How to configure a trimmer for grass for mowing grass. The purpose of the trimmer head (coils…

Proper operation of a trimmer for grass for grass

In every summer village, village, suburb and in the city itself you can see these devices: they work tirelessly, aligning the lawn grass, cleansing the space of squares and parks, gardens and gardens from thickets of burdock, wormwood and weeds. The noise and crackle from the trimmers are heard from the beginning of summer to autumn, until the growth of the grass is so much so that it will no longer need to trim it. Automatic braid for grass deserved its popularity for the simplicity of the device and operation. It is easy for her to use, it is easy to care for, and in case of breakdown it is not possible to easily fix it without difficulty. The article will just tell you how to use a trimmer for grass correctly.

As with any other technique, in working with the trimmer there are rules. First you need to make sure that the main nodes and assemblies: screw, rods, handles and motor. If the device has not yet been assembled, then it should be correctly assembled according to the instructions.

Gasoline unit

In the case of a gasoline trimmer, it is necessary to check the gearbox for lubrication. Also, do not forget to add lubricants to the fuel tank, if the instruction manual is evidenced. As a rule, gas and oil are mixed in a ratio of 45 to 1, but these indicators may vary depending on the model and manufacturer, so you should carefully study all the technical requirements for the device. The fuel container must be filled on the very neck. If all technical fluids are flooded, then you can try to start the device. But it’s not worth mowing right away, it will be better to let the trimmer work without load so that the engine works to the flooded fuel. A few minutes will be enough, after which you can give the motorcycle full load.

Elektokos

With an electric trimmer, everything is much easier. Having made sure that the gearbox has the required amount of lithol, you can start work. No additional measures are required. Unless it is necessary to make sure that the carrying does not run on the path of mowing in order to avoid possible damage.

When the device itself is ready to work, you should make sure that there is nothing around that could interfere with the work. If possible, the estimated mowing area should be cleaned of snags, glass, stones and other solid objects that can damage a knife or fishing line for a trimmer.

It is better if other people do not approach the trimmer while working. Usually the recommended distance is at least 10-15 meters in order to avoid small debris (mulch) in the eye and on the face.

Depending on the upcoming work, you need to choose a nozzle for a trimmer for the grass: a screw-knife for weeds and hay, a fishing line for a trimmer for lawn grass or a disk saw for shrubs. Mowing should be in the opposite direction from people, if possible, moving away from buildings and buildings. You should not get too close to the fence and other designs, since the fishing line for a trimmer can catch on sharp edges, and the screw-knife will bend if it accidentally offends it a hard object.

The preparation of the device itself will not take much time, all modern models of devices are designed to facilitate and simplify their operation, starting to work in the shortest possible time.

We run up a gasoline trimmer for grass

Most often, the running.in is used in a motorcycle (trimmer for gasoline grass). The running.in is the operation of the engine at low speeds, without loads. To run, it is necessary to start a motorcycle and let it work at idle. It is best to produce the first mowing with a fishing line, since when mowing lawn grass is a less high load on the engine than when working with hay or shrubs.

The load must be increased gradually, in stages increasing engine speed. If you start operating with high speeds, the engine can be poorly developed, which will affect the entire further operation of motorcycles.

Do not produce the entire temporary resource during the first engine start. It will be best after working at idle by idle for 10-15 minutes to mow, then drown out the device and let it cool a little. Use a motorcycle system carefully, without sudden movements, in order to avoid collisions with solid objects (stones). The stab on the stone can poorly affect the work of the unfortunate nodes. In some cases, backlash, noise and hum during operation appear. This can be easily avoided if the trimmer for the grass is correctly running.

Gasoline braid device device

The weight of the entire device is about 8 kg, which is quite difficult to hold on the hands. Therefore, the unloading belt-rug belt with a protective pad and regulators is included with the scope of the scythe.

The grass braid is designed for mowing grass and small shrub in personal plots.

As you know, grass can be mowed in different ways. folding it in rolls or simply rolling it out. In addition, the grass is different. soft or rough, with thick stems, shrub.

Choose a suitable nozzle

In addition to its product, the manufacturer usually provides several mills (usually 3).

