How To Cut The Blinds To Length

Shorten the blinds

When starting the shortening procedure, it should be borne in mind that there are several types of blinds: vertical or horizontal, and also that reducing the size of this product has its own characteristics.

Shorten vertical blinds

Before shortening the vertical blinds, consider their design.

This product consists of several elements:

• Carrying and decorative cornice;
• Runners, to which the canvases are suspended;
• Bottom connecting chain;
• Weights to create weight for canvases
• Chain or control cord, slats.

Canvases can be made from fabric, plastic, aluminum or bamboo. For how to shorten the blinds, see this:

In order to shorten vertical blinds, simple tools are needed:

• A hacksaw for metal or a saw with fine teeth;
• Crosshead screwdriver;
• Scissors or paint knife;
• Roulette and ruler;
• Matches or lighter;
• Iron;
• Pencil.

How to cut blinds to size

When buying blinds for windows, they often face a problem when their dimensions do not match the dimensions of the windows. Such cases are possible with non-standard proportions of windows or when the width or length of the blinds with the pattern you like may NOT match the size of your window. In this regard, the question arises of how to shorten the blinds in height on their own and how difficult is it to accomplish? It is not difficult to shorten them, but you will need to follow the instructions, I apply maximum attention and accuracy.

Shorten horizontal blinds

Consider how to shorten horizontal blinds and what it takes.

Horizontal products differ somewhat in design, but, like the vertical type, they include the following elements:

• Brackets for wall mounting;
• Common cornice;
• Cloths or slats;
• Lifting mechanism;
• Handle for turning;
• Cord for vertical movement.

To shorten the blinds, you first need scissors.

Lamellas can be made of aluminum, plastic or wood. In order to reduce horizontal blinds in length, from the tools you will first need scissors.

Before starting work, measuring the required length of the panel. The plugs on the lower bar are opened, then it is necessary to untie the knots on the restrictive rope and remove the clips.

We make the shortening: Remove the extra lamellas, then put on the clamps, tie the knots.

We remove the extra slats, put on the clamps, tie the knots

Reducing the length of the lifting cords. Now you can put the bottom bar back in place.

The height is shortened according to these instructions.

To reduce the width, remove the side eaves cover. Saw off the cornice to the required size with a hacksaw and return the lid to its place.

General sequence of work

The process of shortening vertical blinds includes the following steps:

• It is necessary to spread the finished product on the floor and start work from the top and from the side where the lifting mechanism is located.
• Remove the side cover by prying it gently with a knife, and unscrew the fixing screws.
• Dismantle with a runner from the cornice and from the canvases. The runners are made of plastic, therefore, when handling them, you need to be very careful and NOT make any significant effort.

We measure the length of the curtains and determine how much you need to cut them, the distance from the bottom edge to the floor should be at least 1-2 cm.

Cutting all the panels to the required length with scissors or a painting knife, while leaving a certain length for tucking, as a rule, it is 2-3 cm.In order that the cut of a curtain made of synthetic fabric does NOT fray, it can be melted on fire with matches or lighters.

Tuck the edges of the panels. Folds in synthetic fabric can be fixed with iron or glue. In the middle of the canvases, it is necessary to make holes for the ears. A bar is attached to each canvas, then all components are attached to the cornice.

If it is necessary to reduce the width of the blinds, this can be done when the side cover of the cornice is removed. The cornice strip can be shortened, if necessary, by sawing off with a hacksaw and installing the elements in the opposite direction.

In order to shorten the panels made of aluminum, plastic or bamboo and NOT spoil them, you need to contact a specialist. For the features of shortening vertical blinds, see this:

You can do it yourself to reduce the length and width of horizontal products. To do this, the suspensions are removed, the cornice and panels are sawed off to the required size, and then everything is assembled in the reverse order.

Height

You can shorten the standard horizontal blinds both in height and in width, if you know a few simple tricks. If you want to shorten the blinds in height, you, first of all, need to pull out the control cord from the lower bar, removed the two plugs securing it. Mark the level to which you intend to shorten the blinds, and remove the ladders, the thin connecting rope, from all the slats to the level you indicated. Then pull out the first lamella from the mount, which is below the mark and insert the lower bar in its place. The remaining planks are cut off together with the ropes of the control cord and fastening the bottom plugs.

How to shorten horizontal blinds

By length (height)

The standard distance from the slats to the floor is considered to be up to 20 millimeters, and in order to raise them higher, you will have to resort to shortening them. This activity is NOT too difficult, but requires perseverance and knowledge of the process. Pull out the slats from the sliders, and then from the lower plastic strip that secures them. Gently tuck the edges to the distance you need, cut with great care and be sure to process the edges to shorten the blinds. Any fabric is well fixed with fire, so it is better to burn the fabric vertical slats with a lighter or a match. Insert the lower plank back. and enjoy the change in the design of the room with your own hands.

By width

To shorten the horizontal blinds in width, you will need more accessories and tools: a hacksaw with fine teeth, a file and sandpaper. You need to start from the same thing. remove the lower bar from the eaves, pull out the plugs and protective covers from it. Then fold the slats in an even pile and fasten them with an elastic band so that they do not creep, interfering with the lesson. For fixing, you can use adhesive tape or electrical tape, but at the same time be prepared for the subsequent wiping of the remnants of the adhesive layer from the surfaces of the lamellas. Next, you need to saw off the extra width for you along the previously marked marks with a hacksaw and eliminate irregularities and roughness with a file or sandpaper. Next, the final stage before assembly is painting the cuts. Reducing the width in this way will only work for the holes in the lamellas intended for the cord. Or you have to use a drill to drill new.

How to shorten vertical blinds

By width

Usually there is no need to shorten the vertical blinds in width, because, even speaking a few centimeters, they look quite nice and neat. But, if you really want to, there will still be NO serious problems with this. The main task is to shorten the cornice and the stem, at the end of which the club with petals is fixed. Ideally measure the area where you will be sawing, cut off the aluminum rod itself. the base of the eaves. and sand the cut edges with sandpaper or a file. After that, it remains to shorten the chain of vertical blinds and get rid of unnecessary slats.

How to shorten blinds in height (length) or width. Is it possible to shorten the blinds?

From the above, we conclude that it is possible to shorten the blinds at home, but subject to preparation and availability of the necessary good components. Company “Master suite” has long been rooted in Ukraine as one of the best manufacturers of components and firmly defends its position. Any details for shortening horizontal or vertical blinds can be purchased from “Master suite”!

Height

You can shorten the standard horizontal blinds both in height and in width, if you know a few simple tricks. If you want to shorten the blinds in height, you, first of all, need to pull out the control cord from the lower bar, removed the two plugs securing it. Mark the level to which you intend to shorten the blinds, and remove the ladders, the thin connecting rope, from all the slats to the level you indicated. Then pull out the first lamella from the mount, which is below the mark and insert the lower bar in its place. The remaining planks are cut off together with the ropes of the control cord and fastening the bottom plugs.

How to shorten horizontal blinds

By length (height)

The standard distance from the slats to the floor is considered to be up to 20 millimeters, and in order to raise them higher, you will have to resort to shortening them. This activity is NOT too difficult, but requires perseverance and knowledge of the process. Pull out the slats from the sliders, and then from the lower plastic strip that secures them. Gently tuck the edges to the distance you need, cut with great care and be sure to process the edges to shorten the blinds. Any fabric is well fixed with fire, so it is better to burn the fabric vertical slats with a lighter or a match. Insert the lower plank back. and enjoy the change in the design of the room with your own hands.

By width

To shorten the horizontal blinds in width, you will need more accessories and tools: a hacksaw with fine teeth, a file and sandpaper. You need to start from the same thing. remove the lower bar from the eaves, pull out the plugs and protective covers from it. Then fold the slats in an even pile and fasten them with an elastic band so that they do not creep, interfering with the lesson. For fixing, you can use adhesive tape or electrical tape, but at the same time be prepared for the subsequent wiping of the remnants of the adhesive layer from the surfaces of the lamellas. Next, you need to saw off the extra width for you along the previously marked marks with a hacksaw and eliminate irregularities and roughness with a file or sandpaper. Next, the final stage before assembly is painting the cuts. Reducing the width in this way will only work for the holes in the lamellas intended for the cord. Or you have to use a drill to drill new.

How to shorten vertical blinds

By width

Usually there is no need to shorten the vertical blinds in width, because, even speaking a few centimeters, they look quite nice and neat. But, if you really want to, there will still be NO serious problems with this. The main task is to shorten the cornice and the stem, at the end of which the club with petals is fixed. Ideally measure the area where you will be sawing, cut off the aluminum rod itself. the base of the eaves. and sand the cut edges with sandpaper or a file. After that, it remains to shorten the chain of vertical blinds and get rid of unnecessary slats.

How to shorten blinds in height (length) or width. Is it possible to shorten the blinds?

From the above, we conclude that it is possible to shorten the blinds at home, but subject to preparation and availability of the necessary good components. Company “Master suite” has long been rooted in Ukraine as one of the best manufacturers of components and firmly defends its position. Any details for shortening horizontal or vertical blinds can be purchased from “Master suite”!

Horizontal

Despite the significant visual differences, horizontal blinds are similar to vertical components:

• Lifting mechanism;
• Swivel handle;
• Lamellas or cloth;
• Cord for vertical shift of curtains;
• Common cornice;
• Mounting brackets.

The lamella material is wood, plastic or aluminum. The horizontal blinds are shortened in height with scissors and a lighter or matches. This is required to cut the cord and strands of the ladder, cauterizing their ends in order to maintain integrity. Welded ends are easier to thread through holes in lamellas.

Instructions for shortening horizontal curtains:

• Measure the length of the blinds, mark the wall. You can use masking tape or other harmless materials for finishing materials that adhere to the surface.
• There are a pair of plastic plugs on the bottom of the final curtain strip. They must be removed, pulled out a little from the structure, so that the control thread can be cut. Here, after this operation, you need to cauterize the ends of the artificial cords so that they DO NOT unravel.
• To remove the interfering strips, you must first get the control cord 1 lamella higher from the mark on the wall. Then cut from 1 to the last “extra” planks after the gap formed. Remains about 2 flights of ladder.
• The lower bar with the adjacent lamella is removed, threaded into the left empty space in the main structure.
• The control cord is passed through all holes of THESE slats and strips in reverse order. At the ends of the cord, plastic clips are again put on, which are attached to the grooves on the bar. But before that you need to tuck the protruding ends of the rope ladder.

For this you need:

• Remove the plug from one side of the eaves.
• Remove all elements of the blinds or move them away from the cutting point.
• Measure the desired width of the product. Using a hacksaw for metal or wood (which the cornice consists of) perform an even vertical spray.
• Horizontal curtains are also shortened according to the width of the slats, and in each of them new holes are made at the required distance from the edge for the control cord.

In the case of vertical ones, a few extra lamellas are removed. Shortening the width of rolled products requires cutting the entire panel and weighting strips, finishing the outer edge.

All parts of the curtains are installed in their original place.

A plastic plug is put on.

If we are talking about an expensive product, then it is better NOT to take risks and take the blinds to professionals.

We suggest looking at how to shorten horizontal blinds yourself:

Vertical

Vertical structures contain the following set of parts and elements:

• Chains for lamellae and control cord, lower lamella connection;
• Weights or weighting materials, with the help of which the web of the vertical bar is pulled;
• Runners, to Which individual canvases of the structure are fixed;
• Decorative and bearing cornice.

You will need the following set of tools to shorten the height of vertical curtains:

• Painting knife or scissors;
• Roulette or ruler, pencil;
• Iron for cauterization of the lower cut off part of the product;
• Lighter or matches to form a tight end of the cut cord;
• Phillips screwdriver;
• Fine-toothed saw or hacksaw for working with metal.

Vertical blinds can be shortened in both directions: in width or in height. In the first case, you will need to trim the cornice to the required size, and in the second. each individual canvas, so the process is more time consuming than when working in horizontal counterparts.

Instructions for shortening vertical curtains:

• The dimensions of the window opening are removed, including the level of fastening of the cornice, taking into account the method of its installation. If the curtains must be to the floor, then 2 cm must be excluded from the measurements, which must be left from the floor to the curtains.
• In the case of removing the length of the blades, shortening the eaves is NOT required. Since the lower part of the lamellas has a more complex design, including s for weights, overlays for connecting with plastic chains, therefore, they are cut to the desired height from the upper part.
• Leaving a small margin for the lapels, each lamella is cut to the desired length. Remove the plastic tab from the cut area. To preserve the integrity of the canvas, process the edges with a lighter or a hot iron through a newspaper so that the material does not stick to the sole of the appliance.
• To thread the bent fabric under the lapel, you need to make a hole in the central part of the canvas, into which you drive the eyelet. For gluing the edges of the strip, strong fixation adhesives of the “Moment” type are used.

The described actions are given for one lamella. It is necessary to shorten each element of the blind structure by the same length.

To reduce the vertical curtains in width, the greatest difficulty will arise with the cornice. For this you need:

• The aluminum cord and rod are removed from the inside of the cornice. The stem washer must be intact, so the cut on this element is made 2-3 cm further. To accidentally cross-section wires, it is not worth cutting it completely.
• The rod is removed from the cornice, after processing with a file, the separated edge is pushed through the washer.
• At the desired point, the curtain itself is cut off according to preliminary measurements with the rod already installed back.
• So that the trimmed parts of the structure do NOT damage other elements, they need to be cleaned with a file. Extra hooks are removed from the cornice. Since these parts are pierced with a control cord, you need to cut it with nippers.
• The washer on the end part of the curtain is placed figuratively on the structure, followed by shortening the lace. It is necessary to Unscrew the cap fixing it with a screwdriver, cut the rope to the required length with scissors, assemble the eaves structure in the reverse order.

How to reduce in height (length) or width?

Before the procedure, it is necessary to prepare the necessary tools, which depend on the type of curtains, the direction of fit:

The easiest way is to reduce the length of the horizontal blinds when the width matches the window. It is enough to disassemble the structure from below in a certain order, remove the extra slats, and then fix the lower bar again (read how to make and install horizontal blinds here).

If horizontal blinds are chosen, then preference should be given to the coincidence of the width, rather than the length, since shortening this type of blind is easier than cutting metal or wooden slats.

In the case of vertical blinds, you need to try to guess with the length (for details on how to assemble and hang vertical blinds, read here). It is easier to remove a few side elements than to trim all the lamellas in height. In roller blinds, shortening is allowed in different directions, but the work is a little more difficult, since some materials require processing the edges of the fabric. Most often, overlocking or patching with a thin finishing tape is used (you can find out more about the types, installation methods and cleaning of roller blinds here).

Is it possible?

If the blinds are made of metal or wooden slats, then working with them is more difficult than with fabric or paper counterparts. Then the use of a more complex tool and material processing skills will be required.

Most often, a change in the length of the curtains is required, since factory products are not always sold, the dimensions of which correspond to real windows after repair in an apartment or house (read about the rules for choosing and installing blinds on plastic windows here).

Detailed step-by-step instructions on how to shorten blinds in length and width

The need to change the size and shape of the blinds appears in different situations: due to the replacement of windows, finishing the window opening, changing the shape of the slopes, etc. Is it possible to cut the blinds in width and length on your own, how to shorten the cornice? In some cases, it is necessary to contact the craftsmen so as not to damage the structure. This article describes in detail how to properly shorten the blinds yourself.

DIY shortening

When shortening the blinds, you must adhere to the rule:

• Perform all actions very carefully, since most of the elements are very fragile, they can be damaged.
• Make sure that the horizontal slats do not bend, since it is very difficult to straighten them, and the wooden planks will need to be completely replaced.
• Burn all ends of the cut fabric or cord with a flame or a hot iron, in the second case, use a newspaper so that the melted synthetic materials DO NOT stick to hot metal.
• It is necessary to assemble / disassemble the structure in a certain order so as not to damage or confuse the elements.
• Use whichever tool is suitable for the specific material.

If you adhere to all the rules outlined, then you can efficiently shorten both vertical and horizontal curtains.

Shortening any type of blind in height or width requires skill. But it is easy to complete all the actions if you follow the instructions given. It is important NOT to use force, as the structural parts of such curtains are very fragile and can break.

Vertical

Vertical structures contain the following set of parts and elements:

• Chains for lamellae and control cord, lower lamella connection;
• Weights or weighting materials, with the help of which the web of the vertical bar is pulled;
• Runners, to Which individual canvases of the structure are fixed;
• Decorative and bearing cornice.

You will need the following set of tools to shorten the height of vertical curtains:

• Painting knife or scissors;
• Roulette or ruler, pencil;
• Iron for cauterization of the lower cut off part of the product;
• Lighter or matches to form a tight end of the cut cord;
• Phillips screwdriver;
• Fine-toothed saw or hacksaw for working with metal.

Vertical blinds can be shortened in both directions: in width or in height. In the first case, you will need to trim the cornice to the required size, and in the second. each individual canvas, so the process is more time consuming than when working in horizontal counterparts.

Instructions for shortening vertical curtains:

• The dimensions of the window opening are removed, including the level of fastening of the cornice, taking into account the method of its installation. If the curtains must be to the floor, then 2 cm must be excluded from the measurements, which must be left from the floor to the curtains.
• In the case of removing the length of the blades, shortening the eaves is NOT required. Since the lower part of the lamellas has a more complex design, including s for weights, overlays for connecting with plastic chains, therefore, they are cut to the desired height from the upper part.
• Leaving a small margin for the lapels, each lamella is cut to the desired length. Remove the plastic tab from the cut area. To preserve the integrity of the canvas, process the edges with a lighter or a hot iron through a newspaper so that the material does not stick to the sole of the appliance.
• To thread the bent fabric under the lapel, you need to make a hole in the central part of the canvas, into which you drive the eyelet. For gluing the edges of the strip, strong fixation adhesives of the “Moment” type are used.

The described actions are given for one lamella. It is necessary to shorten each element of the blind structure by the same length.

To reduce the vertical curtains in width, the greatest difficulty will arise with the cornice. For this you need:

• The aluminum cord and rod are removed from the inside of the cornice. The stem washer must be intact, so the cut on this element is made 2-3 cm further. To accidentally cross-section wires, it is not worth cutting it completely.
• The rod is removed from the cornice, after processing with a file, the separated edge is pushed through the washer.
• At the desired point, the curtain itself is cut off according to preliminary measurements with the rod already installed back.
• So that the trimmed parts of the structure do NOT damage other elements, they need to be cleaned with a file. Extra hooks are removed from the cornice. Since these parts are pierced with a control cord, you need to cut it with nippers.
• The washer on the end part of the curtain is placed figuratively on the structure, followed by shortening the lace. It is necessary to Unscrew the cap fixing it with a screwdriver, cut the rope to the required length with scissors, assemble the eaves structure in the reverse order.

Detailed step-by-step instructions on how to shorten blinds in length and width

The need to change the size and shape of the blinds appears in different situations: due to the replacement of windows, finishing the window opening, changing the shape of the slopes, etc. Is it possible to cut the blinds in width and length on your own, how to shorten the cornice? In some cases, it is necessary to contact the craftsmen so as not to damage the structure. This article describes in detail how to properly shorten the blinds yourself.

How to reduce in height (length) or width?

Before the procedure, it is necessary to prepare the necessary tools, which depend on the type of curtains, the direction of fit:

The easiest way is to reduce the length of the horizontal blinds when the width matches the window. It is enough to disassemble the structure from below in a certain order, remove the extra slats, and then fix the lower bar again (read how to make and install horizontal blinds here).

If horizontal blinds are chosen, then preference should be given to the coincidence of the width, rather than the length, since shortening this type of blind is easier than cutting metal or wooden slats.

In the case of vertical blinds, you need to try to guess with the length (for details on how to assemble and hang vertical blinds, read here). It is easier to remove a few side elements than to trim all the lamellas in height. In roller blinds, shortening is allowed in different directions, but the work is a little more difficult, since some materials require processing the edges of the fabric. Most often, overlocking or patching with a thin finishing tape is used (you can find out more about the types, installation methods and cleaning of roller blinds here).

Is it possible?

If the blinds are made of metal or wooden slats, then working with them is more difficult than with fabric or paper counterparts. Then the use of a more complex tool and material processing skills will be required.

Most often, a change in the length of the curtains is required, since factory products are not always sold, the dimensions of which correspond to real windows after repair in an apartment or house (read about the rules for choosing and installing blinds on plastic windows here).

Horizontal

Despite the significant visual differences, horizontal blinds are similar to vertical components:

• Lifting mechanism;
• Swivel handle;
• Lamellas or cloth;
• Cord for vertical shift of curtains;
• Common cornice;
• Mounting brackets.

The lamella material is wood, plastic or aluminum. The horizontal blinds are shortened in height with scissors and a lighter or matches. This is required to cut the cord and strands of the ladder, cauterizing their ends in order to maintain integrity. Welded ends are easier to thread through holes in lamellas.

Instructions for shortening horizontal curtains:

• Measure the length of the blinds, mark the wall. You can use masking tape or other harmless materials for finishing materials that adhere to the surface.
• There are a pair of plastic plugs on the bottom of the final curtain strip. They must be removed, pulled out a little from the structure, so that the control thread can be cut. Here, after this operation, you need to cauterize the ends of the artificial cords so that they DO NOT unravel.
• To remove the interfering strips, you must first get the control cord 1 lamella higher from the mark on the wall. Then cut from 1 to the last “extra” planks after the gap formed. Remains about 2 flights of ladder.
• The lower bar with the adjacent lamella is removed, threaded into the left empty space in the main structure.
• The control cord is passed through all holes of THESE slats and strips in reverse order. At the ends of the cord, plastic clips are again put on, which are attached to the grooves on the bar. But before that you need to tuck the protruding ends of the rope ladder.

For this you need:

• Remove the plug from one side of the eaves.
• Remove all elements of the blinds or move them away from the cutting point.
• Measure the desired width of the product. Using a hacksaw for metal or wood (which the cornice consists of) perform an even vertical spray.
• Horizontal curtains are also shortened according to the width of the slats, and in each of them new holes are made at the required distance from the edge for the control cord.

In the case of vertical ones, a few extra lamellas are removed. Shortening the width of rolled products requires cutting the entire panel and weighting strips, finishing the outer edge.

All parts of the curtains are installed in their original place.

A plastic plug is put on.

If we are talking about an expensive product, then it is better NOT to take risks and take the blinds to professionals.

We suggest looking at how to shorten horizontal blinds yourself:

DIY shortening

When shortening the blinds, you must adhere to the rule:

• Perform all actions very carefully, since most of the elements are very fragile, they can be damaged.
• Make sure that the horizontal slats do not bend, since it is very difficult to straighten them, and the wooden planks will need to be completely replaced.
• Burn all ends of the cut fabric or cord with a flame or a hot iron, in the second case, use a newspaper so that the melted synthetic materials DO NOT stick to hot metal.
• It is necessary to assemble / disassemble the structure in a certain order so as not to damage or confuse the elements.
• Use whichever tool is suitable for the specific material.

If you adhere to all the rules outlined, then you can efficiently shorten both vertical and horizontal curtains.

Shortening any type of blind in height or width requires skill. But it is easy to complete all the actions if you follow the instructions given. It is important NOT to use force, as the structural parts of such curtains are very fragile and can break.

Is it possible?

If the blinds are made of metal or wooden slats, then working with them is more difficult than with fabric or paper counterparts. Then the use of a more complex tool and material processing skills will be required.

Most often, a change in the length of the curtains is required, since factory products are not always sold, the dimensions of which correspond to real windows after repair in an apartment or house (read about the rules for choosing and installing blinds on plastic windows here).

Vertical

Vertical structures contain the following set of parts and elements:

• Chains for lamellae and control cord, lower lamella connection;
• Weights or weighting materials, with the help of which the web of the vertical bar is pulled;
• Runners, to Which individual canvases of the structure are fixed;
• Decorative and bearing cornice.

You will need the following set of tools to shorten the height of vertical curtains:

• Painting knife or scissors;
• Roulette or ruler, pencil;
• Iron for cauterization of the lower cut off part of the product;
• Lighter or matches to form a tight end of the cut cord;
• Phillips screwdriver;
• Fine-toothed saw or hacksaw for working with metal.

Vertical blinds can be shortened in both directions: in width or in height. In the first case, you will need to trim the cornice to the required size, and in the second. each individual canvas, so the process is more time consuming than when working in horizontal counterparts.

Instructions for shortening vertical curtains:

• The dimensions of the window opening are removed, including the level of fastening of the cornice, taking into account the method of its installation. If the curtains must be to the floor, then 2 cm must be excluded from the measurements, which must be left from the floor to the curtains.
• In the case of removing the length of the blades, shortening the eaves is NOT required. Since the lower part of the lamellas has a more complex design, including s for weights, overlays for connecting with plastic chains, therefore, they are cut to the desired height from the upper part.
• Leaving a small margin for the lapels, each lamella is cut to the desired length. Remove the plastic tab from the cut area. To preserve the integrity of the canvas, process the edges with a lighter or a hot iron through a newspaper so that the material does not stick to the sole of the appliance.
• To thread the bent fabric under the lapel, you need to make a hole in the central part of the canvas, into which you drive the eyelet. For gluing the edges of the strip, strong fixation adhesives of the “Moment” type are used.

The described actions are given for one lamella. It is necessary to shorten each element of the blind structure by the same length.

To reduce the vertical curtains in width, the greatest difficulty will arise with the cornice. For this you need:

• The aluminum cord and rod are removed from the inside of the cornice. The stem washer must be intact, so the cut on this element is made 2-3 cm further. To accidentally cross-section wires, it is not worth cutting it completely.
• The rod is removed from the cornice, after processing with a file, the separated edge is pushed through the washer.
• At the desired point, the curtain itself is cut off according to preliminary measurements with the rod already installed back.
• So that the trimmed parts of the structure do NOT damage other elements, they need to be cleaned with a file. Extra hooks are removed from the cornice. Since these parts are pierced with a control cord, you need to cut it with nippers.
• The washer on the end part of the curtain is placed figuratively on the structure, followed by shortening the lace. It is necessary to Unscrew the cap fixing it with a screwdriver, cut the rope to the required length with scissors, assemble the eaves structure in the reverse order.

Horizontal

Despite the significant visual differences, horizontal blinds are similar to vertical components:

• Lifting mechanism;
• Swivel handle;
• Lamellas or cloth;
• Cord for vertical shift of curtains;
• Common cornice;
• Mounting brackets.

The lamella material is wood, plastic or aluminum. The horizontal blinds are shortened in height with scissors and a lighter or matches. This is required to cut the cord and strands of the ladder, cauterizing their ends in order to maintain integrity. Welded ends are easier to thread through holes in lamellas.

Instructions for shortening horizontal curtains:

• Measure the length of the blinds, mark the wall. You can use masking tape or other harmless materials for finishing materials that adhere to the surface.
• There are a pair of plastic plugs on the bottom of the final curtain strip. They must be removed, pulled out a little from the structure, so that the control thread can be cut. Here, after this operation, you need to cauterize the ends of the artificial cords so that they DO NOT unravel.
• To remove the interfering strips, you must first get the control cord 1 lamella higher from the mark on the wall. Then cut from 1 to the last “extra” planks after the gap formed. Remains about 2 flights of ladder.
• The lower bar with the adjacent lamella is removed, threaded into the left empty space in the main structure.
• The control cord is passed through all holes of THESE slats and strips in reverse order. At the ends of the cord, plastic clips are again put on, which are attached to the grooves on the bar. But before that you need to tuck the protruding ends of the rope ladder.

For this you need:

• Remove the plug from one side of the eaves.
• Remove all elements of the blinds or move them away from the cutting point.
• Measure the desired width of the product. Using a hacksaw for metal or wood (which the cornice consists of) perform an even vertical spray.
• Horizontal curtains are also shortened according to the width of the slats, and in each of them new holes are made at the required distance from the edge for the control cord.

In the case of vertical ones, a few extra lamellas are removed. Shortening the width of rolled products requires cutting the entire panel and weighting strips, finishing the outer edge.

All parts of the curtains are installed in their original place.

A plastic plug is put on.

If we are talking about an expensive product, then it is better NOT to take risks and take the blinds to professionals.

We suggest looking at how to shorten horizontal blinds yourself:

How to reduce in height (length) or width?

Before the procedure, it is necessary to prepare the necessary tools, which depend on the type of curtains, the direction of fit:

The easiest way is to reduce the length of the horizontal blinds when the width matches the window. It is enough to disassemble the structure from below in a certain order, remove the extra slats, and then fix the lower bar again (read how to make and install horizontal blinds here).

If horizontal blinds are chosen, then preference should be given to the coincidence of the width, rather than the length, since shortening this type of blind is easier than cutting metal or wooden slats.

In the case of vertical blinds, you need to try to guess with the length (for details on how to assemble and hang vertical blinds, read here). It is easier to remove a few side elements than to trim all the lamellas in height. In roller blinds, shortening is allowed in different directions, but the work is a little more difficult, since some materials require processing the edges of the fabric. Most often, overlocking or patching with a thin finishing tape is used (you can find out more about the types, installation methods and cleaning of roller blinds here).

Detailed step-by-step instructions on how to shorten blinds in length and width

The need to change the size and shape of the blinds appears in different situations: due to the replacement of windows, finishing the window opening, changing the shape of the slopes, etc. Is it possible to cut the blinds in width and length on your own, how to shorten the cornice? In some cases, it is necessary to contact the craftsmen so as not to damage the structure. This article describes in detail how to properly shorten the blinds yourself.

DIY shortening

When shortening the blinds, you must adhere to the rule:

• Perform all actions very carefully, since most of the elements are very fragile, they can be damaged.
• Make sure that the horizontal slats do not bend, since it is very difficult to straighten them, and the wooden planks will need to be completely replaced.
• Burn all ends of the cut fabric or cord with a flame or a hot iron, in the second case, use a newspaper so that the melted synthetic materials DO NOT stick to hot metal.
• It is necessary to assemble / disassemble the structure in a certain order so as not to damage or confuse the elements.
• Use whichever tool is suitable for the specific material.

If you adhere to all the rules outlined, then you can efficiently shorten both vertical and horizontal curtains.

Shortening any type of blind in height or width requires skill. But it is easy to complete all the actions if you follow the instructions given. It is important NOT to use force, as the structural parts of such curtains are very fragile and can break.

Tips on how to shorten vertical or horizontal blinds

Many hostesses are wondering how to shorten vertical or horizontal blinds, if the length, height and width of the window changes after repair? The same question arises if their length, width and height are standard, and the window in the house is non-standard. How to shorten horizontal or vertical blinds, rather than with the help of a professional, it is recommended to Read more.

How to shorten vertical blinds

Depending on the type of blinds, it may be necessary to adjust their size; length, width or height may be shortened. For example, if the product is made of metal, you can use a screwdriver and scissors. If the material of the product is different, other devices will be needed in order to shorten the blinds.

How to shorten vertical blinds? And what might be needed for such a painstaking procedure? In order to independently carry out the shortening of the curtains at home, you may need special tools, which may not always be in the owners’ arsenal. Therefore, many people prefer to contact those people who know how to do this.

The width of such a product is shortened due to the fact that the cornice is trimmed. For visual harmony, it is necessary that the length of the cornice exceeds the size of the window. The required size of the product is measured using a tape measure, and the indicated size is marked with a pencil. After that, the blinds previously removed from the window are directly shortened (photo). To shorten the curtain rod, you will need such devices as a hacksaw for metal or an angle grinder and a sander (with which the edge of the product is evened).

You will also need devices such as a tape measure, a screwdriver. The trimming of the curtain rod should be carried out in the place where the lifting device is located. To shorten the blinds, unscrew the side cover with a screwdriver, remove the cord to the side, cut the product, the length of which is marked in advance. The cut is neatly trimmed, hooks unnecessary after trimming are removed and the cord and chains are shortened. After the performed manipulations, the side cover is attached back, the blinds are hung on the window. This way you can shorten the blinds in length.

The fabric in each strip must be folded, drill holes for fasteners, and then fix the bar, pre-wrapped it in fabric. Next, the lamella with fasteners is stitched or fixed with glue. After the glue has dried, you can already assemble the structure and hang it on the window. This way you can shorten the blinds (on). The process of shortening horizontal or vertical curtains differs in its features and execution algorithm; different tools will also be required.

How to shorten horizontal blinds

You also need to know how to shorten the height of the blinds, how to shorten the horizontal blinds. Depending on what needs correction. length or width, the shortening procedure itself will depend. Horizontal curtains are easier to cut than vertical curtains. If it is necessary to shorten the width, simply remove unnecessary lamellas. Such manipulations can be performed without even breaking the structure, and without removing the product. First, you need to decide on the expected dimensions of the product, how many extra slats will need to be removed. To do this, after marking with a tape measure of the window itself and blinds, a mark is placed on the product with a pencil.

Next, the blinds are opened, the rope is freed from the fasteners, with the help of which the curtains are controlled. To accomplish this manipulation, plastic fasteners are pulled out of the lowest bar, the task of which is to fix the lace. The knots are untied or simply cut off the rope. To prevent further unraveling of the end of the rope, the tip is lightly set on fire. After removing the fasteners, pull out the control cord from both ends of the product.

The excess slats are removed, the height of the blinds is adjusted, while the position of the slats is adjusted so that they DO NOT fall down, do not become in an Asymmetric position. The lower bar is fixed to the last lamella, the rest of the lamellas and the lace to control the curtain are passed from it. Plastic fasteners are fixed to the ends of the cord in their original position. It is not recommended to throw away unnecessary slats, it is better to hide them, because in the future it may be necessary to replace any slats of the blinds, which may deteriorate.

It takes a lot of effort to narrow the width of the horizontal blinds and may require special tools. To reduce them, for a start, the cornice itself is shortened, after which the blinds themselves are reduced. Height, width and length of the product are adjustable. After shortening, all parts of the product are assembled, Fix x, saw off the unnecessary part, processing their edges. The assembled product is polished, processed, installed on the window in its original position. It is recommended to carefully, after rechecking all sizes, proceed to the direct shortening procedure so as not to spoil the same product with carelessly performed manipulations.

You can shorten vertical and horizontal blinds on your own, only this procedure requires a lot of effort and patience. You may also need special tools or tools. Therefore, in many cases, the owners prefer to contact the masters who can cope with such a task.

Tips on how to shorten vertical or horizontal blinds

Many hostesses are wondering how to shorten vertical or horizontal blinds, if the length, height and width of the window changes after repair? The same question arises if their length, width and height are standard, and the window in the house is non-standard. How to shorten horizontal or vertical blinds, rather than with the help of a professional, it is recommended to Read more.

How to shorten vertical blinds

Depending on the type of blinds, it may be necessary to adjust their size; length, width or height may be shortened. For example, if the product is made of metal, you can use a screwdriver and scissors. If the material of the product is different, other devices will be needed in order to shorten the blinds.

How to shorten vertical blinds? And what might be needed for such a painstaking procedure? In order to independently carry out the shortening of the curtains at home, you may need special tools, which may not always be in the owners’ arsenal. Therefore, many people prefer to contact those people who know how to do this.

The width of such a product is shortened due to the fact that the cornice is trimmed. For visual harmony, it is necessary that the length of the cornice exceeds the size of the window. The required size of the product is measured using a tape measure, and the indicated size is marked with a pencil. After that, the blinds previously removed from the window are directly shortened (photo). To shorten the curtain rod, you will need such devices as a hacksaw for metal or an angle grinder and a sander (with which the edge of the product is evened).

You will also need devices such as a tape measure, a screwdriver. The trimming of the curtain rod should be carried out in the place where the lifting device is located. To shorten the blinds, unscrew the side cover with a screwdriver, remove the cord to the side, cut the product, the length of which is marked in advance. The cut is neatly trimmed, hooks unnecessary after trimming are removed and the cord and chains are shortened. After the performed manipulations, the side cover is attached back, the blinds are hung on the window. This way you can shorten the blinds in length.

The fabric in each strip must be folded, drill holes for fasteners, and then fix the bar, pre-wrapped it in fabric. Next, the lamella with fasteners is stitched or fixed with glue. After the glue has dried, you can already assemble the structure and hang it on the window. This way you can shorten the blinds (on). The process of shortening horizontal or vertical curtains differs in its features and execution algorithm; different tools will also be required.

How to shorten horizontal blinds

You also need to know how to shorten the height of the blinds, how to shorten the horizontal blinds. Depending on what needs correction. length or width, the shortening procedure itself will depend. Horizontal curtains are easier to cut than vertical curtains. If it is necessary to shorten the width, simply remove unnecessary lamellas. Such manipulations can be performed without even breaking the structure, and without removing the product. First, you need to decide on the expected dimensions of the product, how many extra slats will need to be removed. To do this, after marking with a tape measure of the window itself and blinds, a mark is placed on the product with a pencil.

Next, the blinds are opened, the rope is freed from the fasteners, with the help of which the curtains are controlled. To accomplish this manipulation, plastic fasteners are pulled out of the lowest bar, the task of which is to fix the lace. The knots are untied or simply cut off the rope. To prevent further unraveling of the end of the rope, the tip is lightly set on fire. After removing the fasteners, pull out the control cord from both ends of the product.

The excess slats are removed, the height of the blinds is adjusted, while the position of the slats is adjusted so that they DO NOT fall down, do not become in an Asymmetric position. The lower bar is fixed to the last lamella, the rest of the lamellas and the lace to control the curtain are passed from it. Plastic fasteners are fixed to the ends of the cord in their original position. It is not recommended to throw away unnecessary slats, it is better to hide them, because in the future it may be necessary to replace any slats of the blinds, which may deteriorate.

It takes a lot of effort to narrow the width of the horizontal blinds and may require special tools. To reduce them, for a start, the cornice itself is shortened, after which the blinds themselves are reduced. Height, width and length of the product are adjustable. After shortening, all parts of the product are assembled, Fix x, saw off the unnecessary part, processing their edges. The assembled product is polished, processed, installed on the window in its original position. It is recommended to carefully, after rechecking all sizes, proceed to the direct shortening procedure so as not to spoil the same product with carelessly performed manipulations.

You can shorten vertical and horizontal blinds on your own, only this procedure requires a lot of effort and patience. You may also need special tools or tools. Therefore, in many cases, the owners prefer to contact the masters who can cope with such a task.