How To Build A Folding Sawhorse – Quick and Easy. Collapsible saw horses

Make Carpentry Effortless With the Best Saw Horses

No matter what sort of carpentry project you are working on, a saw horse is the handiest and most functional tool of all time! It is not just like any basic wood-cutting equipment. In fact, having the best saw horse in 2023 provides you with a proper, full-fledged workstation to perform your tasks conveniently.

The best saw horse will not only make everything accessible to you but will allow you to adjust the height of your workstation according to your preferences as well. over, you will be able to finish your work faster than other standard and traditional wood cutting tools like axes, hand saws, and blades. Whether you are a professional or a hobbyist carpenter, buying the best saw horse would be the best thing you will give yourself!

So, thinking about buying the best saw horse and not sure where to start? We know that there are hundreds of saw horses available in the market, and finding the best one can be a tedious task. Below, we are sharing our top 5 recommendations for the best saw horses to choose from, along with a detailed and comprehensive buying guide for you to make a smooth and convenient purchase, Keep Reading, you won’t regret it!

Best Saw Horses Buying Guide

Now that you have gone through our top recommendations, it is time for some technical and more important stuff. As we said above, the market is currently flooding with numerous saw horse brands, each claiming to be the best. But in reality, not every saw horse will be the suitable one for you. There are a lot of factors you need to consider before finally making the purchase, to save yourself from unnecessary hassle in the future. Want to know about those factors? Keep Reading!

Buying Considerations for Best Saw Horse

Here are a few important factors that you should always consider before buying the best saw horse. Also, all these considerations will be related to your personal preferences and needs.

Weight capacity

The first and foremost thing to consider before buying the best saw horse is its weight capacity. Will it be able to support the weight of the wooden planks you are planning to cut or not? Because some saw horses are made for simple and household uses. While on the other hand, some are designed for heavy-duty and professional job site use, and the weight capacity for each is different. Therefore, identify your use and needs first, and then purchase the saw horse with the required capacity.

Material

The next important thing to consider is the material your saw horse is made of. Saw horses consist of different materials; plastic, wood, or metal. You just need to figure out which material would be more comfortable for you to work with. Also, each of the materials has its pros and cons. For example, plastic ones are lightweight but their weight capacity isn’t sufficient. Similarly, wooden saw horses have an ideal weight capacity, but they are generally very heavy to move around.

Size support

Just like the weight, saw horses can not support every size of wooden planks as well. Every saw horse has its own size, support and capacity. Some can only have a 2 x 4 wooden plank while some can support a 4 x 4 one. So, make sure to properly check the size support of the saw horse you are going to buy, or whether it is going to fulfill your requirements or not.

Design, durability build

Next, make sure to keep a keen eye on the design, build, and durability of the saw horse you are planning to buy. Trust me; a low-quality saw horse would give you nothing but loads of inconvenience and hassle. While on the other hand, a durable saw horse with a high-quality build will give you years and years of satisfaction! You can complete your heavy duty tasks with a tension free mind when you have a reliable tool. So, keep in mind; never compromise on the quality!

Also check for folding sawhorses that makes them highly portable.

Price range

Lastly, it is important to consider your budget before spending your money on the best sawhorse. Most of the units on our list are budget-friendly and would be able to perform most of the basic tasks. Also, we have some high-end options as well for use in professional heavy duty tasks. However, in the end, it is essential to purchase while staying within your budget. over, don’t let the expensive price tags fool you. Sometimes things with lower price tags work better than the higher ones! Also keep an eye for those special offers where you can get more at half the rates.

Features To Consider When Choosing a Saw Horse

Now that we are done with the buying considerations, let us go through some additional and beneficial features you should always look for while buying the best saw horse in 2021. Trust me; these features will work as a cherry on top!

Foldable

Always make sure to look for a saw horse that has a foldable design to ensure maximum convenience and comfort for yourself. This way, it will be easy for you to transport the saw horse from one place to another. Not to forget, storing a foldable saw horse would be relatively easier than the standard designs.

