How to cut a neodymium magnet at home

What are neodymium magnets made of??

A neodymium magnet is an alloy of 3 elements: iron (Fe), boron (B) and neodymium (Nd), this combination gives a neodymium magnet a high magnetization force, relatively low weight and resistance to demagnetization.

What happens if you saw or drill a neodymium magnet?

You will spoil the magnet and be injured. The fact is that neodymium magnets are very fragile. External influences on the magnet outside the factory conditions lead to its demagnetization. Do not take these actions.

What if I need a magnet of a custom shape and size?

It’s that simple! Send to e-mail the following parameters of your future magnet:

size and shape (drawing or drawing)

magnetic field direction

magnet coating material (nickel, zinc)

other special requirements and wishes

What device is used to measure the magnetization and strength of a magnet?

The strength of permanent magnets is determined by a Teslamer or Gaussmeter. Using these devices, you can determine the magnetic induction of a neodymium magnet and determine the grade of the material (N35, N38, N40, etc.)

Can a neodymium magnet demagnetize?

Maybe, but only if the operating rules are not followed. Namely:

when the magnet heats up over 80 degrees Celsius

under the influence of radiation

when using a magnet in high humidity conditions

Do neodymium magnets lose their properties over time??

Our neodymium magnets retain their magnetization throughout their lifetime. This is the main difference between neodymium magnets and ferrite.

Neodymium magnets can lose their properties only if used improperly. heating over 80 degrees and breaking the integrity of the magnet.

How to properly store and use neodymium magnets?

Neodymium magnets must be used in dry rooms. The fact is that damage to the special protective coating can lead to corrosion and damage to the magnet. Therefore, it is necessary to take care of the protective layer of the magnet. It is undesirable to use the magnet outdoors, in damp rooms, unprotected from the effects of bad weather.


The use of wedges is justified if the magnets are small. But how to separate neodymium magnets, the adhesion force of which is 180 kg or more? You can use the handy “guillotine” from the desk, chest of drawers or door.

This method is based on the simple principle of cutting one of the magnets. The frame of the door, the frame of the chest of drawers or the table will lie as a supporting fixed part. Drawers, a door can be used as a sliding mechanism. It is worth considering that not all furniture and interior items are suitable for the tasks of separating magnets. only high-quality chipboard assemblies or wooden doors made of natural wood will withstand such loads.

neodymium, magnet, home

Using a wooden guillotine

You can also separate neodymium magnets in another way. Place one of the magnets in a suitable hole in the wall. The other magnet is pushed to the side with a long lever. this way you will be able to separate two strong magnets made of rare earth materials. This method is relevant for small products, but if you need to unfasten the search magnets, then this method will not work. it is not always possible to find a suitable hole in the walls.

How to disconnect neodymium magnets without a special tool at home?

Large neodymium magnets have tremendous adhesion to metal and do not demagnetize over time. What if two magnets are connected? How to Detach Neodymium Magnets at Home Using Common Household Tools?

Using wedges

To separate the magnets, only use wooden wedges, which are inserted between the two magnets. You may need to use a hammer or any other percussion instrument. Light blows drive a wedge between two neodymium magnets. As the wedge goes deep, the traction decreases. After a while, the magnets can be unhooked with your hands without getting injured.

Using your own efforts

A neodymium magnet with a capacity of 150 kg or more can be torn off from a metal or from another magnet without any adaptations. you only need your own strength. How to disconnect neodymium magnets at home or any other environment without tools is described below.

To solve the problem, it is necessary to install the magnets on a flat surface. this can be, for example, a table. It is important to place the parts so that the connecting line runs along the edge of the table or bedside table. You should pay attention to one point: one of the magnets should lie on the surface, and the second should hang from it.

To disconnect, hold the object lying on the table with one hand, and hold the hanging element firmly with the other. To break down, you will need to make every effort. The force vector is directed vertically. the force is directed perpendicular to the plane of the table or the surface on which the magnet lies. After it is possible to unstuck two connected elements, one of them must be set aside at least a meter from the other.

Here’s how to disconnect neodymium magnets using human capabilities. If the first time did not work out or there is not enough strength to break, then it is better to use one of the methods described above.

