How to dilute Huter Grass Trimmer Gasoline

Fuel ratio

If the mixture is diluted correctly, for example, in compliance with the instructions below, then the equipment will serve you for more than one year without serious technical breakdowns. At the same time, fuel consumption will be low, and the result of work will be high. The fuel preparation process should always be the same and constant. It is better to use the same ingredients always, without changing the brand indicated by the manufacturer.

It is not worth adding a lot of oil, it can damage the operation of the engine, but you should not save on it either. To maintain the correct proportions, always use the same measuring container, so as not to be mistaken with the quantity. Medical syringes can be used to measure the oil, but some manufacturers, along with the oil, provide a measuring container with risks in the kit.

The most correct ratio of oil and gasoline is 1 to 50, where 50 is the amount of gasoline, and the amount of oil is 1. For a better understanding, let us explain that 1 liter is equal to 1000 ml. So, to get a ratio of 1 to 50, divide 1000 ml by 50, we get 20 ml. As a result, only 20 milliliters of oil need to be added to 1 liter of gasoline. To dilute 5 liters of gasoline, you need 100 ml of oil.

In addition to maintaining the correct proportion, it is necessary to follow the mixing technology of the ingredients. In no case should you just add oil to the gas tank. It is better to follow the following step by step instructions.

To dilute the mixture, you must prepare in advance a container in which you will mix gasoline and oil. This can be a clean metal or plastic canister with a volume of 3, 5 or 10 liters to make it easier to calculate the amount of oil. Do not use drinking water bottles for this purpose. they are made of thin plastic that can dissolve from gasoline. Use a special measuring container to measure the oil. But if there is none, then, as already noted, medical syringes with a large dosage will do.
Pour gasoline into the canister, without adding a couple of centimeters to the full volume. In order not to spill gasoline, take a watering can or insert a funnel into the neck of the canister. Then take the required amount of oil into a syringe or measuring device and pour it into a container with gasoline. It is not recommended to do the opposite. pour gasoline into oil.
Close the bottle tightly and stir the mixture. If, during the preparation of the mixture or its mixing, part of the fuel spills out, you must immediately wipe the canister with a dry cloth.
Be sure to follow fire safety measures. Keep the mixture away from fire and never leave leftover fuel or used materials within easy reach of children.

And one more important point: it is better to prepare the mixture exactly the amount that fits into the fuel tank of your brushcutter. It is undesirable to leave the remains of the mixture.

What kind of gasoline can I put in a grass trimmer??

Before deciding which gasoline to use in the grass trimmer, some of the terms used need to be defined.

Grass trimmers are available with four-stroke or two-stroke engines. Four-stroke grass trimmers are the most powerful and sophisticated in design, and are lubricated by an oil pump. The engine runs on pure gasoline. For two-stroke units. simpler ones. preparation of a fuel mixture consisting of gasoline and oil is required. It is due to the amount of oil in the fuel that the rubbing parts in the cylinder of this engine are lubricated.
To prepare the mixture, you need a certain grade of gasoline AI-95 or AI-92. The brand of gasoline depends on its ignition speed. octane number. The lower this indicator, the faster gasoline burns and the greater its consumption.

Many models of petrol cutters have two-stroke engines running mainly on AI-92 gasoline. The fuel for them must be mixed independently. It is better to pour gasoline of the brand specified for it by the manufacturer into the brushcutter, otherwise the grass trimmer will fail faster. For example, with AI-95 gasoline, the engine will quickly overheat, and when choosing AI-80, the fuel mixture turns out to be of very low quality, therefore the engine operation will be unstable and with low power.

In addition to choosing a brand of gasoline, when preparing a fuel mixture for brushcutters, you need to use a special oil designed specifically for two-stroke engines. Semi-synthetic and synthetic oils are well suited for benzos. Semi-synthetic oils are in the middle price range, they are suitable for such equipment from any manufacturer, they lubricate the necessary engine elements well. Synthetic oils are more expensive, but they will keep the engine running longer. In any case, when buying equipment, you should carefully read the instructions, since sometimes the manufacturer gives recommendations on the use of specific brands of oil.

If you buy Russian-made oil, then it should be marked. 2T. For a long service life of your equipment and its good condition, you never need to use oils of unknown origin.

