How to Change the String on an Echo Trimmer Bump Head. Weed eater bump head
How to Choose String Trimmer Weed Eater Head
It is every gardener’s dream to have a clean and well-landscaped garden. According to the American Institute of Stress, gardening is an effective stress-reliever. It is being proven to help manage stress on so many levels. But if you happen to still see overgrown weeds surrounding the area, this can rather spoil your mood. To be honest, this unfavorable sight can be quite unnerving. Thank goodness! The innovations in technology allow us to deal with these stubborn turfs in a jiffy. With the use of garden string trimmer, cutting away the grasses in the lawn has never been easier.
Then again, nothing lasts forever. Every now and then, trimmer heads can get all worn out and may need some replacement too.
Lucky for you, you have come to the right page. In this article, we will present to you different valuable tips. This will guide you in buying the right string grass trimmer and its weed eater head. Let’s begin!
The Basics of Grass String Trimmer
Before going straight through the topic, let us tap in with the basics first. In this manner, you will gain a better understanding of what you must buy.
A grass trimmer is a garden tool used for cutting grasses and groundcovers. Unlike other grass cutters, this uses a monofilament line rather than a blade.
Grass trimmers are also called by different names. This includes line trimmer, string trimmer, brush cutter, weed whacker, or weed eater. So many terms but they all refer to the same device.
Different Types of Grass String Trimmer
Grass trimmers may come in different types too. This is important to discuss as the weed eater head depends on the kind of grass trimmer model you use.
Electric String Trimmer
The electric trimmers are best known for their lightweight structure. Thus, they are easier to maneuver compared to other styles. over, its motor is much quieter and requires lesser maintenance. They do not need gas or any form of oil to function.
Electric weed eaters are more suitable to use for light-duty trimmings. Also, it can either come with cord or cordless.
Corded electric trimmers may need an addition of long extension wires. This will enable users to go farther away from the power source. They are also often priced cheaper because of the limitations it imposes.
Our top picks for corded electric grass trimmers:
Meanwhile, the cordless versions are the battery-powered type. It uses a rechargeable 12-volts battery to work. Thus, no extension wire is necessary for this. Although it would be helpful to buy a spare battery pack. This will compensate for the short run time.
Cordless trimmers are popular with consumers because of its portability. The usage of the battery allows it to work in locations where the power source is not always available. Thus, its wirelessness makes it a good choice for cutting grasses even in off-grid areas.
Gas-Powered Grass String Trimmer
The gas-powered trimmers are heavy-duty grass cutters made to cater to larger lawns. It can cut through thick weeds and brushes with ease. Thus, it is among the top choices of most professional gardeners.
As the name implies, it uses gas and oil to function. The motor of this trimmer comes in two types, two-stroke or four-stroke. Apart from the obvious power capacity of the motor, there are lots of differences between the two.
Walk-Behind Grass String Trimmer.
The walk-behind string trimmer is a heavy-duty type of weed eater. They are also called wheeled trimmers because of its mobile structure. The two large wheels make it easier and faster to maneuver around the lawn.
It also comes with a powerful engine and a wider cutting width. Thus, they are perfect for cutting thick overgrowths with much less effort and half the time.
Different Types of Weed Eater Heads
Whatever type of grass trimmer you opt to use, the weed eater head is likely the most important accessory of the device. That is because this component does all the trimming work for you.
In general, there are three main systems of string trimmer heads:
Bump Feed System
The bump feed system is the most common type of trimmer head. It is easy to use and very much dependable thus its popularity in the market. As the name suggests, it functions by bumping or tapping the bottom of the equipment right onto the ground.
This trimmer head uses lines in various lengths all wound up into the spool. As you bump or press the trimmer head against the surface, this then triggers the spring. The squeezing of the spring releases the string from the spool. This said line is what cuts the grasses and the overgrowths.
The bump feed system uses a simplified mechanism in advancing the strings. So, if you ever encounter any technical problems, it is more likely easier to repair too.
The manual bumping gives you better control over the string advancements. But after some time it can take a toll on the head as well. Continuous usage makes it more prone to wears and tears and untoward damage. As a result, it may need replacement of the trimmer head more often than other types.
Automatic Feed System
The same with the bump feed system, the automatic trimmer head also uses a line-spooling motor. But unlike the former type, this requires no effort to function at all. The automatic mechanism advances the line using centrifugal force. Thus, delivering continuous cutting of the grass and overgrowths.
Apart from the obvious convenience, the automatic feed system also uses less line. The line is only set to advance if it reaches a certain length. In that sense, the string is being maximized to its fullest.
over, using an automatic trimmer will get you to finish trimming the lawn faster. Since constant tapping is no longer needed, you can go ahead and FOCUS your full attention on the task at hand.
The biggest shortcoming of automatic trimmers is the spool replacement. If your line ran out, it is necessary to change the entire spool to add the new line. Thus, the need to replace every time can end up being expensive. This is contrary to bump trimmers where simple rewinding and reuse of the spool is possible.
There is another concern in relation to its maintenance. The technology used in the automatic feed system is more complex than bump trimmers. So, you can expect as well that it would be more complicated to troubleshoot.
Fixed Line System
Fixed line systems are being made with simplicity in mind. This trimmer head requires the loading and threading of lines in individual lengths. As a result, it eliminates the hassle of winding the entire spool of string.
over, fixed line trimmer heads use strings that are thicker and more durable. Plus, the increase in diameter line lessens the wear and tear. As a result, this allows users to operate longer and farther.
The sturdiness and convenience of this system make it favorable for commercial use.
How to Choose the Right Weed Eater Heads
Knowing that weed eater heads come in different types, you might be wondering now which one is best for you. Here are some factors you might want to look into first to help you better decide.
Type.
Not all weed eater heads are being created with the same level of efficiency. Although all types can perform the intended tasks, their mechanisms are very different.
For example, if you find constant bumping bothersome, then an automatic head might be good for you. But, if you rather prefer a low maintenance trimmer, then the automatic feed system may not be the best. Choose between the bump feed or the fixed line system instead.
You see, each type has its own pros and cons. So, it is wise to weigh things first. Your purpose must stand as the basis in deciding which trimmer head is right for you.
Compatibility.
One thing to look for is the compatibility of your weed eater heads with your intended purpose. As simple as checking the specifications and features will tell you if this is right for your needs.
For instance, a high-end trimmer head may tend to be over the top if you only mean to use it for basic garden trimming. In this case, it is more practical to use a cheaper low-end version of weed eater heads. Anyway, it can still perform the same task without the need to spend extra bucks.
Size.
The size of your weed eater head depends on the size of the area you intend to work with. The larger the lawn, the bigger the diameter of your trimmer head should be.
Smaller trimmer heads may seem more affordable. But choosing this will also take a longer period of time for you to finish the groundwork. Thus, making it rather inefficient to use over a massive lawn.
Power.
Electric grass trimmers are popular for their eco-friendliness. But, power-wise, they are less stronger than the gas-powered versions. It is not a bad thing though if what you intend is to use it for light trimmings only.
But, if you mean to use the trimmer for more heavy-duty tasks, then go for the gas-powered type instead. This will give you much better power and durability to perform your grass cutting needs.
Cost.
Of course, let us not forget about the budget.
As always, quality comes with a price. But, you have to remember as well that quality is equal to efficiency. What good is a cheap trimmer head if it breaks halfway down your task? Or, if it is not even cutting the grasses at all?
Depending on the type, the price range of trimmer heads vary. To be clear, you do not need to buy the most expensive one. Rather, look for trimmers heads from reliable brands. It is also good to do some research and read reviews from consumers. This will help you come up with better judgment.
Everybody wants a well-manicured lawn. But it can be quite a work without the right equipment. Thus, nothing makes grass trimming far easier and convenient than using string trimmers. Although you also need the right weed eater head to go along with.
I hope the details we presented above will help you find the right string trimmers and heads. Together, both machine and accessory will keep the weeds and groundcovers in your lawn at bay.
How to Change the String on an Echo Trimmer Bump Head
How to Change the String on One of These
Changing the string is a necessary evil in having a trimmer. When the string runs out, you need to change it, and this process can be intimidating for the lawn care novice. Certainly, you could look into purchasing a speed feed head, but there are advantages to opting for a bump head trimmer. For one, they are less expensive, but another benefit is that they are generally easier to disassemble. In this post, we review exactly what you need to do to change the string on a bump head trimmer.
Remove the head
To remove the head of the trimmer, grab the outside of the bump head, turning it clockwise until it clicks. After this is completed, make sure to clean out the inside, removing any debris that may be clogging up the head. Changing the string requires some fine motor skills, so you need a clean head to successfully accomplish this task.
Inserting the string
Once you’ve removed the head, you can insert the string. With a bump head stringer, you will generally need about 15 feet of string. First, locate the holes through which you will insert the string. Then, insert the strings into the holes. Some times it is easier if you bent the very end of the strings. Wined the strings in the direction of the arrows on the spool, and lock into the cut outs on the spool so the strings do not come unwound.
Reattaching the head
To reattach the head, insert both ends of string through the holes of the trimmer. This is a bit of a delicate procedure, as you need to watch out so that the strings do not fly apart. When you have the head lodged in place, pull on the strings. This acts as a clamp and will hold the head into place.
Changing the string on a trimmer bump head requires a decent amount of finesse, but following the instructions above should allow you to manage the task with minimal difficulty.
Note: for a visual demonstration of how to change the string on a bump head trimmer, check out the video demonstration at the LawnEQ YouTube page.
String trimmer bump feed troubleshooting
String trimmer bump feed troubleshooting. No matter how expensive your trimmer is, it can sometimes cause issues and not advance correctly. Are you a worker at landscaping and frequently face problems with trimmer feeding?
How many times you’ve been interrupted in your work, and then you have to move the string manually? This issue is prevalent among the users of a string trimmer that desires a reliable string supply.
There can be many reasons why your string trimmer is poking in between your operation. If you are also facing trimmer feed failure, you are at the right spot; this guide of ours will show you the best possible string trimmer bump feed troubleshooting.
Read all of them carefully and apply them in your case; one of them will work magic for you, letting you get rid of the problem as soon as possible.
When identifying the problem and diagnosing the cause, it is essential to check the cap, spool, lever, trimmer head, and springs.
String trimmer Bump feed Troubleshooting
Following is a general guide on how to repair your trimmer feeding problems.
Some trimmers include an automatic thread spool that is controlled by a lever. This lever, located in the trimmer head, uses centrifugal force to pull out additional wire as the wire wears and locks in bolts while waiting for the wire to be released.
It is best to replace the handle if it becomes clogged with dirt or is worn and does not come loose from the bolts on its own. Remove the trimmer head and then the spool to replace this lever.
Remove the handle by inserting a small screwdriver under the bottom of it.
By pressing it, you can insert a new lever. Replace the lid and spool.
String trimmer Broken Cap
When you tap on the ground with the cap, you can cross more lines. Because it is in regular contact with the ground, if this cap breaks or wears badly over time, it can become faulty and prohibit the bar from going forward.
Something could obstruct the lid, preventing the line from continuing.
Simply remove any dirt that may interfere with the operation to inspect and replace the housing. Replace the cap if it is damaged.
Damaged Trimmer Head
The spool, lid, and spring are all housed in the trimmer head (and a lever on some models). Even after years of overuse, if the trimmer head is significantly damaged, the parts may fail, forcing you to replace the trimmer head.
Trimmer heads also become clogged over time and require thorough inside cleaning, revealing symptoms of wear.
Insert a small screwdriver or Allen key into the hole on the gearbox slightly above the trimmer head to remove it.
Turn the screwdriver until it clicks into position on the trimmer head.
When the screwdriver clicks into the hole on some models, you may need to lock it against the washer.
Incorrect loading of the line
Some trimmer heads take two distinct thread lengths, each secured in its hole in the thread spool.
Winding the two strings frequently necessitates holding them together and incorporating them simultaneously to avoid one line crossing itself or the other.
String Trimmer Head | How to install new trimmer line on a traditional bump head
At such a juncture, the railway comes to a halt. Wrap the line on the spool in the direction of the arrow, whether your trimmer requires one- or two-line lengths.
When a string is wound in the opposite direction, it does not advance.
Malfunctioning of the Springs
Under pressure, the spring retains the lid on the punch head and returns it to its original position after hitting, allowing the string to go ahead.
The spring may fail if it becomes entangled with foreign things in the house. Remove and inspect the impact cap to verify the spring’s condition and clean the housing.
Remove any debris from the housing and make that the spring and cover are in good working order. If necessary, replace the parts. Replace the spring as well as the impact cap.
Why does my trimmer line run out so fast?
If the lid becomes damaged or worn over time, it may fail, allowing too much rope to fall out when poked.
Depending on the severity of the damage, it can be hung up during the return movement, allowing the line to be constantly progressed.
Simply remove the bumper cover and replace it with a new one to replace it.
Conclusion
If you own an ego trimmer, you can find ego string trimmer bump feed troubleshoot on the internet, or you can follow ours too. If your trimmer line is older than five years, we recommend you replace it as it can now cause problems very frequently.
Loading the line plays a vital role in the bump feed issue as too thick can be stuck, and too thin can overheat when cut.
Weed Eater String: 3 Common Problems How To Solve Each
If you are ready to throw your weed eater in frustration (or maybe you already have?! ) we honestly hope this solves the problems you are having with your weed eater string quickly and for good !
Let’s get right to the list of common weed eater string issues.
Please feel free to skip ahead to the section covering the problem you are experiencing.
Common Weed Eater String Problems
Here’s our list of the most common issues you may experience with your trimmer string while using your weed eater or string trimmer.
We also have a couple of bonus tips if you are experiencing other issues with your trimmer string at the end!
Are you having trouble ‘re-stringing your trimmer head?’ If so, read our article that covers the 3 steps to re-string your weed eater.
How to stop trimmer string from constantly going back into the trimmer head
If you are experiencing the trimmer string continuing to want to go back inside the trimmer head as you are trying to finish weed eating, we have an easy fix for you.
You simply need to ‘bump’ your trimmer string out more often. Your string trimmer should dispense more trimmer string if the trimmer head is gently tapped on the ground. If you can depress the ‘bump head’ located at the bottom of your ‘trimmer head,’ this is how your weed eater is designed to work.
Almost all somewhat new string trimmers will have this functionality. If your string trimmer is older and does not, we strongly encourage you to make your life so much easier and upgrade your string trimmer, or look into aftermarket bump heads that may fit your existing string trimmer.
If the string outside of the trimmer head gets too short, it will always return back into the trimmer head. The solution is to make sure you don’t let your trimmer string get too short.
We don’t sell string trimmers, but we do sell trimmer string and after market bump heads that may be compatible with your existing string trimmer.
What to do if your trimmer string keeps getting stuck together inside the trimmer head
Another common issue you may experience with your trimmer string is that it can melt to itself inside the trimmer head. Once the string has melted to the coiled up string next to it inside your trimmer head, it is no longer able to ‘bump out’ when you tap your trimmer head.
We are using the term ‘melt’ because this is exactly what is happening. The trimmer string is getting too hot causing it to melt.
We have 2 suggestions to solve this common problem with trimmer string.
First try bumping your string out more often. That would be great if this does solve this specific issue for you.
If it doesn’t, we can almost guarantee you have some super cheap trimmer string inside your trimmer head. There is not a big difference in price between ‘cheap and expensive’ trimmer string, but there is a big difference in quality!
We only sell high-quality trimmer string and have the lowest price on the internet for several of the most popular types. With lots of trimmer string styles, sizes, and amounts available, we have the perfect string for any string trimmer.
How to stop your trimmer string from getting too short too fast
If you are bumping your string out often enough and that is not the reason your trimmer string is getting too short too fast, you may have it strung incorrectly causing this issue. Please read our related article on how to properly string your string trimmer.
If you are sure you have the trimmer string properly inserted inside your trimmer head and the string still gets too short too fast, you really need a thicker diameter trimmer string. than likely, the trimmer string you are currently using is not ‘heavy duty’ enough to handle the trimming you are trying to accomplish with it.
We carry trimmer line with diameters from as small as.065 to.155 inches. Depending on your string trimmer, you can only go up to a certain diameter trimmer string. Most have a range of trimmer string diameters they are compatible with. We recommend Googling your weed eaters make and model to find out what size trimmer line your weed eater is compatible with.
FYI, most lawn mowing companies are running.095″ or.105″ trimmer line in their string trimmers. Homeowner grade electric or battery powered string trimmers probably came with cheap.065″ line inside them and may only be able to handle up to.080″ trimmer line130″ and.155″ trimmer line are typically used by commercial companies with powerful gas-powered weed eaters and most often they only use these string trimmers and large diameter trimmer line with weed eating long fence lines or retention ponds for example.
Weed Eater String Troubleshooting Bonus Tips
We have a couple other things we will quickly cover in case nothing we already covered has solved your weed eater string problem!
What to do if your weed eater string is not coming out
If you know you have more string inside your trimmer head and bumping your trimmer head is not dispensing more trimmer string, we have a couple of tips in this scenario.
First, make sure you do have string inside the trimmer head, and that it is not melted together and/or twisted around the spool in a manner that stops more from being dispensed.
Next, ensure you have wound the trimmer string in the proper manner and direction that your specific trimmer head calls for. Google your weed eaters make and model to learn how to properly string your trimmer head or read our general guide applicable to most string trimmers on how to restring a trimmer head.
If none of these tips work, we think that you may worn too much material off the ‘bump head’ itself. Once the part of the bump head that makes contact with the ground wears to a certain extend, it becomes ineffective! You may simply need to purchase a new bump head for your string trimmer.
How often/when should I bump out more trimmer string?
How often you should bump out more trimmer string depends on a number of factors. But, in general you want your trimmer string to be 80%-100% of it’s ideal length per the string cutter found on your weed eater’s protective guard.
You will notice a decline in performance once the string is less than 80% of this length, which is typically 6″-8″ by the way. The ‘ideal length’ all depends on your specific string trimmer model.
Change / Replace String Trimmer / Weed Whacker Bump Head | ECHO SRM in 4K
Professional lawn mowers can ‘listen’ to the noise created by their trimmer string rotating and know when more string needs to bumped out by the sound alone. Pay attention to the sound the next time you are string trimming and you may find this to be a very valuable tip!
What to do if my trimmer string is too long?
If your trimmer string is too long, cut it! We recommend using a trimmer line cutter to cut trimmer string and not a knife! Using a knife is very dangerous, scissors or snips of some sort would be much better than a knife of any type but often they struggle to cleanly cut trimmer line. If you don’t get a clean cut you will probably experience the final tip noted below!
This tip may seam like common sense but we included it because if you string up your trimmer and have too much trimmer line after inserting new string, your string cutter from on your trimmer guard will probably be rendered useless!
I can’t get my trimmer string to fit in the starting position inside the trimmer head
If you simply can’t get your trimmer line to poke into the hole inside the trimmer head which is supposed to keep it in place while you wind up the rest of the spool, you either need a cleaner cut on that end you are trying to insert or you are trying to use a diameter of trimmer string too thick for your string trimmer.
The solutions for this problem would be to ideally use a line cutter to quickly and safely get a clean cut on your trimmer line each and every time. If you are trying to insert a trimmer line too thick for your machine, you just need to buy a smaller diameter line.
Ryan Sciamanna
Ryan is the owner and founder of Lawn Crack, LLC the parent company of iGoPro Lawn Supply. He has worked in almost every capacity within the lawn and landscape industry for small local companies, nationwide companies, and of course, owning his own lawn landscape business which he sold in 2018 before starting selling lawn and garden products online. Learn more about Ryan by subscribing to the LawnCrack YouTube Channel.