine

Four.Stroke engines are used in professional motorcycle models. They have high power and can work for a long time without a break and refueling. As fuel, they also use gasoline and oil, but they are poured into different tanks. So. The oil does not participate in the process of combustion, so the exhaust gases are not so toxic.

Butter

For trimmers, a special two.Stroke oil is made, on the package of which there should be a note “2t”. Car, and even more so, transmission oil is strictly prohibited. Two.Stroke oil in three types is produced:

It all depends on what substances make up the oil base. Mineral oil is the cheapest and unreliable. Its use is justified only in household class trimmers, which work for 30-60 minutes a day with large interruptions. Most manufacturers of motorcycles of this level indicate that TS-W3 class oil is suitable for the engine. This means that you can use mineral, synthetic and semi.Synthetic oil 2t.

It is advisable to buy only those grades of oil that the manufacturer recommends for a professional class motorcycle. This is usually semi.Synthetics and synthetics with special additives. Manufacturers mark the oil in letters:

• That. For two.Stroke engines with a volume of up to 50 cubic centimeters;
• TV. For engines 50. 200 cubic centimeters;
• TS. For engines of motorcycles, snowmobiles, etc.D.

In motorcycles, if the type of oil is not indicated in the instructions, you can fill in all three modifications. How much oil is added to the fuel of the trimmer depends on the brand of the tool and the quality of gasoline. Also, on the packaging with butter, the letters FA, FB, FC, etc. May occur.D. They show the level of smoke. The closer the second letter to the beginning of the alphabet, the more smoke stands out during combustion. As a rule, high.Quality oil has very little. This indicator does not affect the choice of oil. Important than the inscriptions “Self Mix” and “Pre Mix”. The first phrase means that the oil dissolves independently, and the container with the second mixture must be shaken several times. The best oils in the market are STIHL, Shell Helix Ultra, Oleo-Mac, Lukoil.

How to choose for benzo.Cakes?

For two-stroke engines, motorcycles use gasoline AI-92 or AI-95 grades. Most often the first of the named. This is necessarily available in the technical passport of the product. If, for some reason, it is not known exactly what gasoline the trimmer should work on, you can pick up both gasoline brands in action in the action. Global changes in the engine will not happen from this, but to determine which gasoline this or that model of the unit “loves” more, according to some factors it is possible. This will be shown both developed power, acceptance, and heating the engine, as well as its stable operation at all speeds.

But with the proportions of the oil to a certain volume of gasoline, it is much more difficult to determine. In this case, at least you need to know about the manufacturer of equipment. And already for standard proportions for this manufacturer, choose a proportion for a specific model, taking into account the type of oil.

For example, for Chinese low.Power trimmers, two ratios are mainly used. 1: 25 or 1: 32. The first is for minerals, and the second is for synthetic oils. We have already said previously about the choice of standard proportions for the gasosos of European and American manufacturers in connection with the type of oil. In the class of oils for household trimmers, you need to use TV oil according to the API classification. For more powerful. CU class.

About what the ratio of gasoline and oil is necessary for benzokos, watch in the next video.

Trimmer, or Benzokos. A tool that cannot be dispensed with in the household. Over, its reliability, efficiency and long life depend on many factors. For example, fuel quality. This means that you need to correctly select oil for a trimmer, follow the proportions when adding to gasoline and the rules for refueling the device.

Motokos oil. How to choose in what proportions to breed

Many of you have a benzo tool in the household, for example, in a private house you can not do without a chainsaw. You understand, the harvesting of firewood for the winter is useful at a construction site and repair and in general, this is a very necessary tool. If the country house also has a decent area in size, then to combat grass just needs a trimmer or motorcycle, which also work on gasoline.

Of course, they can be bought and electric, but not everyone likes to pull a 30-meter extension cord to dig an area overgrown with grass knee-deep. Therefore, most people prefer to work as a gasoline tool. As you know, you need to add special oil for two.Stroke engines to gasoline. We’ll talk about it, because this is a very important aspect, if you do not add oil and add in the wrong proportions, then your engine will quickly “grunt” and your path will lie to the service center. To avoid all these troubles, add only high.Quality oil and in the correct proportions.

The most popular for chainsaws, motorcycle and trimmers is the products of the famous company STIHL. It is sold in 2 packages. 1 liter and 100ml. For those who work hard, a liter bottle is suitable, and a small bottle is enough to “drink” at a time. A capacity of 1 liter costs 250 rubles, and for 10 ml. 60 rubles. If you take a large one, then the savings are obvious.

Oil is added to gasoline in a proportion of 1 to 50, that is, for example, add 100 ml per 5 liters of gasoline. As you can see, a small bottle is great for 5 liters of a mixture of gasoline for refueling a chainsaw or trimmer. On a large bottle on the side there are special marks by which you can determine how much oil was poured out of the bottle. If you bought a large 1 liter bottle, then buy a 20ml syringe in a pharmacy. Very convenient. 1 oil syringe per 1 liter of gasoline.

Experts advise using branded oil for their technology, it is perfect, since it is developed and tested precisely on the instruments of calm. I note that Stiel has its own brands, such as VIKING (popular models of gasoline trimmers). For them, also use Stilevsky oil and there will be no problems at all.

If you have made a gasoline mixture more than you can use it, then it is best to store the remains in a metal canister or in a glass container. In no case do not store the mixture in a plastic bottle. Of course, if you consume the remains after a couple of days, then you can pour the remnants of the mixture in a plastic one and a half, however, if the mixture is stored for a long time, then either a canister or a glassotter. The thing is that the gas mixture corrodes the plastic bottle, microscopic plastic precipitation appears in the mixture and this is very bad for the engine. Keep this in mind if you want your tool to work for a long time and without problems.

The second most popular brand of oil is a non.Bonding hokesworm. Of course, if you estimate it, after all, STIHL chainsaws use more people, at least all my friends and their friends use only them in their work.

However, there are those who do not have souls in the Husqvarna tool and I understand them, since I personally do not see much difference between Khuskvarnaya and Shtil, and one and the other tool is very high quality. But I saw satisfied owners of Husqvarna chainsaws. They say, saws are just super. I myself did not saw, however, I always listen to the opinion of people. So, if you have a gas.Based gas tool, then it will be better for him to use special branded oil. Although nothing terrible will happen if you dilute the gasoline with a signs. But since the manufacturer recommends using only its products, we will do so.

On sale you can find liter containers. Black stylish bottle, the same marks on the side, and with a person (to know how much oil was cast from a bottle). As for me, absolutely identical quality. There is such a bottle of 270 rubles, a bit more expensive.

Both that, and another oil, the cost is approximately the same, each is diluted in the proportion of 1 to 50. So feel free to buy anyone, of course, it is better to take the oil of the brand you have a tool. Then everything will be perfect, as the manufacturer advises. Good sawing, spinning grass and let your benzo.Tool work for a long time without breakdowns.

Standard proportions

Often with the proportions of oil and fuel for reliable operation of motorcycles, problems arise. The reason for everything is absolutely different information in the sources. You may encounter the difference in data in terms of a dozen units, but it happens half. Therefore, you involuntarily think about how many oils per 1 liter of gasoline are needed: 20 ml or all 40. But for this there is a technical passport for the product that you purchase in the store. There should be a description of the device, instructions for its operation and instructions on the rules for preparing the fuel mixture.

First of all, it is necessary to take into account the information that the manufacturer recommends, since in the case of failure of the motorcycles, you can make your claims to him, and not a third.Party source. If there is no instructions in the passport, and even more so if the passport is missing, then we recommend looking for another trimmer model from a more reliable seller.

For all other cases, when you have a benzo.Cave model in your hands and there is no way to find out its technical features, there are standard proportions of the most likely components of the fuel mixture for a two.Stroke engine. Basically, these units use AI-92 gasoline and special synthetic oil, which contains a solvent for better mixing with fuel. Such oil evaporates slowly and has the ability to completely burn in the cylinder, without leaving a car.