Height adjustment

Height adjustment is one of the most important, beneficial, and versatile features you should always look for in a saw horse. With the help of this feature, you will be able to move the height of the saw horse according to your own. Different types of carpentry projects need different types of height levels to work, and the handiest thing in this scenario is the best saw horse with customized height adjustments.

Built-in storage space

Storage space is not a very important feature and it does not affect the functionality of a saw horse. But still, if you can spend a few extra bucks, it will give you nothing but utmost convenience! Some saw horses have an in built sturdy shelf or table sort of storage space under them. This storage space helps you to put the essential tools and equipment right next to you during the projects. Again, having a saw horse with storage space isn’t essential, but it would not hurt either.

If you are looking for some tips when setting up your saw horses, the video from ‘The Honest Carpenter’ will surely be helpful.

Conclusion

Now that you have gone through the whole, long guide, we hope you are all ready to buy the best saw horse for yourself. We are recommending all the products after thorough research and testing, so you can rest assured about their quality and functionality. Just make sure to consider all your needs and requirements before making the purchase!

So, which one did you choose? Do not forget to share your experience in the Комментарии и мнения владельцев below. We would love to hear back from you!

How To Build A Folding Sawhorse – Quick and Easy

For the amateur or the professional woodworker, a good pair of sawhorses is an essential element to any project. See our full review of the best sawhorse to buy. Steve Ramsey of Woodworking For Mere Mortals takes the simple task of making your own sawhorses one step further.

The only real problem with basic sawhorses is they take up a lot of room in your shop or garage. This simple folding sawhorse design from Steve is very easy, quick, and will solve the storage problem basic sawhorses cause.

The best part, you only need two 2x4x8’s to build each sawhorse (not including the shelf). ​

What You’ll Need

• 2. 2x4x8’s
• 1. 1/2 inch 4×4 Sheet of Plywood
• 2 1/2 inch Screws
• 2. 3 inch Strap Hinges (with screws)
• 4. 2 inch x 1/2 inch Dowels
• Cordless Drill
• Miter Saw or Table Saw
• Band Saw or Jigsaw
• Wood Glue

Cut The 2x4x8’s

Like I said earlier, you only need two 2x4x8’s for each sawhorse. The best way to start is to cut all of your base material in the beginning.

Sawhorse Base

2x4x8 number one. cut into 3 equal lengths at 31.5 inches.

2x4x8 number two. cut one piece at 31.5 inches, and one piece at 48 inches.

​The Shelf

The remaining section of 2x4x8 number two will need to be cut into four strips at 3/4 inches wide x 15 inches long. Or, if you don’t want to go through the trouble of cutting a 2×4 into strips, just purchase a 1×2 strip and cut to length.

The shelf should be a 1/2 inch plywood rectangle at 13.5 inches x 27.5 inches. ​

Build a folding sawhorse cheap and fast

​Click here to view the cut list and full plans for this sawhorse.

Cut 19 Degree Angles

Using a table saw or miter saw, cut the ends of each 31.5 inch board at a 19 degree angle. The angles should be parallel on each board.

Make sure you are not changing the overall length of each board. ​

As shown in the picture below, you can save a bit of time by setting your saw at 19 degrees when cutting the boards in described in step one.

Drill Holes

Drill holes on one end of each 31.5 inch leg to connect the leg to the top of the sawhorse. Simply ensure you are using the correct bit for the size screw you will use.

On that same note, be sure to use a screw long enough to penetrate both boards, but not long enough to drill all the way through the top board.

For one, I don’t work for Kreg, nor do they pay me to endorse their products. However, if you don’t have one of their Kreg Jigs, you are missing out. If you need to make a hole, this is the tool for you.

Watch this quick video below to learn more.​

Pre Drill and Secure 3 Inch Strap Hinges

Using a straight edge, draw a straight line 4 inches from each edge of the 48 inch brace board to mark where the sawhorse legs will be attached.

Center your leg on the top board and, using your strap hinge, pre drill the holes where the hinge will be attached to the leg and brace board. ​

Attach the hinge to the leg, and attach the leg using the appropriately sized screws (2 1/2 inch) to the top board.

Note: You are only attaching the leg so you can accurately mark the hinge holes on the other leg.

You are probably thinking, “how am I supposed to fit a pencil in between the boards to mark the holes?” Well, all you need to do is cut a pencil down to about 2 inches and there you go. It’s also a good idea to have a few stubby pencils laying around for this purpose.

Unscrew the legs from the top brace board. Next, pre drill the holes you marked, and attach the hinge.

Mark A Line Halfway Down Each Leg

Now you should have your legs ready to modify for the shelf. Using a straight edge, mark a line halfway down the sawhorse legs. This is where you will drill the holes for the dowels that will hold up the shelf brackets.

Note: If you don’t need a shelf, skip to step 8.​

Drill Holes For Dowel Rods

Drill a 1/2 inch hole in the center of each line on your legs. Just remember, if you are using a different sized dowel rod, you have to adjust the size of the hole. For instance, if I am using 3/4 inch dowels, I need to drill a 3/4 inch hole.

Note: Steve Ramsey has a nice drill press to help with this step, but you can drill the holes with a cordless drill as well.

Attach Dowel Rods

As always, add a generous amount of wood glue to each hole before hammering in the dowel rods.

Place the dowel rods in each hole and lightly tap until all dowels are approximately the same length. Wipe off any excess glue.

Secure Legs Onto Top Sawhorse Brace

You probably already feel like you’ve done this, and you are right. Now, just repeat the steps and attach the legs to the top brace.

This sawhorse is sturdy enough at this point, but adding the shelf only increases the strength and sturdiness.

Drill Holes, Notch, And Attach Shelf Brackets

Using the sawhorse legs as a guide, hold your 15 inch strips against the center line on the legs, and mark where you will drill each hole to attach onto the dowel rods.

Free and Simple Projects / Perfect DIY Folding Sawhorse

On one of the holes on each board, notch out a hole so it can be lifted off the dowel rod.

Note: Steve uses a Band saw to make his notch, but a jigsaw, or most other saws will work if you are careful.​

Secure Plywood Shelf

Secure your 13.5 inch x 27.5 inch plywood shelf onto the brackets. Ensure you do not screw into the dowel rods, or your shelf will not be able to fold as intended.

All Finished!

Time to sit back, relax, and enjoy all the extra room you just created with your new foldable sawhorses.

We put a stable of store-bought sawhorses through their paces to learn which ones work best on the job site.

Synopsis: Senior editor Patrick McCombe ordered 13 of the best-selling sawhorses from popular online retailers. He ended up with two setups—fold-flat and fold-up—and tested both groups by loading them with PT lumber, setting them up on uneven ground, and cutting both sawn lumber and panel products. Patrick lists the pros and cons of each sawhorse—noting that the ability to add a sacrificial top and height-adjustable legs are two of his personal preferences—and names two noteworthy products “Best Overall” in each category.

Like every carpenter who’s been at it long enough, I own or have tried several sets of commercially made sawhorses. I’ve also used homemade wooden horses quite a bit. The problem with site-built horses is that they’re heavy and big. I just don’t have the room in my truck or shop for a set of nonfolding horses, so when former editorial director Justin Fink asked me about my interest in testing commercially made sawhorses, I was intrigued.

When I started digging into what’s available, I found a surprising number of different designs, weight ratings, and degrees of compactness. The lockdown in response to the outbreak of COVID-19 brought a unique challenge to my test—since I couldn’t go out shopping, I ordered the best-selling folding sawhorses on the Lowes, Home Depot, and Amazon websites. I ended up with 13 sawhorses, in two types of setups—fold-flat and fold-up. Both have their pros and cons, and which to use depends on what you’re doing and your budget. In more than 20 years of testing tools, I can’t think of a tool category with a greater diversity of products with such different features and attributes.

I was a little hesitant about this particular tool test because sawhorses are such a personal choice. Different users value different attributes. I routinely use sawhorses for rips on panel products, so I need the ability to add sacrificial lumber to the top of the horse. I also prefer adjustable-leg models because they can be made taller than fixed-leg versions (which are usually around 32 in. tall). I tested each of the various setups the same way: I loaded them with PT lumber, set them up on soggy, uneven ground, and cut both sawn lumber and panel products. and weight ratings are based on a pair of sawhorses, and all measurements are my own.

Fold-flat sawhorses

Fold-flat sawhorses are light, reasonably compact, and great for light-duty tasks like painting or trimming a door. They fold up easily and slim down to about 2 in., so you can tuck them into small spaces. The DeWALT and Ridgid models have adjustable steel legs, greatly increasing their utility and load rating. All the flat-fold horses I tested have plastic feet, so they won’t mar wood or laminate floors or leave rust stains on concrete. Only Ridgid’s Lumberjack has provisions for a sacrificial top.

Best overall: Ridgid Lumberjack

This is the best fold-flat sawhorse I tested. My favorite feature is the replaceable 2×4 top rail that makes it easy to rip panel products and fasten jigs. I also like that you can clamp along its entire length and you can make the top larger by screwing another board on top. This horse also has the best shelf. It’s sturdy, and small parts don’t fall through. Another great feature is the leg adjustment—you don’t have to pull a release to raise the legs; just step on the feet and pull the horse up and they extend. Lowering the horse is simple: The orange handles under the tray act as a release on each side. Combine these features and the weight capacity, and the Ridgid is an easy choice for Best Overall.

DeWALT DWST11031

This was my second favorite fold-flat sawhorse. It has adjustable steel legs and a sturdy shelf with only a pair of holes, so stuff is less likely to fall through. Like nearly all the other fold-flat sawhorses, you can’t mount a sacrificial board to its top. And unfortunately, you have to squeeze the release and adjust each leg individually. I’ve had a set of these for several years. They work fine and have held up well.

Kobalt 514691

The Kobalt and Stanley fold-flat sawhorses are nearly identical. The slope-sided design limits where you can use quickadjusting bar clamps to the part of the top that overhangs the legs. Without adjustable legs, they are also too short for me to work at a comfortable height. Unfortunately, the two halves on one of the Kobalt horses were misaligned, so I couldn’t get a 2x in the slots that are supposed to be made for them.

Stanley 060864R

Like the Kobalt sawhorse, Stanley’s fold-flat horses are made entirely of plastic. I worried both would be flimsy, but each set held a large stack of wet pressure-treated lumber with no ill effects. Each horse has six hooks—four for hanging tools and two down-facing hooks for wrapping cords—but none are big enough to be of much use. My worm drive’s handle doesn’t fit over the tool hooks, for example.

Worx WX065

Weight per horse: 8 lb. (with clamp)

Sometimes things look better online than they do in person. The big selling point with these horses is the quick-adjusting bar clamp on the top rail. The two halves of the horse lock the clamps in place when you fully open the horse—which means they also fall off when you fold the horse. The clamps are flimsy and the mechanism gets bound when they’re attached. Except for the clamps, these are similar to the Kobalt and Stanley horses, but cost 30 more per pair.

Fold-up sawhorses

With one exception, fold-up sawhorses have legs that fold into or under the body of the horse. When folded, it makes for a very portable package. Unlike the fold-flat variety, which are mostly plastic, these horses are made of steel, so generally they’re bigger, heavier, and have higher weight ratings than the fold-flat variety. Some have telescopic legs, and most can be used with clamps if you add a 2×6 or wider piece of sacrificial stock. The Trojan horses don’t fit in their own housings—they don’t have them—but they’re practical, tough, and equally compact.

Best overall: Trojan TS-35

Length: determined by 2x top

Folded dimensions: 5 in. by 5 in. by 36 in.

I’ve seen these horses on job sites for 25 years. Everyone I’ve met who’s owned a set talks about their commonsense design, unsurpassed capacity, and durability measured in decades. They’re also extremely portable when folded and their length is only limited by the length of 2x stock for the top. They’re likely overkill for a hobbyist, but they’re perfect for pros who want tough everyday horses that work without drama. Just make sure to work the spreaders with your foot or risk losing a finger. Even with the caveats, this is the sawhorse you won’t break or outgrow.

Bora Portamate Speedhorse

Folded dimensions: 3x6x45 in.

The Speedhorse has “quickdeploy” technology—you pull a side-mounted catch with a couple fingers and the legs drop out of the body, which is pretty cool. The top is predrilled for a sacrificial board, and it has notches on both ends to receive 2x stock. The legs conveniently fold into the body in any order, but they’re not height adjustable.

DeWALT DWST11155

Folded dimensions: 5x5x44 in.

This is the sawhorse reinvented. Light and strong, the top is made from rectangular tubing. The design allows you to clamp almost anywhere along its length and a “V” on both ends allow you to hold pipe, tubing, and round stock. There are even latches on the ends for connecting the horses when folded, so you can carry a pair one-handed.

Ebco SS-29

Folded dimensions: 7x6x31 in.

Made from galvanized sheet steel, the Ebco has edges sharp enough to warrant a warning sticker in two locations on every horse. It’s a design I first used over 25 years ago and am happy to have abandoned. On the plus side, the top is predrilled for a sacrificial top, but the legs aren’t height adjustable and the whole package is rickety.

FORUP

Folded dimensions: 3x4x39 in.

I was intrigued by these horses because of their super-small size when folded and their low price. Stay away—that’s all they’ve got. If you try to slide them when they’re open, the spreaders holding the legs are jostled out of place and the legs fold up as you’re dragging. To add to the disappointment, some of the bolts were left loose at the factory.

Kobalt 81330

Folded dimensions: 3x6x36 in.

Remodeler Andrew Grace wrote about these horses in FHB #280. They have a predrilled top and height-adjustable legs, and notches on the ends receive 2x stock. They get smaller when folded than similarly designed horses in the test, but you have to fold the fully collapsed legs in the right order or they won’t fit inside the housing.

Stanley STST11154

Folded dimensions: 4x4x31 in.

If I were a carpenter traveling by mass transit, these are the sawhorses I would carry. They weigh less than any other in the test and have a minimalist design Krenov would approve of. The top is not pre-drilled and the short legs are not height-adjustable, but you can lock a pair together and carry them one-handed. But stay away if you’re tough on gear.

ToughBuilt C650

Folded dimensions: 4x6x43 in.

These are biggest and heaviest horses in the test. The top has notches on the ends that receive 2x stock and is predrilled for a sacrificial top. The telescopic legs adjust independently. You have to fold them into the housing in the right order, and two of the legs must be lowered, but the other two can be kept locked in at your preferred height.

Show us your stallions

From FineHomebuilding #294

To this article as a PDF, please click the View PDF button below.

Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.

Get home building tips, offers, and expert advice in your inbox

ToughBuilt Folding Steel Sawhorses are on Sale at Lowe’s

Lowe’s has this 2-pack of ToughBuilt folding steel sawhorses on sale for 49.98 as a limited time buy.

The same sawhorse is 34 individually at Lowe’s, and so you’re saving around 18 with this deal assuming that, like most users, you’re looking to buy a pair.

ToughBuilt is a ToolGuyd sponsor and sent us a set of these sawhorses for testing and review. So far, I’ve been pleased with their build quality. (Let me know if you have any questions!!)

The sawhorses can support up to 1100 lbs each, or 2200 lbs per pair. They feature 100% steel construction, with powder coated and zinc-plated surfaces for corrosion resistance.

The 36.5″ top surface has a grippy liner material, and a carrying handle that sits flat when it’s not being used.

You can use these as sawhorses, or drop a sheet of plywood (or similar) on top to create a quick work surface.

• Easy to set up and take down
• Solid and stable in use
• Light and portable
• Add sheet goods for a quick portable worktable
• Steel construction

Price: 49.98 for the 2pc set

Upgrade Option: ToughBuilt C650 Sawhorse

If you’re looking for a heavier duty and more featured sawhorse, consider the ToughBuilt C650, which is also discounted for the holiday season.

Compared to the C300 sawhorses featured in the TB-SH30-2 set discussed above, the C650 is sold individually and can support a greater load (1300 lbs each vs 1100 lbs).

The C650 also has built-in support arms for use with 2x4s to create a more rigid work table support.

Additionally, the C650 has pivoting feed, adjustable-height legs, and fold-out materials support pegs that can support up to 80 lbs. The support pegs could be useful for supporting sheet goods.

24 Комментарии и мнения владельцев

Get the upgrade model. I have a knockoff version but I cross shoped them for a while looking for the 650 or the 700 model and Lowes had this knockoff dirt cheap. my point the 2×4 notches and height adjust legs are worth the extra. put 6ft 2×4’s in the notches – lay some undlayment or 3/4 ply whatever and you have a sturdy sag free work tabel that can take some effort. Like rebuilding a transmission effort. Then you take and say you’re working on a cabinet or a dog kennel table it’s 35 inch tall – drop the legs a bit so while on the table the project is nore comfortable height. etc etc. I like my knockoffs enough but I would get the 650’s in a hearbeat. Also one major design change I noticed – the notch ends are fixed now when they used to fold out. I think it’s a better product that way.

Lowes branded knockoffs. they still sell them I think and are patterned after the older model 650. where the 2z4 support folds out with the leg. Not quite a well made but not rickety when put to use. For something I use rarely I couldn’t justify double the price so I took a gamble and they’ve worked out so far.

“lay some undlayment or 3/4 ply whatever and you have a sturdy sag free work tabel that can TAKE SOME EFFORT. Like rebuilding a transmission EFFORT.” What does that mean?

I got the 700’s for my shed project, and overall they were awesome. They performed excellent on grass and mud that was uneven. When folded up, they take up very little room. The build quality is good and it shows in the weight of each sawhorse. The only gripe with regards to build quality is that the brackets towards the bottom of the legs that hold sheet goods are attached with whimpy rivets. The first time I put a sheet of plywood on them one of the rivets snapped and the bracket is bent. I guess only having an issue with 1 out of 4 brackets isn’t the end of the world, but annoying. I am hoping to drill out the broken rivet and pop a new one in.

The upgraded models are worth it. I have the Kobalt-branded versions of them and they’re outstanding. Height adjustable legs are great for outfeed tables and those little posts to elevate sheet goods for cuts are appreciated, but nothing is more helpful than the space they save on the truck.

I have been on the hunt for the perfect saw horse. I am always over analyze the product features of my purchases. Looking for compact, lightweight, fast setup, 2×4 brackets, adjustable height and casters. That last requirement of casters is a pipe dream I believe. So far I am leaning towards the C700, they check one or two boxes.

I got a pair of the C650’s and they’re incredibly well built – I think they’re the last sawhorses I’ll every buy

since you don’t need the 4×4 capability get the 650 or a version of it (bora and others make models like it) what do you want the casters for? Like on it when deployed to move the table, or on the folded up version to help move them? If for on the table, I wouldn’t do it but if you had to I would make a dolly with locking caster on it (might need 2 per) to set each leg on. as yes I agree they would never come from the factory that way. I find with a little bit of effort I don’t have much trouble moving the table when I need to – unless I screw my sheet to the rails. If you do that it’s rigid such that it’s not going to be easy to shimy over.

I believe the 700 has the extra flip down 2×4 support that raises up your makeshift table rails to account for a sacrificial 2x fastened on top of the sawhorse. I like having a board up top, to have that material to screw or cut into or to clamp onto to secure a workpiece. For example, if I am using a jig saw or router, a work piece can be easily clamped down to the 2x overhang. The locking caster option makes it easy to shift around the horse or table configuration to make room. For example, in my shop, certain mitersaw and table saw cuts need extra infeed space, and this worktable would need to move away temporarily. Also, to wheel a project outdoors when dust is flying to keep the mess out of the shop and out of the lungs. It’s just what I am used to. I have that configuration now with heavy duty welded steel I-beam sawhorses and casters. Current setup is really handy but is not portable and it’s a bit too tall. I like your idea of using some sort of dolly to place underneath.

Single casters are fundamentally incompatible with tilting feet, one must choose one or the other. The dolly idea would work though, you could use the sawhorses normally if you wanted them to be solid on the ground, and if you wanted casters you could set each sawhorse on 3-wheel furniture dollies like these: https://www.amazon.com/9299-6-Inch-Tri-Dolly-200-lb-Capacity/dp/B00004YOKC/

Any idea when the sale will end? I have a pair of the 700s, which are amazing, but will probably get two more pairs of the more basic ones shown here.

Lowe’s listing says “Ends Jan 28” for the C650. The C30 set is a seasonal buy, and there’s no telling what will happen. Given what I have observed in the past, I cannot offer any guidance here. Deals sometimes end ahead of schedule, go up in price, or sell out unexpectedly. Others are available well into the new year.

Been eyeing their horses for a while but yet to pull the trigger. Anybody have experience with the Worx brand clamping sawhorses? I saw a 2pk at sam’s about a month ago for 50, slightly more well-featured than the C300s, but wasn’t ready to buy without comparing to the TB lineup. The horses I use now are plastic fold-ups I got years ago at a yard sale, and have made it this far. It’s hard to appreciate the features packed into the C650/700, but I feel like I will regret getting something that does not have them (at least jobsite table). Pivoting feet and variable height sound nice too… And this is why I’ve held off!

I have a couple plastic fold-ups that I inherited from a family member. I am normally a stickler about things like workbenches, jackstands, sawhorses, etc, being overbuilt but I have to admit those plastic ones are very convenient for light duty jobs. They are so light it’s easy to grab and carry two with one hand. They are nice to have around. I mainly use mine to support items being painted. That said, I don’t think they are a substitute for having something more heavy duty. I feel that a sturdy work support or work surface is essential for both safety and quality work. It is difficult to be precise or to work efficiently if you have to worry about the work moving around on an unstable platform. In my opinion the higher end models of these are well worth it.

Definitely no substitute, the portability and lightweight is great in it’s own regard, but to your point they are no substitute for a heavy duty set. Back when I lived with my father, he’s got a set of bifold legged horses with replaceable 2×4 top, and they’re beefy. But also a bit of a PITA to deal with. I want something that is heavy duty like that, but a bit more friendly to use and with some of the extra features. Queue the Toughbuilt lineup, or maybe (maybe?) the Worx ones I was taking about above. The Worx are cool because they have the built in squeeze clamp, but looking at them again I think that’s the only thing they add over the lightweight plastic guys I’ve already got – look almost the same otherwise. Tough built it is… Whenever I decide to pull the trigger.

I have the c550 for about 3 yrs now. I’ll never go back to the plastics again. Wish I had got the C650, but they weren’t on sale when I bought mine

This two pack was 30 last week on a Daily Deal. I bought a pair to supplement my C700s. They’re nowhere near as nice–I particularly miss the adjustable height–but they are easy to set up and store and more stable than anything else I’ve seen near that price. At 50 for the pair I’d say that they’re a decent buy, but if possible it’s worth spending the extra 40 to just get a pair of C650s. The extra features make them more versatile and stable.

I ordered the C650s from Lowes and they arrived with paint chipped on the ends. It’s not terrible but I’m not sure what is a reasonable expectation. They were packaged at all, but merely wrapped with pallet wrap plastic. A bit of cardboard would have prevented the damage. What should one expect these days? Thanks

I went to my local Lowe’s yesterday with the intention of buying a pair of the C-650s before the sale ended. In spite of what I saw on their web site, they had no C-650s in stock. What they did have was apparently the replacement for the C-650, designated TBL-SH60. It’s not on sale; the price is 49.98. The only obvious change I could detect is that the hardware at each end has been changed from hex bolts with acorn nuts to Allen-head bolts with flat, low-profile heads. This might make it easier to store two of them together, because they’ll basically sit flat against each other. I hope there aren’t any cost-cutting changes that would make them less desirable than the old model, but I can’t tell for sure. I’ll probably go ahead and buy a couple. The only reason I didn’t was it was basically a shtshow in there. One register open, with a long line. The self-checkout also had a long line, and included a couple of families with kids and parents engaged in a mutual screaming match, and it was just more than I was willing to put up with.

Guess I’m the only one that bought the standard sh30 2 pack (c300). I have a large home shop that I build custom hot rods out of. These are way more than adequate for my use in here and for projects around the home/farm. The rigidity and space saving alone is worth it, and at 2 for 50… Ya just cant get hurt.