How much fishing line to reel on the trimmer

Successful fishing is possible only with careful preparation for it. In this article, we will examine the question of how to wind a fishing line onto a reel, because improper winding will lead to a number of fishing problems.

It doesn’t matter how favorable the weather is. if the gear is unprepared and the fisherman does not know how to wind the line onto the reel, then the line is very improperly dropped, the formation of “beards” and its breakage.

Reel models and fishing line winding options

A wide variety of types and models of gear made it necessary to study the question of not only how to reel a fishing line on an inertial reel, but also how to reel a cord on an inertialess or multiplier reel. Also competent winding fishing line on the spool allows you to maximize the casting distance to the value declared by the manufacturer of the product. Another important point. the fisherman must know how many meters of fishing line to wind on a spinning reel. Failure to comply with this parameter will lead to the fact that the braid, fishing line, cord will wear out very quickly.

Multiplier

Since winding the fishing line on the bobbin reel will work out well, provided that it is of the thickness recommended by the manufacturer, be sure to pay attention to this indicator. Before wrapping the fishing line on the spool, make sure that it is neither thinner nor thicker than the set values. Winding fishing line on a bobbin reel begins with her spool fixation. Thread the cord or scaffold into the hole of the logger and tie the spools on the axis.

If the spool is perforated, then before you wind the line onto the spinning, pass it through the hole and tie it onto a regular knot. If there are no holes, then use one of the two types of nodes for fixing:

  • special unit;
  • self-tightening knot.

How much fishing line to reel on the trimmer

Inertialess

As in the case of the “mult”, the cord is wound on an inertialess reel when its diameter is declared by the manufacturer. If the diameter is less than required, then winding the braid on the spool does not work out qualitatively. The result will be frequent occurrence. “Beards”. In addition, the correct winding of fishing line on an inertialess reel implies that the tackle will accommodate a certain footage. no more and no less. If the diameter is incorrect, deviation from the parameters will occur.

READ  What Gasoline Is Necessary For A Trimmer

The correct winding of fishing line on the spool is carried out according to the scheme "cross" or “Turn to turn”. Then the forests fit very high quality. If the winding on the spool of braid is done correctly, then the edge of the spool should remain 1-1.5 mm of free space. Now that you know how to properly wind the line onto an inertialess reel, let’s talk about inertial gear.

Inertial

If you know how to wind the braid on an inertia-free reel or the multiplier correctly, then you already imagine how to wind the braid on an inertial reel. The process is absolutely identical. Fasten the cord to the spool and start winding. Since it is necessary to wind the fishing line on the reel properly, observing the tension, be sure to pay attention to this. Another point worth noting is the right one. winding braids on the spool is carried out slowly, with smooth and uniform crank revolutions.

Often, the fisherman is interested not only in how to correctly wind the cord around the reel, but also the question of how to do it more convenient. Usually, someone is called to help in order to hold the woman until the fishing line is reeled up. But what if there is no one nearby who could help? How to wind the fishing line on the spinning reel in this case? Now we will tell you easy way how to wind the braid on the spool yourself.

Видео: How much fishing line to reel on the trimmer


You will need three books. Place two books in front of you parallel to each other so that between them there is a distance torn by the width of the woman. Since it is necessary to wind the braid onto the reel correctly with a slight pull, the third book will help us with this. Put the third book in front of the other two, and pass the cord between the pages. Its edge of the woods should go out of the book for tackle. Now you know how to wind the cord on the spool of the house yourself.

READ  Doesn't Develop Turnover Trimmer Echo Srm 22ges

What is backing

Before winding the braid on the spinning reel, the fisherman must answer a few questions. The first is how many fishing lines to wind on a spinning reel in total? The second question. how much fishing line do you need to wind on the spool so that it is enough for the desired casting? And here it may be necessary to use backing. Each tackle according to the instructions contains a certain amount of cord.

Suppose that before you reel a fishing line on an inertialess reel, you learned that in its tackle fits real 140 meters. And also you decided that in fact you need 80 meters, and therefore, winding fishing line on a spinning reel in excellent quality and in the amount of 140 meters does not make sense. What to do then, and how to wrap the braid on the spinning reel in order to save a new cord. The answer is simple. do backing, which is a backing made from old, unnecessary wicker or fishing line.

So, how to wrap the braid on the spinning reel correctly when backing? Measure a new cord with a margin so that it is enough for casting. Unused footage can be compensated by wrapping the fishing line on an old-quality reel. No matter how fragile it is, its purpose is to create base layer on which lies the new forest. Then connect the old and new cord and complete the winding! Try to keep the cord winding continuously until the process is complete!

How much fishing line does it cost to reel

Before wrapping a braid on a spool, each fisherman asks himself how much fishing line to wind on a spool? For each tackle there is a fishing line with a certain cross-sectional diameter and a certain number of tens or hundreds of meters that it can hold. Therefore, if you want to know how to wind the braid onto the reel and how much to wind the fishing line onto the reel, then strictly follow the manufacturer’s instructions.

But often fishing enthusiasts are guided not by instructions, but by their own considerations about how much to wind the cord on the spool. The ability of the scaffold to withstand the load, its length and thickness, is taken into account. As a result, it happens that the tackle is too small or too large for the needs of the fisherman. In the first case, you can purchase a larger product, and in the second, backing before wrapping the braid on a reel.

READ  How to Reel Fishing Line: Reel

Winding Profile Adjustment

There are three ways to wind a line onto a spinning reel. The cord is reeled up to form a profile, and it can be:

  • cylindrical;
  • inverse cone;
  • straight cone.

Adjusting the winding of the cord on the spool in the design of inertialess gear provides for shims under the spool (up to 6 pcs.), with the help of which the correct winding of fishing line to the reel is carried out. By adding and removing washers, the height of the spool is adjusted. With a high landing, a straight cone will form, and with a low one. a reverse cone. But how to wind the braid around the spinning reel so that a cylindrical profile forms? The fact is that such a default setting is provided by the manufacturer.

Differences between winding fishing line from braid

Is there a difference between how to wind the braid on an inertialess reel and how the line is winded on an inertialess reel? However, the type of gear does not matter, whether it be “inertialess” or a multiplier. The question is different. does it matter of principle whether it is used. fishing line or braided cord? Just say. there is no difference in the mechanism of how to wind the line onto a reel or cord.

The only difficulty may arise when the braid is wound. If the braid is wound on the spool without rigid fixation, the first one may scroll. That is why, before you wind the braid around the bobbin reel, or any other gear, you need to put a rubber gasket on the spool shaft. Part of the fingertip is excellent for these purposes.

Useful video

Let’s look at the video how to wind the line and the braid onto the reel:

In this article, we examined how to properly wind a fishing line on a spinning reel. Adhering to the above rules, you can always correctly reel the fishing line on the reel, the main thing is to be careful and unhurried in this matter. The very winding of the cord on a bobbin reel, or some other gear, should be measured, with the creation of a light tension on the cord. If necessary, use backing, try to do everything efficiently, as correctly wrapping the fishing line on the spool means significantly increasing the chances of successful fishing!