To work with soft grass as a cutting element, a fishing line for a trimmer is used, wound on a drum. Speed ​​of 9,000 revolutions per minute allows you to quickly process even a large lawn.

For more rough grass and thickets, one of the metal knives can be used, which differ among themselves by the number of cutting teeth.

For mowing thick shoots, reeds, young shrubs, a disk with 40 or 80 teeth is designed. Corn, dry weeds with thick stems, you can mow three- and four-lobed milling.

And in order to put beveled grass in the rolls, a knife with 8 blades is used and a special crest is attached to the braid itself.

And now more about how to install a cutter. The place of fastening of the cutter is called a gearbox. On it, first you need to fix the figure washer using a hexagonal key.

Then put on a knife, combining the holes in it with a protrusion of the puck. After that, you need to install the upper figure washer on the shaft and tighten everything with a nut.

Here you should pay attention to the fact that the thread on the shaft is left, so you need to tighten the nut (like screwing the mowing head) counterclockwise.

To squeeze the nut to the stop will help the key, which is also in the delivery kit. You can replace the cutter by doing all the operations in the reverse order.

How to fix a disk or a fishing line for a trimmer on a trimmer

The cutting mill is attached to the executive organ. The mounting location is called a gearbox. It is not difficult to cope with the task of installing a disk or coil. The principle of consolidating cutting discs on the trimmer is as follows:

• The figured washer is originally fixed by using a hexagonal key
• On the shaft set the disk
• Then install the upper washer, and then tighten it by means of the fastener
• It is necessary to rotate the nut through a special end key, which is usually equipped with each tool
• The rotation of the nut is carried out in the direction counterclockwise
• When rotating, it is necessary to jam the shaft with a hexagonal key

In the opposite sequence, the disk on the trimmer is removed and replaced. details on how to install a coil with a fishing line on a lawn mower is described in this material.

Gasoline gas mowing gasoline with butter

Before mowing grass with a benzo.leggos, it is necessary to season the tool with fuel. As fuel, gasoline with butter is used. However, take into account that mixing gasoline with oil is needed only for two.stroke engines. Four.stroke engines operate on pure gasoline, since their design has a separate container. oil crankcase. There are no 2-stroke gas crankcases in the design of the 2-stroke gasolimers, so you need to pour exclusively gasoline with oil into the tank.

As gasoline, it is recommended to use AI-92 brand fuel. In order not to make a mistake in choosing, you need to read the instructions offered by the manufacturer. Often, most manufacturers recommend using the AI-92 brand fuel, and only some recommend filling AI-95.

Gasoline must be diluted with a small one in a proportion of 1 to 25. This means that 40 ml of two.stroke oil must be added per 1 liter of gasoline. However, not everything is so unambiguous here. The proportion 1 to 25 is universal, but each tool model has its own values. These values ​​are also indicated by the manufacturer in the instructions. details about how to properly dilute gasoline with butter into a lawn mower is described here. After breeding gasoline with butter, pour a full tank, and start work.

It is interesting! If a four.stroke lawn mower is refuel, then pure gasoline must be poured into the tank, and engine oil is added to the oil container to the maximum level.

Gasoline gas mowing gasoline with butter

Before mowing grass with a benzo.leggos, it is necessary to season the tool with fuel. As fuel, gasoline with butter is used. However, take into account that mixing gasoline with oil is needed only for two.stroke engines. Four.stroke engines operate on pure gasoline, since their design has a separate container. oil crankcase. There are no 2-stroke gas crankcases in the design of the 2-stroke gasolimers, so you need to pour exclusively gasoline with oil into the tank.

As gasoline, it is recommended to use AI-92 brand fuel. In order not to make a mistake in choosing, you need to read the instructions offered by the manufacturer. Often, most manufacturers recommend using the AI-92 brand fuel, and only some recommend filling AI-95.

Gasoline must be diluted with a small one in a proportion of 1 to 25. This means that 40 ml of two.stroke oil must be added per 1 liter of gasoline. However, not everything is so unambiguous here. The proportion 1 to 25 is universal, but each tool model has its own values. These values ​​are also indicated by the manufacturer in the instructions. details about how to properly dilute gasoline with butter into a lawn mower is described here. After breeding gasoline with butter, pour a full tank, and start work.

