How to cut plastic corners on windows

What glue to use

In addition to the corners themselves, we also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, falls on the walls. As a result, the latter can be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose such an adhesive composition, the excess of which can be removed from the surface.

Basically, the corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since no decoration can hide large bumps. It should be free of foreign objects such as nails, self-tapping screws, etc. It also needs to be degreased, for this purpose white spirit is suitable.

Photo gallery: finishing materials

It can be seen that the assortment is quite extensive, and there is plenty to choose from. But what should be guided by this? Of course, no matter how we would like, but almost always the budget is limited. Therefore, first of all, we have to proceed from our financial situation. As mentioned above, plastic products have a very reasonable price, while their appearance is not much inferior to analogues made from natural materials. But, in addition to the price, you should also pay attention to the fact that these decor elements harmoniously fit into the design of the room.

For arches, you should purchase special arched corners of different sexes, they ideally retain their position when bent. Please note that the wider the sides of this element are, the more loads it can withstand.

Why do you need to fasten the corners to the slopes

Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the slopes of doors or windows with special decorative elements that fit perfectly into the design of the room, then the interior will immediately change for the better.

Corners protect slopes from damage

But besides this, they also perform a very important protective function. Sooner or later, you have to carry bulky things through the opening, which is fraught with damage to the corners, and you can simply accidentally touch the outer corner and damage it. There can be a lot of situations, most importantly, the result is the same. a damaged surface and, accordingly, a view. In addition, as practice shows, most often the wallpaper begins to flake off precisely in these places. So it is best to protect the outer corner of the slope with a decorative element that will also transform the interior.

Corners are not only protection, but also a neat aesthetic appearance

How to cut and glue corners to door and window slopes

Plastic, wooden or MDF. which ones to choose?

Making sure that the installation of corners is not just a whim, but a necessity, we will study the construction market in order to make the right choice. These products are divided into types depending on the material from which they are made. So, the corner can be plastic, wooden, bamboo, made of cork or MDF. Absolutely each type has its pros and cons, we will consider them in more detail.

Plastic corners are made by hot folding a sheet of polyvinyl chloride. Basically, they have the same shelf width. from 10 to 40 mm in 5 mm increments. However, there are asymmetric specimens, for example, 10×25 mm, but regardless of this parameter, the angle between the sides is 90 degrees. If it is necessary to transform the arched opening, then this is done by means of a special flexible profile. Their advantages can be called a relatively low cost, they do not need painting, unlike the same tree.

The next type is cork corners. Such decorative elements are quite often used for arched openings, but this does not mean at all that their use is limited only to this area. They can also be used for finishing slopes of various shapes. The cork has a number of advantages, including strength, fire resistance, practicality and environmental friendliness. In principle, this material has practically no drawbacks, except that if your pet wants to sharpen its claws on it, this will damage the surface.

It is also worth noting wooden and bamboo products, which will always be signs of excellent taste and will fit into almost any interior. In addition, we must not forget about their environmental friendliness. True, such elements are somewhat more expensive than their counterparts from other materials, and besides, they often need painting. A material such as MDF can also be compared with natural wood, only it costs significantly lower, because wood dust is used to create it.

How to cut correctly

Before discussing how to attach the corners to the slopes, you should find out how to cut them correctly. After all, this stage of everything is the most time consuming and, perhaps, even the most important, since it depends on how much their edges will join, and this directly affects the aesthetic appearance of the entire room. The best way to do this is with a fine-toothed hacksaw. First, you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Then we cut off the part that will adjoin directly to the slope strictly according to the marks, and the part that will be against the wall at an angle of 45 °.

Use a fine-toothed hacksaw to trim the corner.

Installation of corners on the slopes of a window or door

Having figured out what such products are made of, what are their features and having decided on the choice, you should study how to install the corners on the slopes. Detailed instructions are given below.

Required tools and materials

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

3 Way Mitre | How to do a three way mitre with quadrant tile trim | Easy to follow guide |

How to cut and glue corners to door and window slopes

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

How to Polish and Shape Plastic Edges

1 Why do you need to fasten the corners to the slopes

Let’s start with the most important. why is it necessary? What role do the corners play. only decorative or do they have more serious functions? Let’s not argue with the fact that if you frame the plastic corners are made by hot bending a sheet of polyvinyl chloride. Basically, they have the same shelf width. from 10 to 40 mm in 5 mm increments. However, there are asymmetric specimens, for example, 10×25 mm, but regardless of this parameter, the angle between the sides is 90 degrees. If it is necessary to transform the arched opening, then this is done by means of a special flexible profile. Their advantages can be called a relatively low cost, they do not need painting, unlike the same tree.

READ  How to Distinguish Bosch Hammer Counterfeit

The next type is cork corners. Such decorative elements are quite often used for arched openings, but this does not mean at all that their use is limited only to this area. They can also be used for finishing slopes of various shapes. The cork has a number of advantages, including strength, fire resistance, practicality and environmental friendliness. In principle, this material has practically no drawbacks, except that if your pet wants to sharpen its claws on it, this will damage the surface.

It is also worth noting wooden and bamboo products, which will always be signs of excellent taste and will fit into almost any interior. In addition, we must not forget about their environmental friendliness. True, such elements are somewhat more expensive than their counterparts from other materials, and besides, they often need painting. A material such as MDF can also be compared with natural wood, only it costs significantly lower, because wood dust is used to create it.

Photo gallery: finishing materials

It can be seen that the assortment is quite extensive, and there is plenty to choose from. But what should be guided by this? Of course, no matter how we would like, but almost always the budget is limited. Therefore, first of all, we have to proceed from our financial situation. As mentioned above, plastic products have a very reasonable price, while their appearance is not much inferior to analogues made from natural materials. But, in addition to the price, you should also pay attention to the fact that these decor elements harmoniously fit into the design of the room.

For arches, you should purchase special arched corners of different sexes, they ideally retain their position when bent. Please note that the wider the sides of this element are, the more loads it can withstand.

3 Installation of corners on the slopes of a window or door

Having figured out what such products are made of, what are their features and having decided on the choice, you should study how to install the corners on the slopes. Detailed instructions are given below.

What glue to use

In addition to the corners themselves, we also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, falls on the walls. As a result, the latter can be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose such an adhesive composition, the excess of which can be removed from the surface.

Basically, the corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since no decoration can hide large bumps. It should be free of foreign objects such as nails, self-tapping screws, etc. It also needs to be degreased, for this purpose white spirit is suitable.

How to cut correctly

Before discussing how to attach the corners to the slopes, you should find out how to cut them correctly. After all, this stage of everything is the most time consuming and, perhaps, even the most important, since it depends on how much their edges will join, and this directly affects the aesthetic appearance of the entire room. The best way to do this is with a fine-toothed hacksaw. First, you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Then we cut off the part that will adjoin directly to the slope strictly according to the marks, and the part that will be against the wall at an angle of 45 °.

Use a fine-toothed hacksaw to trim the corner.

Finally, we got to the main question, how to stick the corners on the slopes. However, before proceeding directly to fixation, you should carry out, so to speak, fitting. After making sure that everything is cut correctly, you can move on. We apply an adhesive solution on the inside of the corner, at the junction of the sides, with a step of approximately 10 cm. At this stage, an assembly gun will be an indispensable assistant. After that, quickly press the product to the surface and fix it in this position with masking tape. You should start with a horizontal slope, and then proceed to the side ones. We remove excess sealant from the surface of the walls with a damp cloth and let it dry thoroughly. You can remove the tape only after 24 hours.

we attach corners to window slopes

Thus, plastic corners can be placed on the slopes of a window or door. As you can see, there is nothing complicated in this process.

how to cut and glue corners on door slopes

Having figured out what such products are made of, what are their features and having decided on the choice, you should study how to install the corners on the slopes. Detailed instructions are given below.

Installation of plastic corners

The work on installing plastic corners on slopes is as follows:

  • Regardless of where you need to glue the plastic corners. on the door, if a casing or window is not provided, outside or inside, you need to make measurements and cut the material to length correctly.
  • Prepare the surface where gluing will take place. remove unnecessary elements, clean the base.
  • Install and glue the strips correctly.

How to properly glue plastic corners to any slopes:

  • Degrease the surface well before attaching the corner piece.
  • Polyurethane foam is not used in the design process.
  • Excess protruding plaster is smoothed out to a noticeable smoothness.

How to glue plastic corners correctly

  • The sticker provides for marking with a pencil.
  • Before you glue all the details, you should use the advice: it is better to measure the corners for the slopes of doors and plastic windows locally. Place the top horizontal element first, and then use the cutting tool to mark the vertical stripes.

Important! Using photos and videos, each beginner will cope with the gluing process on their own. The metal element is also fixed with self-tapping screws.

Sheathing with corners also implies additional fastening of the strips using narrow masking tape. Fix the strip with it in several places and leave it for about 24 hours. This time is enough to reliably glue the corners to the surface.

If the corner is used as a finish, then the place of its gluing should be cleaned of finishing materials. Thus, the grip quality is increased. When fixing on an area decorated with trellises, a strip should be cut a couple of millimeters wide than the plastic corners. Adhering to simple design rules, fixing decorative elements will be simple and quick, and in the end they will delight you with an aesthetic and relaxed look.

Required tools and materials

When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

How to glue plastic corners to slopes

Scope of use and additional information

The framing corner is made by hot folding the PVC sheet. The decorative element makes it possible to choose colors that suit any interior. Application area:

plastic, corners, windows
  • Window slope inside a house or apartment.
  • As an external material to protect external or internal corners.
  • Door or arched opening.
  • To protect the corner of the wall when wallpapering.
  • Corner protection when finishing with plastic in the bathroom.
  • Draping of the joint when decorating the external cladding with siding.

A plastic element is a good protector against mechanical stress, but, like any material, it has advantages and disadvantages:

  • The installed corner is used as a finishing of the seam at the junction of finishing materials.
  • Long service life. up to 25 years.
  • Installation is carried out independently, you can glue the corner without preliminary preparation.
  • The plastic element is easy to cut and comes in a variety of colors.
  • Acceptable price.

Why do we need plastic corners on slopes

Among the shortcomings, the following were significant:

  • Plastic is a fragile material, so it must be cut with special tools. cracks may appear.
  • Flammable finishing element does not tolerate high temperatures.

Plastic, wooden or MDF. which ones to choose?

Making sure that the installation of corners is not just a whim, but a necessity, we will study the construction market in order to make the right choice. These products are divided into types depending on the material from which they are made. So, the corner can be plastic, wooden, bamboo, made of cork or MDF. Absolutely each type has its pros and cons, we will consider them in more detail.

READ  How to properly cut a biscuit into cakes

Plastic corners are made by hot folding a sheet of polyvinyl chloride. Basically, they have the same shelf width. from 10 to 40 mm in 5 mm increments. However, there are asymmetric specimens, for example, 10×25 mm, but regardless of this parameter, the angle between the sides is 90 degrees. If it is necessary to transform the arched opening, then this is done by means of a special flexible profile. Their advantages can be called a relatively low cost, they do not need painting, unlike the same tree.

The next type is cork corners. Such decorative elements are quite often used for arched openings, but this does not mean at all that their use is limited only to this area. They can also be used for finishing slopes of various shapes. The cork has a number of advantages, including strength, fire resistance, practicality and environmental friendliness. In principle, this material has practically no drawbacks, except that if your pet wants to sharpen its claws on it, this will damage the surface.

It is also worth noting wooden and bamboo products, which will always be signs of excellent taste and will fit into almost any interior. In addition, we must not forget about their environmental friendliness. True, such elements are somewhat more expensive than their counterparts from other materials, and besides, they often need painting. A material such as MDF can also be compared with natural wood, only it costs significantly lower, because wood dust is used to create it.

How to cut correctly

Before discussing how to attach the corners to the slopes, you should find out how to cut them correctly. After all, this stage of everything is the most time consuming and, perhaps, even the most important, since it depends on how much their edges will join, and this directly affects the aesthetic appearance of the entire room. The best way to do this is with a fine-toothed hacksaw. First, you need to measure the length of the opening, then we put marks on the corner itself so that the segment corresponds to this parameter. Then we cut off the part that will adjoin directly to the slope strictly according to the marks, and the part that will be against the wall at an angle of 45 °.

Use a fine-toothed hacksaw to trim the corner.

What glue to use

In addition to the corners themselves, we also need an adhesive composition with which we will fix the selected element. When choosing it, it is worth remembering that quite often, especially if it is necessary to glue a narrow product, the glue seeps out from under it and, naturally, falls on the walls. As a result, the latter can be damaged, which, accordingly, will negatively affect the appearance of the room as a whole. Therefore, you should choose such an adhesive composition, the excess of which can be removed from the surface.

Basically, the corners are glued to new slopes, but nevertheless, check that the surface is relatively flat, since no decoration can hide large bumps. It should be free of foreign objects such as nails, self-tapping screws, etc. It also needs to be degreased, for this purpose white spirit is suitable.

The Complete Guide to Framing Corners

  • Categories
  • Automotive industry
  • Practical building instructions
  • Basement
  • Cupboard
  • Countertops
  • Decks
  • Demolition
  • Doors
  • Drywall
  • Drywall Joinery
  • Installation of floors
  • Framing
  • Furniture
  • Gutters
  • Lighting
  • Molding
  • Plumbing. Directory
  • Water heaters
  • Roofs and gazebos
  • 000
  • 000
  • 00030006 Roofs and gazebos
  • Spiral staircases
  • Stone and concrete
  • Joinery
  • Waterproofing
  • Decks
  • Decorating
  • DIY projects
  • Decks
  • Floors

    css. How to make an image with cut corners?

    Plastic (PVC) corners are very widely used in interior decoration, they are installed on the slopes of plastic windows, they frame the outer corners of the walls and the slopes of doorways. In this article, we will take a closer look at the process of installing a PVC corner on the slope of a plastic window, and also consider how to make a neat joint between two corners.

    Step 1. Making the markup. We need to attach a PVC corner to the slope and make a mark along the edge of the vertical slope:

    The minimum length of the applied angle (L) must be greater than the height of the slope (a) by the width of the angle (b), taking into account a small margin (c):

    For example, if the height of the slope is a = 1500 mm, and the width of the corner is b = 30 mm, then the length of the corner must be at least a b c = 1500 30 15 = 1545 mm.

    Step 2. Make a cutout on the PVC corner, removing one edge, as shown in the photo below:

    We apply a corner to the slope:

    The corner fits perfectly, you can proceed to the next step.

    Step 3. The plastic corner is glued only to the slope, this is enough for fixing, so we apply glue only to one of the edges.

    “How to glue the PVC corner?”

    As glue, you can use “Moment Montage”, “QUELYD Masterfix” and their analogues. It is not recommended to use super glue, as it will be almost impossible to correct mistakes.

    Glue is applied to the inner surface of the corner in a dotted manner or in a thin strip:

    We fix the PVC corner with masking tape (while the glue dries):

    Step 4. Repeat step 1-3 for the right slope:

    Step 5. We mount the corner on a horizontal slope. The length of the corner is taken with the same margin as for the vertical one, but taking into account both sides. Marking is also performed, and then cutouts are made and the corner is glued to the slope:

    Step 6. Mark the place of the cut. The corners will mate at a 45 ° angle:

    Step 7. Carefully cut two corners at once. It is very important that the knife is sharp:

    Step 8. Cover the joint between the corners with white acrylic sealant. After the glue dries, remove the masking tape. Installation of PVC corner is completed.

    Preparation phase

    Before starting work, you need to prepare the surface and the corner itself. First of all, you need to clean the surface of the walls. They remove dirt, dust, sawdust and other construction waste. If necessary, rinse and dry so that not a drop of moisture remains on the surface.

    The corner itself also requires preparation. The plastic is degreased with a solvent or white spirit, cleaned of dirt and wiped dry. What if the curvature angle of the surface does not match the shape of the corner? Plastic can be straightened by heating it with a construction hairdryer.

    Preparatory work

    Before you start decorating the walls with plastic corners, you should clean the work surface from dirt, dust and other construction debris. For glue application, purchase a glue gun, and for installation. additionally the following tools:

    • scissors or a hacksaw for metal;
    • square (preferably metal);
    • stationery knife;
    • roulette;
    • masking tape.

    You may also need a miter box, with which workpieces are made with an angle of 45 °. But if the tool is missing, you can cope without it, using certain skills and our recommendations.

    Degrease the attachment point of the corner and the part itself with a weak solvent or white spirit. The workpiece must be clean. Eliminate moisture ingress.

    How to glue plastic corners to slopes

    Required tools and materials

    When the doors and windows are installed, it is necessary to deal with the finishing of the slopes, as a rule, this is the final stage. To hide small roughness and give a complete aesthetic look, many use ready-made corners. How to properly cut and glue a corner made of plastic, cork or MDF? Below are detailed recommendations for their installation.

    How to glue a plastic corner on the door and window slope

    Before you put the corners on the slopes of windows or doors, you need to check the quality of the surface finish. This is done using a level, plank, or rigid ruler. If the surface of the slope is strongly curved, and this cannot be fixed, then it is better to install flexible plastic corners here.

    Slopes are of three types:

    • plasterboard;
    • pasted over with wallpaper;
    • painted after plastering.
    plastic, corners, windows

    Regardless of the choice, the installation technology is the same in each case. Only the choice of adhesive is important so that it fits both the plastic and the finishing surface.

    • Measure the height to make the blanks. Leave a margin at the top. The cuts are made with metal scissors. You will get an angle of 90 ° from the inside, and 45 ° from the outside.
    • Put the part on the glue and wait for the setting.

    How to Cut Tile Trim – Metal and Plastic

    Press the corner firmly

    • Now measure the width, and cut to the required size with a margin to make the pairing with the side planks.
    • The face piece is cut at an angle of 45 ° at both ends.
    • Try on the corner to the side slopes to make marks in place with a cutting knife.
    • Take a ruler, attach it to the glued part and cut off the excess.
    • Now apply glue to the top bar and attach it to the corner. Secure all elements with tape for a day.
    READ  How to Cut Baguettes for Docking in the Corners

    An example of securing corners with tape

    If the slopes are finished with wallpaper with a volumetric relief, then strips must first be cut out on them for plastic corners. Be careful that no drops remain on their surface after glue or liquid nails.

    Scope of use and additional information

    The framing corner is made by hot folding the PVC sheet. The decorative element makes it possible to choose colors that suit any interior. Application area:

    • Window slope inside a house or apartment.
    • As an external material to protect external or internal corners.
    • Door or arched opening.
    • To protect the corner of the wall when wallpapering.
    • Corner protection when finishing with plastic in the bathroom.
    • Draping of the joint when decorating the external cladding with siding.

    A plastic element is a good protector against mechanical stress, but, like any material, it has advantages and disadvantages:

    • The installed corner is used as a finishing of the seam at the junction of finishing materials.
    • Long service life. up to 25 years.
    • Installation is carried out independently, you can glue the corner without preliminary preparation.
    • The plastic element is easy to cut and comes in a variety of colors.
    • Acceptable price.

    Why do we need plastic corners on slopes

    Among the shortcomings, the following were significant:

    • Plastic is a fragile material, so it must be cut with special tools. cracks may appear.
    • Flammable finishing element does not tolerate high temperatures.

    Complain about the video?

    How to properly glue the corners to the slopes: step by step instructions

    It is necessary to glue plastic corners at temperatures above 15 degrees with closed doors and windows.

    Instructions:

    • Prepare surfaces: level, clean, dust, degrease if possible. If textured wallpaper is pasted on the wall, it is better to cut off a thin strip with a clerical knife for better adhesion of the glue.
    • Take a corner and attach it to the top of the opening. Make marks on the inside. Measure the shelf width. Add the resulting number to one side and the other of the serifs. Draw a diagonal between the serifs. The angle will be 45 °. Cut the inside of the corner at 90 °.
    • In the same way, measure and cut the corners to the side parts of the opening.
    • Apply glue to the center of the corner in a continuous line or zigzag pattern. Don’t feel sorry for him, but don’t overdo it either. The glue should fill the entire inner space of the corner, but at the same time not protrude along the edges after installation on a slope.
    • Install the corner on the slope. Please note that some types of glue must achieve the desired viscosity in air. In this case, the corner is attached to the wall 3-5 minutes after applying the composition. Read the instructions carefully.
    • Press down on the part with your hand or install supports.
    • If excess glue has come out around the edges of the plastic, remove it. Try not to smear the glue on the surface. Traces can be removed with a solvent.
    • Hold the corner under pressure for as long as it is written in the instructions.

    Installation options for corners on walls

    How to make a slope? Installation methods:

    Suitable for non-embossed, plain wallpaper. Deep embossing creates gaps that fill with dust, weakening the bond between the corner and the wall.

    It means cutting out a part of the wallpaper on the slope, applying glue to the wall surface. “Detailed” is called because it looks like a whole composition, but it is an assembly of parts. pieces of wallpaper, a corner, glue.

    Detailed installation plan:

    • The corner is applied in place, marked with drawing tools.
    • A strip of wallpaper is cut according to the marks. Clears the wall at the slope site.
    • Apply glue to a cut plastic workpiece, press it against the slope, hold it until the composition sets. Pressed with duct tape against the wall for a day.
    • At the end of the day, the tape is removed, the installation is considered completed.

    Plastic corners for slopes: step by step installation instructions

    The framing corner is made by hot folding the PVC sheet. The decorative element makes it possible to choose colors that suit any interior. Application area:

    • Window slope inside a house or apartment.
    • As an external material to protect external or internal corners.
    • Door or arched opening.
    • To protect the corner of the wall when wallpapering.
    • Corner protection when finishing with plastic in the bathroom.
    • Draping of the joint when decorating the external cladding with siding.

    A plastic element is a good protector against mechanical stress, but, like any material, it has advantages and disadvantages:

    • The installed corner is used as a finishing of the seam at the junction of finishing materials.
    • Long service life. up to 25 years.
    • Installation is carried out independently, you can glue the corner without preliminary preparation.
    • The plastic element is easy to cut and comes in a variety of colors.
    • Acceptable price.

    Why do we need plastic corners on slopes

    Among the shortcomings, the following were significant:

    • Plastic is a fragile material, so it must be cut with special tools. cracks may appear.
    • Flammable finishing element does not tolerate high temperatures.

    Mounting options

    To design a window opening, the following installation methods can be used:

    • Gluing the corner on the wallpaper. suitable only for simple wallpapers with a smooth relief, with deep embossing, the adhesion to the wall will be weak.
    • The profile is attached to the wall, free of wallpaper. To do this, you need to put it to the installation site, align it, press it against the wall. Use a sharp knife to cut off the strips of wallpaper under the overlay. You can mark it up with a pencil, and then cut it off. Smear the inner surfaces of the corner with “liquid” nails or other glue, and stick to the slope. Secure with tape, leave to dry for a day.

    Types of protective corners: from what materials

    According to the area of ​​application, the corners are for external (outdoors) and internal use. For now, let’s talk about how to protect corners in an apartment and a house. indoors. Let’s start with the materials. The corners to protect the corners of the walls can be:

    • Made of plastic (PVC). Different colors, textures, there are even transparent.
    • Made of metal. Brass, aluminum (polished and not), stainless steel, painted and unpainted.
    • Wooden. Made of different types of wood, smooth, with a relief.

    The corner on the arch is pasted over with a flexible plastic corner

    Cork corners for corner protection

    Advantages and disadvantages

    A plastic sloping corner, like any material, has its pros and cons, let’s talk about them in more detail.

    First, about the advantages of the products:

    • allow you to close the corner joints of various materials;
    • smooth out irregularities and form an angle of 90 ° at the finishing points;
    • service life is 20-25 years;
    • easy to process during installation;
    • you can choose the desired color (corners are produced not only white, but also colored)
    • reasonable price, which favorably distinguishes PVC corners against the background of wooden and metal products.

    You may be interested in learning how to make plastic slopes for windows with your own hands. Read the details here.

    Minuses:

    • weak mechanical strength. when cutting, the material may crack in the cutting area, products are easily scratched;
    • flammability, heated and burning plastic gives off corrosive smoke and gas.

    Various types of products

    There are different types of corners, which are divided according to their size and scope. There are the following varieties:

    • Standard. They differ in the same size of the sides. Used to give strength to slopes. There are two main sizes: 22 and 55 cm.
    • Non-standard. Their sides are asymmetrical. They are used for work with slopes, which are installed on curved or arched openings. The most common size: 1020 mm.
    • F or T. shaped. Hides the spaces that are created when slopes and wall material dock.
    • On the latch. They are characterized by a removable design, which allows work to be carried out much faster.

    Types of plastic corners

    What you need to work?

    So, the plastic corner has been purchased, you need to attach it to the joints. What else do you need to do it yourself? List of required tools and materials:

    • glue. polyurethane, silicone;
    • scissors. it is better to take scissors for metal, a regular tool will not cope well with plastic;
    • hacksaw or grinder;
    • painting knife;
    • masking tape;
    • tape measure and square;
    • pencil.