How to cut the curtains to length correctly

How to neatly trim the curtains of the thread to the desired length

curtains, length, correctly

How to trim curtain threads exactly

The standard curtain length is up to three meters. Usually there is a need to shorten the product. It is not necessary to go to the atelier and pay the master for the work. At home, you can easily cut curtains-threads, both in length and in width of the product. What is required for this, consider below:

  • Remember that this procedure cannot be performed in a horizontal position. The threads can get tangled, and, as a result, it will not be possible to cut them exactly. the product will be damaged. To avoid mistakes, hang the curtains on the cornice, as they will hang after trimming.
  • The curtains should hang for three days. This is necessary in order for them to stretch out. This is the only way to ensure that the threads are strictly vertical and parallel to each other. This will create the most graceful effect.
  • Check carefully that the fabric is perfectly flat. Only then proceed with pruning.
  • Take some tailor’s scissors and trim the curtains neatly.
  • Thread curtains made of quality material do not require additional processing.

To simplify the process, try pressing the ends of the threads to the floor with a piece of cardboard.

Scissors for work must be sharpened, otherwise they will “chew” the threads and can damage the appearance of the product.

Now that you know how to cut filament curtains without problems, feel free to purchase them, because, without exaggeration, they can adequately decorate any room.

How to trim curtains-threads curly

Above, we described in detail the procedure for horizontal trimming of curtains. But the curtains at the bottom don’t have to be straight. Curly trimming is popular. Do not be afraid and think that only a professional seamstress can do this. You will completely cope with this on your own, and we will tell you how to shorten the muslin figured.

The actions for curly cropping are, in general, similar to the instructions described above:

  • Hang the curtains for exactly a few days. Above the curtains have a wide ribbon-border. For it, you can hang the curtain on a regular cornice with clothespins. There is an alternative: sew on the curtain tape for the hooks and hang the curtain using the hooks on the cornice.
  • When they are perfectly straight, you can start cutting.
  • Make a stencil out of thick paper. You can use a cardboard box as a material. The stencil is needed to ensure that the cut line of the cut is clearly tailored to your wishes.
  • Attach the stencil to the curtains. Better ask someone for help. This makes it easier for you to do your work.
  • Trim the excess length carefully. Be careful, don’t rush.

On the Internet, the question of how to process the ends of the threads is often encountered. We wrote above that in most cases this is not required. However, any situation can arise. Here are the most convenient ways to process a slice:

  • beads can be sewn onto the end of the thread, or you can tie it into a small knot;
  • If the item is made of synthetic fabric, try setting it on fire with a lighter. Check this method first on a small piece of fabric so as not to spoil the product;
  • another option: touch up the ends of the threads with transparent nail polish, it will not let them bloom.

It should be understood that these methods do not always look aesthetically pleasing and can spoil the attractiveness of the muslin curtain. Before using them, think carefully whether it is really so necessary.

How to trim to length

To reduce the length of the muslin curtain, you do not need to go to sewing shops. In order to evenly cut the threads of the new curtain, they must be given time to sag (on average 2-3 days). After that:

  • a small number of threads are clamped between the index and middle fingers of the left hand (for right-handers). The required length is measured with the same hand;
  • excess threads are cut with scissors under the fingers;
  • with the left hand, a new strand is typed, it is also clamped between the fingers and aligned with the previously cut.

There is no need to be afraid that all the strands will turn out to be different in size, because after the first trimming, you can walk again with scissors and change the length or shape of the muslin.

The most interesting thing is that, thanks to the special processing, the cut threads do not start to “shaggy”. This means that they can be given any shape without spoiling the appearance of the curtain.

How to clip, trim and tie beautifully: 20 photos and tips on how to fix curtains on a window and doorway

Tell: Anna Kuzmina

Kiseya. thread curtains. light and airy, so there are many options for attaching it. Even on the most ordinary curtain rod in the form of a pipe, such a curtain can be hung in two ways: tightly or stretched.

How to fix filament curtains in a doorway

Filament curtains can be used to decorate not only windows, but also rectangular doorways, arches or ceiling plasterboard structures, with the help of which the room is zoned.

But it can be difficult to attach muslin in such places, since a regular cornice protrudes above the wall, and a thin profile one does not fit into complex curved shapes.

It is for this reason that Velcro tape is most often used to decorate the arch. It consists of two parts. the so-called “mom” and “dad”. The soft half, or “mom”, is sewn to the back of the muslin, and the hard, or “dad”, is glued to the structure. In this case, the place of fixation is degreased in advance. If the Velcro tape does not have an adhesive side, you can attach it with a glue gun.

With the help of Velcro, you can fix the thread curtain on the window itself. To do this, its hard side is glued directly to the frame, and the soft side, as in the previous case, is fixed on the curtain.

In addition, the thread curtain can be fixed on the doorway using:

  • elastic bands (knitted lace) and nails. An elastic band or a drawstring is passed through the edging of the curtain, while the curtain is slightly pulled together. On both sides of the doorway, two nails are nailed, on which the edges of the elastic are fixed;
  • hooks and satin ribbons. Hooks are driven into the wall above the doorway at an equal distance. The muslin curtain edge is folded several times and tied with ribbons. their number should be equal to the number of hooks. Each ribbon is attached with a hook.

A way to fix filament curtains using the example of other curtains:

How beautiful to tie

Kiseya is a versatile product that can be used, among other things, even for decorating walls. But in some cases, the freely hanging threads of such curtains can interfere, so you need to know how to tie them correctly.

For example, if a thread curtain hangs in a doorway or on a door leaf, it is better to divide it into two equal halves and fix it on both sides of the opening.

  • instagram.com/jacktarslocker/
  • instagram.com/linzeds/
  • instagram.com/little_pink_apartment/
  • instagram.com/amelco_shop/
  • instagram.com/interiordesign_beadedcurtain/

If the door has a decorative function, or it is rarely used (for example, it is an emergency exit), then you can divide the curtain into two parts, each of which is fastened in the middle.

If muslin is used for zoning a room, then there is no need to use permanent grabs. It is enough to fasten a hook on the nearest wall, into which you can insert threads when it becomes necessary to remove them.

  • instagram.com/sustainablestylist/
  • instagram.com/laurie2357/
  • instagram.com/amelco_shop/

Kisei hanging on the window can be tied in two ways. The most common option is to pick up only one side. In this case, half of the curtains almost completely opens the window, and the other darkens it.

  • instagram.com/ip_perdeci/
  • instagram.com/amelco_shop/

The second option is to divide the muslin into three equal parts. The left and right sides are tied with grabs, and the central part remains free hanging. A similar design option for curtains can also be used when the curtain is hanging on the wall.

  • instagram.com/modafabrik/
  • instagram.com/interiordesign_beadedcurtain/
  • instagram.com/amelco_shop/
  • instagram.com/ip_perdeci/

with balls and beads

If the muslin gets tangled with balls or beads, then first of all you need to calm down and put the scissors away. After all, such a product can still be saved. Then you need:

  • Fix those strands with beads that are not tangled yet. To do this, you need to take a small piece of cardboard and a rubber band. Thick thick paper is applied to the bottom of the threads with balls, they are wound on cardboard, which gradually rises to the top of the product. When about 20-25 cm remains to the edge, the threads are fixed on the paper with an elastic band.
  • Remove the curtain from the eaves and lay it on the floor.
  • Take a knot and try to loosen it.
  • Start pulling out the threads without beads or balls and shift over the edging.

To understand that the thread is empty, you must first carefully pull it from the side of the piping. If there are no balls about 20-25 cm from the top of the product, then the correct thread has been found. Then:

  • When the knot decreases in size, the “released” threads behind the piping return to the total mass.
  • The curtain is folded 2-3 times, fixed on a hanger with pintucks (usually these are used to store trousers or skirts) and clings to the cornice.
  • The remaining assembly is neatly disassembled by weight, starting at the top. Balls or beads move slowly and release.

After all the muslin threads are untangled, the curtain, together with the hanger, is removed from the cornice, transferred to the floor and repeatedly tied with soft ribbons. This is done so that the curtain does not get tangled again when you transfer it to the curtain.

from threads

If the curtain consists entirely of threads, it can be unraveled without removing it. For this:

  • the product moves to the center of the cornice;
  • muslin “combed” with your fingers (you need to start from the top);
  • the detected nodules are first shaken and relaxed a little, and then gradually disassembled;
  • the finished curtain stretches along the cornice.

How to unravel the muslin.

String curtains can get tangled, but this never happens without a reason. They may have been washed incorrectly or hung incorrectly on the cornice. Be that as it may, but an ugly knot should be quickly disposed of.

How to cut roller blinds to the width yourself

Roller blinds are most often cut in order to change the design of the room, to decorate, to adjust them in accordance with the dimensions of the window openings. This is necessary when you change your place of residence. If initially your window had the same dimensions, and then you moved into another apartment and at the same time you do not want to buy new window structures, you need to know how to cut roller blinds in width yourself.

Anyone can do this in the presence of an ordinary tool, which is at hand for every housewife. In order to get started, you first need to measure the size of the window. To do this, follow these steps:

  • Hang the fabric on the cornice above the window.
  • Spread out the curtain material, let it hang a little, take the final shape.
  • Make accurate measurements and write down the information received.

The length can be reduced in size in a matter of minutes. To do this, simply make a double or triple hem and hide up to 20-30 cm of rolled fabric in this way.

We select tools

In order to cut roller blinds in width yourself, you will need the following tools:

  • soap or a special pencil for fabric;
  • household scissors or a sharp stationery knife;
  • needles, threads;
  • tape measure.

If the curtains are too wide, which goes beyond the size of the window, you need to narrow them. Initially, you need to unfold the canvas, after removing the plugs. Please note that the rolls are equipped with special weights, which must also be removed and cut to fit the new window.

Step by step guide

Use soap and a tape measure to mark the curtain fabric accordingly. Before you cut the roller blinds shaft and bring it to the required length, you need to measure the width of the window, stepping back 2-3 cm from the length of the bracket.

Pattern Matching Fabric. How to join patterned fabric

Then you need to install the plugs and cut off the excess part of the rail, which in the end should be equal to the length of the shaft.

The curtains are also marked with soap and a measuring tape. With a sharp clerical knife or ordinary household scissors, the curtain fabric is cut to the width of the bottom of the rail.

Then the material is attached to the shaft. To do this, it must be tightly wound, having previously glued a protective tape with a self-adhesive base. The canvas must be wound carefully and adhere to a strictly horizontal position in relation to the shaft. Avoid the slightest distortions, as in this case all the work will be done in vain.

Fold 5 cm of the blade so that a fold is formed where the shaft with the glued tape will be installed. Do not indent too much, as in this case the shaft will slip and will not be able to firmly lock in the desired position.

Then you need to roll it along the top of the curtain and roll it 3/4 of the length. Install the bottom rail into the hole on the shade. Insert the bracket into the very end of the control mechanism, then insert the other end in the same way. Upon completion of the work, all the parts that secure the system must be assembled, and the roller blind, shortened in width, must be hung in the place designated for it.

As you can see, it will not be difficult to cut the roller blinds to the width yourself. Here the main thing is care and diligence, as well as an hour of free time and the availability of the necessary working tools at hand.

How to cut fabric evenly?

Needlewomen and just housewives face difficulties when the purchased curtains do not fit in length, and they must be cut correctly. To do this, you need to know some of the nuances that will facilitate the process of reducing the length of the curtains.

First of all, the fabric should be laid out on a flat surface. The bottom of the curtains should be wrapped in the amount of fabric in centimeters that you want to cut off, while not forgetting to leave space for subsequent hemming. When the surface is perfectly flat, the fold should be smoothed by lightly pressing on the fabric.

With one hand, you need to hold the folded fabric by the edge that is at the top (for reliability, it is better to pin it with pins or needles), and with the other, you can start cutting. It is very easy to cut roller blinds or other thick fabrics this way.

But if you need to shorten a synthetic fabric such as organza or tulle, then some nuances may arise. To do this, it is better to focus on the factory edge of the fabric, since during production it is always made even.

It is necessary to fold the fabric in half, aligning strictly along the edges. This will also allow you to notice if the curtains were purchased already uneven. In cases where the edge is uneven, it should first be cut at both edges, then folded in half and aligned with the center. Next, you need to make cuts at the bend in those places where previously marks were made to match the fabric. After that, the fabric must be folded in 2 layers and connect the cuts at the edges and in the middle, outlining the fishing line with soap using a long ruler. An incision should be made along this mowing line to determine an even edge of the fabric. You will also need to align the other edge of the curtain in the same way. Cut the fabric, remembering to leave up to 10 cm for the hem at the bottom.

Video of processing curtain corners:

The next step involves folding the fabric in half in width, carefully aligning all the edges, and then smoothing to avoid creases and folds. It remains to cut the fabric along the fold and do the same with the rest of the pieces.

To shorten properly sliding fabrics that are difficult to fold and fix evenly, you should measure the required length, making a notch in the right place, and then pull out the thread carefully. According to the formed mowing line, the curtains should be cut.

Curtain trim video:

How curtains are cut, trimming curtains-threads. video

How to cut the curtains and hem them is a topical question for many housewives. Window decor is the final stage in the design of the room. Indeed, today more and more often they not only independently process the fabric of curtains and curtains, but even sew these interior items.

Seam processing methods

When the curtains or curtains have been cut correctly, they need to be hemmed. There are several ways in which you can process seams of various fabrics. Let’s consider the main ones:

  • Manual. blind seam. This is a rather laborious method that requires some experience.
  • With a typewriter. a regular line. This is the most versatile and easiest way if you have a sewing machine.
  • “Gossamer”. with the help of a special adhesive tape. Shortening in this way is permitted for fabrics that are ironed only at low temperatures.

Video of filing an oblique inlay in 3 ways:

In addition to standard methods, there are also extraordinary solutions, for example, how to shorten the curtains without cutting them off. In this case, you need to adhere to the following procedure:

  • First of all, you should hang the curtain on the cornice, after which, using a needle and thread, starting from the middle, make do-it-yourself stitches to the edges. In the side stitches, you need to round off a little, and make the central seam 20 cm higher in comparison with the side.
  • The top of the thread should be fixed.
  • We pull the thread down until we get the desired length.
  • Finally, we fix the seams.

Another option for smooth processing of edges without cutting off involves the use of non-woven tape. To do this, you need to bend the curtain to the desired length, and then glue the tape.

And another option for shortening curtains is to use curtain magnets, ribbons, crabs and other items to secure the fabric.

How to cut thread curtains?

Kisei curtains look very original and modern, so they are in great demand. But quite often, such products are purchased in a standard length that does not correspond to the required size for decorating a window. Therefore, you need to know how to cut a cotton curtain at home.

The procedure for trimming yarn curtains resembles hair cutting. The process consists of the following steps:

  • If the curtains are laid out horizontally, then it will not be possible to cut them exactly. Therefore, they should be hung on the cornice and wait a couple of days for them to align and stretch. When the muslin hangs evenly, it can be trimmed with scissors.
  • Curtains should be trimmed with scissors neatly on the weight, and there is no need to pull the threads. You can trim it both straight and creating a curly bottom. In order to be able to cut the curtains evenly, it is recommended to use a book or cardboard that will hold the threads for cutting.
  • Thanks to the special weaving, the filament curtains do not need further processing. That is, they will not unravel over time.

Filament curtain trimming video:

If you are in doubt that you will be able to cut the curtains evenly, you can use a wide-toothed comb. The threads, like hair, will be passed through the teeth of the comb to the desired length, therefore, by pressing them to the edge, you can evenly cut the required length.

How to choose the right curtains: tips from the pros

Curtains are not just comfort, but also practicality. After all, it is they who protect the room from sunlight, dust, night “lights”, circulation of cold (hot) air and other factors. Therefore, you need to choose curtains with all responsibility. How? Interior designer Daria Pikova talks.

Curtains for different rooms: what to consider when choosing

Pro Secrets You Should Know About

To visually add warmth to the room, it is best to hang curtains in warm shades: light green, yellow, brown, beige, gold, orange, yellow-green. If the room faces the north side, then this is simply an irreplaceable option. In addition, warm tones visually bring closer and enlarge the window.

As for the cold colors (blue, light blue, lilac, neon, sapphire, turquoise), they are perfect for those rooms that face the sunny side. Cold colors of curtains create a feeling of coolness and visually alienate the window.

To prevent the window from looking narrow and small, hang curtains on the cornice. But keep in mind that the cornice should protrude beyond the window frame by about 20-25 cm on both sides.

High ceilings can be visually reduced with curtains that hang at window level. It is even better if they are bright, active shades. You can use lambrequins or brushes as a supplement. They, like color, distract attention from high walls.

If the window in the room is low in relation to the ceiling, then the cornice must be raised as high as possible, and the curtains must be hung in such a way that they touch the floor. This will visually lengthen the window and make it taller.

What to consider when choosing curtains?

  • Curtains with a transverse contrast print visually expand the room, and the vertical pattern makes it more elongated.
  • If you do not want the curtains to touch the floor, then the distance between their edge and the floor covering should be 5–8 cm, and if on the contrary, their length should exceed the height of the wall by 15–20 cm.
  • Are there small piers on the sides of the window? Do not close it with curtains. this way you will only “weigh down” the look of the room.
  • For rooms with low ceilings, choose curtains made from light fabrics in light shades.
  • Long curtains will not work in a nursery, kitchen or office, it is better to choose Roman blinds or, as an option, French curtains.
  • Long light curtains will decorate and adjust the volume of small rooms. Hang dark curtains in a large room. the space will immediately become more intimate, more comfortable.

How to decide on the color of the curtains?

If you are not going to change the furniture in the room in the near future, then you can choose the curtains to match the color of the furniture. Now this technique is one of the most popular among designers. In this case, you should choose the color of the curtains the same as the color of the furniture, or it should be as close as possible.

A great option is curtains in neutral tones. It can be sand, beige, cream or natural. Such curtains always look beautiful and unobtrusive.

If the interior of the room is made in one color, then the curtains should slightly shade the general background. In other words, you should choose curtains in such a color that they do not blend in with furniture and wallpaper. It is best to choose curtains two or three shades lighter or darker than the interior of the room.

Two-tone curtains are also popular. they go well with the color scheme of any room.

Bedroom

Choose curtains in such colors that they do not stand out from the overall picture of the interior. Pay attention to more calm and unobtrusive tones. they create a quiet, comfortable environment.

Option 2. Pickups and cascades

Filament curtains look very impressive when tied up: a cascade of filaments creates a window dress of unique beauty. We just intercept the filament curtains in the middle with a contrasting long ribbon or braid (or you can pick it up to match. it depends on the general style of the interior). Raise the ends of the tape to the desired height and fix it on the cornice. How do you like this thread “fountain”? The place of the knot can be decorated with a suitable bow or flower.

How to shorten tulle without trimming. simple and practical tips

Force majeure: how to shorten the tulle with your own hands without cutting

How often everything goes wrong in our life! Either the bosses deprive them of the bonuses, then the extra pounds are taken from somewhere, then an important meeting breaks down. In any area, at least once, but something goes wrong. And how many surprises a renovation, a house purchase or a move can bring! On a showcase, for example, wallpaper or window curtains do not look the same as in your room, but in a new apartment there are more windows, a smaller kitchen, and higher ceilings! But you can find a way out of every force majeure!

If your curtains or tulle after buying or moving were longer than necessary, we will tell you how to shorten them with your own hands, without cutting, and sometimes even without resorting to the help of a sewing machine. After all, not every one of us is a born needlewoman. (Although in some examples it will still come in handy. But these are solutions for those who are friends with the typewriter. Others will find simpler ideas here).

Option 4. Justifying the excessive length

We tie the material in the middle with a neat knot, slightly weakening it from the sides. Get a flirty window dress.

How to shorten curtains without trimming: 3 techniques

Trimming or turning curtains may be required if you want to change the interior, remove the edge of the fabric that has lost its proper appearance during operation, and more. There are many options to carry out this process, but it all depends solely on: personal preferences, the availability of inventory at hand, free time, the type of material and what kind of edge you need to make, for example, curly or even.

We use magnetic pickups

You can shorten the tulle with your own hands using scallops. We form them using magnetic grabs, grabbing the fabric to the desired length evenly in several places. Pickups can be matched or contrasting. it depends on the general style of the room.

You can also collect the canvas in several places with a needle and thread, pull it off, and then fasten.

How to cut fabric evenly?

Needlewomen and just housewives face difficulties when the purchased curtains do not fit in length, and they must be cut correctly. To do this, you need to know some of the nuances that will facilitate the process of reducing the length of the curtains.

First of all, the fabric should be laid out on a flat surface. The bottom of the curtains should be wrapped in the amount of fabric in centimeters that you want to cut off, while not forgetting to leave space for subsequent hemming. When the surface is perfectly flat, the fold should be smoothed by lightly pressing on the fabric.

With one hand, you need to hold the folded fabric by the edge that is at the top (for reliability, it is better to pin it with pins or needles), and with the other, you can start cutting. It is very easy to cut roller blinds or other thick fabrics this way.

But if you need to shorten a synthetic fabric such as organza or tulle, then some nuances may arise. To do this, it is better to focus on the factory edge of the fabric, since during production it is always made even.

It is necessary to fold the fabric in half, aligning strictly along the edges. This will also allow you to notice if the curtains were purchased already uneven. In cases where the edge is uneven, it should first be cut at both edges, then folded in half and aligned with the center. Next, you need to make cuts at the bend in those places where previously marks were made to match the fabric. After that, the fabric must be folded in 2 layers and connect the cuts at the edges and in the middle, outlining the fishing line with soap using a long ruler. An incision should be made along this mowing line to determine an even edge of the fabric. You will also need to align the other edge of the curtain in the same way. Cut the fabric, remembering to leave up to 10 cm for the hem at the bottom.

Video of processing curtain corners:

The next step involves folding the fabric in half in width, carefully aligning all the edges, and then smoothing to avoid creases and folds. It remains to cut the fabric along the fold and do the same with the rest of the pieces.

To shorten properly sliding fabrics that are difficult to fold and fix evenly, you should measure the required length, making a notch in the right place, and then pull out the thread carefully. According to the formed mowing line, the curtains should be cut.

Curtain trim video:

Nylon tulle

Nylon is a rather tough weave. It is permissible to hem the bottom of nylon tulle in two ways:

When performing a double hem, the width of the fold of the material should be at least 3 cm.

Methods: how to trim filament curtains

No less popular, in contrast to conventional curtains, roller and thread. The second type has recently become very popular due to the type of product. The curtains themselves look very original, they are sold in a large assortment and, most importantly, there is an opportunity to use them for absolutely any room. To trim the muslin or, in other words, curtains in which threads are present in large quantities, you do not need to go to an expensive atelier, since there are more affordable and cheaper ways to shorten.

How to cut fabric straight, square and on grain.

Methods:

  • Performing an undercut in a horizontal view is categorically undesirable, since the threads will get confused, and the undercut will not turn out even at all, which will significantly spoil the look of the curtains.
  • The curtains are hung at their location after purchase and washing for 3 days, which is enough to straighten them. This way they will all be vertical and parallel to each other.
  • As soon as the flatness of the canvas is checked, you can make an undercut, for which the most ordinary fabric scissors are suitable.
  • If the curtains are made of high-quality material, then additional processing is not required.
  • Scissors should be sharpened so as not to jam the threads.

There is a simpler and more creative option and this is tying knots on the threads. Thus, they will not get confused and remain in perfect condition for a long time.

Ideas: how to shorten curly curtains

Different housewives have different tricks on how to trim or hem the curtains, and the choice of method depends on: the width and length of the canvas, the type of material and the experience of the needlewoman. It is worth noting that the cut of curtains must not always be even, since curly edges have become very popular lately. You shouldn’t think at all that only a professional seamstress can make such a decorative undercut, since it is available even to not too experienced needlewomen, subject to the recommendations from specialists of the highest category.

Recommendations:

  • You need to hang curtains in their place of permanent residence for several days, and preferably after washing. To hang curtains, you can use a braid, a border or a special tape that is sewn to the top edge.
  • After a few days, the material will straighten under its own weight and will be perfectly even.
  • Next, using thick paper and scissors, stencils should be made. A cardboard box is suitable for this. The choice of a mowing line depends solely on personal preference or design idea.
  • The stencil is applied to the curtains, for which it is better to use additional help.
  • Excess length is neatly trimmed.

What to do with the cut edge and how exactly to process it so that it does not crumble? There are several methods by which serious consequences can be avoided. Previously, to fix the edge of materials such as tulle and organza, they used a lighter, or a candle, with which the edge was singed.

It is advisable to first test the method on a piece of fabric in order to avoid inflammation and damage to the canvas.

An acceptable and safer option is to tint the edge of the canvas with nail polish without color. It will not allow the fabric to unravel, and will also remain even after washing the material. Tucking and sewing the edge or sewing on a bias tape is considered the best option. So the canvas will be beautiful and retain its aesthetics. Depending on the type of canvas, you need to select and cut methods.

How to shorten curtains without trimming: 3 techniques

Trimming or turning curtains may be required if you want to change the interior, remove the edge of the fabric that has lost its proper appearance during operation, and more. There are many options to carry out this process, but it all depends solely on: personal preferences, the availability of inventory at hand, free time, the type of material and what kind of edge you need to make, for example, curly or even.

Methods: how to shorten tulle without trimming

How to shorten the curtains correctly without cutting the edge?

This may be required:

  • To preserve the integrity of the canvas;
  • To avoid crumbling the edge;
  • If in the future it is planned to dissolve the material or move it to a new place.

To shorten long curtains, you need to place them in the usual place where they will be used. Then you need to turn the material to the desired length and sew along the edge with loose stitches, while not fixing the end of the seam located at the bottom. The bottom corner should be slightly rounded.

All this is done along the edges of the fabric and in the middle. The middle seam should be 20 cm longer than the side seam. Once all the seams are ready, you need to pull each of them by the threads located at the top, which will allow you to make original folds. Both manual sewing and machine sewing are perfect for this procedure.

How to cut the tulle straight

Cutting the tulle exactly is not as easy as it might seem at first glance, since various defects may occur during the cutting process, which directly depends on the quality of the material. For example, there may be the following nuances: arrows, both vertical and horizontal, the fabric may begin to crumble, and an illiterately cut fabric will have an uneven edge.

There are several techniques you can use to trim the tulle to width:

  • Moscow;
  • Traditional;
  • With an oblique inlay.

It is important to remember that tulle is a fabric with the maximum subtlety and fragility, and therefore it is categorically undesirable to carry out a zigzag stitch and overlock, which will simply ruin it. It is worth noting that the most optimal option for hemming tulle is a seam hem, which is suitable for such a fabric.

Depending on the type of fabric, the width of the hem is chosen: if it is a tulle mesh, then the fold will be only 1 cm, nylon and organza are folded up by 3 cm.

Bias binding is considered to be an excellent choice for creating original material side appearances, especially when contrast is required. With regards to the color of the bias inlay, it is quite possible to choose a shade in accordance with the tone of the fabric or in contrast to it. It is best that the tone of the bias inlay is combined with at least one of the tones present in the interior. It is not at all difficult to cope with a bias inlay, since it was created specifically for sewing tulle mesh or embroidered material with your own hands. With its help, folds are formed and create an elegant drapery.

For sewing the Moscow seam, you can use a regular sewing foot. In other words, it is required to make the smallest possible hem and stitch it along the edge. The peculiarity of the method is that it does not take too much time and special preparation, only a sewing machine is needed.

How to cut roller blinds to width

All methods of undercutting and shortening are simple and do not require additional investments. This simplifies the process of home furnishing with original interior details.