The standard attitude of synthetic oil to gasoline is 1: 50. This means that 100 ml of oil needs 5 liters of gasoline, and in accordance with this, oil consumption per 1 liter of gasoline is 20 ml. Knowing the amount of oil required to dilute 1 liter of fuel, you can easily calculate any norms when preparing fuel for a trimmer. When using mineral oils, the ratio of 1: 40 is most often standard. Therefore, 1 liter of fuel will require 25 ml of such oil, and 125 ml per 5-liter canister.

During the work of benzokos, it will not be difficult to determine and adjust the actual amount of oil, the right specific model to a person who has a little experience in the operation of such a technique. You should only pay attention to exhaust gases (their color, toxicity of the smell), stability of the cycles, engine heating and developed power. About what consequences from the incorrect proportions of mixing gasoline and oil can be expected is lit in another section of the article. There are motorcycles operating on gasoline AI-95 brand gasoline. It should also be taken into account.

Selection of gasoline for a trimmer

For some reason, everyone prefers to choose a brand of gasoline for motorcycles at their discretion. This is an erroneous approach, because, first of all, it is necessary to carefully study the instructions where the manufacturer’s recommendations for the choice of fuel are given. But this is also not a guarantee, since unearthly fuel can be sold under different brands (which differ in many manufacturers), which are significantly different in composition. Therefore, it is necessary to FOCUS precisely on the main characteristics in order to choose gasoline for a specific trimmer model.

Manufacturers of benzo-tools recommend using AI-92 gasoline brand for work, but for more expensive types you will need fuel with a higher octane number-AI-95. Any brands, in the marking of which the number 90 and less appear, is not suitable for benzos, since they lead to Rapid wear. The problem develops due to unscrupulous fuel manufacturers, which are sold under the guise of 92nd a completely different brand. The following situation develops:

• The passport for gasoline equipment has a recommendation for the use of gasoline with an octane number of at least 92;
• The conscientious owner goes to a gas station, where the lowest price and with a clear conscience floods such a fuel in a motorcycle;
• As a result, the service life is reduced, since often under the guise of AI-92 AI-80 and AI-76 is sold.

To avoid such a situation, you need to select one gas station, where the proven gasoline is sold (this can be determined by the reviews of regular customers). It is also important where to fill the fuel after the purchase. For this you need to use only metal containers (plastic. Prohibited).

The option is preferred when it is possible to buy gasoline for a high.Cleaning trimmer specifically for garden technology. Then you can be confident in its quality and protection against fakes.

The result of calculating the fuel mixture:

To make it more convenient to measure the desired volume of oil in milliliters use a medical syringe of a larger volume, it costs inexpensively, sold in any pharmacy. Or use any measured container container.

Our calculator will help you count the desired proportion for refueling any benzo tool, for example: boat engine, chainsaw, trimmer, lawn mower, etc.D. In other words, you can independently and freely calculate the correct ratio of gasoline and oil for two.Stroke engines. Mixing instructions in the photo below.

It is important, before starting the calculation, read the instrument operation instructions, in particular with points: refueling volumes, the ratio of the fuel mixture. These data will be initial for the correct calculation.

For your convenience, the resulting result can be printed on a printer by clicking the “Print” icon. We will be happy with constructive Комментарии и мнения владельцев and reviews regarding the work of our service.

Keep in mind that the gas.Instrument.Tool has a period of running and the gasoline/oil ratio differs from the recommended.

