How to cut plastic corners correctly

What glue to use

In addition to the corners themselves, we also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, falls on the walls. As a result, the latter can be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose such an adhesive composition, the excess of which can be removed from the surface.

Basically, the corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since no decoration can hide large bumps. It should be free of foreign objects such as nails, self-tapping screws, etc. It also needs to be degreased, for this purpose white spirit is suitable.

How to cut and glue corners to door and window slopes

How to cut correctly

Before discussing how to attach the corners to the slopes, you should find out how to cut them correctly. After all, this stage of everything is the most time consuming and, perhaps, even the most important, since it depends on how much their edges will join, and this directly affects the aesthetic appearance of the entire room. The best way to do this is with a fine-toothed hacksaw. First, you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Then we cut off the part that will adjoin directly to the slope strictly according to the marks, and the part that will be against the wall at an angle of 45 °.

Use a fine-toothed hacksaw to trim the corner.

Why do you need to fasten the corners to the slopes

Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.

Corners protect slopes from damage

But besides this, they also perform a very important protective function. Sooner or later, you have to carry bulky things through the opening, which is fraught with damage to the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, most importantly, the result is the same. a damaged surface and, accordingly, a view. In addition, as practice shows, most often the wallpaper begins to flake off precisely in these places. So it is best to protect the outer corner of the slope with a decorative element that will also transform the interior.

Corners are not only protection, but also a neat aesthetic appearance

Required tools and materials

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

Installation of corners on the slopes of a window or door

Having figured out what such products are made of, what are their features and having decided on the choice, you should study how to install the corners on the slopes. Detailed instructions are given below.

Plastic, wooden or MDF. which ones to choose?

Making sure that the installation of corners is not just a whim, but a necessity, we will study the construction market in order to make the right choice. These products are divided into types depending on the material from which they are made. So, the corner can be plastic, wooden, bamboo, made of cork or MDF. Absolutely each type has its pros and cons, we will consider them in more detail.

Plastic corners are made by hot folding a sheet of polyvinyl chloride. Basically, they have the same shelf width. from 10 to 40 mm in 5 mm increments. However, there are asymmetric specimens, for example, 10×25 mm, but regardless of this parameter, the angle between the sides is 90 degrees. If it is necessary to transform the arched opening, then this is done by means of a special flexible profile. Their advantages can be called a relatively low cost, they do not need painting, unlike the same tree.

How to Cut Tile Trim. Metal and Plastic

The next type is cork corners. Such decorative elements are quite often used for arched openings, but this does not mean at all that their use is limited only to this area. They can also be used for finishing slopes of various shapes. The cork has a number of advantages, including strength, fire resistance, practicality and environmental friendliness. In principle, this material has practically no drawbacks, except that if your pet wants to sharpen its claws on it, this will damage the surface.

It is also worth noting wooden and bamboo products, which will always be signs of excellent taste and will fit into almost any interior. In addition, we must not forget about their environmental friendliness. True, such elements are somewhat more expensive than their counterparts from other materials, and besides, they often need painting. A material such as MDF can also be compared with natural wood, only it costs significantly lower, because wood dust is used to create it.

Photo gallery: finishing materials

It can be seen that the assortment is quite extensive, and there is plenty to choose from. But what should be guided by this? Of course, no matter how we would like, but almost always the budget is limited. Therefore, first of all, we have to proceed from our financial situation. As mentioned above, plastic products have a very reasonable price, while their appearance is not much inferior to analogues made from natural materials. But, in addition to the price, you should also pay attention to the fact that these decor elements harmoniously fit into the design of the room.

For arches, you should purchase special arched corners of different sexes, they ideally retain their position when bent. Please note that the wider the sides of this element are, the more loads it can withstand.

How to Cut a 45 Degree Plastic Corner

During renovation work in the premises, the skirting boards play a decorative role, they are the finishing touch of the design. They are also designed to close blemishes between different surfaces. Correct gluing of ceiling and floor skirting boards is an easy task, but a responsible one. In this regard, the issue of their installation becomes especially important.

The photo shows the joining of skirting boards in the inner corner of the room.

The skirting board is represented by a very wide range of products:

  • Foamed PVC, plastic, available with cable ducts for wiring and in their absence.
  • Made of wood, made of different wood species, solid, in other words, laminated; Installing a wooden plinth is no different from installing plastic fillets.
  • Iron, iron and duralumin, with cable channels and flat.

Included with plastic or iron products are different connections and ends, with which it is easy to install. Therefore, in fact, the question is never really what, in fact, how to cut plastic skirting boards at the joints. The wood is devoid of such connecting parts. They need to be cut for a perfect connection.

Fundamentally. Fillets made of wood must be kept before installation about the room for which they are provided for more than a day. Just like any wood product, it must adapt to temperature and humidity.

At work, the following comes in handy:

  • miter box;
  • a hacksaw with a small tooth;
  • sandpaper.

Let’s see how the pruning process is carried out.

To connect the planks when walking around corners, the question is, how to cut the plinth at 45 degrees? This is done painfully simple, but it is better to have a special device called a miter box.

Why do you need to fasten the corners to the slopes

Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.

But besides this, they also perform a very important protective function. Sooner or later, you have to carry bulky things through the opening, which is fraught with damage to the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, most importantly, the result is the same. a damaged surface and, accordingly, a view. In addition, as practice shows, most often the wallpaper begins to flake off precisely in these places. So it is best to protect the outer corner of the slope with a decorative element that will also transform the interior.

Corners are not only protection, but also a neat aesthetic appearance

Plastic corners for slopes: step by step installation instructions

Plastic corners for slopes are the logical completion of the renovation in the house. They act as a protective and aesthetic design for doorways, window slopes and corners.

Today we will look at how to glue plastic corners on the slopes with our own hands and the better to glue the plastic corners on the door slopes.

How to glue plastic corners to slopes

How to cut plastic corners into slopes

Compare types and sizes

Framing always starts with choosing the type and size of the plastic element. The table shows data about plastic corners, their sizes and types for slopes:

Type: Size:
Equilateral: 2020. 5050 mm, standard length, fixed for strength.
Not equilateral: 517 and 2025 mm, facing of arch openings, it is customary to install on curved compositions.
T-shaped: 1210, 1810, 2010, 2210 mm, installation is necessary to hide the seams.
Removable (there is a latch): Standard, the shelf is folded back for dismantling. Simple attachment, no need to stick.

During installation, you need to cut the corner to form the desired length. A sharp stationery knife will help with this. If you need to cut at a clear angle, you will need to prepare a miter box and a hacksaw for metal.

Important! Color plastic corner for internal slopes is produced in lengths of 2.6 m, 2.7 m, 2.8 m, 3.0 m.

DEFLECTION 5min. How to glue a plastic corner on the slopes, outer corners of the walls. Corner Plastic Video

Not fundamentally, you will purchase a professional metal tool or more ordinary versions of plastic or wooden fixtures, they will help you do this work in artisanal conditions without unnecessary troubles.

In this case, the cost of a professional device is justified if you often have to do such work. For small volumes, you can limit yourself to more ordinary and cheaper variations.

Fundamentally. The height of the walls at the machine should overlap the height of the trim to be trimmed to obtain an even cut.

Annotation for sawing the inner corners:

  • prepare two pieces of the river for docking;
  • we take the 1st piece, insert it into the miter box from right to left so that it lies for a reason, like on the floor and leaning against the wall of the device far from us, like against a wall;
  • saw down the product from the left end, passing the saw through the holes numbered 1;
  • Insert the second segment into the device from left to right, precisely observing the orientation along the floor and wall;
  • we file it from the right end, passing the saw through the holes numbered 3.5.

Annotation for sawing outside corners:

  • prepare two pieces of plinth for joining;
  • take the 1st segment, insert it into the tool from right to left so that it lies on the base. as on the floor and leaning against the wall of the instrument far from us, as against the wall;
  • we saw it from the left end, passing the saw through the holes numbered 5;
  • Insert the second segment into the tool from left to right, carefully observing the orientation along the floor and wall;
  • we saw it from the right end, passing the saw through the slots numbered 1.

Advice. In the joints along the walls, it is better to cut the planks at 45 degrees; upon completion of such a joint, the joint will be virtually invisible. The trimmed strips are inserted into the tool from 2 sides, seemingly leaning against the wall, trimming occurs through one technological slot. At first, one is cut, then the second is slid towards it, the first is moved away from the gap, and the second is cut.

Required tools and materials

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

How to cut correctly

Before discussing how to attach the corners to the slopes, you should find out how to cut them correctly. After all, this stage of everything is the most time consuming and, perhaps, even the most important, since it depends on how much their edges will join, and this directly affects the aesthetic appearance of the entire room. The best way to do this is with a fine-toothed hacksaw. First, you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Then we cut off the part that will adjoin directly to the slope strictly according to the marks, and the part that will be against the wall at an angle of 45 °.

Use a fine-toothed hacksaw to trim the corner.

What glue to use

In addition to the corners themselves, we also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, falls on the walls. As a result, the latter can be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose such an adhesive composition, the excess of which can be removed from the surface.

Basically, the corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since no decoration can hide large bumps. It should be free of foreign objects such as nails, self-tapping screws, etc. It also needs to be degreased, for this purpose white spirit is suitable.

How to cut plastic corners into slopes

Installation of corners on the slopes of a window or door

Having figured out what such products are made of, what are their features and having decided on the choice, you should study how to install the corners on the slopes. Detailed instructions are given below.

Required tools and materials

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

How to glue

Finally, we got to the main question, how to stick the corners on the slopes. However, before proceeding directly to fixation, you should carry out, so to speak, fitting. After making sure that everything is cut correctly, you can move on. We apply an adhesive solution on the inside of the corner, at the junction of the sides, with a step of approximately 10 cm. At this stage, an assembly gun will be an indispensable assistant. After that, quickly press the product to the surface and fix it in this position with masking tape. You should start with a horizontal slope, and then proceed to the side ones. We remove excess sealant from the surface of the walls with a damp cloth and let it dry thoroughly. You can remove the tape only after 24 hours.

Why do you need to fasten the corners to the slopes

Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.

But besides this, they also perform a very important protective function. Sooner or later, you have to carry bulky things through the opening, which is fraught with damage to the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, most importantly, the result is the same. a damaged surface and, accordingly, a view. In addition, as practice shows, most often the wallpaper begins to flake off precisely in these places. So it is best to protect the outer corner of the slope with a decorative element that will also transform the interior.

Corners are not only protection, but also a neat aesthetic appearance

What to mount

The choice of the method of attaching the corners to protect the corners of the walls depends on the material of the corner, on what surface they will be attached to. The most commonly used glue. over, the leaders are “liquid nails”. This is a universal compound, but check that the specific brand can adhere the materials you need before buying.

You can put a corner on the glue if it is even, without big flaws. If there are pits / depressions, you are unlikely to glue it. In this case, silicone can be used. If you glue the white corners, you can use white silicone. Under the color it is better to take transparent. It is not always desirable to use acidic. Although cheaper, it can damage metals or paint.

In both cases, the wall and corner must be clean and dry. The composition is applied to the corner, it is pressed against the corner, fixed with strips of masking tape. We grab it after 40-60 cm.If everything is even, it is possible after 60 cm, if it is necessary to repeat the shape, after 40 cm or even more often.

How and what to glue a PVC corner to the wallpaper

Leave in this state until the glue dries or the silicone hardens. See the package for the exact time. Then the masking tape can be removed. It differs from ordinary adhesive tape in that it peels off even from paper wallpaper without damaging the surface. But to be sure, try sticking and peeling in an inconspicuous place.

Foam rubber corner. L-shaped and universal on a self-adhesive base

There is another option for how you can glue the corners on a wall with wallpaper, painting. You can use double-sided tape. Glue it first to the corner, then, after removing the protective coating, press it to the corner. There are corners to which the tape is already glued. Certain types of foam rubber or plastic (usually flexible or multipurpose).

plastic, corners, correctly

Decorating slopes with decorative plastic corners

Papered and plastered outer corners need protection. Wallpaper from frequent contact is overwritten, the putty is destroyed. You can solve the problem with decorative corners. The corners to protect the corners of the walls can be of different materials.

Corners for protecting wall corners: selection options

This technique of decorating the corners of the walls. protective corners. not everyone likes, but there are no special alternatives. In any case, on the walls covered with wallpaper, the corner is still better than sticking out and torn canvases.

There is only one solution to the integrity of wallpaper without the use of decorative corners. to make not an acute angle of the slope, but a rounded one. In this case, there will be no problem with its finishing. You can simply wrap the wallpaper canvas without cutting it. But you need to bring out the corner perfectly, otherwise you will have to cut it again, which means that the question of protecting the junction of the wallpaper on the corner will again arise.

It is important to choose the right decorative corner so that it does not look alien. There are special tricks for this.

Appropriate interior looks good

It is necessary to choose corners to protect the corners of the walls based on the general design of the room. There are several standard solutions:

    In tone with the wall decoration. Full color match is desirable, and even better if the texture is similar.

Either to match the walls or to match the doors

plastic, corners, correctly

One of the options, quite logical

In general, choosing corners to protect the corners of the walls should be tied to the design of the room. This can be done after the furniture and textiles are placed. In this case, it is easier to imagine the end result. Because the picture in our head can be very different from reality.

One of the transparent protective corners

If you can’t find an acceptable color in any way, but you need to protect the corners in the apartment, pay attention to the transparent plastic corners. They are of different types. rigid, flexible, with different wall thicknesses.

Shapes and sizes

The finished corners usually have an angle of 90 °. The angle itself is not always sharp, there are options with a rounded one. By type, the corners for protecting the corners of the walls are divided into:

  • tough
  • external;
  • internal;
  • flexible (plastic, rubber)
  • universal.
  • Universal corner from MDF

    Questions can only be universal. These are two strips of plastic or MDF connected by a thin strip of flexible material of the same color. Thanks to this connection, you can make an obtuse or acute angle, internal or external. without much difference. But in terms of protection reliability, it is inferior to rigid ones. after all, the flexible part is quite thin.

    It is also worth knowing that the corners can be with shelves of the same and different widths. often they are found with the same, but it is quite possible to find those in which one is wider, the other is narrower.

    Types, shapes, sizes

    The shelf width differs from manufacturer to manufacturer. Plastic, for example, can have shelves from 10 mm to 50 mm. MDF corners are minimally made with a shelf width of 20 mm, metal corners. from 10 mm, but the maximum shelf length is 90 mm (aluminum). So there is plenty to choose from.

    Types of protective corners: from what materials

    According to the area of ​​application, the corners are for external (outdoors) and internal use. For now, let’s talk about how to protect corners in an apartment and a house. indoors. Let’s start with the materials. The corners to protect the corners of the walls can be:

    • Made of plastic (PVC). Different colors, textures, there are even transparent.
    • Made of metal. Brass, aluminum (polished and not), stainless steel, painted and unpainted.
    • Wooden. Made of different types of wood, smooth, with a relief.

    The corner on the arch is pasted over with a flexible plastic corner

    plastic, corners, correctly

    Cork corners for corner protection

    Arch decoration

    Arch design is often a problem. In general, there are not many outside corners in the apartment, but they are mandatory on the arch. And in the aisle, they very often hurt. Either with furniture, then with another load, or simply a resident who did not fit into the opening. And there are no questions with the direct part, then the rounded part can be a problem.

    And not only in the doorway can there be an arched vault

    In general, universal corners can be used for the arch. They are flexible, which is very convenient. There are flexible non-universal. plastic, made of a special polymer of increased elasticity.

    But in general, corners with different widths of shelves are used to decorate arches. They are even called arched. They have one shelf 10 mm (outer), the second. inner. 30 mm and more. They bend easily. Do not twist it into a donut, but it is not difficult to get any curvature of an arc. It will only be necessary to use a secure fixation while the glue dries.

    This is an arched plastic corner

    If you want to bend an ordinary corner, you can do this by heating the plastic. For this job you need a building hair dryer. Regular. for hair. will not work, since its temperature is too low. We also need a template according to which we will bend the plastic corner. Take a piece of fiberboard, screw in screws or hammer in nails, forming the profile you need.

    So you can arrange the corners of the arch with protective corners.

    How to Polish and Shape Plastic Edges

    Bending starts from the middle. You warm up the area by constantly pressing on the middle, and with a hairdryer moving from the center to the edges. So it is necessary to bring the corner to the desired curvature and leave it in this position to cool. So that it does not straighten, holes are made for the second row in parallel with a number of self-tapping screws. The distance between the rows is equal to the width of the corner shelf. After the plastic is bent, insert and slightly tighten the screws. After the plastic has cooled down, remove them.

    How to cut finishing corners

    Almost always, the corners have to be cut to protect the corners of the walls. They are sold in slats from 2 to 3 meters long. The cutting tool is selected depending on the type of material. For wood and metal, thick plastic, you need a hacksaw, but the blade is different. for wood, and with a small tooth for metal or thick-walled plastic.

    Thin plastic can be cut with a construction or office knife, sharp scissors. If you need to cut perpendicularly, it is easier to use scissors. We cut them to the corner on both sides, bend the corner, cut the remaining millimeters with a clerical knife. If there are flaws, they can be easily corrected with the same knife or sandpaper with a very fine grain (polishing).

    How to cut a protective plastic corner (PVC)

    If the plastic corner needs to be cut along the fold, we cut it along the inner corner with a clerical knife. Cutting through to the full thickness does not make sense. You just need to leave a noticeable strip. Then we fold back the piece to be removed. It comes off at the cut. Remove irregularities with a knife or sandpaper.