How To Cut Blinds To Width
Shorten horizontal blinds
Consider how to shorten horizontal blinds and what it takes.
Horizontal products differ somewhat in design, but, like the vertical type, they include the following elements:
- Brackets for wall mounting;
- Common cornice;
- Cloths or slats;
- Lifting mechanism;
- Handle for turning;
- Cord for vertical movement.
To shorten the blinds, you first need scissors.
Lamellas can be made of aluminum, plastic or wood. In order to reduce horizontal blinds in length, from the tools you will first need scissors.
Before starting work, measuring the required length of the panel. The plugs on the lower bar are opened, then it is necessary to untie the knots on the restrictive rope and remove the clips.
We make the shortening: Remove the extra lamellas, then put on the clamps, tie the knots.
We remove the extra slats, put on the clamps, tie the knots
Reducing the length of the lifting cords. Now you can put the bottom bar back in place.
The height is shortened according to these instructions.
To reduce the width, remove the side eaves cover. Saw off the cornice to the required size with a hacksaw and return the lid to its place.
Shorten vertical blinds
Before shortening the vertical blinds, consider their design.
This product consists of several elements:
- Carrying and decorative cornice;
- Runners, to which the canvases are suspended;
- Bottom connecting chain;
- Weights to create weight for canvases
- Chain or control cord, slats.
Canvases can be made from fabric, plastic, aluminum or bamboo. For how to shorten the blinds, see this:
In order to shorten vertical blinds, simple tools are needed:
- A hacksaw for metal or a saw with fine teeth;
- Crosshead screwdriver;
- Scissors or paint knife;
- Roulette and ruler;
- Matches or lighter;
- Iron;
- Pencil.
How to cut blinds to size
When buying blinds for windows, they often face a problem when their dimensions do not match the dimensions of the windows. Such cases are possible with non-standard proportions of windows or when the width or length of the blinds with the pattern you like may NOT match the size of your window. In this regard, the question arises of how to shorten the blinds in height on their own and how difficult is it to accomplish? It is not difficult to shorten them, but you will need to follow the instructions, I apply maximum attention and accuracy.
Shorten the blinds
When starting the shortening procedure, it should be borne in mind that there are several types of blinds: vertical or horizontal, and also that reducing the size of this product has its own characteristics.
General sequence of work
The process of shortening vertical blinds includes the following steps:
- It is necessary to spread the finished product on the floor and start work from the top and from the side where the lifting mechanism is located.
- Remove the side cover by prying it gently with a knife, and unscrew the fixing screws.
- Dismantle with a runner from the cornice and from the canvases. The runners are made of plastic, therefore, when handling them, you need to be very careful and NOT make any significant effort.
If it is necessary to reduce the width of the blinds, this can be done when the side cover of the cornice is removed. The cornice strip can be shortened, if necessary, by sawing off with a hacksaw and installing the elements in the opposite direction.
In order to shorten the panels made of aluminum, plastic or bamboo and NOT spoil them, you need to contact a specialist. For the features of shortening vertical blinds, see this:
You can do it yourself to reduce the length and width of horizontal products. To do this, the suspensions are removed, the cornice and panels are sawed off to the required size, and then everything is assembled in the reverse order.
Picking up tools
In order to cut the roller blinds in width yourself, you will need the following tools:
- Soap or special tissue pencil;
- Household scissors or a sharp stationery knife;
- Needles, threads;
- Tape measure.
If the curtains are too wide, beyond the size of the window, you need to narrow them. Initially, you need to unfold the canvas, after removing the plugs. Please note that the rolls are equipped with special weights, which must also be removed and cut in accordance with the dimensions of the new window.
How to cut roller blinds to the width yourself
Roller blinds are most often trimmed in order to change the design of the room, decorate, adjust them in accordance with the size of the window openings. This is necessary when changing your place of residence. If initially your window had the same dimensions, and then you moved into another apartment and at the same time DO NOT want to buy new window structures, you need to know how to cut roller blinds in width yourself.
Anyone can do this in the presence of an ordinary tool, which is at the hand of every housewife. In order to get started, you first need to measure the size of the window. To do this, follow these step-by-step actions:
- Hang the fabric on the cornice above the window.
- Spread the curtain material, let it hang a little, take the final shape.
- Make accurate measurements and write down the information received.
The length can be reduced in size in a matter of minutes. To do this, simply make a double or triple hem and hide in this way up to 20-30 cm of rolled fabric.
Step by step guide
Use soap and a tape measure to mark the curtain fabric accordingly. Before you cut the roller blinds shaft and bring it to the required length, you need to measure the width of the window, stepping back 2-3 cm from the length of the bracket.
Then you need to install the plugs and cut off the excess part of the rail, which in the end should be equal to the length of the shaft.
The curtains are also marked with soap and a tape measure. With a sharp clerical knife or ordinary household scissors, the curtains are cut to the width of the bottom of the rails.
Then the material is attached to the shaft. To do this, it must be tightly wound, having previously glued a protective tape with a self-adhesive base. The canvas must be wound carefully and adhere to a strictly horizontal position in relation to the shaft. Avoid the slightest distortion, as in this case all the work will be done in vain.
Fold 5 cm of the blade so that a fold is formed where the shaft with the glued tape will be installed. DO NOT indent too much, as the shaft will then slip and will NOT be able to firmly lock in the desired position.
Then you need to roll it along the top of the curtain and roll it 3/4 of the length. Install the bottom rail into the hole on the curtains. Insert the bracket into the very end of the control mechanism, then insert the other end in the same way. Upon completion of the work, all the parts that secure the system must be assembled, and the roller blind, shortened in width, must be hung in the designated place.
As you can see, cutting the roller blinds to the width yourself will NOT be difficult. Here the main thing is care and diligence, as well as free time and the availability of the necessary working tools at hand.
Picking up tools
In order to cut the roller blinds in width yourself, you will need the following tools:
- Soap or special tissue pencil;
- Household scissors or a sharp stationery knife;
- Needles, threads;
- Tape measure.
If the curtains are too wide, beyond the size of the window, you need to narrow them. Initially, you need to unfold the canvas, after removing the plugs. Please note that the rolls are equipped with special weights, which must also be removed and cut in accordance with the dimensions of the new window.
How to cut roller blinds to the width yourself
Roller blinds are most often trimmed in order to change the design of the room, decorate, adjust them in accordance with the size of the window openings. This is necessary when changing your place of residence. If initially your window had the same dimensions, and then you moved into another apartment and at the same time DO NOT want to buy new window structures, you need to know how to cut roller blinds in width yourself.
Anyone can do this in the presence of an ordinary tool, which is at the hand of every housewife. In order to get started, you first need to measure the size of the window. To do this, follow these step-by-step actions:
- Hang the fabric on the cornice above the window.
- Spread the curtain material, let it hang a little, take the final shape.
- Make accurate measurements and write down the information received.
The length can be reduced in size in a matter of minutes. To do this, simply make a double or triple hem and hide in this way up to 20-30 cm of rolled fabric.
Step by step guide
Use soap and a tape measure to mark the curtain fabric accordingly. Before you cut the roller blinds shaft and bring it to the required length, you need to measure the width of the window, stepping back 2-3 cm from the length of the bracket.
Then you need to install the plugs and cut off the excess part of the rail, which in the end should be equal to the length of the shaft.
The curtains are also marked with soap and a tape measure. With a sharp clerical knife or ordinary household scissors, the curtains are cut to the width of the bottom of the rails.
Then the material is attached to the shaft. To do this, it must be tightly wound, having previously glued a protective tape with a self-adhesive base. The canvas must be wound carefully and adhere to a strictly horizontal position in relation to the shaft. Avoid the slightest distortion, as in this case all the work will be done in vain.
Fold 5 cm of the blade so that a fold is formed where the shaft with the glued tape will be installed. DO NOT indent too much, as the shaft will then slip and will NOT be able to firmly lock in the desired position.
