- Farm Machinery >
- Hay & Forage >
- Grass mower
Grass mowers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Working width: 1.45, 1.75, 2.05, 2.35 m
Power required: 25 ch
PTO speed: 540 rpm
FIORE is a double-bladed sickle bar with proven versatility that is ideal for mowing all kinds of forage crops and multi-grass lawns. The exclusive double blade system starkly cuts forage in all conditions of use. It ...
Working width: 3.04, 2.62, 2.2 m
Power required: 55, 45, 35 ch
Swath width: 1.1 m - 2.1 m
... sufficient residual assimilation area remains for the grass to sprout again more quickly. If the ground is not level, it is essential that the mower can adapt well to any bumps. With our NOVACAT ...
Working width: 0 cm - 140 cm
Power required: 8.7, 11.9, 6.8, 8 kW
Weight: 278, 297, 289 kg
... 622 PowerSafe® is a motor mower intended for farmers on small livestock farms and farms for intensive use where the much bulkier and more expensive combine harvesters could not work. Designed for mowing forage and ...
BCS
Working width: 1.2, 1.5 m
Weight: 400, 500 kg
Speed: 0 km/h - 10 km/h
HYDRO FLAIL MOWER WITH HYDRAULIC FLAP With the hydraulically opening flap of the hydro flail mulcher, large amounts of reeds and grass can be removed with ease. Another special feature of the mulcher ...
Working width: 2.55 m
The new Sarracenia front mower, with a 2.60 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...
RIBERI
Working width: 3.24 m
The new Sarracenia front mower, with a 3.20 m cutterbar, is fitted with an innovative ground tracking system that reduces the impact of the cutter bar with the unevenness of the ground and guarantees both optimal cutting ...
RIBERI
Working width: 1.65 m
The Crassula disc mower can be ordered in four models from the smallest 4-disc with a cutting width of 1.65 m. to the largest 7-disc with a 2.85 m cutting width. The advantage of this type of mower ...
RIBERI
Working width: 80 cm
Power required: 23 ch
Weight: 450 kg
... m2/h (*):2800 TECHNICAL DATA Overall dimensions:1350x1320x780 Compacting pressure:166 gr/cm2 (*) cutting conditions: grass maximum height 40cm – dry conditions – flat ground 25°
Barbieri Group
Working width: 60 cm
Power required: 5.5 ch
Speed: 1.2, 2, 3.4 km/h
Barbieri Group
Working width: 75 cm
Power required: 8.4, 10.7 ch
Speed: 1.5, 2.5, 4.2 km/h
Barbieri Group
Working width: 90 cm
Weight: 610 kg
... phases of work in small spaces, such as for mowing the grass under solar panels, in the presence of narrow access, in particularly inclined areas or of poor access. The volumes and size of the flail mower ...
PERUZZO Srl
Working width: 105 cm
The self-propelled remote-controlled flail mower Peruzzo mod. ROBOFOX HYBRID, a top-notable novelty in the world of professional shredding, it is equipped with a 28CV engine branded Briggs&Stratton with special oil tank ...
PERUZZO Srl
Working width: 1,000 mm - 1,500 mm
Power required: 25 kW - 40 kW
PTO speed: 540 rpm
The flail mower mod. FOX is used for grass cut (Mulching) and verticut on grass fields. The flail mower Fox is Engineered to be mounted on light tractors three points ...
PERUZZO Srl
Working width: 7.3 m
Power required: 140 kW - 180 kW
PTO speed: 920 rpm
... reverse-drive tractor! The ELHO Duett 7300 is the ideal mower conditioner for large fields and is designed for use with reverse-drive tractors only. Operating in reverse provides an unobstructed view to the mower ...
Working width: 1,430, 1,610, 1,026, 1,222 mm
Weight: 150, 160, 170, 180 kg
Adaptable to hydraulic loaders and tool carriers, with hydraulic capacity between 25 e 120 l/min. Front application, with attachment plate/system to be evaluated according to the operating machine standards. Adjustable supporting roller. Driven ...
CERRUTI s.r.l.
Working width: 500, 560, 1,000, 650, 800 mm
Power required: 8 ch - 16 ch
Weight: 68, 63, 105, 76, 59 kg
... rotor brake according to EN 12733 STANDARD EQUIPMENT Adaptable to any kind of two wheel tractors Front position (mower type) Rear position (flail type) Adjustable supporting roller Angular gear box ...
CERRUTI s.r.l.
Working width: 800, 1,200, 1,000 mm
Power required: 14 ch - 30 ch
PTO speed: 1,000, 800 rpm
Adaptable to any kind of 2 wheel tractor (front type) Grass cutting height adjustment with rear support roller or (on request) front wheels Rotor with Y blades or (on request) with set of hammers. Flanging attachment ...
CERRUTI s.r.l.
Working width: 1.3, 1.6, 2 m
Power required: 26, 24, 29, 34 ch
Swath width: 0.9, 1.3, 1.6 m
FPM rotary disc mowers are rear-mounted tractor mowers designed for cutting all types of grass and forage plants, mowing areas alongside roads and for public utility works. This type ...
FPM Agromehanika
Working width: 80, 100, 120 cm
Flail mower for grass, and small branches, suitables to mini-excavators with weight up to 6.0 t., with power up to 50hp. - Max. working diameter cm.6 STANDARD EQUIPMENT: Steel plat, not painted, ...
osma
Working width: 2.57 m
Power required: 50 ch
Swath width: 1.1 m - 1.6 m
The front-mounted mowers with lightweight design and the centre of gravity as close to the tractor as possible ensure safe work and excellent visibility on steep terrain. The linkage of the mowers is ...
SIP STROJNA INDUSTRIJA d.d.
Working width: 8,300, 8,600, 9,300 mm
Power required: 140, 150, 81, 96 kW
PTO speed: 1,000 rpm
... machine -Low-drag mower with cutter bar suspension system for mowing that minimises impact on the crop -Weight-optimised design and efficient drive concept for fuel saving ECO-Mode with 850 rpm The new low-drag RAMOS ...
Working width: 3,400 mm
Power required: 70 kW
Swath width: 1,400 mm - 2,040 mm
The PRONAR PDF340C disc mower is a front-mounted mower with swath conditioner mounted on the front three-point linkage. To operate the mower, the tractor must be equipped with a front ...
Pronar Sp. z o.o.
Working width: 91 cm
Power required: 5.5 ch
QUICK COUPLING:Standard STARTING:Recoil starter CLUTCH:Belt tensor SWEEPING WIDTH100 cm:SPEEDS2 + 2 ENGINE:Honda GX 200 gasoline PTO:With engage/disengage command TYRES:13.500-6 TRANSMISSION:Chain and belt DESCRIPTION A help ...
Working width: 1,500 mm - 1,700 mm
If you need to cut the grass on your acreage, it is obvious that you should use a Rotor Blade Mower from ParkLand. It ensure a beautiful result - regardless of whether the grass is short ...
Working width: 1,300, 1,500, 1,700, 2,000 mm
Power required: 18, 20, 25, 30 ch
PTO speed: 1,950 rpm
... GreenLine Flail Mower to cut your grass. Whether the grass is long or short makes no difference. The Flail Mower from ParkLand handles the task. You can easily and quickly ...
Working width: 2,500 mm
Power required: 90 ch
he perfect machine for professional lawn care: Scarifying without scalping Grass cutting Grass sweeper with brush Leaf collection. Standard equipment: Interchangeable wingtips on fan wheels. ...
Working width: 112 cm
Power required: 17.9, 17.7 kW
Weight: 638 kg
The remote controlled high grass rotary mulcher with the innovative hybrid drive concept: Electric traction drive and powerful engine. The professional machine for the economical use of extensively cultivated problem ...
agria
Working width: 2, 1.6, 1.8, 1.4 m
Power required: 40 ch - 80 ch
Weight: 435, 460, 500, 530 kg
The multi-purpose flail mower Mod TrisaR TR26 is the ideal implement for all requirements. Thanks to its patented SSA system it allows working with the best results and the highest degree of safety both on grass ...
ALPEGO S.p.A.
Working width: 0.8, 80 m
Power required: 30 ch - 100 ch
Weight: 458, 415, 353, 310 kg
The Spearhead Barrier Mower is the perfect tool for airfield, agriculture, amenity and highway applications for cutting under roadside crash barriers, fence posts, fence wires and round the base of trees. Available ...
Spearhead
Working width: 68 cm - 138 cm
... their low fuel and power requirements. Success factors -Optimum cutting and chopping quality even when tackling tall grass or undergrowth -Cut material is deposited neatly -Continuously adjustable cutting height -Robust ...
Rapid Technic AG
Working width: 2.85, 2.4 m
Power required: 61, 88 ch
PTO speed: 540 rpm
... with high comfort and efficiency of work. •Mower bar side suspension is simple, but makes the mower perfectly follow the terrain with equal pressure on the ground. •Safety spring fuse allow for tilting ...
Working width: 3 m
Power required: 82 ch
PTO speed: 540, 2,750 rpm
SIPMA KD 3025 SPRINT rear-hitched disc mower with central suspension guarantee perfect ground copying and equal cutting height across the entire width of the cutterbar. SIPMA disc mowers are machines ...
Working width: 185 cm
... for best cutting result without stripes. -Cutting height is regulated by wide support skids with rounded edge. -The rotary cutter has approved protection that prevents from stone throwing both forward and backward. -Can ...
Working width: 275 cm
... knives for best result without stripes. -Cutting height is regulated by wide support skids with rounded edge. -The rotary cutter has approved protection that prevents from stone throwing both forward and backward. -Can ...
Working width: 365 cm
... knives for best result without stripes. -Cutting height is regulated by wide support skids with rounded edge. -The rotary cutter has approved protection that prevents from stone throwing both forward and backward. -Can ...
Working width: 1,350, 1,650, 1,900 mm
Power required: 30, 40, 50 ch
PTO speed: 540 rpm
It reaps all kinds of feed plants, grass, meadow grass, heath and wild plants bordering the roads with blades rotating at a high annulus velocity and existing in both of the 2 drums rotating reversely ...
Working width: 1,626, 2,006, 2,386 mm
Power required: 40, 50, 60 ch
PTO speed: 540 rpm
... Disc Drum Mower rises up by hydraulic system. So the machine stays behind the tractor in transport position. Grass-cutting is performed on sloppy grounds after the machine is made suitable to the slope ...
Working width: 210, 120, 150, 180 cm
Power required: 15, 17, 20, 24 kW
PTO speed: 540 rpm
The KJ flail mower is a compact mower that does an excellent job. This machine is great for less intensive use, for example by horse owners or hobby farmers. The KJ is a simply built flail mower ...
PERFECT - VAN WAMEL
Working width: 60 cm
Power required: 5.6, 6.1 ch
Weight: 100 kg
The TEKNA FL620 Mower with a cutting width of 60 cm is a machine suitable for cutting even substantial grass, up to a maximum height of about 1 m, both on flat and sloping ground. It is equipped with ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AgriExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining