How to breed gasoline into a motorcycle. Reviews of gasoline modification “VIKING MV 248”

How much oil should be poured into a trimmer per liter of gasoline

Gasoline braids are fairly common tools used by owners of garden and household farms for mowing grass and hay harvesting. The more common names of the tools are the terms “trimmer” and “motorcycle“. The main difference is hidden in the design of the motor. The expensive segment of the devices is equipped with four.Stroke models, and cheap ones. Two.Stroke. The last option has advantages, including a small mass, ease of use, as well as low cost.

The most important condition for the operation of two.Stroke models is the preparation of the fuel mixture, based on the proportion of gasoline and oil determined by the manufacturer. The simplified engine design does not provide a separate lubrication channel, so the engine oil is added directly to the gasoline. Violation of the correct proportion leads to a significant decrease in the resource of the tool and even to its breakdown. We will figure out which composition is required for gasoline trimmers, how to prepare the mixture correctly and what it can affect.

Requirements for clockwork

A mixture of gasoline and oil selected for motorcycles must comply with the necessary requirements specified in the instructions. It is important to note that domestic manufacturers often mark their products a little differently, not as it is customary according to the American or Japanese classification. Russian manufacturers of lubricants, as a rule, put 2t marking in all oils intended for two.Stroke engines. Often on the shelves of stores you can find canists with butter, on which there are marks “Self mix” or “Pre mix””. In the first case, this means that the oil does not require any additional manipulations, it is enough to simply pour gasoline with butter into one container, and mixing will occur without human participation. In the second case, accordingly, you will have to shake or shake the mixture to bring it to the desired consistency.

As you can see, the existence of various classifications of lubricants suggests that the use of oils in two.Stroke engines is necessary. This is due to the fact that the fuel mixture without a lubricant will quickly disable the internal combustion engine, which will not be lubricated properly. Gasoline with butter forms the necessary environment, which reduces detonation, removes excess garbage (working out from the combustion of gasoline products) and protects the inner surface of the engine from wear.

It is important to remember that when using oil the wrong classification, it can occur Damage or clogging of the motor. Of course, it can be repaired, but in order to prevent possible breakdowns, and minimize their probability, it will be better to study the operating instructions, find out the volume of a two.Stroke engine installed on a motorcycle, and use only gasoline with butter, which will fit this in all parameters Models.

First of all, all the oils of unknown (garage, basement) of origin should be immediately excluded from the list of actively operated lubricants. Usually diluting such oils is not easy due to an unclear base, composition. As a rule, the labels of irregular manufacturers do not abound information, illuminating only general information, without clarification. It is extremely recommended to dilute and dilute oils such as AS-10 and ASZP-10. The origin of these lubricants is usually very vague, it is better to give preference to proven brands that thousands of people throughout the country use every day.

See also  Reasons Why Gasoline Trimmer Starts And Stalls

A distinctive feature of all oils for two.Stroke engines is the fact that manufacturers stain them in a color contrasting with gasoline. The liquid is translucent, viscous in consistency, slightly yellowish, but not thick. Usually, we are talking about three colors. Red, green and blue.

In no case should you use oils from a line not designed for a trimmer. This can extremely negatively affect the work of the power unit, lead to increased fuel consumption, soot on candles and a number of other problems that will have to be identified and eliminated. It should be noted that if the fact of using oil that is not included in the tolerances will be established, the seller has every right Remove the apparatus from the warranty. This means that the replacement of failed parts will have to be at their own expense, and no exceptions will help here.

If the acquired liquid does not have the declared qualities (for example, too liquid), in no case should it mix it with gasoline. It will be best to return such oil back to the store, explaining to the seller the reason for the return.

Redverg Redverg RD-GB233 gasoline trimmer

Trimmer gasoline Redverg RD-GB233 is designed to work with grass and small shrubs. With it, the operator will be able to quickly and easily put the lawn of small or medium area in order. Comfort and safety during work. This is what the manufacturer first turned to. The ergonomic bicycle handle gives the master the opportunity to sensitively control the direction of movement of technology and achieve impressive results of any work.

Motor cultivators rating 2021. 2022

Lightness, compactness, mobility and other advantages of electrical cultivators

Learn about profitable offers and receive personal recommendations

The goods are presented on the site by photographic materials, photographs, textual, schematic, and advertising materials. Are the property of the seller. At the request of the buyer, the seller may provide detailed information on the products provided for the product.

Information posted on this site is not a public offer provided for.2 of Article 437 of the Civil Code of the Russian Federation, as well as possible by any other norms of civil legislation of the Russian Federation or a foreign state. This information does not express the will of the subject who posted information about the product for the conclusion of any relationship, both a certain circle of persons and an indefinite circle of persons. The information presented on this site is only information about the achievements in the production (or wholesale-trade) sphere that the owner of the site was able to achieve. Information provided on this site cannot be used to conclude, execute and terminate the contract of sale concluded by remote method.

Features of refueling motorcycles

When the mixture is ready and ready for use, it must be carefully poured into the fuel tank. Since gasoline is toxic fluid, when working with it, you need to observe safety precautions. Work must be carried out in measured weather and away from third.Party people. Also to pour fuel into the tank, you must use a funnel or a funnel with which you have previously diluted the mixture. In an unpleasant case, the mixture may blur, go unnoticed and inflamed when the engine is heated.

See also: Cayman motor cultivators, review, features of operation and maintenance, possible malfunctions and repair

The fuel bank itself must be cleaned of external pollution and only then unscrew its cap to refuel it with ready.Made fuel. After filling the combustible, the reservoir should not remain open, since insects or soil can get into the tank and clog the fuel filter. The fuel should be poured into the tank of the designated mark either less, and then in the time of operation.

When storing the container, it is necessary to close tightly with a lid. Store combustible in a cold room, outside the sun’s rays. It should be kept in your head that with prolonged storage of consistency, the oil liquefies and loses its characteristics.

The consequences of refueling with a mixture with incorrect proportions

When diluting fuel and lubricants, it is very important to observe the ratio recommended by the manufacturer Motokos. If the oil is not enough, then on the piston and the cylinder are formed in bulk, which sooner or later is led to breakdown of the piston ring.

See also  Which is Best to Take a Gasoline Lawn Mower

And at Excessive amount of oil There is a shift in the piston ring, as well as the formation of a carbon on the piston, on the spark plug, etc.D. All this leads to strong wear of equipment and the need for constant cleaning.

Motokos oil. How to choose in what proportions to breed

Many of you have a benzo tool in the household, for example, in a private house you can not do without a chainsaw. You understand, the harvesting of firewood for the winter is useful at a construction site and repair and in general, this is a very necessary tool. If the country house also has a decent area in size, then to combat grass just needs a trimmer or motorcycle, which also work on gasoline.

Of course, they can be bought and electric, but not everyone likes to pull a 30-meter extension cord to dig an area overgrown with grass knee-deep. Therefore, most people prefer to work as a gasoline tool. As you know, you need to add special oil for two.Stroke engines to gasoline. We’ll talk about it, because this is a very important aspect, if you do not add oil and add in the wrong proportions, then your engine will quickly “grunt” and your path will lie to the service center. To avoid all these troubles, add only high.Quality oil and in the correct proportions.

The most popular for chainsaws, motorcycle and trimmers is the products of the famous company STIHL. It is sold in 2 packages. 1 liter and 100ml. For those who work hard, a liter bottle is suitable, and a small bottle is enough to “drink” at a time. A capacity of 1 liter costs 250 rubles, and for 10 ml. 60 rubles. If you take a large one, then the savings are obvious.

Oil is added to gasoline in a proportion of 1 to 50, that is, for example, add 100 ml per 5 liters of gasoline. As you can see, a small bottle is great for 5 liters of a mixture of gasoline for refueling a chainsaw or trimmer. On a large bottle on the side there are special marks by which you can determine how much oil was poured out of the bottle. If you bought a large 1 liter bottle, then buy a 20ml syringe in a pharmacy. Very convenient. 1 oil syringe per 1 liter of gasoline.

Experts advise using branded oil for their technology, it is perfect, since it is developed and tested precisely on the instruments of calm. I note that Stiel has its own brands, such as VIKING (popular models of gasoline trimmers). For them, also use Stilevsky oil and there will be no problems at all.

If you have made a gasoline mixture more than you can use it, then it is best to store the remains in a metal canister or in a glass container. In no case do not store the mixture in a plastic bottle. Of course, if you consume the remains after a couple of days, then you can pour the remnants of the mixture in a plastic one and a half, however, if the mixture is stored for a long time, then either a canister or a glassotter. The thing is that the gas mixture corrodes the plastic bottle, microscopic plastic precipitation appears in the mixture and this is very bad for the engine. Keep this in mind if you want your tool to work for a long time and without problems.

The second most popular brand of oil is a non.Bonding hokesworm. Of course, if you estimate it, after all, STIHL chainsaws use more people, at least all my friends and their friends use only them in their work.

However, there are those who do not have souls in the Husqvarna tool and I understand them, since I personally do not see much difference between Khuskvarnaya and Shtil, and one and the other tool is very high quality. But I saw satisfied owners of Husqvarna chainsaws. They say, saws are just super. I myself did not saw, however, I always listen to the opinion of people. So, if you have a gas.Based gas tool, then it will be better for him to use special branded oil. Although nothing terrible will happen if you dilute the gasoline with a signs. But since the manufacturer recommends using only its products, we will do so.

breed, gasoline, motorcycle, viking

On sale you can find liter containers. Black stylish bottle, the same marks on the side, and with a person (to know how much oil was cast from a bottle). As for me, absolutely identical quality. There is such a bottle of 270 rubles, a bit more expensive.

See also  How to use a wood sander

Both that, and another oil, the cost is approximately the same, each is diluted in the proportion of 1 to 50. So feel free to buy anyone, of course, it is better to take the oil of the brand you have a tool. Then everything will be perfect, as the manufacturer advises. Good sawing, spinning grass and let your benzo.Tool work for a long time without breakdowns.

Another note: the submersible pump “Aquarius 3”. My review.

The rules for filling the mixture in different engines

The main rule is to strictly observe the mixture ratio for two.Stroke engines and not use such compounds for four.Stroke engines. In addition, observe the principle of “seasonality”. After a long stay of fuel in a gas tank, drain it and replace it with fresh.

It is practical to immediately prepare a certain amount of the mixture for the future, so that later it can be quickly used. When stored, adhere to the rules:

  • Keep a gasoline composition for no more than 3 months, since it is divided;
  • Use to store a container that does not pass sunlight. Keep it away from the direct rays of the sun;
  • Do not place the container next to the heating devices.

Gas trimmer loves cleanliness. It is necessary to monitor the purity of the air filter and fuel. It is better to defend gasoline bought at a gas station for 2 days and pass through the simplest filter. A piece of bike matter.

We check the electrical equipment as follows:

One. We unscrew the candle, examine the gap between the electrodes. We set the right gap between the electrodes can be a “grandfather” way. We take a blade from a razor, scraps in half and insert a home.Made probe between the electrodes. If the blades enter tightly, then the gap is perfect.

We put on a candle cap of a high.Voltage wire and lean the candle against the metal surface of the engine. Twist several times by the starter. If the spark beats well at one point, then the gap is adjusted correctly. If not, the spark is weak or “wanders”, then it is necessary to re.Adjust the gap between the electrodes.

The finished mixture of gasoline with butter can be stored for no more than 3 months (clean gasoline is stored less). Dilute the fuel in the quantity that is enough for several applications of the trimmer. In general, prepare:

  • Gasoline and oil, which is suitable for two.Stroke engines with an air cooling system;
  • Metal canister and a mixture container;
  • Respirator;
  • Gloves.

Adding oil to gasoline

Tesco petrol for £1.00 !!!. Revvedupbiker

  • Pour 1 l of gasoline into a suitable volume of 1 l of gasoline and add 1/2 of the desired amount of oil.
  • Mix carefully, being at a decent distance from the sources of open fire.
  • Add the rest of the oil to combustible and mix everything again.

The process of refueling the trimmer

breed, gasoline, motorcycle, viking

General recommendations for refueling a trimmer with a two-or four-stroke engine: