How to Calculate Husqvarna Trimmer Gasoline Consumption

How to choose a gas trimmer. detailed instructions

With the advent of spring, we, tired of the long winter from the white-gray monotony, sincerely rejoice in the appearance of green grass. However, this joy does not last long. Very soon, weeds grow so much that they have to put in a lot of effort to fight them.

An ordinary scythe is unlikely to become an assistant in solving this problem: few modern urban residents can use it, and it is good only in spacious areas where fruit trees, garden benches, fences, curbs do not come across at every turn.

Well, today there is a great alternative, easy to operate and convenient in confined spaces. lawn mowing, or trimmer. Now we will consider how to choose a good gas trimmer for grass cutting and take into account all the nuances.

Gas trimmer device

Numerous models of manual lawn mowers available on the market today differ in power (and, as a consequence of this, in their capabilities), weight, and the presence of certain additional functions that increase usability, but at the same time, the schematic diagram of the instrument remains unchanged.

An internal combustion engine is used as a power drive in any gas trimmer. By means of a rigid or flexible shaft, rotation from it is transmitted to the cutting element. a coil with cord (fishing line) or a special knife. The shaft is located inside a metal rod, at one end of which the engine and the fuel tank are fixed, at the other is a cutting head. A handle is mounted in the middle of the bar. Most often it is on it that the keys, buttons and switches are placed, with the help of which the operation of the trimmer is controlled.

The layout of the controls may vary slightly depending on the model of the tool, but, as a rule, this includes a button to turn off the engine, a throttle button that allows you to control the throttle of the carburetor, and a stopper of this button when pressed, making it easier to control with large volumes of work.

1. Gearbox.

6. Gas lever.
7. Lever.
eight. Gas lever lock.
nine. Barbell.
ten. Loop for fastening the carabiner belt.

eleven. Air filter.
12. Spark plug.
13. Motor housing.
fourteen. Exhaust manifold.
fifteen. Gas tank.
16. Starter.

Determine the type of gas trimmer

All the trimmers and lawn mowers available on the market today are divided into three classes, depending on their capabilities and purpose: domestic, semi-professional and professional. Which tool do you need? It depends primarily on the tasks that will be assigned to it.

Household gas trimmers

Household trimmers are designed for mowing low grass in a relatively small area, the area of ​​which does not exceed 10-15 hundred parts. As a rule, we are talking about caring for the lawn near the house. They are not capable of anything more: household trimmers do not withstand long work, 1-1.5 hours a day is their limit. Due to the modest in power (no more than 1-1.5 hp) and engine dimensions, such a tool is lightweight, which means that it can be used without special support belts.

Often household trimmers are equipped with a curved bar. The curved bar of the household trimmer increases its maneuverability and makes it easy to cut grass in hard-to-reach places, for example, around bushes. However, due to this design of the rod, a flexible shaft is installed inside, which adversely affects the reliability of the tool. Cord (special fishing line) is usually used as a cutting element of a household trimmer, although some knives sometimes include plastic knives as an addition.

Semi-professional, or farm

Semi-professional trimmers are often called farm trimmers, and this fully reflects their purpose. This is a reliable assistant to a resident of the countryside, designed for regular high loads. A similar tool is able to work already for 3-4 hours a day, mowing grass on a plot of 20-30 acres. Of course, such a trimmer needs a more powerful engine. 1.5-2.5 hp. Semi-professional models, unlike household ones, are always equipped with a straight bar and a rigid shaft, which increases their reliability. The cutting part is represented not only by the trimmer head, but also by knives. The latter will help to mow particularly tall and thick grass, moreover, they are able to cope even with weeds and branches of bushes.

Professional, or landscape gardening

Professional trimmer is a powerful tool for employees of urban improvement services, gardening enterprises and public utilities. It is equipped with an engine with a power of more than 2.5 hp, has an increased motor resource and is ready for many hours of daily work. In addition to the trimmer head, metal knives can be installed on such units, able to cope with dense shrubbery and unnecessary shoots of trees with a trunk thickness of up to 3 cm in diameter.

It is easy to guess that professional trimmers have a reinforced bar and a spacious fuel tank. Since such tools are quite massive, they are necessarily equipped with special belts to ease the load on the operator’s hands, and a professional vibration damping system. It is clear that to acquire a professional trimmer for cutting a lawn near a private house is simply not practical.

Type of gasoline engine

On gasoline trimmers, both two-stroke and four-stroke engines are installed. This is not to say that one or another variety has clear advantages. At least, there is no direct connection between the type of engine and its power. there are household models with a four-stroke engine, and professional models with a two-stroke.

2-stroke engine

Two-stroke engines compared to four-stroke ones, having a lower weight, operate in a higher speed range, which provides greater performance. Of course, two-stroke engines “eat” more fuel and produce a lot of noise and exhaust, but at the same time they bribe with their unpretentiousness in work. Work with a trimmer equipped with a two-stroke engine will have to start each time with the preparation of a gasoline-oil mixture, but if such an engine suddenly fails, it will most likely not be difficult to reanimate it.

4-stroke engine

Four-stroke engines are devoid of almost all the disadvantages inherent in two-stroke ones: during operation, they produce much less noise, the exhaust gas volume is significantly lower, and gasoline and motor oil are poured into different containers.

They are more economical in terms of fuel consumption and have a higher motor resource. All this, however, does not mean that four-stroke ICEs are ideal. No, they have their drawbacks.

The design of such an engine is more complex, which means that its maintenance and repair are more complicated. A four-stroke will always be heavier than the power of a two-stroke equal to it, which negatively affects the weight of the entire tool and, therefore, the ease of handling. And finally, a trimmer equipped with a four-stroke engine will be more expensive than the same, but with a two-stroke ICE.

It should be noted that along with the classic four-stroke engines there are also hybrid ones: they have a duty cycle of 4 cycles, however, the lubrication system is like that of a conventional two-stroke engine.

Engine starting system

The engines of most gas trimmers are started manually: sharply pulling out the cable (starter cord), you thereby unwind the drum, which in turn drives the engine crankshaft.

Some modern trimmer models feature the Flash Starter easy-start system. By pulling the cable, you cock a special spring in several stages, which, having accumulated energy, will transmit it to the crankshaft, which will become the impetus for starting the engine. With the Flash Starter system, the engine starts up easier, because the spring gives a faster spin speed than can be done by hand. The operator now requires less physical effort, because he no longer needs to make sharp jerks of the cord, the cable can be pulled slowly and smoothly.

See how the easy start of the gas trimmer occurs in the video:

To facilitate starting the engine, the power unit of the tool, as a rule, has a special button, a few taps on which before starting will ensure the supply of the required amount of fuel to the carburetor.

Tool power

How to choose a gas trimmer for mowing grass on a personal plot? And for processing the "plantation" with an area of ​​a couple of hectares? That’s right, focusing on its power.

The power of a gasoline engine installed on trim tabs can vary from 1 to 3-3.5 hp. The choice of tool for this parameter directly depends on the expected load. It is the power of the trimmer that determines its operational purpose. So, for mowing the lawn near the house, a simple tool with a capacity of not more than 1.5 liters will be enough. with. A far more powerful engine is installed on farm trimmers. from 1.5 to 2.5 liters. with. The whole range of trimmers’ capabilities can be demonstrated only by a professional tool with a power exceeding 2.5 hp.

It is clear that an increase in the power of an instrument inevitably entails an increase in its weight and cost. It follows from this that when choosing it is not necessary to chase thoughtlessly at high power indicators, but focus primarily on the planned scope of the tool.

Gas Trimmer Rod and Shaft

The trimmer bar, inside of which there is a shaft transmitting rotation from the engine to the working head, can be either straight or curved. The first is more reliable, the second is more ergonomic. Direct rods are installed on professional and semi-professional tools. The transmission shaft located inside such a rod is a rigid rod made of especially strong steel. The risk of damage to such a shaft, even at significant loads, is small.

On petrol trimmers with a hard shaft, the torque from the shaft to the cutting tool is transmitted through a bevel gear reducer. Gearboxes can be serviced and not serviced. The serviced gearbox has a process hole through which grease can be replaced or added. In non-serviceable greases, the grease is laid by the manufacturer for the entire service life. Some users find that an unattended gearbox is less durable. In turn, manufacturers note that this step is aimed at increasing the life of the gearbox, since according to statistics, very often, gearboxes fail due to improper dosing of grease or ingress of foreign objects during maintenance.

A curved bar is typical for lightweight household trimmers. It is more convenient to use a tool with a curved bar to cut grass in close proximity to bushes and trees, benches, a fence, etc. The downside of this convenience is the lower reliability of such tools. The fact is that in this case it is possible to transfer rotation from the engine to the cutting element only by means of a flexible drive, and the latter is more vulnerable than a rigid shaft, and its probability of failure is much higher.

The gas trimmer bar may be solid or collapsible. A one-piece transmission shaft (and this is a guarantee of reliability) can be installed only in a one-piece rod. But transporting and even just storing such an instrument is less convenient. A collapsible bar, consisting of two or more sections, on the contrary, provides compactness during transportation and storage. The drawback of the split rods is obvious: the transmission shaft must also disconnect, and any drive connection is an additional vulnerability. In addition, the earth, sand and other debris can fall into the rod during disassembly, which leads to premature wear of the working elements.

Handle type

Filigree control of a rather heavyweight unit is not as simple as it might seem at first glance. When choosing a trimmer, special attention should be paid to the handle configuration, on which the ease of use of the tool directly depends. There are several varieties of handles:

T. shaped handle, Outwardly resembling a bicycle wheel, it allows you to make wide movements and is convenient for quite a long work, so it can often be seen on trimmers of a professional and semi-professional class. All tool controls (starting, speed adjustment, etc.) are located directly on one of the handles, which greatly simplifies the work and increases safety.

J. shaped handle characteristic of light trimmers household class. With its help, it is easier to control the tool, performing fine maneuvering. All buttons necessary for the operator are located not on the handle, but on the bar.

D. shaped handle, as well as the J-shaped, it is installed only on light trimmers intended for home use, as it is designed to hold the tool with one hand.

Before choosing a gasoline lawn mowing machine, the future user must definitely hold it in his hands and evaluate the degree of convenience. It should be borne in mind that the handle of any type can be moved along the bar, adjusting the tool to fit your height and other individual characteristics and thereby achieving maximum ergonomics. It is convenient to work with gas trimmers with D and J-shaped handles in cramped conditions, narrow passages, which are not rare in household plots.

Belt system

Only a good shoulder strap is able to reduce the load on the hands when working with a rather heavy hand tool, redistributing part of the weight to the back and shoulders of the operator.

Shoulder system of belts. For comfortable use of a relatively light household trimmer, a simple one-shoulder belt is sufficient. If you have to work with a lawn-mowing semi-professional or professional class, we strongly recommend that you look after products with two-shoulder belts.

Knapsack belt systems although they cost more, but they distribute the weight of the tool more evenly on the shoulders and back of the user, which means they significantly reduce fatigue during hours of weed control.

Such satchels are often equipped with special bags for storing cutting equipment, as well as tools that may be needed to repair the trimmer in the field. A special pad, which manufacturers supply the belt system, protects the operator’s thigh from burns when it comes in contact with an engine that is very hot during operation and reduces the level of transmitted vibration.

Additional amenities

The presence of anti-vibration system

During the operation of the trimmer, vibrations occur, which is generally characteristic of any mechanism whose individual elements make fast reciprocating movements. Vibrations can cause the operator to experience significant discomfort while working, and with frequent use of the instrument, he may experience health problems, the most predictable of which is premature wear of the elbow joints.

A special anti-vibration system will help significantly reduce the vibration effect on the body of a person working with a trimmer. In the simplest and most common embodiment, it is a set of polymer gaskets located between different structural elements of the trimmer.

Anti-vibration lawn mowing system.

Such gaskets reduce the transmission of vibration and thereby provide normal working conditions for the user with the tool. Often, manufacturers to damp vibrations additionally separate the engine from the rod with special shock absorbers. Almost all the world’s leading brands equip their products with an anti-vibration system today.

Fuel tank capacity

The capacity of the fuel tank can vary from 0.3 to 1 liter, depending on the model. Which trimmer tank, large or small, should I prefer? Both this and the other option have their advantages and disadvantages. A large tank increases the weight of an already heavy unit, but does not require a frequent stop for refueling.

A tank of a smaller capacity, in turn, is smaller and heavier, contributes to more economical fuel consumption, but at the same time it does not allow for continuous non-stop operation. Choosing a trimmer by such a parameter as the volume of the fuel tank, you should focus on your physical abilities and the size of the area that you have to regularly mow. It is very convenient if the fuel tank is made of translucent plastic. this allows you to track the amount of fuel remaining in it during operation.

Device weight

The convenience of working with a trimmer directly depends on its weight, because the entire load falls on the arms and shoulders of the person performing the operation. If the tool turns out to be too heavy for you, then no matter how powerful it is and no matter how well the grass is mowed, the end result is unlikely to be satisfactory: you simply can’t work for a long time and manage it carefully, getting to hard-to-reach areas.

That is why when choosing a trimmer, you should definitely pay attention to the weight of the device, especially if you yourself can not boast of heroic strength. Do not chase power. In many cases, it is more rational to purchase a less powerful, but at the same time lighter unit: you will spend a little more time mowing your site, but you won’t get tired so much that you don’t finish the job.

Video: How to Calculate Husqvarna Trimmer Gasoline Consumption


What you need to know about working equipment

Either cord (a special cutting line) or knives can act as a working element of lawn mowers, directly cutting off excess vegetation. These are consumables, even if they are included in the factory tool kit, over time they will have to be purchased and replaced. The choice of equipment used depends on the tasks that you plan to solve with your trimmer, and primarily on the thickness and density of the grass to be mowed.

Trimmer head

Almost all trimmers are equipped with a trimmer head. a coil designed for winding a cutting line. According to the method of feeding the fishing line, all trimmer heads are divided into mechanical (you have to manually pull the ends of the line yourself), semi-automatic (the line is released when you press the wide button on the lower plane) or automatic (extension of the protruding ends of the line occurs automatically when the engine speed is reduced). Semi-automatic cord feeding is considered the most effective, such heads are most popular among users.

In addition, the trimmer heads can vary according to the maximum allowable diameter of the mowing line, which can be tucked into the reel. On household trimmers usually set fishing line with a diameter of 2 to 2.4 mm, on semi-professional. from 2.4 to 2.7 mm, on professional. from 2.7 to 3 mm.

When choosing a trimmer head, be sure to pay attention to the material from which its lower part is made. It is this part that is the most vulnerable, since it constantly hits the ground, and it is it that most often causes the trimmer head to fail.

For mowing especially thick grass, reeds, shrubs, young shoots of trees, not a fishing line is used, but special knives (cutters). On sale you can find a huge number of varieties of knives for trimmers, differing in material (metal or plastic), shape, number of cutting blades. By the way, cutters, unlike fishing line, do not chop grass, which means that they can be used for mowing for harvesting purposes.

Which knife to choose for your trimmer? When solving this issue, you should primarily focus on the manufacturer’s recommendations, indicating the possibility of using this or that type of equipment on this model. Excessive independence in the choice of knives and cutters can lead to failure of the trimmer.

Gas trimmer manufacturers

1. Today on the market you can find many trimmers "no name", usually Chinese-made. Of course, they are very captivating at their cost, but you should not hope for the reliability of such a technique. As practice shows, such an instrument quickly becomes worthless without even paying back its low cost. Of course, there is no question of any guarantees or service in this case.

2. A big plus when choosing a particular brand of trimmer will be the presence of an official representative of this brand in your region. This will guarantee that if your lawn mowing still fails, you will be provided with quick technical support. You can easily find spare parts for your product, and at prices that are not overstated by numerous resellers.

Do not forget to read the warranty conditions and make sure that the seller makes a mark on the date of sale in the warranty card.

You will be interested

How to choose a gas trimmer

With the development of suburban construction, trimmers are becoming increasingly popular: compact lawn mowers, necessary for weed control, grass mowing, gardening. This convenient thing allows you to care for the site, destroying any amount of excess vegetation. Several degrees of safety guarantee the user protection against damage and injuries.

How to Calculate Husqvarna Trimmer Gasoline Consumption

Petrol trimmer. This is a compact lawn mower that works with the gasoline engine located at the bottom of the appliance. Grass mowing is carried out due to the working part, presented in the form of a blade knife, fishing line or other device. In addition to gasoline, such a trimmer needs refueling with engine oil. Its most important advantages are lightness, compactness, ease of operation.

The main parameters of the device:

Power and type of engine. The wider the trimmer’s capabilities, the stronger the motor and the higher the fuel consumption. The engine can be lightweight (1 hp and below), simple (within 1-3 hp) and reinforced (over 3 hp). A two-stroke engine is much cheaper than a four-stroke engine, but more difficult to maintain, since to start it is necessary to mix engine oil and gasoline. Their service life is relatively less. A four-stroke engine is more complicated, respectively, its repair will be more expensive, but it has compartments for fuel and oil, and the noise and emissions are much lower.

Working (cutting) part. For mowing the grass, blade blades are used (suitable for eliminating any weeds, shrubs), as well as nylon fishing line. The second option is more affordable and safe, but its life is much lower. This part of the device needs to be replaced periodically and is a consumable.

Instrument handles and stabilization system. Professional devices are equipped with a control system resembling a bicycle wheel, which provides control of the device and ease of use. Buttons are at hand, and this makes the job much easier. Household trimmers are equipped with a ring-shaped handle, which is less convenient. Buttons are located on the bar, so reaching them is a bit more difficult. The stabilization (anti-vibration) system is designed to reduce the burden on the hands, as blood vessels burst from constant fluctuations.

Cutting width. The larger this parameter, the higher labor productivity. However, trimmers with a small cutting width are required for delicate work.

Gas tank volume. The capacious capacity allows you to work longer without refueling, but it makes the device heavier.
Additional options. The devices are equipped with convenient devices for starting the engine (for example, a decompression valve or a spring starter). Removable nozzles will help to change tactics in the fight against unwanted thickets, achieving greater success when servicing your site. Compression I have convenient devices to start the engine (for example, uki, as vessels burst from constant oscillation.

Define what types of gas trimmers are:

1. Household trimmers. The most common devices for mowing ordinary grass, which grows in any area. They have a two-stroke engine with low power (about 1 hp) and are characterized by low weight. Such devices are compact and most often have a flexible shaft. This, in turn, provides a high level of maneuverability, but a short service life. The buttons are located on the bar, so to turn on and off, you have to remove your hand from the handle. This is a good solution for domestic needs, but for more serious tasks it is completely unsuitable. As a rule, there are additional items in the configuration (gloves, mask), and this is a very pleasant trifle. It can be used without stopping for no more than 20-30 minutes, after which a short break (10-15 minutes) should be taken to cool the engine.

  • Pros. Flexible shaft (maneuverability, lightness), low weight, reasonable price, compactness, the ability to replace consumables.
  • Minuses. Inconvenient arrangement of control buttons, high noise level, short service life, weak working part, thin metal casing, many models are not disassembled, they do not have an anti-vibration system, limited scope of use (you can only mow grass), non-stop operation at short time intervals (20.30 minutes), pouring gasoline with oil (in a certain proportion, usually 1:40).

2. Professional trimmers. Such devices have a shoulder strap, additional protection from the working part, reinforced engine. Its power is more than 3 hp, respectively, the level of fuel and oil consumption is much higher. Instead of nylon fishing line, a screw knife is used, which cuts not only grass, but also small bushes, thick weeds. Anti-vibration system allows you to reduce the load on the hands, protecting them from overvoltage and, accordingly, from unpleasant physical sensations. There are also disadvantages, the most important of which is the high price of the solution. It is necessary to carefully monitor the engine, to avoid emergency operation, as during overload the engine may fail. After use, it is advisable to clean the device by removing any remaining grass.

  • Pros. A straight shaft (provides a long service life and ease of use), an anti-vibration system (eliminates such problems as overstrain of limbs during operation), convenient location of control buttons, shoulder strap, low noise (for four-stroke engines), various oil compartments and gasoline, the ability to install a cutter knife (for cutting thin trees or thick bushes).
  • Minuses. The need for careful maintenance of the tool, expensive maintenance and repair, increased consumption of gasoline and engine oil.

3. Universal trimmers. Such devices are an intermediate solution between household and professional models. Engine power is within 1-3 hp, and this is enough not only to combat unwanted grass, but also to trim thin bushes, young weeds. The working part can be made both in the form of a three-blade knife, and in the form of a nylon fishing line. As a rule, such a device is oriented to service a large area, but its own, and not for professional work. You need to take breaks with almost the same frequency as when using a domestic solution. But the maintenance costs are comparable to professional models. Fuel and oil consumption is at an acceptable level, but it also needs to be mixed when serving.

  • Pros. The device is distinguished by its average price, acceptable fuel consumption, long life, and versatility.
  • Minuses. The device requires careful maintenance, oil is filled with gasoline, the noise level is very high, and the anti-vibration system, as a rule, is absent.

4. lawn mowers. Professional models, adapted for the most serious tasks, strongly resemble ordinary trimmers. But, unlike them, devices are able to cope with a very difficult job: cutting thick bushes and young trees. This is achieved through a powerful engine (over 3 hp) and a series of nozzles, including a metal knife and a spool of polyamide thread. The rest of the device completely duplicates the professional trimmer: there is also a shoulder girdle, and control from the handle, and an anti-vibration system. But with this set of advantages, there are certain disadvantages: a very high price, the need for periodic after-sales service, and extremely expensive repairs. This solution is suitable for processing a huge territory and daily work, including many hours of non-stop labor.

  • Pros. The presence of several nozzles, a wide scope of use, low noise, high power, the possibility of long non-stop operation, full versatility, shoulder strap, convenient control directly from the handle, straight shaft (high strength and reliability).
  • Minuses. Very high cost, continuous service, high oil and gas consumption, heavy weight.

Summarize what was said in the table:

Types of gas trimmers
pros
Minuses
Models
Household
– Flexible shaft- Maneuverability- Light weight- Affordable price
– compact
– Ability to replace consumables
– Inconvenient arrangement of buttons. High noise level. Short service life. Weak working part
– There is no anti-vibration system (in most models)
– Limited use
– Filling gasoline with oil
– Small cutting width
HUTER GGT-800T, ZIGZAG GS 300 S, Mega BC 260, STERN Austria GGT-1600N
Professional
– Straight shaft. Long service life. Ease of use. Anti-vibration system
– Convenient location of control buttons
– Shoulder strap
– Low noise (for four-stroke engines)
– Various oil and gas compartments
– Ability to install a cutter knife
– Large cutting width
– Grass catcher (on some models)
– The need for careful maintenance of the tool- Expensive maintenance and repair- High cost- Increased consumption of gasoline and engine oil
Silen GT YS-GX35, Makita EM 2500 U, Hitachi CG22EJ, Alpina BS 29 DS, Husqvarna 143R-II, Husqvarna 323R II, Makita DBC 400
Universal
– Average price. Acceptable fuel consumption. Long service life. Versatility
– Wide scope of use (in comparison with household solutions)
– The need for thorough maintenance. Oil is filled with gasoline. High noise level. As a rule, there is no anti-vibration system
WattGarden WMT-1852LB, Husqvarna 122C, Eland GTR-145, Craftop NTBC 650
lawn mowers
– The presence of several nozzles. A wide scope of use. Low noise. High power
– Possibility of long non-stop work
– Full versatility
– Shoulder strap
– Convenient control directly from the handle
– Straight shaft
– Stabilization and anti-vibration system
– Very high cost- Constant after-sales service- High oil and gasoline consumption- Heavy weight
– Expensive repairs
– Special storage conditions
– As a rule, inseparability (only the working part is removed, but the bar does not disassemble)
ECO GTP-185, ECO GTP-145, Mega BC 305

Other useful tips for choosing gas trimmers:

Hold the device in your hands, check how hard it is to work with it, evaluate whether you can use it during the day.
When buying a gas trimmer, you should also purchase headphones, a mask, gloves, preferably a system of fastening the device to the body (the load on the spine is reduced). The shoulder strap is very convenient for non-professionals, since the device has to be held on outstretched arms, and for people with diseases of the back it is very harmful.
When purchasing a trimmer, pay attention to whether he understands or not. Since all devices have impressive dimensions, their storage and transportation in prepared form will be quite difficult.
When testing the device, make sure that the engine does not emit extraneous sounds and does not “spit” black smoke. This is a sure sign that he will not be able to work for a long time.
Regardless of which model is used in the work, she needs a periodic rest, which, moreover, is useful for the owner.

What to consider when choosing a gas trimmer:

  • Intended use. If the device will be used exclusively for mowing the grass and maintaining the lawn in a decent form, then the household option is quite suitable. For professional work or maintenance of a large area, a professional trimmer or lawn mower with a very powerful engine is required, which can be used without stopping for several hours.
  • Budget purchase. If you are significantly limited in money, pay attention to electric options that are several times cheaper than gasoline. But if funds allow, be sure to buy a professional trimmer. It is perfectly stored in any conditions and provides a long service life.
  • Frequency of use. For working within 1-2 hours a week, a household trimmer is suitable, for use within 3-4 hours a day. professional, but for the most complex and demanding tasks you will need a lawn mower.
  • The physical capabilities of the user. Household solutions are not only affordable, but also light in weight. It will be very difficult for a woman or teenager to cope with a professional trimmer or lawn mowing, as they have high power and create a strong vibration.

Read also:

  • How to choose a microwave

Contents: How many people are in the family. Microwave grill and convection. Microwave control. Wiring and microwave. It is very difficult for a modern person to do without microwave. This abbreviation means in plain language a microwave.

How to choose women’s nightwear

Contents: Types of women’s nightwear. Choose material and size. Each woman has her own considerable wardrobe. And naturally, among him there is also the clothes that we wear at night. There are very.

What style of curtains to choose for the kitchen

Modern models of curtains are not only an element of decorative decoration of the kitchen, but also perform a functional role. They protect the room from excess sunlight. Properly selected curtains can visually increase the space of the kitchen.

How to choose a gas trimmer?

With the development of suburban construction, trimmers are becoming increasingly popular: compact lawn mowers, necessary for weed control, grass mowing, gardening. This convenient thing allows you to care for the site, destroying any amount of excess vegetation. Several degrees of safety guarantee the user protection against damage and injuries.

Petrol trimmer. This is a compact lawn mower that works with the gasoline engine located at the bottom of the appliance. Grass mowing is carried out due to the working part, presented in the form of a blade knife, fishing line or other device. In addition to gasoline, such a trimmer needs refueling with engine oil. Its most important advantages are lightness, compactness, ease of operation.

The main parameters of the device

  • Power and type of engine. The wider the trimmer’s capabilities, the stronger the motor and the higher the fuel consumption. The engine can be lightweight (1 hp and below), simple (within 1-3 hp) and reinforced (over 3 hp). A two-stroke engine is much cheaper than a four-stroke engine, but more difficult to maintain, since to start it is necessary to mix engine oil and gasoline. Their service life is relatively less. A four-stroke engine is more complicated, respectively, its repair will be more expensive, but it has compartments for fuel and oil, and the noise and emissions are much lower.
  • Working (cutting) part. For mowing the grass, blade blades are used (suitable for eliminating any weeds, shrubs), as well as nylon fishing line. The second option is more affordable and safe, but its life is much lower. This part of the device needs to be replaced periodically and is a consumable.
  • Instrument handles and stabilization system. Professional devices are equipped with a control system resembling a bicycle wheel, which provides control of the device and ease of use. Buttons are at hand, and this makes the job much easier. Household trimmers are equipped with a ring-shaped handle, which is less convenient. Buttons are located on the bar, so reaching them is a bit more difficult. The stabilization (anti-vibration) system is designed to reduce the burden on the hands, as blood vessels burst from constant fluctuations.
  • Cutting width. The larger this parameter, the higher labor productivity. However, trimmers with a small cutting width are required for delicate work.
  • Gas tank volume. The capacious capacity allows you to work longer without refueling, but it makes the device heavier.
  • Additional options. The devices are equipped with convenient devices for starting the engine (for example, a decompression valve or a spring starter). Removable nozzles will help to change tactics in the fight against unwanted thickets, achieving greater success when servicing your site. Compression I have convenient devices to start the engine (for example, uki, as vessels burst from constant oscillation.

to content

Determine what types of gas trimmers are

1. Household trimmers. The most common devices for mowing ordinary grass, which grows in any area. They have a two-stroke engine with low power (about 1 hp) and are characterized by low weight. Such devices are compact and most often have a flexible shaft. This, in turn, provides a high level of maneuverability, but a short service life. The buttons are located on the bar, so to turn on and off, you have to remove your hand from the handle. This is a good solution for domestic needs, but for more serious tasks it is completely unsuitable. As a rule, there are additional items in the configuration (gloves, mask), and this is a very pleasant trifle. It can be used without stopping for no more than 20-30 minutes, after which a short break (10-15 minutes) should be taken to cool the engine.

pros. Flexible shaft (maneuverability, lightness), low weight, reasonable price, compactness, the ability to replace consumables.

Minuses. Inconvenient arrangement of control buttons, high noise level, short service life, weak working part, thin metal casing, many models are not disassembled, they do not have an anti-vibration system, limited scope of use (you can only mow grass), non-stop operation at short time intervals (20.30 minutes), pouring gasoline with oil (in a certain proportion, usually 1:40).

2. Professional trimmers. Such devices have a shoulder strap, additional protection from the working part, reinforced engine. Its power is more than 3 hp, respectively, the level of fuel and oil consumption is much higher. Instead of nylon fishing line, a screw knife is used, which cuts not only grass, but also small bushes, thick weeds. Anti-vibration system allows you to reduce the load on the hands, protecting them from overvoltage and, accordingly, from unpleasant physical sensations. There are also disadvantages, the most important of which is the high price of the solution. It is necessary to carefully monitor the engine, to avoid emergency operation, as during overload the engine may fail. After use, it is advisable to clean the device by removing any remaining grass.

Professional trimmer at work

pros. A straight shaft (provides a long service life and ease of use), an anti-vibration system (eliminates such problems as overstrain of limbs during operation), convenient location of control buttons, shoulder strap, low noise (for four-stroke engines), various oil compartments and gasoline, the ability to install a cutter knife (for cutting thin trees or thick bushes).

Minuses. The need for careful maintenance of the tool, expensive maintenance and repair, increased consumption of gasoline and engine oil.

3. Universal trimmers. Such devices are an intermediate solution between household and professional models. Engine power is within 1-3 hp, and this is enough not only to combat unwanted grass, but also to trim thin bushes, young weeds. The working part can be made both in the form of a three-blade knife, and in the form of a nylon fishing line. As a rule, such a device is oriented to service a large area, but its own, and not for professional work. You need to take breaks with almost the same frequency as when using a domestic solution. But the maintenance costs are comparable to professional models. Fuel and oil consumption is at an acceptable level, but it also needs to be mixed when serving.

pros. The device is distinguished by its average price, acceptable fuel consumption, long life, and versatility.

Minuses. The device requires careful maintenance, oil is filled with gasoline, the noise level is very high, and the anti-vibration system, as a rule, is absent.

4. lawn mowers. Professional models, adapted for the most serious tasks, strongly resemble ordinary trimmers. But, unlike them, devices are able to cope with a very difficult job: cutting thick bushes and young trees. This is achieved through a powerful engine (over 3 hp) and a series of nozzles, including a metal knife and a spool of polyamide thread. The rest of the device completely duplicates the professional trimmer: there is also a shoulder girdle, and control from the handle, and an anti-vibration system. But with this set of advantages, there are certain disadvantages: a very high price, the need for periodic after-sales service, and extremely expensive repairs. This solution is suitable for processing a huge territory and daily work, including many hours of non-stop labor.

Petrol trimmer-lawn mower (lawn mower) MATRIX BMS 1150

pros. The presence of several nozzles, a wide scope of use, low noise, high power, the possibility of long non-stop operation, full versatility, shoulder strap, convenient control directly from the handle, straight shaft (high strength and reliability).

Minuses. Very high cost, continuous service, high oil and gas consumption, heavy weight.