The ratio of gasoline and oil for a trimmer table. First launch and running.In gas.Cubs

Hello! Acquired the PRORAB 8406 trimmer 1. How to make gasoline with oil correctly and in what proportion? I did not find the original oil from Prorab, I bought Hungsvarna HP oil. In the instructions for the trimmer it is written from third-party oils, you can use the oil mif \ 4 class oils, API TC-TB. In the case of using another brand of oil, the proportion of the fuel mixture does not change. Standard proportion of the mixture 1:25. But in a specialized store “Specialist” that Hungsvarna HP was sold to me, I urgently advised to dilute at 1:50 (as it is written in oil). Actually the question: if the instructions are written to dilute the oil by 1:25, and 1:50 is recommended in oil, then in what proportion to breed? And 1:25 is how much? 40 ml? I will not turn off the engine if I scout at 1:50? 2. How to properly run the engine? In the instructions, in addition to starting and disconnecting, nothing is written. Maybe you don’t need running.In? I read that there are such trimmers that can work immediately after the purchase.

Do I need to lubricate the gearbox before work or there is already a factory lubricant? I hope for your help, thanks!

1) Gasoline is always divorced with oil in the proportion as indicated on the bank with this oil! With two.Stroke products (benzotrimers, chainsaws, etc.) You can use any oil for two.Stroke engines, except for boat two.Stroke engines. It is advisable to use oil from normal stores, where the probability of buying fake oil is minimal. It is better to take Husqvarna or STIHL oil. STIHL oil should be with a sealed neck. Beware of fakes. There is a risk of spoiling the piston immediately. 2) driving two.Stroke products is not done! Please remember this! All two.Stroke products are high.Speed and love exclusively work on full gas! No half.Gases are permissible! This leads to incomplete exhaust and shifts with oil sediments of the wall of the piston. As a result. Bullying piston. So the full gas and every 25-30 seconds are discharged gas for 1-2 seconds to let the product rest and return to the normal temperature regime. 3) a gearbox in motorcycles with a straight shaft must be scored by a new grease every 20 hours. Oil from there comes out naturally during operation. This is done so that dirt, dust, etc. D. So if you do not want to get to replace the gearbox, score special gear lubrication every 20 hours. It is not difficult and the whole operation takes no more than 3 minutes. Lubric tubes are sold in each store with garden equipment and cost from 100 to 300 rubles. 1 tube is enough for 3 years. —- The concept of running the tool comes down to working with incomplete load during the production of the first two or three fuel tanks. For example, during a mowing not thick, low grass or sawing dry, not large wood. In no case should you run into the instrument at idle by burning a few fuel tanks. As a result of such running.In on the Windows of the cylinder, a carbon carbon fumes form on the piston and in the muffler, which negatively affects the engine resource.

Trimmer, or Benzokos. A tool that cannot be dispensed with in the household. Over, its reliability, efficiency and long life depend on many factors.

For example, fuel quality. This means that you need to correctly select oil for a trimmer, follow the proportions when adding to gasoline and the rules for refueling the device.

See also: Volkswagen Crafter 30 2.5 TD MWB L2H2 4DV. Van, 89 l.S, 6MKPP, 2006. 2011.In emulsion or condensate in the engine (determination of a malfunction)

How much oil is needed per 1 5 liter of gasoline?

Oil proportion

This means that on 5 liters of gasoline need 100 ml oils, And in accordance with this, consumption oils 1 l gasoline equal to 20 ml. Knowing the quantity oils, necessary for dilution 1 l fuel, you can easily calculate any norms when preparing fuel for a trimmer.

Obtaining a mixture

How much oil is pouring per liter to get high.Quality gasoline mixture? It would seem that there is nothing complicated in mixing two substances. The preparation of the mixture is often complicated by the fact that in various sources, various information is indicated. For example, the instructions indicate the proportion of 1 to 40, on the fuel tank of the trimmer 1 to 25, and on the canister with oil 1 to 50.

There are a number of requirements for how to dilute. Do not add too much oil. This leads to a decrease in ignition characteristics. As a result, the devaluation of the efficiency of the power unit occurs, and the general decrease in its resource. In case of oversaturation of gasoline mixture with oil, soot sediments (ventilation Windows of the cylinder) will form on the inner surface of the walls of the engine. This is fraught with the formation of a nap on the piston.

