Hitch for a single-axle tractor with your own hands

Coupling for the plow of a motor-block with your own hands

The plough is one of the most important types of mounted equipment for the power tiller. However, the manufacturer does not always provide a coupling device in the kit. It is easy to make a hitch for a plow with a power tiller, you can use the drawings of the simplest kind. U-shaped hitch.

Depending on how much power a single axle tractor has and how much ground the plough will work, you will need a more or less solid hitch. The load on this part is always enormous, so it must be made of quality materials, especially if you work heavy soils.

Homemade Single Axle Farm Trailer

What kind of hitch for attachments and trailed implements do you use??

Making a hitch for a power tiller with your own hands

If you have your own plot at the cottage, then you are familiar with how difficult it is to dig, tear and dip. It takes a lot of effort and time. To simplify such problems, you can buy additional special equipment, it can be a single-axle tractor. A huge range of work can be done with this equipment.

It’s hard to clear snow, weed and start hoeing without a hitch. Among some of its variants is the adapter, which looks like a cart with a seat. Such an addition can turn a simple single-axle tractor into a real tractor, but it is only available in stores for a lot of money. Therefore, you can make an adapter with your own hands, as well as other varieties of attachments.

The coupler for the power tiller with his hands is the most important, indispensable node in the design. Without it you can not use a huge number of attachments. To make a coupling with your own hands, you need to carefully approach the entire process, so that the unit will be of high quality and will be able to cope with the loads.

The basis of the hitch for power tillers is a U-shaped attachment. In order to make it, you need a channel of the right size and thickness. Placed this attachment under the steering wheel.

To make the hitch mount, you need to drill a hole to fix the mounting pin and the bracket in them. Each hole must have the necessary diameter. The pin is made of high-strength steel.

To attach to a single-axle tractor, additional attachments in the form of a bracket are used. Its long end can either be folded down or up so that it does not interfere with the connected implement. The end of the arm must not touch the soil to be worked. to the menu

1.1 How to attach the drawbar hitch to the tiller?

The coupler brackets are mounted on the power harvester brackets with pins. To make the attachment secure, use M14 bolts. To mount additional equipment to the bracket you need to mount the hitch axle.

Then the axle is inserted into the hole on the outside of the hitch. Align the holes on the body of the equipment stand, screw the bolt. Next, secure the pin with an M12 bolt and nut.

Universal hitch is designed for mounting implements on the machine: potato planter, potato weeder, hoe, plow. If you have a hitch you can make fine adjustments to the attachment. The fine-tuning of the equipment facilitates the operator’s work. menu

Varieties

When selecting the hitch on the machine, one should take as a basis the most relevant type of element.

There are several versions.

• Single and double. for different hitch models. It all depends on what is practiced and in what quantity.
• Reinforced. ideal for heavy motor vehicles. It is characterized by a more impressive design with a greater length and thickness, which allows the auxiliary equipment to sink deeper into the ground.
• Adjustable, with the option to change the angle of the shaft, which can adjust the level of attachment fixation and thereby improve productivity.

If the coupling device to the motor vehicles needed modification is not available on sale or there are individual requirements for it, to create it by your own forces will not be very difficult, since we are talking about a fairly simple mechanism.

Skillful people, who make the majority of “accessories” for the motor vehicles with their own hands, perform the design of the coupling device for the trailer “pipe in pipe”, from a cross-section, from a cardan and other handy elements that remained from a variety of devices. Owners of such devices claim that it is possible to create such a unit without any problems, sharing their personal experience and drawings of the coupling device on the Internet.

Rules of installation and operation of equipment on a single-axle tractor

To install the coupling device, it is necessary to put the bracket of the hitch itself on the crampon of the power tiller. According to the diagram, it should all be secured with pins. It is not superfluous to fix the brackets with the spacer bolts M12 to 60.

To attach an additional tool to a trailed device, you need to install an axle on the bracket of the tool stand. In the hole in the housing of this coupling you must insert the installed axle. It should have an M16 thread, so that you can screw a screw into it without any problems. Having aligned the holes with a bolt and nut, you can start working.

Couplings for power tillers Neva, their types, what for what

To operate any attachment on the Neva power tiller you need to connect it to the implement. There is a special device for this purpose. a coupler. It comes in several kinds, let’s look at the features of each of them.

Coupling for APM adapter (for working with plow and dip heads)

Coupling for the APM adapter (for the Neva, Cascade, Oka, MB motor-block)

This hitch is designed for coupling different attachments to the adapter. Such as ploughs, potato harrows and ridgers. The coupling design allows you to securely attach equipment to your Neva power tillers with only three bolts.

Universal hitch

This type of coupling allows you to adjust the angle of the attachment with a bolt mechanism. This feature allows you to tilt the single-axle tractor Neva, and the plow will go perpendicular to the ground.

Since this hitch is mainly designed for the use of plows and ploughs, it is possible to install a double or triple hitch, so that you can connect several work items at once.

Universal hitch H

This is a modification of the universal hitch for the power tiller Neva. Its main difference is that it is possible not only to adjust the height of plunging, but also to change tilt angle in all planes. The maximum angle of inclination in the horizontal plane is ± 20 °, and in the vertical plane ± 27 °.

MK hitch to work with the ON-2 rear hoe and KROT plough

Linkage MK for work with bucket loader ON-2 and plough KROT

This hitch is special because it was manufactured by Mobil K Ltd. exclusively for coupling with their equipment ON-2 and Mole. Factory has thought of a separate type of coupling, which is not supplied with the kit, and bought separately.

Is it possible to make a hitch for a power tiller with your own hands?

When making a hitch with your own hands, the most correct is to choose a universal version, because 90% of the attached equipment works with this type of coupling.

It must be taken into account that there will be a lot of pressure on the coupling. Therefore, only strong materials of coarse sheet metal should be selected.

The universal hitch is based on a U-shaped coupling. For its manufacture, a square channel is best suited, it should be 40×40 mm.

Holes are made in this channel, which will serve to secure the hitch with a pin. Therefore, you should first produce a pin of stainless steel, and then under the size of the pin drill holes in the bracket.

Attach a bracket for further attachment installation. Its long part should be directed downwards or upwards, so that the connected equipment does not interfere with its movement. Do not make it too long so that it does not touch the ground.

Here’s what people write on the forums about the hitch for the Neva power tiller:

Stepan writes:

“I had a long time to decide which hitch to use. Because their construction is similar. I thought about making it myself, but I didn’t bother and bought a universal H hitch. As it seemed to me, it is the most effective, versatile and compatible with all the equipment I have. Plus I got the official warranty. Since then I haven’t had any complaints

Vasily writes:

“I bought a Mole plough to work with. Because it was one of the cheapest options, and I didn’t want to overpay. After all, they are similar and functionally the same. What was my surprise when at home I could not connect it to my hitch. Went to the store the next day to find out what the problem was. The salesman told me that he forgot to mention the special hitch of this plow. I had to buy an extra hitch. So there you have it, the proverb that the miser pays twice visually”

Cultivator hitch: mounting of plows, ridgers and ditchers

Neva” motor cultivators are applicable not only for cultivation, but also for such agricultural works as plowing, ridging, weeding, digging out root crops. Cultivators are assisted in these operations by appropriate attachments (ploughs, ridgers, duggers). Aggregation of these tillage implements with motor vehicles is carried out by means of coupling devices. If you want to buy a coupling device for cultivator please contact our dealers. You will find contacts of our sales representatives in the “Where to Buy” section. Recommended retail for coupling devices are presented on our site.

hitch Mini N (two adjustments) (.00.00) is used for hitching to “Neva” MK70, MK80P, MK100P power tillers such attachments as plough (.00.00), the CTV T planter, the CTV T planter, etc.д. Through the coupling device, you can manually select the desired working height of the attached implement, as well as change its angle in the vertical and longitudinal plane. Adjusting the coupling device is simple enough. Sales of the hitch is available at our representatives’ points of sale in the regions.

Mini H hitch (three adjustments) Mini H hitch (three adjustments) (.00.00) is the coupling device for power tillers “Neva” MK70, MK80P, MK100P. This attachment helps to attach a plough to the implement (.00.00), STV T olicensee, T olicensee, and other types of attachments. Available adjustments include changing the angle of the attachment, adjusting the height of the implement stand, and adjusting the position of the attachment in the cross-vertical.

Varieties

When selecting the hitch on the machine, the most relevant type of element should be taken as the basis.

There are several varieties.

• Single and double. used with different linkage models. It depends on what kind of practice and in what quantity.

• Reinforced. ideal for heavy motorcycles. It is characterized by a more solid structure, longer and thicker, which allows the tool to sink deeper into the ground.
• Adjustable, with the option to change the angle of the shaft, which can adjust the level of attachment retention and thereby improve work efficiency.

If the coupling device to the desired modification of motor vehicles are not available on sale or have individual requirements for it, to create their own forces will not be very difficult, because it is a fairly simple mechanism.

Skilful people who make the majority of “accessories” for motor vehicles with their own hands perform the construction of the coupling device for the trailer “tube in pipe”, from a cross tube, cardan shaft and other handy elements that remained from a variety of devices. The owners of such devices claim that it is possible to create such a unit without any problems, sharing their personal experience and drawings of the coupling device on the Internet.

Universal hitch for your power tiller with your own hands

The universal coupling is suitable for most models of power tillers, provides aggregation with attached or trailed equipment without backlash. Making a coupling device is quite simple, the main thing is to determine the tasks that it should solve, choose drawings and quality materials to ensure the strength of the node.

U-shaped coupling for power tillers and trailers is suitable for most power tillers. The main point in creating a coupling is to match the size of the brackets of the motoblock itself and the coupling device. The peculiarity of the device with a bracket is that the attached equipment, aggregated with its help with the power tiller, takes the position a few centimeters below the bracket itself, so it should not be at the level of the cultivated ground.

You can find many videos on the Internet, in which the owners of power tillers tell about the nuances of working with attachments, including how to make a hitch.

Hitch to a power tiller with your own hands

The U-shaped attachment is the basis of the coupling for the power tiller, so a channel of the right thickness and size will work perfectly to make it. This hitch is located under the tiller of the power tiller.

When making a hitch mount with your own hands, you need to drill a few holes to secure the bracket and the attachment pin in them. Therefore, the holes must be of the correct diameter. The pin should also be made of high-strength steel.

To attach additional attachments to the motoblock you will need a bracket. The long end of the bracket must be located either downward or upward, so that there is no interference with the connected equipment. In doing so, the end of the bracket should not touch the surface of the soil to be worked.

For making a homemade hitch, we used a standard example. Often additional attachments are applied to a power tiller, with non-standard types of coupling. To connect it to a power tiller, you must either buy a special adapter or make an adapter with your own hands. As a rule these are U-shaped brackets.