It is interesting!If a four.stroke lawn mower is refuel, then pure gasoline must be poured into the tank, and engine oil is added to the oil container to the maximum level.

How to put on and hold it correctly?

The quality of your work also depends on what technique you use. For the right technique, you need to be able to hold the unit, and for convenience to wear it correctly. The fact is that not all trimmers for grass are equipped with a shoulder belt. If he is, then it needs to be worn so that you are comfortable. There are models of devices whose belt can be inconvenient, so try to put on a trimmer for grass as convenient as possible how it will succeed.

During long work, it also happens that pain in the back and muscles arise, so the most convenient tool can reduce the number of such troubles as conveniently as possible.

Another function is to adjust this belt. On better models, its convenience assigned a special role and made special positions that will allow the manager of a scythe not to experience inconvenience. You can adjust the belt in height, choosing the necessary for yourself.

Now let’s talk about how to hold the unit correctly. Various types of trimmers have different handles. For someone it is made in the form of a bicycle steering wheel (which ensures the distribution of the load on both hands). On some units you can see the handle of the letter D. The bicycle option must be held with two hands, and tight.

Despite the presence of rubberized handles, it is better to rely on yourself and not hope that they will not slip. Keep the handle in the shape of the letter D with one hand, and with the palm of the palm to provide a large capture area. This will give you full control over the handle, which will positively affect control.

How to mow grass with a trimmer with a metal knife

As the border of the mowing area moves, move the fuel and the bag.

If the grass was setting down: you need to hand the steering wheel forward and mow to the left with an inclination by the handles to the left (sector ~ 11 hours) and the right with the tilt for the handles to the right (sector ~ 1 hour), and do not rush!, to mow the grass cleanly and so as not to “dig” the earth.

During the mowing of grass (and turns), do not forget to look around!:

• To notice the gesticulation of others, drown out the motor and remove the headphones,
• So that closer than 15 m children, animals, spectators and assistants do not come up, t.to. When a metal knife in the grass collided with a motionless object, a trimmer for grass or a lawn mower (motorcycle) can be strongly thrown to the side or expanded back, and a trimmer for the grass rotates at a speed of up to 10,500 rpm. And he is able to cut off his hand or leg.Also, when the grass is mocking the trimmer from under the knife, various objects (crushed stone, glass, garbage) can fly out and ricochet).

How to mow grass with a trimmer (more about the mowing technique)

The engine revolutions when the trimmer mowed depending on the load on the engine. the thicker the grass and, of course, is heavier than the engine, the bolder you need to open the “hole” (throttle in the diffusor of the carburetor).

Work speed of the engine during the mowing of grass with a trimmer try to keep constant (slightly higher than medium). or less gas. only depending on the overall load on the engine. No need to completely discard gas (and immediately acceleration again) with each wave of braids for grass. And the clutch is not for long, and the edges on the drive shaft can “overtake”, and the overall wear of the trimmer for grass (motorcycles) increases sharply.

Before mowing grass, we find out the parameters of the site

(to know which knives to take, how much fuel and time are needed)

• Grass density;
• The hardness of the grass;
• the splendor of the grass;
• wovenness of grass;
• (The height and thickness of the grass are not important)
• the boundaries of the site;
• what irregularities (how to come in);
• the presence of hidden obstacles (remember)
• that not cut (bushes, flowers, seedlings).

To mow grass in the summer is a disaster, and not just homework how to use a trimmer. If your yard or site is strongly overgrown with grass, you can scare you, but this part of the article will help to figure out how to mow grass with a trimmer easier and less irritating.

How to use a trimmer

Tips on how to mow grass

• Mowing grass when it is not very large. This will allow you to cope with work much easier and faster than if you mow a strongly overgrown lawn or yard. A large mass of grass, weeds, plants and trimmer will be hard to grind. In addition, a lot of chopped grass will lie on the surface, which must either be cleaned, or wait until it dries, or while it becomes compost, which is not very beautiful and can cause various diseases of the grass.
• Avoid mowing not grass, but fences, stones, bricks, any other hard objects, as this will greatly accelerate the wear of the fishing line and it will require its more common replacement.
• Some will have to wear an orthopedic corset (although it may seem stupid). Back support allows you to maintain performance longer and feel more comfortable.

Warning how to use a trimmer

Trimmer for grass, like a twin.franc grinder, chainsaw or garden tractor is unreasonable for what it is not intended for.

Keep a trimmer for the grass away from yourself so as not to cut off your fingers or leg.

Do not mow a trimmer in water or wet grass. If you have an electric trimmer for grass, you may hit an electric shock. If you have a gasoline trimmer for grass, you can pollute water and grass with fuel and exhaust gases.

You will need things to mow grass

• Pants. Preferably strong working jeans without holes. You can mow grass somewhere, so if your legs are not protected, soon you will feel how several thousand ants crawl along your legs and bite you. Sometimes a weed can scratch to the blood or stuck strongly, thrown back on the mower.
• Gloves. wandering, leather, it does not matter. If you mowed grass without gloves, then by the end of the kota you will not be able to move even a little finger without pain. The weight of the grass through a trimmer for the grass presses in the hands and abrasions and scuffs will appear on their hands if they were not in protecting gloves.
• Protective glasses. you cannot mow grass with your eyes closed, because small pieces of grass fly in the face. One good hitting your eyes will convince you that protective glasses are mandatory. This applies to one of the main rules how to use a trimmer.
• Have a sufficient amount of drinking water at hand. Even if you think it will not be hot, think again. You need to mow grass with a vibrating trimmer for a long time.
• Have a spare fishing line for a trimmer or a seasoned trimmer head to replace if it ends.
• If you have an electric trimmer for grass, you must have an additional extension cord. If you have a gasoline trimmer for grass, you must have a supply of fuel.
• Rake to rake mowed grass or weeds.
• Headdress if you work in the sun.
• High boots (pants are best tucked into boots).
• If you plan to work at dusk or later, make sure that you have a spray from insects and a lantern.

How to mow grass with a trimmer with a metal knife

As the border of the mowing area moves, move the fuel and the bag.

If the grass was setting down: you need to hand the steering wheel forward and mow to the left with an inclination by the handles to the left (sector ~ 11 hours) and the right with the tilt for the handles to the right (sector ~ 1 hour), and do not rush!, to mow the grass cleanly and so as not to “dig” the earth.

During the mowing of grass (and turns), do not forget to look around!:

• To notice the gesticulation of others, drown out the motor and remove the headphones,
• So that closer than 15 m children, animals, spectators and assistants do not come up, t.to. When a metal knife in the grass collided with a motionless object, a trimmer for grass or a lawn mower (motorcycle) can be strongly thrown to the side or expanded back, and a trimmer for the grass rotates at a speed of up to 10,500 rpm. And he is able to cut off his hand or leg. Also, when the grass is mocking the trimmer from under the knife, various objects (crushed stone, glass, garbage) can fly out and ricochet).

How to mow grass with a trimmer (more about the mowing technique)

The engine revolutions when the trimmer mowed depending on the load on the engine. the thicker the grass and, of course, is heavier than the engine, the bolder you need to open the “hole” (throttle in the diffusor of the carburetor).

Work speed of the engine during the mowing of grass with a trimmer try to keep constant (slightly higher than medium). or less gas. only depending on the overall load on the engine. No need to completely discard gas (and immediately acceleration again) with each wave of braids for grass. And the clutch is not for long, and the edges on the drive shaft can “overtake”, and the overall wear of the trimmer for grass (motorcycles) increases sharply.

Before mowing grass, we find out the parameters of the site

(to know which knives to take, how much fuel and time are needed)

• Grass density;
• The hardness of the grass;
• the splendor of the grass;
• wovenness of grass;
• (The height and thickness of the grass are not important)
• the boundaries of the site;
• what irregularities (how to come in);
• the presence of hidden obstacles (remember)
• that not cut (bushes, flowers, seedlings).

To mow grass in the summer is a disaster, and not just homework how to use a trimmer. If your yard or site is strongly overgrown with grass, you can scare you, but this part of the article will help to figure out how to mow grass with a trimmer easier and less irritating.

Preparation of the electrimmer

If it goes or just ends the rain, you can get a shock when cutting wet grass. Before the first turning on, make sure that you have assembled the device correctly. some models are delivered disassembled. The exact assembly will protect you from injuries, and the unit itself. from failures and sudden breakdowns. Instructions for the assembly of a trimmer for grass are described in the user guide.

When using the electrimmer, charge the battery (if the device provides for autonomous operation). Lubricate a mechanical gearbox using lithol or solidol. If the battery is not in the device diagram. connect the fork to the outlet and join in the work.

Basic rules for cutting the lawn

Owners of neglected lawns are interested in whether to mow high grass with a lawn mower correctly. Judging by the reviews, a high.quality gasoline wheel unit with a spacious bunker for collecting beveled greens can cope with such a task in several visits. But the work is unpleasant: heavy noise and harmful emissions.

The trimmer mow the lawn in a neglected state significantly faster, but after the completion of this work, you need to collect mowed greens with a rake.

Hence the conclusion: owners of lawn mowers should not allow high growth of grass.

The question is also often raised whether it is possible to mow wet grass with a gasoline lawn. The rules say: it is not recommended to work with a lawn mower in the rain or after watering, since such mowing is not distinguished by quality, and there is a risk of receiving ugly stripes

In addition, there are other rules that must be observed when cutting the lawn.

• Sultry summer day is not the best time to mow grass. Fresh sections quickly dry out, and their yellowness spoils the appearance of the lawn.
• It is recommended to cut the lawn cut in the morning or evening in dry weather, a day after rain or watering, when the soil and grass dry out.
• It is necessary to ensure that the lamp of the lawn mower is sharpened. Work with stupid knives is fraught with troubles in the form of foliage jamming and tearing grass with the root.
• Before the start of mowing, it is necessary to collect fallen foliage, branches of trees and other garbage, to level the earthen mounds that formed as a result of the vital activity of rainworms, ants and other insects.
• You should decide on the direction of the haircut so that it is at an angle to the previous. Otherwise, the appearance of the lawn will be associated with the washing board.
• When cutting, it is necessary to observe the parallelism and do not leave the narrow stripes, paying attention to the grass under the wheels.

Mulching function in a lawn mower

Different ways of improving soil fertility are used to care for the beds and lawns. Mulching is a necessary event for recovery of lawns, as well as prevent soil erosion. As a mulch, mowed grass has proven itself well. It is periodically recommended to mow grass and prepare compost from it, which is used in the winter as organic fertilizer of the lawn.

There are wheel units on sale, in which the mulching function is already built. With the help of this additional opportunity, during a haircut, the lawn mower is mulching grass and uncleaned fallen leaves: the process consists in grinding and accurate release of organics into the trimmed part of the lawn. The advantage of such models is obvious: the lawn is cleaned of plant debris, which in a redesigned form returns to the surface of the soil and enriches it. But the cost of a lawn mower with additional capabilities will be higher than the usual model.

Which is better: trimmer for grass or lawn mower

Each device for cutting grass has its advantages and disadvantages. Based on the needs, you should choose the one whose advantages will be large in this situation.

Advantages and disadvantages of a lawn trimmer for grass:

• Compactness. Compared to the lawn mower has a much smaller size.
• Mobility. trimmer for the grass is easy to use and can be used on small lawns.
• Is indispensable in hard.to.reach places.
• Can be used in areas with uneven relief.
• Does not require special care after work. It is enough to clean the device from the remnants of the grass and check the fishing line for the trimmer.
• Convenient during transportation.
• Pricing attractiveness. trimmer for grass is cheaper than a lawn mower.

• The device has small power.
• When cutting, the grass is scattered along the lawn. After work, it is necessary to collect mowed grass.
• Can pull out poorly rooted blades with roots.
• There is a ban on mowing wet grass.
• Work is accompanied by great noise.

Advantages and disadvantages of using the lawn mower:

• The quality of the haircut is even and neat, 30–40 cm wide.
• Does not pull the grass with the root.
• The operation of the device is practically celebrated.
• Equipped with a grass collector, so there is no need to collect mowed grass after work after work.
• The use of the device does not require special skills and large physical exertion.

• Suitable for work only on medium and large lawns.
• Used on a young lawn with not very high grass.
• Productive in even areas and on slopes of not more than 10 ° degrees.

It is better to buy a gasoline trimmer for the grass to care for a lawn at a summer cottage. It will allow a haircut of vegetation with different thickness of the stem. If the lawn is uniform in the country, then the purchase of an electric braid for grass with a capacity of 1 kW will be sufficient. Before acquisition, the conditions for storing the device and its transportation should be considered.

Did you know? The first invented garden trimmer for grass was designed to remove weeds around the trees. His uniqueness was that as a result of work, the trees bark was not damaged.

For sites with wild vegetation, it is better to use a metal knife as a cutting tool. It is necessary to select the device based on the work that it will regularly perform. Excess power significantly increases the weight of the trimmer for grass and fuel consumption. Disadvantage. leads to poorly performed work and even a breakdown of the tool.

Rules for haircuts

The lawn haircut is carried out in order to extend the growth, development of cereals and prevent their flowering, increase the root system of grass cover and increase the density of green mass. To achieve positive results, it is necessary to properly carry out the haircut process. This will increase the life of the lawn and its decorativeness. Periodic mowing also helps to fight weeds.

Did you know? The word lawn is of French origin. In England, lawns are widely used thanks to the right climate of regular rains and not harsh winter.

There are a number of rules that should be followed during the haircut:

• The most favorable time for haircuts is a warm evening the day after watering. Cut the lawn immediately after rain or watering is not recommended. Such actions can lead to the formation of furrows in the ground. Speasing on a hot day also negatively affects the lawn. Additional stress can negatively affect the growth of green mass.
• The haircut process should have a certain order. First, two opposite sides are mowed into one pass. Next, a phased haircut is carried out in the perpendicular direction, starting from the edge. To make the haircut uniform, you should capture a small part of the beveled strip at each passage.
• For the uniformity of the green carpet, the haircut direction should be changed at 90 ° with each next processing.
• than 30% of the plant’s height cannot be cut at a time. Too much cutting can lead to the death of plants.
• After the window, the lawn is watered and fed. This will help to quickly remove plants from a stressful situation.
• You can not leave the height of grass less than 3 cm. Such actions can destroy plants especially in the dry period.
• After the procedure, you should remove the grass using rake. Plant scraps can be thrown into a compost pile.
• The haircut should be carried out from May to the middle of October. In late autumn this procedure is dangerous. If the shoots do not have time to grow to frost, such plants may die.
• Devices should be sharp. Otherwise, the ends of the plants can become able to become able to become able to become wound and yellow.
• Regular haircut does not allow the grass to become stiff. The frequency of mowing depends on the growth rate and is at least 4-7 days.

How to adjust the fasteners on a motorcycle

Pay attention to where the hook is on the fasteners when you put it on. It should be 15 cm below the middle of the thigh and be located strictly horizontally. Suspension braids for grass are carried out between the engine and the handles. For balancing, use the bar and loop.

The height of the planting of braids for grass also depends on your task. If you need to shave the lawn at the height as close as possible to the ground. the working part should be lowered if it is necessary to cut off thick thickets. raise.

Take your shoulders and evaluate the position of the straps. They should not crash into the shoulders or television freely.

To correctly adjust the handle, try not to raise or put pressure on them. They are needed only to turn the tool to the left and right, and the bar would go freely, and the hilt did not hit the leg.

How to keep a motorcycle so that the back does not get tired

After balancing the tool, you can start mowing. If everything is done correctly, you greatly facilitate the load on your back. But it is also important to work correctly.

The working coil should be located parallel to the ground at the same height. No need to rush, you need to move very slowly, taking small steps. It is better to drive a barbell smoothly, without unnecessary swing.

If your spit for grass for one pass does not master high grass, mow the tops first, then under the root.

Do not worry about keeping speeds on the same level. Fuel will be saved if you drop the momentum during the reverse movement.

If you follow these simple recommendations, you will feel how the load on your back and hands will change. It will become much easier, and your performance will increase many times. And a few more simple recommendations. in this small video: