How to change a fishing line for a trimmer for a Huter benzotrimmer. Trimmer fishing line sticks together

Electric trimmer for Huter Get-1000s grass: Independent review

No doubt, beautiful and well.groomed lawns love everything. But not everyone likes to care for the grass, not to mention the fact that it requires strength, time and good tools. over, it is on the choice of the latter that the final result and the sensation of the process largely depend. To turn the lace cuts from work into entertainment, you should think about buying a new electric trimmer for the grass: quiet, compact, environmentally friendly and inexpensive. Such as Huter Get-1000s, to which this review is dedicated.

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to the reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

The first method of winding fishing

The required amount of fishing line is cut off. Now you need to carefully examine the bobbin to understand what type it belongs to. It depends on this how to wind the fishing line for the trimmer.

Spulks are of two types. In general, they are slightly different from each other. Regardless of the species, the coil is divided into two compartments. the upper and lower. In the first type, the dividing line does not close into the ring and has a deepening.

Read how to breed gasoline for a benzotrimmer

The second type is solid, but near it on the sides on both sides there are small through holes. The method of winding the thread must be studied depending on which of the above species the coil belongs.

How to wind a fishing line for a trimmer to a trimmer coil for Huter grass

• The previously prepared six.meter segment must be bent in half. Best not exactly in the middle, but so that one half turned out to be about fifteen centimeters longer.
• Then the bending place must be inserted into the recess in the dividing line. One half of the fishing line should be in the upper part of the coil, the other half in the lower part.
• Now you can proceed directly to the winding. You need to wind up in the direction in which the arrow on the bobbin indicates. When winding, you need to keep the threads so that they are not intertwined and the upper half is wound into the upper part of the coil, and the lower half into the lower part. Each half should remain free about fifteen centimeters from the end.
• There are small recesses (or, in other words, grooves) in the upper edge of the bobbin to fix the consumable. The ends of the threads need to be inserted into these recesses so that they are fixed one opposite the other.
• The final stage of refueling the consumable in the tool. the ends fixed on the bobbin must be put into the corresponding holes in the head of the trimmer for grass.
• That’s all. The winding process is completed. Now it remains only to collect the head into a single whole. The spring is neatly placed back between the bobbin and the head. Then you need to insert the bobbin into the head and press them to each other.
• Free ends of threads are recommended to pull out more tightly. To do this, take turns pulling the ends of the consumables so as to extract them from the grooves of the bobbin. You can make sure that the cutting element is extracted from the holding grooves, having tried to pull the threads a little. they must freely go through the holes in the head.
• Clutching a bobbin downward, you need to put on a lid over it. The lid must be screwed to the head so that all the grooves on their buildings are compatible and the bobbin remains between them.
• And finally, the very last action. the head is screwed back to its place in the lower part of the tool.

The process is completed. Trimmer fishing line is tucked up. Trimmer for grass is ready for further work.

Specifications

Frequent type of fishing line, which actually approaches all types of coils. This is a round cord. This is an ordinary fishing line for a trimmer suitable for mowing juicy grass, but it will be much harder to mow it with a dead wood breed, and all the more it will not manage with the bush.

Usually, the diameter that can be used for haircuts of young grass does not exceed 1.6 mm. The thicker the thread, the more difficult it overcomes the rough grass.

There are fishing lines with sharpened edges in the form of a sprocket or square, this option is more adapted for mowing dry grass specifically due to the existing sharp edges, but its deficiency. greater wear and it is inferior in strength to the fishing line for the trimmer. Round cord.

There are fishing lines with improved aerodynamics with appropriate dents, scales and notches, such a product is no less noisy, but it is used only on gas tanks, because the output of such a thread from the coil is difficult, in most cases it is used with discs into which segments are inserted. Minus of such a product. fragility.

In most cases, in gasoline trimmers with a engine of more than 1.5 liters.FROM. Use cords with an iron cable snut.

This thread is completely suitable for cutting dry grass and small bushes. The presence of a core has a positive effect on the wear resistance of this material.

The shortage of such a cord is its cost, which is significantly higher than the above enemies.

Two segments

The only difference does not differ from the method in the principle that two lengths are consumed in the place of one length of the winding of the fishing line.

There are two special nests for mounting on the coil (see. Sketch above).

They cling to it previously formed on the fishing line, and begin to wind a fishing line for a trimmer.

Winding is carried out on a special order.

The winding must be created in the future: at first the lower fishing line for the trimmer, in other words, the one that is closer to the openings for fastening at the bottom of the coil, and only later the upper one, t.E. The one that will block the lower part.

Tips are made in the holes in the body of the trimmer coil for the grass. They are pulled to a click, which means that the fishing line for the trimmer has come out of the clamps.

Tips are threaded into the holes in the coil of the trimmer coil for the grass.

The coil is attached to the body. a fishing line for a trimmer in a coil was replaced.

The first way

The prepared segment (in this case is four meters) bend in approximately half. One segment should be 15-20 cm longer, and insert into a special groove located on a dividing partition.

The fishing line for the trimmer is wound in the previously designated direction. This is done with an interference, a fishing line for a trimmer is neatly distributed. In this case, it is necessary to wind the segment, which is longer, on the site, which is closer to the button.

There are designs in which the separation of the coil into two sections is not foreseen. This does not change anything, the fishing line for the trimmer is wound similarly. You just need to make sure that segments do not overlap together.

The first should end the sector that is located at the bottom of the coil, t.E. Close to fasteners.

This tip enters the corresponding hole in the diameter. Trimmer fishing line is firmly fixed.

The long segment is wound for another half turnover. There it is in the same way fixed. In this case, the segment crosses another part of the coil.

The long segment is wound for another half turnover

Reflated ends of the spiral fishing line are inserted into the holes of the trimmer coil body for grass.

Reflated ends of the spiral fishing line are inserted into the holes of the trimmer coil body for grass.

The coil is attached to the body. The ends of the fishing line with force are pulled up so that the fishing line for the trimmer, previously fixed in the holes of the coil, jumps out of there. Just find it out by the corresponding sound (click).

The ends of the fishing line are pulled up with effort

The coil with buttons is clung in the body of the coil of the trimmer for the grass.

The coil with buttons is clung in the body of the coil of the trimmer for the grass.

The fishing line for the trimmer was successfully changed. In this case, you must again put it on a trimmer for grass, and you can start cutting grass.

It should be repeated, the coil from the trimmer for the grass does not need to be removed. This was made to clarify the process of substitution of fishing line. You can disassemble the coil in place, wind up and put it back.

Tips so that they do not touch the trimmer cover for grass, it is possible and necessary to trim.

How to wind a fishing line for a trimmer to a trimmer coil for the grass: to refuel which is better, change

Most inexpensive electric and gasoline trimmers use a fishing line for a trimmer as a cutting tool. Promoted to high speeds, it easily cuts the grass. Instructions on how to wind a fishing line for a trimmer to a coil of a trimmer for grass, the manufacturer does not give.

Preliminary preparation

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for grass certain acts will depend on the difficulty of configuration and the type of product itself:

• Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. Playing a gasoline trimmer for Champion grass. With the simultaneous press on their highest part of the coil, together with the internal contents for winding the fishing line is disconnected, while the lower remains on the trimmer. Disassembling the engine of the Echo grass. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
• Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. The device of a trimmer for grass is gasoline Husqvarna. After disconnecting the nut, the whole bobin is removed.
• Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. Assembly of a trimmer for grass Patriot Video. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. Adjustment of the carburetor of the Partner grass. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. WALBRO carburerator for trimmer for grass adjustment.

In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other.

If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Refueling coils with a thread of various types of rods

It should be noted that there are several types of reels for fishing tackle:

For each type of an oreuric coil, its own diameter of the fishing thread is designed. If the thread is thicker, then it will not work to be tucked into the coil. Difficulties will also arise if, for example, a too thin monophile, not designed to refuel one or another spoon, is used.

In the case of refueling the aphinnerization spool, one of two well-known methods is used:- “cross-on-cross”;- parallel winding, that is, the thread behind the thread lies parallel to each other.

It is worth remembering that not a single coil should be crowded with fishing line, that is, to the very top of the limiting sides. There should always be some reserve.

Multiplier spawn are subspecies of inertial. Many fishermen make the same mistake, they tie the end of the string over the farthest hole of this element.

This is wrong, it is worth tuting only for close holes.

The refueling with a fishing thread by a multiplier coil occurs according to the following scheme:

• First, the mononym is fixed on the body of the spool.
• Next, you need to attach the coil to the spinning and skip the free end of the forest through the right ring.
• Tighten the device that protects the tackle from fish jerks.
• Tighten the axial brake.
• Now you can wind it, directing the fishing line for the trimmer and, thereby, controlling it.

How to remove or refuel a fishing line for a trimmer in a trimmer for grass

In order to wind a fishing line for a trimmer, it will take about 10-15 minutes. What is the coil of a trimmer for grass? Plastic case with a cassette inside, on which there is a special hook for convenient winding of fishing line.

Almost all the coils of the trimmers have a similar attachment principle, this is a central screw-button, when pressed, it becomes possible to stretch the fishing line for the trimmer of the required length. The photo below shows several examples of various coils for trimmers.

Bobbins of the trimmers, the motor of which is located near the ground, have a different fastening to the rotation axis, they have two buttons on the coil located on the sides that need to be squeezed, the rest of the thread is no different from the other cassettes.

The principle of proper winding of the fishing line is similar in all of the above cases, so for example, consider the standard option with two antennae.

To remove the coil with a fishing line, you must unscrew the screw in the center, but keep in mind, the thread there is left, so you will have to twist clockwise, it is specially so that it does not open under the influence of centrifugal force during operation.

Next, using the screwdriver, disassemble the head and remove the coil, on which the fishing line for the trimmer is directly wound.

Having measured the required length and folding it in half, you need to tuck a fishing line for a trimmer into a coil, bringing it out, as a result, its ends opposite each other (for this there are special slots for fixation).

After that, it is necessary to assemble the head in the reverse order, passing the ends of the cord in two corresponding holes.

If there are doubts or it is not entirely clear how to charge a fishing line for a trimmer for a trimmer for grass recommend that you see how to correct the fishing line for a trimmer into a lawn mower.

In this video, the instructor will open a trimmer head in detail by steps, it will measure the required amount of fishing line, as a rule, this is from two to four meters, and demonstrate the assembly and installation for a trimmer for the grass.

Operating conditions

Before using a gasoline trimmer for grass, owners should make sure that the box is lubricated. Apart from the proper use of this device, you should familiarize yourself with all the standards contained in the operating annotation. There are also safety standards, tips on the abilities and methods of effective work, as well as proper carriageway.

Когда юзер со всем этим ознакомится, он может запустить бензорезку и начать работать в устройстве. It should be carried out during the first 3-4 hours of work

At this time, you should handle a bureaulus very carefully. On a soft grass, it is better to do it evenly

Under no circumstances can it use it in the waiting mode for more than 10 minutes. These periods should always be alternated with breaks and pauses of 20-30 seconds. During this period, adjusting and adjusting the operating modes of a gasoline trimmer for grass is also carried out. It will not be unnecessary to have a spare fishing line for a trimmer, so that in the event of a breakdown or unsatisfactory operation of a standard strip, you can change the fishing line for a trimmer to a more benign.

How to wrap a fishing line for a trimmer for a trimmer for Huter grass

March 22, 2018. How to change a fishing line for a trimmer trimmer for grass and how best to choose. How to wind up a coil now let’s talk about how to wind. Trimmer for Huter GGT 2500S Video grass I bought a gasoline trimmer for Huter GGT2500S Hello Hello Hello everyone. Gasoline trimmer for Huter GGT 1300T HELL.

With a GGT-1500S gasoline trimmer, the arrow consists of two parts and can be easily assembled without tools

But if you do not need to transport the tool to the mowing position, you should pay attention to his “twin brother” with a strong bar GGT-1500T. The position of the handle on the trimmer is adjustable in height for the optimal balance

Shoulder belt bothers your hands as much as possible. Thanks to an effective anti.vibration system, prolonged work will be performed without excessive fatigue. The plastic case protects the operator from throwing grass, branches and stones from under the cutting block.

Features of a trimmer for grass Huter GGT-1500S-safety operation HUTER GGT-1500S Safe Operational Call prevents grass on the operator. Convenient control GGT-1500S Convenient control of the recover fuel tank. for convenient tracking fuel consumption. Convenient installation of the HUTER GGT-1500S tool, convenient installation of the tool, convenient bicycle handle of a gasoline trimmer for grass Huter GGT-1500S. for uniform natural movements of the operator during operation. Easy transportation Huter GGT-1500S light transportation.The advantages of the Huter GGT-1500STA engine are established. 1.5 kWhn both young grass and dense growth.Electronic ignition.Vibration extinguishing system.

How to change a nylon fishing line for a trimmer on a trimmer?

To fill the shock head of a lawn trimmer for grass with a nylon fishing line for cutting grass, the shock head will need to be previously removed from the drive shaft and disassemble.

The disassembly process is simple. There are visible grooves on the head of the head that actually indicate the fasteners. In these places of the cover of the lid, it is necessary to create a small pressure, while stretching the lid.

Operation on the analysis of the module case where the nylon fishing line for a trimmer is refueling, acting as a cutting tool of a trimmer for grass in the mode of cutting the grass of lawns

To lay a new nylon fishing line in a trimmer for grass, about 3 meters of material in each groove (6 meters in total), designed for this plastic coil. Previously, the coil is removed from the spindle with the spring and the puck. The remnants of the previously refueling nylon fishing line from the coil must be removed.

Next, take a pre.purchased nylon fishing line for a trimmer (diameter 2.5 mm), rewind 6 meters of the product, cut off a measured piece. The resulting segment of the fishing line for a trimmer for the grass is folded in half. The end part of the nylon fishing line in the place of a half bend forms a kind of loop.

Winding of nylon fishing line on the reel

At the next stage of the operation, the coil of the head of the trimmer for the grass of the lawn is grasped with the palm of the left hand, holding in the position, as shown in the picture below. With the other hand, throw the loop of the nylon fishing line into the protrusion of the central side, dividing the winding area of ​​the coil into two sectors.

Laying nylon fishing line in a trimmer for grass, or rather in the sectors of the coil. Loop version of the stop of the material before winding. Some trimmers for grass lawn (garden) have other options for the stop (mount)

Win both halves of the nylon fishing line evenly and tightly counterclockwise (or on the arrow indicated on the coil body). Stretch. wrap the slings without twisting one sling from the other. The winding ends when the residual ends of the nylon fishing line are about 150 mm long.

Then they insert the coil back into the spindle and pass the remaining 150 mm ends of the nylon fishing line into spindle grooves specially provided for these purposes. Then the spindle part of the assembly is rested on the palm of the left hand and on the opposite side of the coil is installed in the place of the washer and the spring previously removed.

The assembly process. installation of a wound coil: 1. the production of the remaining 150 mm ends of the nylon fishing line in special grooves of the spindle; 2. installation on the coil of previously removed elements

This is the replacement of the fishing line in the trimmer ends, the assembled module is installed on the drive part, as was considered above in the text. Meanwhile, many models of trimmers of lawn (garden) are also supplied with bush cutters, the use of which also requires installation procedures.

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

• the base of the mowing head;
• button for semi.automatic supply of the cord;
• Spulk (coil), into which a fishing line for a trimmer is refuel;
• spring;
• eyes. through them a fishing line for a trimmer goes outside;
• trimmer head cover;
• Trimmer fishing line (cord).

There are also simpler trimmer heads shown in the next photo.

All these nozzles do not allow you to change the length of the fishing line in semi.automatic mode (after pressing the button). In the case of a break in the cord, you have to stop the mower and change it manually.

Method 2. how to dress a fishing line for a trimmer to a coil of motorcycles with a photo description and video

The second method differs from the first in that not a whole piece of equipment is charged into the coil, but segments of two parts. Manufacturers use this way, and it is also suitable for those who have the remains of the material. The principle of how to insert two segments of the fishing line into the tip of the motorcycles, the same with the first way, and to make sure of this, below is a detailed instruction:

• There are two equal lengths of the segment of the material that you can use
• One segment is taken, and the edge is bend in the form of a clamping bracket or hook, with which the fishing line will be fixed
• Inside the coil, there are holes in the form of a bracket for fixation, which are there for a reason. If they are not, then the second option will not work. The appearance of these brackets is shown in the photo below. Each bracket is on its own
• The line of fishing line should catch on the bracket, and make it wound in compliance with the direction of the arrow
• The equipment is wound until the segment of 10-15 cm remains, which is fixed in the corresponding hole on the side of the tip
• The same manipulations with the second end of the fishing line are carried out
• The protrusions are starting into the holes of the head, and then, extracting the equipment from temporary fasteners in the coil, a cover with clamps is installed

The above instructions on how to install a fishing line for a trimmer in a motorcycle will help not only correctly, but also quickly perform a replacement procedure. The assembly of the coil of the trimmer for the grass, as mentioned above, can be performed without removing the head, but in this case you will need to conveniently fix the tool. Video Instruction is presented below.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Coil with one working osik

The easiest option and a simple sequence of actions:

• The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
• One end of the fishing line is inserted into the fixing technological hole located inside the spool.
• The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
• A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
• The left end of the fishing line is passed through the hole of the outer part of the bobbin.
• Half of the bobbin are collected and put on the bar of the trimmer device.

Which line for trimmer is used for a trimmer for grass?

The type of cross section of the cutting thread should correspond to the vegetation that needs to be mowed.

If you need to change the fishing line for the trimmer, then you need to select specifically the type that is recommended by the manufacturer specifically this model of the trimmer for grass, in other words, the thickness of the cutting thread should be suitable for the power of the motor and the size of the unit.

It is better to choose a specialized cutting thread. It is worth soaking a fishing line for a trimmer for some time if you plan to change it in a coil.

After soaking, it acquires an elastic look and becomes stronger.

The cutting thread can be made of various components. Often found in the middle of them. nylon.

This material is characterized by the highest degree of wear resistance, the ability to withstand different temperatures and the highest loads.

A fishing line for a nylon trimmer can be stored for a long time, it does not dry out and does not lose its hardness.

Therefore, its service life can be quite long.

Coils or heads for motorcycles have a different structure:

• One.built. In the modification of such a trimmer for the grass there is only one working fishing line for a trimmer. Such an unit is used in the main thing for small work, such as ending the grass.
• Two.string. Can be both automatic and automatic. Here the equipment includes two strings. Such a trimmer is used for herbs for mowing and clearing sites.

Annotation on the proper wound of cutting thread on the coil of a trimmer for the grass:

First you need to disassemble the head. To do this, press on the latch and turn the lid to the side

Next is extracted by a spool. Measure the right amount of cutting thread and stick it into a slot. From 2 sides, wind a fishing line for a trimmer in the direction of the arrow. The ends of 15 cm long should be thrown out of not wound. These ends are inserted into the reverse slots. Then the ends are fixed in the hole on the head

After that, the spool is carefully inserted into the case, for this you need to press a little on it. If necessary, then you can remove the remaining ends of the thread outward

To do this, you must first pull one end of the thread, and then the other so that they can simply pass through the slots on the head. Now you should assemble the grooves on the case and tighten the lid. After that, press on the rogue and test it to the stop

If a click was heard, the slopes snapped up. Next, it is necessary to stretch the free ends of the thread to the end.

How to wind a fishing line for a trimmer to a trimmer coil for grass?

Despite the fact that garden equipment has been used for a long time, for some owners of private houses, it is still novelty. That is why questions often arise about how to correctly Win A fishing line for a trimmer for an electric or gasoline trimmer for grass.

This is essentially a simple operation, but all its stages need to be performed correctly in order to achieve the desired result. over, in the operating instructions only a few manufacturers give an answer to this sore question. Study the article and find out how the fishing line for a trimmer is wound on a trimmer coil for grass.

The procedure for winding the fishing line on the coil of a trimmer for grass

First of all, you should know that trimmers for grass have different working nozzles. The coil can be designed for different lengths and thickness of the fishing line. this moment should be taken into account when purchasing consumables.

So, how to charge a fishing line for a trimmer into a trimmer coil for grass? All work is divided into several stages:

• First you need to disassemble the head of the trimmer for the grass.
• Unscrew the nozzle, rotating the drum to the right.
• Press your fingers on two latches located from different sides of the pilots, and remove the top cover of the nozzle. You can put the lid with a screwdriver. This should be done neatly: the drums with automatically feed the fishing line have a spring, which can forcefully discard the lid along with all the contents of the coil.
• Remove scraps of old fishing line.
• Now you need to find the middle of the fishing line. To do this, shake it for the required length (for example, 10 m), cut and fold it in half.
• Hook the middle of the fishing line for the existing recess or insert into the hole, specially intended for this. And start winding. The direction is indicated by the arrow, which is usually applied to the body of the coil of the trimmer for grass (usually against rotation of the drum). Some models have a bilateral coil: in this case, wrap a fishing line for a trimmer in different directions: one end. one direction, the other. to the other, the loop of the fishing line must be brought into the dividing gap located in the middle.
• Leave the free ends of the fishing line about 20 cm long each. Later they will need to be fixed in the recesses.
• And finally, the last step will be the assembly of the drum. Install the washers and spring in place. There are two recesses on the upper ring of the coil, where you need to season the antennae of the fishing line. Pass them in the holes and set the coil in the drum, trying to tighten the fishing line for the trimmer and at the same time do not shift the spring.
• Place the drum cover on top and close it with your fingertips. The latches will become in their place with a characteristic click.

When you turn on the trimmer for the grass, the excess fishing line for the trimmer itself is cut off with a blade of cutting.

As you can see, it is not difficult to wrap a fishing line for a trimmer to a trimmer coil for the grass: the main thing is to do everything right. And here are a few more tips that will be useful to you when choosing a fishing line, its winding and subsequent work:

• Fishing line for a trimmer can be of different thicknesses and with a different section. The best option for winding is the “native” fishing line for this model for a trimmer;
• In no case do not use a fishing fishing line for a trimmer or metal cables for a trimmer for grass. Such a replacement may seem effective, but it is very dangerous. Having jumped off the working trimmer for the grass, the cable can seriously injure not only the lawn mower itself, but also others;
• The fishing line for a trimmer is cut off when a working trimmer for grass is in contact with solid objects. Try not to allow this, otherwise you will have to stop every time, turn off the device and again wind the fishing line for the trimmer to the coil;
• For cutting lawn grass, use a regular fishing line for a trimmer, and for rough weeds. a fishing line for a trimmer in the shape of a pigtail. It is more durable, and will not constantly cut off.

Fishing lines winding algorithm

The procedure for winding the fishing line depends on the type of coil. with one or two antennae, as well as with automatic charging the cord.

Design

• Pen: with adjustable height
• Decy material: plastic
• Building Material: Plastic
• Ring: Direct
• Handle shape: T-shaped (bicycle)
• Anti.vibration system: there is
• Wheels: absent

Comment

For a summer cottage I purchased a gasoline trimmer for grass. His engine power is 1000 watts, this is enough for personal use. For mowing, you can use a fishing line for a trimmer or a knife with a mowing width 255 mm. During use, I have established myself on the reliable side, I am satisfied.

Comment

I dash 20 acres of average storm 🙂 Power is really felt when it works 🙂 The starter changed twice (the plastic hooks are very flimsy), I advise you to immediately take a spare. 2 hexagons included the wrong size (it’s good that it was your set). Measured bottle of horror 🙂 After the purchase, I advise you to stretch everything to where the hands will reach (without violating warranty seals). The coil almost immediately went to the furnace, put the sky and earth from Khuskvarna. Foil candles, you need to buy. The main jamb in my copy. with vibration, the adapter from the cylinder to the carburetor is unscrewed (you need to remove the carb.) So if the trimmer for grass neither wants to be adjusted, try to move the carburetor shows that it walks slightly, remove, twist and all the norms. In general, the thing is good and necessary, if I think, I think and the serious weeds will take, but the assembly quality and equipment are below the average.

Disadvantages of gasoline braid for Hunter GGT 1500S

• the noise of the trimmer for the grass;
• a small list of functionality (mainly, the lawn mower is used for processing lawns, grass haircuts);
• Higher price (average price segment).

Advantages and disadvantages of gasoline braid for Hunter GGT 1500S

• convenient fast ignition;
• vibration suppression system (allows the operator to get tired less during work);
• easy to track fuel due to translucent fuel tank;
• powerful engine;
• It is convenient to hold and carry the tool due to small weight;
• a collapsible bar saves place when transporting a lawn mower;
• good build quality and key spare parts for the price are greater than Chinese analogues.

The main purpose of the trimmer for Hunter GGT 1500S

• hay mowing;
• lawns care;
• mowing dense thick grass in wild areas;
• mowing soft varieties of grass in the country, on the site in front of the house;
• Giving the form to soft shrubs with thin branches.

Thanks to some technical parameters, using a trimmer for Hunter GGT 1500S grass is very convenient. For example, to change the worn fishing line for a trimmer, the operator can simply hit the surface of the earth, after which the fishing line for the trimmer will be automatically replaced by a piece of the desired length.

Basic equipment of the lawn mower Hunter GGT 1500S

The shape of the thread

Choose a fishing line for a trimmer not only in thickness, but also in form, this is why: the cord does not cut the stem, but interrupts it. The rotating string hits many times on the surface of the stem and, in the end, separates its upper part

For such work, the shape of the cutting edge is an important technical characteristic

Round is the most common, as it is universal: you can choose it for not the fresh and dry grass. It is considered less noisy, especially spiral. But this parameter is not important in all cases. Lines for a trimmer for a gasoline trimmer for grass can be arbitrarily noisy, all the same, it is inaudible behind the engine operation.

• Polygonal. from 3 to 6 faces. A sharp cutting edge copes better with rough thick stems. So, a square cord with a section of 2.4 mm is able to remove the stems of the raspberry. It is worth noting that with higher efficiency, the polygonal cord is consumed faster, and it must only be used as intended.
• Curly. asterisk, ribbed, in the form of a twisted square with recesses and so on. “Specialization” is different for them, which is desirable to learn about in the instructions before choosing. So, the asterisk is recommended for mowing fresh grass, as it is less traumatic: the grass does not dry after the haircut, as when using a round string. In the photo. a cord with different forms.

Installation of fishing fishing line: pros and cons of

Sometimes a conventional fishing fishing line for a trimmer is installed in the drum of a garden trimmer for grass, instead of a special one, it is just a waste of time. The fishing fishing line for the trimmer is too soft and is erased many times faster than the traditional option. She can really mow grass, but such non.standard use is poorly suitable for her. A fishing fishing line for a trimmer can be used exclusively, as a spare option, if there is nothing else at hand.

It is also worth considering that it should be quite thick. It is better to insert a fishing line for a trimmer with a thickness of at least two millimeters into the lawn mower. By the way, difficulties may arise with its installation if the grass trimmer model provides for winding on the coil.

Fishing line for a trimmer. varieties and the ability to replace other material

A cord for a trimmer for grass can be of different diameters (from 1.2 to 4 mm), and it must be chosen depending on which vegetation is required to mow. the thicker the fishing line is for a trimmer, the more rough grass it will cope. Experienced users recommend putting a fishing line for a trimmer 2 mm thick, which is a universal.

The shape of the fishing line can be round (for juicy grass) or with sharp faces in the form of a square or asterisk (for beveling dry grass). The second type is less durable and wear out faster compared to the round cord.

One of the popular issues regarding the work of trimmers is whether it is possible to replace a special cord for mowers with other materials, for example, metal or steel cables and strings, wire, etc.D. You need to know that the installation of such items is not recommended, because along with them the trimmer for grass turns into dangerous equipment. During the mowing, pieces of wire or metal will constantly break off and fly off in different directions, risking to injure the employee. And if you accidentally touch their limbs during work, a serious wound is provided.

Owners of trimmers interested in whether it is possible to use a fishing fishing line for a trimmer, we answer. this is allowed, but it will be much faster to tear and wear out, which means it is a frequent replacement.

Winding process

If your coil is designed to work with only one osmus, then everything is simple here. It is necessary to rewind 2-4 m of fishing line (depending on the size of the coil), find the hole for the trimmer on the inside of the coil, insert one end of the fishing line there and start to wind the fishing line for the trimmer in the direction in the reverse direction of rotation of the coil at the trimmer. The inside of the coil is usually indicated with an arrow in which the side is to wind a fishing line for a trimmer. Having wiped a fishing line for a trimmer, we leave its small piece unnecessary to put it out. We fix this piece in a special groove located on the inner part of the coil and designed so that at the time of collecting the coil of the fishing line for a trimmer does not unwind. If there is no such groove, then you will have to hold a fishing line for a trimmer with a finger, so as not to let it unwind during the further collection of the coil. Next, we take the outer part of the coil and spread the outer piece of fishing line into the available hole, collect and put the coil back to the trimmer for the grass.

If the coil is designed to work with two antennae, then we do the following. On the inside of the coil, we look at how many grooves are available for winding fishing. There may be one or two of them. If the groove is one, then both antennae are wound on this one groove. If there are two grooves, then each antennae is wound in a groove. The coil with one groove should have a through hole in which a fishing line for a trimmer is threaded. We open 2-4 m of fishing line, we extend it through this hole so that on each side of the fishing line it sticks the same. And we will simultaneously wrap both the antennae of the fishing line in one direction, the reverse direction of rotation of the coil in the trimmer and coinciding with the direction indicated by the arrow available on the inner part of the coil. We leave a little fishing fishing line, we fix the resulting ends in special grooves, and if they are not, we hold with your fingers. We spread both ends into the available holes on the outer body of the coil. Collect the coil and fasten it to the trimmer.

In the presence of two grooves, a piece of fishing line 2-4 m long is folded in half, we insert the loop in the groove between two grooves at the bending site, and we wind both the ends of the fishing line each in its groove at the same time. Further actions are similar to the previous option.

There are also coils, in which a fishing line for a trimmer is threaded through a through hole on the inside. After that, the ends of the fishing line, without wrapping, spread completely through the holes on the outer body of the coil, collect the coil and begin to rotate the button that is usually pressed in order to release the fishing line for the trimmer while it is worn out. Rotate the button. inside the trimmer fishing line is wound itself. At the same time, it will not work to twist it in the “wrong” direction, since it can spin only in one direction. If you get used to it, then you can wrap a fishing line for a trimmer to such a reel without even taking it out. you just need to combine the through hole of the internal drum with holes on the outer body of the coil, and then pass the fishing line for the trimmer in them.

That’s all on this issue. Successful winding!

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

• the base of the mowing head;
• button for semi.automatic supply of the cord;
• Spulk (coil), into which a fishing line for a trimmer is refuel;
• spring;
• eyes. through them a fishing line for a trimmer goes outside;
• trimmer head cover;
• Trimmer fishing line (cord).

There are also simpler trimmer heads shown in the next photo.

All these nozzles do not allow you to change the length of the fishing line in semi.automatic mode (after pressing the button). In the case of a break in the cord, you have to stop the mower and change it manually.