If the magnet sticks to a metal surface

Sometimes a powerful rare earth neodymium magnet sticks to various metal surfaces. This can be an entrance door, a sewer hatch, a car body. If this is a powerful search magnet, then you will have to make a lot of effort to disconnect it or use improvised devices. How to detach neodymium magnets at home or detach a magnet from a metal surface? The following method is proposed.

If the surface is flat and smooth enough, then the easiest option is to move the magnet to the edge of the metal sheet. If this method is not effective, then it will be safer and safer to use wooden wedges.

Neck, back

Belt with magnets

Neck jewelry made of active metals, medical collars, belts or corsets supporting the spine with magnetic elements are very popular among those who are worried about osteochondrosis, lordosis, joint diseases, bone problems, etc. The second category of people choosing a neck to wear a magnet is sick with broncho-pulmonary pathologies. Also, jewelry is worn on the neck for gynecological diseases, dermatitis of the upper half of the body and high blood pressure. Sometimes the magnet is simply hung on a long rope so that it hangs under the clothes to the solar plexus area or to the abdomen.

Sore spot pads

Manufacturers produce underwear with magnetic strips or plates sewn into it, which fit snugly exactly where it is needed. There are ready-made knee pads, elbow pads, corsets, panties, masks for solving a variety of tasks.


Magnetic rugs

Rugs are designed for those who want to be treated for insomnia, neuroses and other misfortunes, without getting up from the couch or from their workplace. There are special mats-disks in order to put on their decanter of water, which needs to be re-magnetised. It is believed that rugs can reduce geopathogenicity around them. A magnetic disk is used for taking a bath, the duration of which should be no more than 15 minutes. The bathroom helps with the primary symptoms of acute respiratory infections, since the magnetized water is a natural antiseptic. It can douche, gargle, apply to affected skin, drink.


The wrist is the active point on the human body. This view is shared by both Asian and Western medicine. For example, the Chinese judge the state of the wrist on the vitality of a person. It is also easy to fix the magnet here, for example, by putting it on as a bracelet. The proximity of blood vessels and the simplicity of magnetic therapy with a bracelet make this method of home treatment with magnets the most popular.

READ  How to Choose the Most Suitable Trimmer For Home And Cottage

Bracelet sellers estimate that about 14,000,000 bracelets with magnetic properties are sold annually in the world. This method of dealing with rheumatic or headaches, arthritis and motion sickness is used by retirees, athletes and even children. The magnetic bracelet corrects the functioning of the respiratory system, the cardiovascular system, supports the body’s defenses during acclimatization or intoxication.

When a magnet is contraindicated?

There are a number of diseases and conditions of the body in which it is impossible to use magnets for medicinal purposes, so as not to aggravate the patient’s situation. Contraindications are absolutely specific and they are all related to the fact that people suffering from these diseases are contraindicated in changes in the circulatory system that magnetotherapy can create. Magnetotherapy is incompatible with:

  • the patient has a pacemaker device;
  • increased bleeding, a tendency to hemophilia and the disease itself;
  • active tuberculosis;
  • pregnancy;
  • terminal states;
  • age up to one and a half years;
  • pronounced somatic pathologies;
  • period within 3 weeks after heart attack and stroke;
  • respiratory or heart failure;
  • fever with a high temperature;
  • mental illness;
  • individual intolerance to the components of the magnet.

Children under 18 years old are shown exclusively local magnetic effects.

Electromagnetic devices

Magneto-infrared laser therapeutic apparatus RIKTA-ESMIL (2) A

Devices treat everything. In the devices, the magnets are arranged in a certain way: a low-frequency field is created, which improves lymph and blood flow. Devices with magnets are effective in the treatment of osteochondrosis, since its cause is a violation of nutrition and blood circulation in the spinal disc, and a magnet just eliminates these problems.

Magnet Application Points

Magnetic field treatment principles

Magnetic field treatment principles

The healing effect of a magnet is due to the fact that the magnetic field can impart certain properties to the blood inside our circulatory system. The magnetic field is safe for people. It, bypassing all integuments, as well as body tissues and bones, affects physiological fluids, in particular, blood, which supplies all organs and tissues of the body with oxygen and nutrients.

  • Magnets improve blood circulation and vascular health. Iron in human blood interacts with a magnetic field. The blood is ionized and begins to circulate more efficiently through the vessels, accelerates congestion. Thanks to a full blood supply, the condition of the nervous system, joints, bones improves.
  • Secondary magnet currents reduce pain.
  • Another result of the magnetic effect on iron-containing red blood cells is the normalization of intracellular polarity, disturbed by all kinds of diseases and mutations.
  • The magnet activates the enzyme systems of the body.
  • The charged metal contributes to the speedy release of the body from toxins and the activation of its regenerative forces.
  • The sedative and anti-inflammatory action of the electric field has also been proven.

Bracelet with hematite, tourmaline and magnets

Unlike other methods of physiotherapy, working with the human body with the help of magnetotherapy excludes external interventions that are different from human nature. That is, the magnet is a natural method of influence, gently stimulating the intensity of blood circulation. The procedures are not associated with any complex equipment, are cheap, devoid of any risk.

Natural and artificially created magnets are used for treatment. The latter can be sources of constant magnetic radiation of various strengths or be activated with the help of electricity. Electromagnets work when current flows through them. At home, this type of magnetotherapy is used in portable devices. The principle of operation of a magnet does not depend on its type (permanent or electric).

The polar poles of a magnet treat various diseases:

009 Cutting a Neodymium Magnet

  • “” Helps with swelling and inflammation;
  • “-” from bacterial infection.

With the help of the influence of a magnetic field on the blood, you can effortlessly solve such problems in your body as: improving the state of the body as a whole; relief of chronic pain; increased immunity; raising vitality; intensification of peripheral circulation; treatment of depressive conditions, etc.

Magnet Disc 8×1

Magnet Disc 8×1

8×1 neodymium magnet is made of rare earth metal. neodymium. Due to the content of this metal, the 8×1 magnet has powerful strength. With its own weight of the magnet 0.38 grams, the magnet is capable of showing unsurpassed results under normal conditions, the holding force reaches 0.650 kilograms. Since neodymium oxidizes very quickly, they came up with a way to preserve it. The magnet protects against corrosion by a three-layer nickel-copper-nickel coating.

The 8×1 neodymium magnet is unique in its size and therefore can be used in any area of ​​production, especially for the production of souvenirs and toys for children. The convenient shape of the disc allows you to use the magnet on any surface and with confidence that your thing will remain intact, because there are no sharp corners. Souvenir magnet. This name of the 8 by 1 magnet was given by the manufacturers of fridge magnets, gift boxes and children’s toys, musical cards. The use of an 8×1 magnet is common not only at large-scale enterprises, but also at home. The magnet attachment is light enough. The minimum thickness that allows you to put a magnet under the fabric allows craftswomen to create bags and wallets at home and according to their own sketches.

It is quite easy to buy an 8×1 magnet, just fill out an electronic application or call our website. Reasonable prices, discounts for regular customers, a system of discounts for wholesale buyers. you will be pleasantly surprised. Please contact us and you will not regret it. Magnets meet the declared characteristics.

Do not try to saw or drill the magnet. You can damage your body and turn the magnet into a regular piece of iron. First of all, it should be remembered that magnets have a bad effect on electrical and electronic devices, you should not use magnets near such devices.

  • Magnets discs
  • Magnet Disc 8×1
  • Amount:
  • Telephone:
  • Description
  • Delivery
  • Payment
  • Reviews (0)

With the help of the “New Mail” company, we are able to offer you the following when receiving neodymium magnets:

Neodymium magnet: how to check quality at home?

The neodymium magnet is one of the most common modern products. The high characteristics of the magnet allow it to be used for many years. It is important to remember that neodymium magnets are quite fragile and can shatter on collision.

Where are used?

The popularity of this magnet is due to the variety of shapes and sizes, as well as varieties in terms of power. over, even a small neodymium magnet can have a sufficiently high adhesive force.

Today neodymium magnets are popular in everyday life, they are bought for various needs. However, any popular thing always has a fake, and in order to avoid low-quality products, you need to learn how to check the quality of the magnet.

How to test a neodymium magnet?

Of course, in order to more reliably check the quality of a neodymium magnet, it is necessary to conduct a number of chemical experiments. In this case, the magnet will need to be broken, reaching the very core. There is another way. this is the definition of parameters using special devices.

Of course, the above methods are not entirely suitable when you need to check a neodymium magnet at home, so we will consider other options. Simpler methods of verification will not be able to give reliable results, but they can be used to verify the quality of the magnet.

Home check methods

So, to determine the quality of the product, you can use the following methods:

  • Visual definition (not 100% an option, but the appearance always says a lot). The first and main difference between a neodymium magnet is the presence of a protective copper-nickel coating (ferrite magnets do not cover). Neodymium magnets shiny, ferrite dark gray or black.
  • Iron coated check. The adhesion force of a neodymium magnet is very high, so it will not be so easy to tear off the magnet when it is adhered to a metal plane. As for the ferrite magnets, no force is needed to tear them off.
READ  How To Choose Bits For A Screwdriver

Neodymium magnets are widely used in human life, but with their strength and attractiveness, they are very fragile products that require a certain amount of care. over, large-sized products can be dangerous, therefore, safety precautions must be observed when working with them. By observing all precautions, the magnets will remain intact and working, and you will not get injured.

How to cut a neodymium magnet at home

For many people, the magnet is still a mystery, although people have met this metal and the phenomenon, in principle, for a long time. Even then, a whole system for the manufacture of various magnets was developed. Today, this is far from uncommon and even powerful magnets can be made at home.

Creating a magnet with improvised means

Of course, for many it will seem even something supernatural and may even be a shock, but even now, sitting at home, most people can make a magnet with their own hands. Below are four ways that describe how to make a powerful magnet at home.

The first and probably therefore the easiest way: to implement it, you just need to take any object that can be magnetized (the object must be metal) and hold it several times along the permanent magnet, and this should be done only in one direction. But, unfortunately, such a magnet will be short-lived and very quickly lose its magnetic properties.

This method of magnetization is performed using a battery or accumulator of 5 or 12 volts. Most often it is used to magnetize screwdrivers and is performed as follows:

A copper wire of a certain length is taken, which will be enough to wrap the screwdriver shaft 280.350 times. Wire from transformers, or the one that is intended for their production, is best suited.
The object is insulated, in this case, with the help of electrical tape, the entire screwdriver shaft is wound.
The winding itself is carried out and it is connected to the battery. One end. to plus, the other to minus. The winding should be carried out turn to turn, evenly. The insulation must also be tight.

As a result of these manipulations, it will be much more pleasant to work with a screwdriver. With this operation, you can turn any old unnecessary screwdrivers into a really handy tool.

This option describes how to make a powerful magnet in a fairly simple way. In fact, it has already been completely described above, but this particular method implies a different material. In this case, ordinary metal will be used, or rather a small piece of it, preferably a cubic shape and a more powerful coil. Now the number of turns needs to be increased by 2-3 times for magnetization to be successful.

This method is very dangerous and is strictly forbidden to be performed by people who are not professional electricians. It is carried out strictly in compliance with safety measures, the main thing to remember is that only you and no one else are responsible for life and health.

He talks about how to make a strong magnet at home, while spending a small amount of money. In this case, an even more powerful coil, wound exclusively from copper, will be used, as well as a fuse for a 220 volt network.

The fuse is needed so that the coil can be turned off in time. Immediately after connecting to the network, it will burn out, but at the same time, during such a period of time, it will have time to go through the magnetization process. The current strength in this case will be maximum for the network and the magnet will be powerful enough.

Do-it-yourself powerful electromagnet

First, you need to figure out what it is. An electromagnet is a whole device that, when a certain current is applied to it, works like an ordinary magnet. Immediately after termination, it loses these properties. How to make a powerful magnet from an ordinary coil and iron was described above. So, if instead of iron, you use a magnetic circuit, then just the same electromagnet will turn out.

In order to figure out how to make a strong magnet at home that will work from the network, you just need to remember a little information from the school physics course and understand that with an increase in the coil, as well as the magnetic circuit, the power of the magnet will also increase. But this will require more current to unlock the full potential of the magnet.

But neodymium still remain the most powerful, they have all the most desirable properties and, with their strength, have a small size and weight. How to make neodymium magnets with your own hands and is it possible at all and will be discussed further.

Making a neodymium magnet

Due to the complex composition and special production technique, the question of how to make a neodymium magnet with your own hands at home disappears by itself. But many are still interested in how to make neodymium magnets, because, it would seem, if you can make an ordinary magnet, then neodymium is also quite realistic to make.

But everything is not as simple as it seems in reality. Serious companies are engaged in the production of such magnets; they use special technologies of very powerful magnetization of the material. And this is in addition to the fact that a rather difficult alloy is used in mining and production. Therefore, this question can be clearly answered. not at all. If someone succeeds in doing this, then he can easily open his own production, since he will already have the necessary equipment.

Applying the created magnets

Application for industrial and economic purposes

Home use

Fridge magnets are one of the most common uses for magnets. Also, some use them to stop meters in order to reduce utility bills, but it is strictly forbidden to do so, and it is inappropriate.

Based on this article, you can understand how to make a powerful magnet at home, without spending any special effort and material resources on it. But you should not experiment with a powerful network for people who do not understand electricity and have no idea how it works at all, because it is serious and very dangerous for human life.

Articles, Schemes, References

In a high-quality audio system, the main role is assigned to stereo or multichannel speaker systems.

Search data for your request:

Go to search results

Thanks to them, electrical impulses are converted into sounds of the acoustic range of different frequencies. Someone cares about the pure and as close as possible to the original sound of musical instruments, but for someone the voice of a vocalist, film actors or a teacher from training video courses is in the first place.

How important is the speaker system?

She is the base for the entire audio system.

And for each different equipment options will be a priority. The choice is influenced by such factors as the “sharpening” of such a system for those genres that are to the liking of the future owner and the price category.

For lovers of the most accurate sound, hi-fi speakers are suitable.
Despite the myths, not every expensive audio equipment shows the mentioned possibilities.

When exclusive comes first, the audio system market provides high-end audio fans with Hi-End audio equipment.

Speaker types

There are several categories of loudspeaker systems, each of which is capable of meeting specific customer needs. According to the basic differences, 5 basic classification groups are distinguished.

  • The principle of installing the equipment. Speaker systems are divided into floor-standing and shelf-based, depending on their size. The former are preferred for large spaces such as cinemas. Using them at home for a TV or computer is unprofitable. Optimal use of bookshelf speakers.
  • Number of speakers. This is also called dividing by the number of sound strips. The manufacturer can include from 1 to 7 speakers. The most optimal option for a budget is 3 speakers, where one band is responsible for the low frequencies, the other for the middle and the third for the upper.
  • The presence or absence of a sound amplifier in the speakers. In the first case, they are called active, in the second. passive. Passive options are much more common. They are preferable for audiophiles due to the crossover filter and, accordingly, higher sound quality due to frequency separation.
  • By design, the speakers differ into planar, dynamic, electrostatic and other types, and in some cases the equipment does not fall into any category.
  • Registration. The speakers can have a closed or open case, a good addition would be a phase inverter. a pipe in a speaker tuned to a certain frequency and amplifying sounds within it. Thanks to this hole, lower frequencies are reproduced than with conventional equipment. If the pipe is bent inside the cabinet, increasing its length, power and the range of reproducible low frequencies, you get speakers with an acoustic labyrinth. They are more expensive and require more precision to manufacture.
READ  How to make an 18v 220v screwdriver

Areas of use of speaker systems

The first and main area of ​​application is home use.

This includes the need for high-quality sound for a more immersive video game, the power and strength of sound for watching TV, clarity and closeness to the original sound for music lovers of various genres.

over, for the best sound in the front of the car there are high-frequency and mid-frequency elements of the Car-system. The low-frequency speakers are assigned to the rear often auto.

Concert speaker systems are designed not only to provide sound access to anywhere in a large room or hall, but also to meet the requirements of many listeners for sound quality. The most common sets of audio equipment for concerts include monitors for transmitting nuances of sound, front speakers for direct sound with high density, center speakers for transmitting vocals.

How to drill a magnet from a speaker

A separate category is recording studios. For them, studio monitors are preferable, which are able to reproduce sound with all its pros and cons, which ultimately contributes to the creation of a cleaner and more reliable track.

With their help, it will be possible to obtain equipment that can bring you as close as possible to the sound of your dreams.

14 posts in this thread

Create an account or login to comment

You must be a user to post a comment.

Wait until the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

How to drill a magnet from a speaker

How to drill a magnet at home

We strongly advise against drilling (or sawing) neodymium magnets yourself. A neodymium magnet alloy is obtained by sintering the components of the magnet. This technology allows to obtain neodymium magnets of any configuration and reduces their production costs, which makes neodymium magnets affordable. However, the material of the magnet turns out to be sensitive to mechanical stress, it is fragile and brittle.

The drilling process generates excess heat and high temperatures can demagnetize the magnet. Drilling sawdust is highly flammable, which naturally increases the risk of fire.

Neodymium magnets are machined with a special diamond tool under constant water cooling. These operations are usually performed even before the magnetization of the future magnet.

Accordingly, the conclusion suggests itself, if you need a magnet of a smaller size or with a hole, you just need to choose a neodymium magnet according to the required characteristics in our catalog.

Four ways to show at home how electromagnetism works

Flying rain

You need: Christmas rain (a thin strip of aluminum 30 cm long), an aluminum plate (at least 20 cm in diameter), a clean, dry piece of woolen cloth, a piece of thick Styrofoam (larger than a plate), scotch tape, a styrofoam cup.

Attach the cup to the center of the plate with tape.

Tie a rain ring.

Rub the foam with wool for 30 seconds.

Holding the glass, put the plate on the styrofoam.

Raise the plate so that it “looks” with the outside at the ceiling.

Throw rain on a plate.

The experimenter rubs the woolen cloth over the dielectric. Because of this, electric charges of the opposite sign remain on the fabric and on the foam plate (the same happens when the hair is electrified against a woolen sweater).

When a metal plate is placed on a dielectric, charge is transferred to it. If you throw the foil, it will also receive the opposite charge and will fly over the saucer. the charges are repelled, and the foil is very light.

The glass is needed so that when the experimenter turns the plate over, the charge from it does not dissipate due to contact with his hands, and the plastic is a dielectric, it does not conduct current, therefore the charge remains on the plate.


You need: copper wire, iron nail, magnet, battery, paper clips (or buttons), electrical tape.

Wrap the nail with wire so that there is a supply of wire on both sides.

Make eyelets at the ends of the wire.

Connect the loops to the battery poles.

Bring the structure (it is better to wrap the battery with cloth) to the scattered paper clips.

4 Places To Find Neodymium Magnets At Home (Life hack)

A current flows through the wire, a magnetic field arises in the center of the coil. The wire is wrapped around the nail, the nail is magnetized and attracts iron objects. If the battery is disconnected, the nail will have a residual magnetic moment, and it will work like a magnet for some time.

Electromagnetic train

You need: neodymium magnets, wire cutters, copper wire, battery (AAA).

Roll up the wire in the shape of a spring (you can wrap it around an AA battery, the main thing is that the diameter is slightly larger than the diameter of the magnets).

Stretch the twisted wire so that the turns do not touch each other.

Attach magnets to the ends of the battery. Magnets must “look” at each other with the same poles.

Place the battery with magnets inside the spring.

Magnets are made from a conductor. When the magnet touches the wire, the circle closes. current flows from the battery into the wire, a magnetic field appears in the wire, and it pushes the magnets with the battery forward. If both magnets are attached with the other side to the battery, it will go in the opposite direction.

Electrons and protons spinning the tin

You need: a ball and a beer can.

Rub the ball on your hair, bring it closer to the tin, and slowly move it away. Observe the interaction of electrons and protons.

The ball is made of dielectric. If you rub it with a cloth (or rub it against your hair), charges will remain on it. And when it is brought to a metal tin, these charges will entail a redistribution of charges in it: the charge opposite to the charge of the ball will be closer. They will attract.