How to choose a quarter in a plank with a circular saw

Methods for making a quarter

You can select a quarter using several methods using different tools. For instance:

  • electric plane,
  • milling cutter,
  • hand-held circular saw,
  • stationary circular saw.

choose, quarter, circular

The last method. choosing a quarter with a circular saw. is the most convenient and productive. And consider it.

If you need planed boards, then it is more convenient to stitch the boards first and only then proceed to making a quarter.

What does drying out lead to

A typical case: you made a shed in your country house for storing household equipment and for other needs. They did it for themselves, so they rallied the boards from which the walls are made, carefully, without the slightest crack. Two to three months pass; the boards dry up and the whole wall glows with cracks. In winter, snow blows through them, in summer the wind brings dust inside the barn.

Shrinkage reaches 10-13% of the linear size. That is, a board with a width of 100 mm after drying is reduced to 88 mm.

To prevent this from happening for wall cladding, you need to use boards with a quarter. A wall sheathed with such boards will never have through cracks. With their quarters, adjacent boards overlap each other and when the through cracks dry out, no more appears.

Unfortunately, lumber is very rarely sold with a quarter ready. Therefore, an amateur master should know the ways in which the boards are modified if necessary.

Alternative ways

As mentioned, the stationary circular saw is very handy for quarter selection. (There is a separate article on the types of circular saws and the features of their choice on our website.) But it is not always in the arsenal of the master, and sometimes it is impossible to use it purely physically.

If you need to select a quarter in thick, long boards, you can use a hand-held circular saw. The manufacturing principle and the sequence of operations are the same. The difference is that in this case the board to be processed and the tool are swapped. The board is fixed motionlessly, and the master moves the circular saw with a parallel stop manually.

If you have neither a circular nor a hand-held circular saw at hand, you can use a grinder with a disc for wood or a hand router with a suitable cylindrical cutter. Both methods are very slow and not suitable for a large amount of work. In addition, choosing a quarter with a grinder is inconvenient, dangerous and it turns out unevenly.

Another way is to use an electric plane. However, most modern models of planers, due to the design features, are not suitable for this. Watch the video, which shows just this way of choosing a quarter.

Quarter selection sequence

  • We adjust the overhang of the saw blade so that the cutting depth is equal to half the thickness of the processed board. The easiest way to do this is right on site. To do this, we attach the board to the saw blade from the side, as shown in the photo, and adjust the overhang of the blade.
  • We install a parallel stop on the machine so that the cut width is also equal to half the thickness of the board. We take into account the thickness of the disc itself. This completes the machine setup.
  • Making longitudinal cuts from opposite sides of the board.
  • We make cuts from the ends of the board. A quarter is ready. We get glazing bead as a by-product)).

How To Make A Straight Cut Using A Circular Saw

Cutting a quarter with a circular saw

Choosing a quarter in a wooden part is one of the most frequent operations in joinery and carpentry. Why this is done and how it is discussed further.

Wood, like any material, has specific properties that must be taken into account. This obvious fact, however, is often ignored by beginners. As a result, spoiled mood, time spent on rework, and often spoiled material.

One of the characteristic properties of wood is that when the humidity changes, the linear dimensions of the wooden part change. When dry, the wood shrinks, and expands with increasing moisture. In addition, resin evaporates from the wood over time. Because of this, the wooden part gradually decreases in linear dimensions, regardless of changes in humidity. They say about this phenomenon: the tree dries up. These effects are especially noticeable in softwood, from which the most common sawn timber is made.

In construction and dachas, spruce and pine boards are most often used. These woods change size the most when dry.

A Few Tips

  • Don’t forget about safety.
  • If the boards are long, work with an assistant.
  • Boards must be of the same thickness.
  • Do not use freshly cut sawn timber. Let them dry for at least 1 year.

In the next articles, we will continue the story about woodworking techniques and the tools used.

Cutting a quarter with a circular saw: how to make a cut, methods

Choosing a quarter in a wooden part is one of the most frequent operations in joinery and carpentry. Why this is done and how it is discussed further.

Wood, like any material, has specific properties that must be taken into account. This obvious fact, however, is often ignored by beginners. As a result, spoiled mood, time spent on rework, and often spoiled material.

One of the characteristic properties of wood is that when the humidity changes, the linear dimensions of the wooden part change. When dry, the wood shrinks, and expands with increasing moisture. In addition, resin evaporates from the wood over time. Because of this, the wooden part gradually decreases in linear dimensions, regardless of changes in humidity. They say about this phenomenon: the tree dries up. These effects are especially noticeable in softwood, from which the most common sawn timber is made.

In construction and dachas, spruce and pine boards are most often used. These woods change size the most when dry.

What does drying out lead to

A typical case: you made a shed in your country house for storing household equipment and for other needs. They did it for themselves, so they rallied the boards from which the walls are made, carefully, without the slightest crack. Two to three months pass; the boards dry up and the whole wall glows with cracks. In winter, snow blows through them, in summer the wind brings dust inside the barn.

Shrinkage reaches 10-13% of the linear size. That is, a board with a width of 100 mm after drying is reduced to 88 mm.

To prevent this from happening for wall cladding, you need to use boards with a quarter. A wall sheathed with such boards will never have through cracks. With their quarters, adjacent boards overlap each other and when the through cracks dry out, no more appears.

Unfortunately, lumber is very rarely sold with a quarter ready. Therefore, an amateur master should know the ways in which the boards are modified if necessary.

How to choose a quarter circular

Using a circular saw to make a quarter board will make the process much easier. A good quality tool with sharp circle blades and good power will help you a lot. After all, now you can set the necessary values ​​and not be afraid to cut off the excess.

How to choose a quarter in a circular board? The process does not differ much from the usual one, the only thing is that you now have a circular saw in your hands. From the end of the board, a cut is made with a depth of half the height of the board. Next, a second cut is made in the center of the end. Next, we take the necessary measurements and cut it so that a quarter takes on the required shape.

Electric planer. how to choose a quarter in the board

The electric plane is a handy tool for woodworking. With its help, you can evenly cut wood and get a product of the required shape. How to choose a quarter in a board with an electric plane? The process is no different from working with a circular saw. The only thing that can be an advantage of working with this particular tool is ease of use and a clearer vision when performing a task.

Such works will help you to independently make a quality product from a cheaper product, which is perfect for decorating and decorating a room, both inside and outside.

Methods for making a quarter

You can select a quarter using several methods using different tools. For instance:

  • electric plane,
  • milling cutter,
  • hand-held circular saw,
  • stationary circular saw.

The last method. choosing a quarter with a circular saw. is the most convenient and productive. And consider it.

If you need planed boards, then it is more convenient to stitch the boards first and only then proceed to making a quarter.

circular saw size

How to choose a quarter in a circular board

Quarter selection sequence

  • We adjust the overhang of the saw blade so that the cutting depth is equal to half the thickness of the processed board. The easiest way to do this is right in place. To do this, we attach the board to the saw blade from the side, as shown in the photo, and adjust the blade overhang.
  • We install a parallel stop on the machine so that the cut width is also equal to half the thickness of the board. We take into account the thickness of the disc itself. This completes the machine setup.
  • Making longitudinal cuts from opposite sides of the board.
  • We make cuts from the ends of the board. A quarter is ready. We get glazing bead as a by-product)).

How to choose a quarter circular

Using a circular saw to make a quarter board will make the process much easier. A good quality tool with sharp circle blades and good power will help you a lot. After all, now you can set the necessary values ​​and not be afraid to cut off the excess.

How to choose a quarter in a circular board? The process does not differ much from the usual one, the only thing is that you now have a circular saw in your hands. From the end of the board, a cut is made with a depth of half the height of the board. Next, a second cut is made in the center of the end. Next, we take the necessary measurements and cut it so that a quarter takes on the required shape.

Real Life Trick Shots 2 | Dude perfect

Trick shots should be an everyday thing! Thanks to Kay Jewelers for sponsoring this video! Win Valentine’s Day by going to http://dudeperfect.com/KayJewelers.

Electric planer. how to choose a quarter in the board

The electric plane is a handy tool for woodworking. With its help, you can evenly cut wood and get a product of the required shape. How to choose a quarter in a board with an electric plane? The process is no different from working with a circular saw. The only thing that can be an advantage of working with this particular tool is ease of use and a clearer vision when performing a task.

Such works will help you to independently make a quality product from a cheaper product, which is perfect for decorating and decorating a room, both inside and outside.

Maroon 5. Girls Like You ft. Cardi B

\ “Girls Like You” is out now. http://smarturl.it/GLY For more, visit: https: //www.com/maroon5 https: //.com/maroon5.

How to choose a quarter on the board

By spending a little more time, you can significantly reduce your material costs. That is, the volume of work will increase, but the benefits will also be noticeable. It is absolutely not necessary to buy grade 1 material. by choosing grade 2 wood, it is easy to independently give it the desired look in a fairly short time.

How to choose a quarter on the board. How to choose a quarter in a circular board

What does drying out lead to

A typical case: you made a shed in your country house for storing household equipment and for other needs. They did it for themselves, so they rallied the boards from which the walls are made, carefully, without the slightest crack. Two to three months pass; the boards dry up and the whole wall glows with cracks. In winter, snow blows through them, in summer the wind brings dust inside the barn.

Shrinkage reaches 10-13% of the linear size. That is, a board with a width of 100 mm after drying is reduced to 88 mm.

To prevent this from happening for wall cladding, you need to use boards with a quarter. A wall sheathed with such boards will never have through cracks. With their quarters, adjacent boards overlap each other and when the through cracks dry out, no more appears.

Unfortunately, lumber is very rarely sold with a quarter ready. Therefore, an amateur master should know the ways in which the boards are modified if necessary.

Methods for making a quarter

  • electric plane,
  • milling cutter,
  • hand-held circular saw,
  • stationary circular saw.

The last method. choosing a quarter with a circular saw. is the most convenient and productive. And consider it.

If you need planed boards, then it is more convenient to stitch the boards first and only then proceed to making a quarter.