Neither oil starvation, nor excess lubricant on a gasoline basis are a good basis for prolonged ICE operation. For a trouble.Free prolonged operation, the same number of components is necessary. Breeding is best done using the same measured tools to exclude unnecessary errors.

How to calculate, let’s say how much oil is pouring per 1 liter of gasoline with a required ratio of 1 to 50? To do this, we transfer the volume of gasoline into milliliters 1l = 1000 ml. Accordingly, to achieve a ratio of 1 to 50 thousand, they are divided into fifty. Only 20 g of oil will need one liter of gasoline. Someone measures the oil with a 20 cubic syringe, but for such purposes there is a special measured spoon, which sometimes comes with oil from some manufacturers.

For ease of calculating the ratio of oil and gasoline, we bring the table https: // cmetnik.Ru/oil/

Assembly of a chainsaw on the example of Fubag FPS 56

Like most analogues, the chainsaws are delivered in disassembled form: case, separately tire and saw set. In addition to the main parts, the kit includes: a set of tools, a container for a gasoline mixture, a tire cover, a tire emphasis, a sawing file and reliable protective glasses.

Everything is clear with the kit. Let’s move on to the assembly:

We shift the protective casing towards the front handle to make sure that the chain brake is turned off.

Install the cutting link (for the fubag fps 56 chainsaw it is included).

Turn the chain on the chain wheel, and at the same time install the tire on the saw housing.

We check whether the direction of rotation of the saw chain is installed correctly.

How to breed gasoline with oil 1:50 properly

Install the casing of the chain on the main file of the saw and manually tighten the nuts.

We adjust the tension of the circuit, turning the tension screw until the connecting link touches the lower side of the guide.

Raise the end of the tire and finally tighten the nuts.

Manually check the uniformity of rotation and the degree of tension of the saw.

If the chainsaw has a gas stiff system, such as the FPS 37 saw model, then the assembly process will take no more than a minute. For this you need:

Put the tire and chain on the hairpins of the chainsaws in the correct way (cutting teeth should be directed in the direction of movement). 2. Install the lid. To properly install the lid adjust the position. Pins on it so that they enter the holes of the tire.

Put the screw emphasis and tighten a little until the tire and the chain do not dangle, but there was some freedom to adjust the chain stretch. 4. Adjust the chain stretch with rotation of the wheel.

Put out the emphasis and tighten the lid, ensuring reliable fixation of the equipment.

It is not necessary to pull the chain to the stop, because soon it can stretch out again. The chain should have a small supply, sag slightly. It’s not difficult to check with your hand. Ideally, if it lends itself to a millimeter from the tire.

Tire of chainsaw

An important part of the chainsaw is the tire. It is on its serviceability that the performance and quality of the device’s work largely depends. The tire needs regular cleaning.

• Remove the guide tire and remove wood dust from the tire groove
• Clean the lubricant
• Provide the lubrication of the front of the toothed gear from the opening at the end of the tire

Make sure of oil leakage. Check the tightening of the mounts and the integrity of the main parts, the working condition of the joints of the handles and the fastening of the guide tire. Only after that start work.

So that the tire does not wear out, it must be turned over from time to time. The guide should always have a perpendicular profile. If the tire still has to be changed, then use the bus with the parameters that the saw manufacturer recommends. This will extend the service life and saw, and the entire saw.

Periodically, you also need to check the chain wheel for the presence of cracks and traces of wear. If they are found, the part must be replaced. Put on a new chain on a worn wheel, or vice versa cannot!

What manufacturers recommend?

In the photo above the oil that I use to refuel my tools. If you look from the back, then the label has information about the preparation of the fuel mixture, but it is quite blurry.

The proportion can be from 1:25 to 1:50 depending on the operating conditions and the recommendations of the tool manufacturer. Good, it means before preparing the fuel mixture for my mower I have to see the proportion in the instructions.

I have a Chinese braid, as well as many, I open a document and see the following.

Oh how. The manufacturer of my mowing sends to watch the proportion on the oil label. In general, everything is as always, some veiledly recommend using only their proprietary oil and “pull” for it in three roads. This is what STIHL does.

Others generally relieve themselves of all responsibility shifting it to the manufacturer of the tool, as in the case of my mowing.

How to mix

If you do not have a special measuring canister with divisions that are included in the set of the Trimmer that deserves attention, or such a container is lost, then use any suitable container. Better glass or metal. Plastic can also be used, but you need to choose a bottle with hard walls.

The capacity of the vessel should be a multiple of 1 liter. You can take a bottle and 1.5 liters, but practice shows that it is not very convenient. You also need a medical syringe, preferably 20. 50 milliliters. First, gasoline is poured into the container, then an accurate amount of oil is added (by volume). The procedure cannot be changed.

Secrets of 2 stroke engines oil x gas mixture

If you have Pre Mix oil, then you need to close the bottle or canister and turn it upside down several times and shake it hard. If Self Mix oil, then it will dissolve on its own. The prepared mixture must be used throughout the day. If you know how much fuel is the trimmer spent on a certain amount of work (or time), then calculating the amount of the mixture is not difficult. Otherwise, before each refueling, dilute the new fuel so that the minimum amount remains until the end of the work.

How to prepare a fuel mixture for a trimmer

But such results are real if you know exactly how much oil is added to gasoline for a garden trimmer. The fact is that two.Stroke engines operate on a mixture of gasoline with butter. The fuel enters the cylinder, burns there, creating a working effort on the piston, and that part of the oil that did not have time to ignite, lubricates the moving parts of the piston group. When preparing a mixture for a trimmer to a liter of gasoline, it is necessary to add a strictly defined amount of oil. If there is too little lubrication, then the friction force will become too large and the motor will jam, and in the case of too much, the oil will fill the candle and the engine will staller. Also, with excess oil, the engine power will decrease, it will not develop the required revolutions and smoke much.

When compiling a fuel mixture, it is necessary to calculate how much oil is needed per liter of gasoline, based not only from the standard proportion, but also from which brand of gasoline and oil is used. In the case of two.Stroke engines, it is very important.

The correct selection of oil for benzos

Two.Stroke engines are filled with a mixture of unhealthy gasoline and oil with 2t markings. In this case, you need to use the recommended gasoline AI-92. If you apply a brand with a higher octane number, the temperature of the flash and combustion will be higher, the valves will burn out prematurely. The same applies to the clock. The recommended composition is not the most expensive. But the use of another brand is unacceptable. Valid will change, this will lead to insufficient lubrication of ordinary products made without grinding high accuracy.

If the oil is added with excess, incomplete combustion will lead to the formation of a soil and an excessive exhaust into the atmosphere. A rich mixture is harmful to the engine. For a four.Stroke engine, the oil is poured separately from gasoline. It washes nodes, cools, reduces friction. In the process, the oil is polluted and after 50 working hours should be replaced. What kind of oil is poured into a benzoocos, indicated in the passport. The composition should have a 4t mark with a viscosity of 10w40.

The best oil for any engine is the recommended. However, Shel Helix Ultra oil is world famous. The company has been developing a new technology for obtaining synthetic oil from natural gas for 40 years. Pureplus technology made it possible to obtain an improved composition of basic oil. On its basis, with the addition of the necessary additives, leading manufacturers receive recommended oils for their equipment.

The choice of oil primarily depends on the recommendation of the manufacturer. So, oil for benzo.Chatting oil is used only corporate. The same oil is suitable for the brand of a knight, as the engines in the brand brands. There is an opinion of experts, oil of any manufacturer, designed for one type of equipment, is suitable for use on all brands. But if possible, it is better to use the recommended.

The path of oil recommended for the Khuskvarna benzocyes was investigated. The company has no its own production, only the spill. The product purchased wholesale is spilled into small containers, marked and enters the retail network. Perhaps the composition of the oil at the manufacturing stage added exclusive additives for Khuskvarna.