Then you need to roll it along the top of the curtain and roll it 3/4 of the length. Install the bottom rail into the hole on the curtains. Insert the bracket into the very end of the control mechanism, then insert the other end in the same way. Upon completion of the work, all the parts that secure the system must be assembled, and the roller blind, shortened in width, must be hung in the designated place.
As you can see, cutting the roller blinds to the width yourself will NOT be difficult. Here the main thing is care and diligence, as well as free time and the availability of the necessary working tools at hand.
Recommendations on how to easily shorten vertical blinds
Blinds. comfortable modern decor, ideas for home interior decoration with the introduction of stripes are always original. Blinds slats are made of various materials: fabric, bamboo, plastic.
To reduce their number, lay the lamella base on the floor, remove the side cover from the side of the lifting mechanism, unscrew the fixing bolts. Remove excess slats, shorten the length of the cords.
Trimming of fabric slats in width is practiced, each is unhooked from a slider, tucked in or cut off with a cut.
Step by step guide
Use soap and a tape measure to mark the curtain fabric accordingly. Before you cut the roller blinds shaft and bring it to the required length, you need to measure the width of the window, stepping back 2-3 cm from the length of the bracket.
Then you need to install the plugs and cut off the excess part of the rail, which in the end should be equal to the length of the shaft.
The curtains are also marked with soap and a tape measure. With a sharp clerical knife or ordinary household scissors, the curtains are cut to the width of the bottom of the rails.
Then the material is attached to the shaft. To do this, it must be tightly wound, having previously glued a protective tape with a self-adhesive base. The canvas must be wound carefully and adhere to a strictly horizontal position in relation to the shaft. Avoid the slightest distortion, as in this case all the work will be done in vain.
Fold 5 cm of the blade so that a fold is formed where the shaft with the glued tape will be installed. DO NOT indent too much, as the shaft will then slip and will NOT be able to firmly lock in the desired position.
Then you need to roll it along the top of the curtain and roll it 3/4 of the length. Install the bottom rail into the hole on the curtains.
Insert the bracket into the very end of the control mechanism, then insert the other end in the same way. Upon completion of the work, all the parts that secure the system must be assembled, and the roller blind, shortened in width, must be hung in the designated place.
As you can see, cutting the roller blinds to the width yourself will NOT be difficult. Here the main thing is care and diligence, as well as free time and the availability of the necessary working tools at hand.
Doesn’t fit the size How to cut a roller blind with your own hands?
If you cannot find blinds of suitable dimensions in any way and DO NOT want to contact the master for individual sewing, as it is very expensive, then you can solve this problem on your own by cutting the roller blinds to the right sizes.
Reducing horizontal blinds
There are two types of constructions for windows and openings:
- Gathering along the guide cords, they are made dense;
- Soft, rolling on a roller (in fact, these are roller shutters consisting of strips).
We adjust the blinds to the required dimensions from below. We remove the clips, remove the necessary number of lamellas, cutting the cord to the desired size. The length of the chain, thanks to which the lamellas rise up, and do not correct.
How to trim yourself?
Roller blinds, as a rule, are cut when it is necessary to change the decor of the room or if they DO NOT match the size of the window openings, which often happens when moving and changing residence. Any hostess can shorten the rolled canvases.
First, the fabric should be hung on the cornice, after it straightens out and takes its final shape, measurements are taken. In this case, the decorative processing of the product below will depend on the type of fabric.
The easiest way to reduce the fabric is considered to be a double hem, with which you can hide up to 30 cm of fabric without trimming.
In the event that the curtains are sewn of silk or organza, it is impossible to apply markings on them, otherwise traces may remain. To prevent this from happening, use universal adhesive strips.
They are pre-ironed with an iron, and then the canvas and the bent piece are fastened. Ironing the strips is necessary through gauze, laying the fabric on a soft towel.
The edges of the roller blinds can also be finished with an edging, which is a fabric tape. It is first fixed with pins, then stuck in. At the same time, it is not necessary to shorten the curtains from the bottom, there is a way to reduce the length from the top edge.
Regardless of the type of trimming, you will need tailor’s soap, scissors, iron, threads, needles and a tape measure.
The shortening process itself consists of several stages.
- The edge is cut first. This should be done carefully, otherwise rushing can lead to deformation and damage to the fabric. Initially, the edges are processed on the sides, then the curtain is bent, well ironed and sewn.
- Next, a braid is attached to the top of the future curtain, bending the edges of the canvas by 2-3 cm. The ribbon is applied from the seamy side of the product and sewn. The number of seams in this case depends on the width of the tape. The bottom of the roller blind should be double-folded.
- The completion of the work is the drapery.
Trimming the curtain to the width
In order to measure and cut the curtain to the required width, Spread the curtain on a flat surface. Mark out the curtain using the lower rail already cut to the required width. Trim the curtain fabric. This is best done with a sharp construction knife, but you can also use scissors.
How to shorten roller blinds in length
The choice of design for small rooms, attics is associated with the problem of decorating non-standard windows. The situation is saved by roller blinds or roll-up blinds. They fit tightly to the frame. They are convenient and easy to use. One problem. there are short models on sale, although the width of the roller blind can be adjusted to the size.
Cutting open structures is simple: just reduce the length of the canvas from above, tear it off the roller, straighten it, cut it. Edge Fixed with glue on the tube.
Some people prefer NOT to disassemble the roller, the fabric is cut from the bottom, leaving a 5 cm allowance. It is necessary to make a drawstring for the weight. Without it, the canvas will dangle.
It is more difficult to trim closed roller blinds or curtains. Gently pull the fabric out of the guides, reducing by the required length.
The guides themselves also need to be subtracted. We take out the plugs from them, we cut the plastic with a knife, aluminum. with a hacksaw for metal or a jigsaw.
We remove burrs, align the cut, tuck the canvas into the guides, Install the plugs in place.
Types and sizes of roller blinds
Manufacturers offer a huge range of roller blinds, among which you can choose products of any size and for any window. But still, sometimes there are situations when the roller blinds offered by the seller do not have the right size for your windows.
This usually happens if windows of non-standard sizes were laid in the building project, or the dimensional grid of the roller blinds you liked is limited and does not contain a model suitable for you.
In this case, there are two ways out of the situation:
- Order custom tailoring of roller blinds. The most convenient solution to the problem. With minimal effort on your part and without any hassle, you will receive roller blinds that will fully meet your expectations and dimensions of the window opening. But this method has a significant drawback. the high cost of the finished product.
- Buy a sun protection system as close as possible to the size you need, but slightly larger than it, and cut the roller blind yourself. Having decided to do this, you will need to make some effort and spend a little personal time, but the curtains will cost you inexpensive.
The following types of roller blinds are on sale:
Their feature is an open shaft, which is NOT protected by anything. Such blinds are inexpensive, take up little space, and can be mounted over window openings or on each window sash. The maximum web width in them is 1.8 m, height. 2 m.
Roller blinds of this type are equipped with a plastic box, which hides the rotating shaft and protects it and the wound web from dirt and accidental damage. Another difference is their small size. The width of the web starts from 0.7 m, the length does not exceed 2.2 m.
Available in lengths up to 4.5 m and widths up to 3.5 m, these roller blinds are ideal for large window openings such as panoramic windows or wide windows in office buildings.
Roof roller blinds are designed to be installed on sloped windows. For a snug fit to them, they are specially equipped with side guides that hold the canvas along the window sashes. Their height. no more than 2 m, width. no less than 0.7 m.
How to cut ROLLERS to width
Cutting roller blinds in width is more difficult and requires more care. Preliminary preparation and measurement is done in the same way as described above. After all measurements are made and the fabric is marked, you can proceed to fitting the canvas to the desired size. The scheme of work is as follows:
- Lay out the curtains on a flat surface, disassemble into components (take out the shaft and weighting agent) and unfold the fabric.
- Cut the shaft to the required width. Please note that its width should be 8-10 mm more than the width of the canvas. It is better to cut with a hacksaw. After trimming the edges, be sure to process with sandpaper or a file so that there are no chipping in which the fabric can catch.
- Assemble the curtain back into a single structure and hang it on the window.
It should be remembered that trimming the roller blinds immediately voids the warranty on them. Therefore, it is worth starting this operation if there are no other options anymore or the guarantee is not too important for you.
How to shorten horizontal blinds in height?
When performing such a procedure, do not forget that the lamellas can be made of both aluminum and plastic or wood. Before starting work, you need to measure the required length of the panel. It is worth mentioning that it is better to carry out such operations on its own with cheap curtains, and it would be more correct to entrust the adjustment of expensive models to professionals. In order to correctly do all the actions, you must keep at hand:
- Scissors;
- Screwdriver;
- Roulette;
- Pencil.
These are the basic tools, without which the procedure for decreasing the height will be impossible. Such devices are in the arsenal of every owner, so all actions can be performed at home, and not by contacting specialists. When everything is ready, you can start working:
- Measuring the Required Length;
- Open the bottom plugs;
- Untie the bounding knots;
- Remove the clips;
- We remove unnecessary lamellas, return the clamps to their place, tie the knots.
If you follow the described algorithm, then everything will turn out beautifully. However, in order to do everything correctly, you need to have a minimal understanding of the blinds device.
How to cut roller blinds to width?
Like the other procedures mentioned above, this must be done carefully and followed by a clear algorithm or instruction. It is best to call for help from another person, who will be.Make sure that the canvas is flat and the mowing line is at the right angle.
It is worth preparing the necessary set of tools in advance. In order to carry out the procedure in full, you need to keep at hand:
- Phillips screwdriver;
- Pencil or other writing object for drawing lines and making marks;
- Roulette for measuring the required width;
- A hacksaw for metal or a saw with fine teeth;
- Construction knife or well-sharpened scissors.
A person who decides to shorten the product at home will NOT be able to do without the listed tools. When performing work, you need to adhere to the following algorithm:
- First of all, it is necessary to trim the roller blinds shaft. To do this, subtract the thickness of the brackets from the total width of the product, which must first be measured. Then you should measure the required shaft length and cut off the excess with a hacksaw, install a special plug, and then saw off the lower rail of the same size;
- The next step is to trim the width of the canvas. To do this, spread the canvas on a flat surface to mark it, using a pre-cut strip to the desired length. Then the canvas is cut with a construction knife or sharpened scissors.
The sequence described above should not be violated in any case, as this may entail the purchase of new blinds instead of damaged ones.
How to shorten vertical blinds in length?
Cloths of such curtains can also be made of plastic, aluminum, fabric, bamboo. Of course, you can shorten them at home. However, if the product is made of a certain material, then it is unlikely that a person without Special skills will be able to cut it correctly without spoiling it. These types of blinds include those made of aluminum, plastic or bamboo. You will need:
- A hacksaw for metal, which can be replaced with a fine-toothed saw;
- Crosshead screwdriver;
- Painter’s knife or regular scissors;
- Ruler or tape measure;
- Matches;
- Iron;
- Pencil.
To some, such a set of tools may seem a little strange, but if you do everything according to the instructions, then you will not be able to do without the listed items. In order for the shortened blinds to please the eye, it is necessary to adhere to a certain algorithm:
- Remove the side cover;
- Dismantle with a slider;
- Measure the length of the curtains;
- Cut off the panels;
- Roll up edges, fixing folds.
It is worth remembering that a bar is attached to each canvas, after which the entire structure is attached to the cornice. For this reason, we must not forget that in the middle of the canvases you need to make holes for the ears.
How to shorten roller blinds in length?
- Measuring instruments such as a ruler or tape measure
- A writing device that can be marked, such as a pencil;
- Hacksaw for metal;
- A sharp construction knife or scissors;
- Double-sided tape for fixing.
Using the listed set of tools, you can cut roller blinds at home without the help of specialists. In order to reduce the length to the size of the window opening, you must:
- The first step is to measure the length. In this case, you need to spread it out on a flat surface;
- Next, you need to carefully and evenly cut off the unnecessary part of the product.
The process is NOT complex and can be performed by any person, and not with special skills and knowledge.
How to shorten (cut) blinds. Methods for shortening blinds
Such a procedure must be performed with special care, I pay maximum attention. There is a certain sequence of actions that must be followed if there is no desire to spoil the product. They are of different types and the procedure is unique for each.
The need for it appears when, after purchase, it is found that the curtains do not fit the window in width or height.
As mentioned above, for each type of blinds, there is a special procedure for adjusting to a specific window opening. Each has its own characteristics, and not having studied which you can simply ruin the product. For this reason, it is necessary to treat the described procedures with special attention and accuracy.
By length (height)
The standard distance from the slats to the floor is considered to be up to 20 millimeters, and in order to raise them higher, you will have to resort to shortening them. This activity is NOT too difficult, but requires perseverance and knowledge of the process. Pull out the slats from the sliders, and then from the lower plastic strip that secures them. Gently tuck the edges to the distance you need, cut with great care and be sure to process the edges to shorten the blinds. Any fabric is well fixed with fire, so it is better to burn the fabric vertical slats with a lighter or a match. Insert the lower plank back. and enjoy the change in the design of the room with your own hands.
By width
To shorten the horizontal blinds in width, you will need more accessories and tools: a hacksaw with fine teeth, a file and sandpaper. You need to start from the same thing. remove the lower bar from the eaves, pull out the plugs and protective covers from it. Then fold the slats in an even pile and fasten them with an elastic band so that they do not creep, interfering with the lesson. For fixing, you can use adhesive tape or electrical tape, but at the same time be prepared for the subsequent wiping of the remnants of the adhesive layer from the surfaces of the lamellas. Next, you need to saw off the extra width for you along the previously marked marks with a hacksaw and eliminate irregularities and roughness with a file or sandpaper. Next, the final stage before assembly is painting the cuts. Reducing the width in this way will only work for the holes in the lamellas intended for the cord. Or you have to use a drill to drill new.
How to shorten vertical blinds. How to shorten blinds in height (length) or width. How to shorten horizontal blinds
By width
Usually there is no need to shorten the vertical blinds in width, because, even speaking a few centimeters, they look quite nice and neat. But, if you really want to, there will still be NO serious problems with this. The main task is to shorten the cornice and the stem, at the end of which the club with petals is fixed. Ideally measure the area where you will be sawing, cut off the aluminum rod itself. the base of the eaves. and sand the cut edges with sandpaper or a file. After that, it remains to shorten the chain of vertical blinds and get rid of unnecessary slats.
Height
You can shorten the standard horizontal blinds both in height and in width, if you know a few simple tricks. If you want to shorten the blinds in height, you, first of all, need to pull out the control cord from the lower bar, removed the two plugs securing it. Mark the level to which you intend to shorten the blinds, and remove the ladders, the thin connecting rope, from all the slats to the level you indicated. Then pull out the first lamella from the mount, which is below the mark and insert the lower bar in its place. The remaining planks are cut off together with the ropes of the control cord and fastening the bottom plugs.
Is it possible to shorten the blinds?
From the above, we conclude that it is possible to shorten the blinds at home, but subject to preparation and availability of the necessary good components. Company “Master suite” has long been rooted in Ukraine as one of the best manufacturers of components and firmly defends its position. Any details for shortening horizontal or vertical blinds can be purchased from “Master suite”!
Tips on how to shorten vertical or horizontal blinds
Many hostesses are wondering how to shorten vertical or horizontal blinds, if the length, height and width of the window changes after repair? The same question arises if their length, width and height are standard, and the window in the house is non-standard. How to shorten horizontal or vertical blinds, rather than with the help of a professional, it is recommended to Read more.
How to shorten vertical blinds
Depending on the type of blinds, it may be necessary to adjust their size; length, width or height may be shortened. For example, if the product is made of metal, you can use a screwdriver and scissors. If the material of the product is different, other devices will be needed in order to shorten the blinds.
How to shorten vertical blinds? And what might be needed for such a painstaking procedure? In order to independently carry out the shortening of the curtains at home, you may need special tools, which may not always be in the owners’ arsenal. Therefore, many people prefer to contact those people who know how to do this.
The width of such a product is shortened due to the fact that the cornice is trimmed. For visual harmony, it is necessary that the length of the cornice exceeds the size of the window. The required size of the product is measured using a tape measure, and the indicated size is marked with a pencil. After that, the blinds previously removed from the window are directly shortened (photo). To shorten the curtain rod, you will need such devices as a hacksaw for metal or an angle grinder and a sander (with which the edge of the product is evened).
You will also need devices such as a tape measure, a screwdriver. The trimming of the curtain rod should be carried out in the place where the lifting device is located. To shorten the blinds, unscrew the side cover with a screwdriver, remove the cord to the side, cut the product, the length of which is marked in advance. The cut is neatly trimmed, hooks unnecessary after trimming are removed and the cord and chains are shortened. After the performed manipulations, the side cover is attached back, the blinds are hung on the window. This way you can shorten the blinds in length.
The fabric in each strip must be folded, drill holes for fasteners, and then fix the bar, pre-wrapped it in fabric. Next, the lamella with fasteners is stitched or fixed with glue. After the glue has dried, you can already assemble the structure and hang it on the window. This way you can shorten the blinds (on). The process of shortening horizontal or vertical curtains differs in its features and execution algorithm; different tools will also be required.
How to shorten horizontal blinds
You also need to know how to shorten the height of the blinds, how to shorten the horizontal blinds. Depending on what needs correction. length or width, the shortening procedure itself will depend. Horizontal curtains are easier to cut than vertical curtains. If it is necessary to shorten the width, simply remove unnecessary lamellas. Such manipulations can be performed without even breaking the structure, and without removing the product. First, you need to decide on the expected dimensions of the product, how many extra slats will need to be removed. To do this, after marking with a tape measure of the window itself and blinds, a mark is placed on the product with a pencil.
Next, the blinds are opened, the rope is freed from the fasteners, with the help of which the curtains are controlled. To accomplish this manipulation, plastic fasteners are pulled out of the lowest bar, the task of which is to fix the lace. The knots are untied or simply cut off the rope. To prevent further unraveling of the end of the rope, the tip is lightly set on fire. After removing the fasteners, pull out the control cord from both ends of the product.
The excess slats are removed, the height of the blinds is adjusted, while the position of the slats is adjusted so that they DO NOT fall down, do not become in an Asymmetric position. The lower bar is fixed to the last lamella, the rest of the lamellas and the lace to control the curtain are passed from it. Plastic fasteners are fixed to the ends of the cord in their original position. It is not recommended to throw away unnecessary slats, it is better to hide them, because in the future it may be necessary to replace any slats of the blinds, which may deteriorate.
It takes a lot of effort to narrow the width of the horizontal blinds and may require special tools. To reduce them, for a start, the cornice itself is shortened, after which the blinds themselves are reduced. Height, width and length of the product are adjustable. After shortening, all parts of the product are assembled, Fix x, saw off the unnecessary part, processing their edges. The assembled product is polished, processed, installed on the window in its original position. It is recommended to carefully, after rechecking all sizes, proceed to the direct shortening procedure so as not to spoil the same product with carelessly performed manipulations.
You can shorten vertical and horizontal blinds on your own, only this procedure requires a lot of effort and patience. You may also need special tools or tools. Therefore, in many cases, the owners prefer to contact the masters who can cope with such a task.