Gasoline for a lawn mower: which one to choose and how to dilute?

For those people who have a summer cottage or a country house, very often there are difficulties with the overgrown grass on the site. As a rule, it is necessary to mow it several times per season and get rid of thickets. Currently, there is a wide range of garden and vegetable garden equipment on the market. One of these helpers can be attributed to a lawn mower, in other words. a grass trimmer. For effective and long-term operation of such equipment, it is necessary to fill it with high-quality fuel or properly prepared fuel mixtures.

Features of refueling brushcutters

When the mixture is prepared and ready for use, it must be carefully poured into the fuel tank. Since gasoline is a toxic liquid, safety precautions must be observed when working with it. Work must be carried out in calm weather and away from strangers. And also to pour fuel into the tank, you need to use a watering can or funnel with which you previously diluted the mixture. Otherwise, the mixture may spill, go unnoticed, and ignite when the engine heats up.

The fuel bank itself must be cleaned of external contaminants and only then unscrew its cap in order to refuel with the prepared fuel. Once the fuel has been filled, the tank should not be left open, as insects or soil can enter it and clog the fuel filter. Fuel must be poured into the tank up to the indicated mark or less, and then refilled during operation.

As noted above, you should not prepare the mixture more than is necessary for work, it is better to cook less and, if necessary, repeat the process, mixing gasoline with oil again. If there is still unused fuel left, then it must be used up within 2 weeks.

During storage, the container must be tightly closed with a lid. You need to store fuel in a cool room, in a place where the sun’s rays do not penetrate. It is worth remembering that with long-term storage of the mixture, the oil liquefies and loses its properties.

Whatever brand your equipment is, it requires careful attitude and high-quality fuel. If you follow all the recommendations and use fuel sparingly, your lawn mower will serve you for more than one season, and the land plot will always be in perfect order, without weeds and dense thickets of grass.

How to thin the grass trimmer gasoline outboard motor

How to mix oil with gasoline for your #GadgetPostal grass trimmer. Making a bottle for mixing gasoline and oil for two-stroke engines Choosing oil for a boat motor. The Chinese cause of the bad. A grass trimmer or lawn mower is a must-have tool in the household. over, its reliability, efficiency and long service life depend on many factors. For example, the quality of fuel. For the grass trimmer to work effectively, a two-stroke engine oil must be selected. This is due to the lack of an oil sump in such a device. Everyone knows that two-stroke engines run on a gasoline-oil mixture. Otherwise, an expensive garden tool will fail. We have made a convenient calculation that will help you easily get the data you need. Enter the initial data: The ratio is offset 1: For example :. etc. Gasoline volume. liter. The result of calculating the fuel mixture: Oil ratio. Proportion for gasoline volume 1.75 liters. Features of fuel for two-stroke engines and classification of oils. Practical advice on how to dilute gasoline with grass trimmer oil. Grass Trimmer Fuel Mixture: Practical Tips. A lawn mower is the same equipment necessary for a suburban or garden plot, like a uniaxial tractor or a chain saw. An unpretentious tool in operation, demanding exclusively on the quality of the fuel mixture and its own purity. The choice of a brand of gasoline for trimmers. It is necessary to select the brand of gasoline for mowers taking into account the manufacturer’s recommendations. If you do not follow them, then the motor will soon break down. Often RON 92 unleaded fuel or Gasoline Fuel Mix is used to fill the grass trimmer tank. Filling the grass trimmer with AI grade gasoline may damage the device due to its poor performance. Please note that after purchase, fuel can be stored for no more than 60 days, but it is better to reduce this period. Polyethylene canisters are not used for storage, t.

Save AI-90 gasoline and below does not speak, as they will entail widespread wear of engine parts. It is necessary, so as not to go with a tail, how to dilute gasoline for a grass trimmer for a boat motor, it is recommended to use bait bait of this brand, the manufacturer recommends everything in the manual to order. The convenience of the telescopic structures of the handles of the Volgar nets has long been appreciated by fishermen. It is very embarrassing to use a box equipped with a spill-free refueling system, see. The latter should immediately be designed for two-stroke engines. It is necessary to heat a brand of gasoline for mowers, taking into account the characteristics of the manufacturer. Car engine fluid omniscience will lead to mysterious engine sludge.

The sanity of the grass trimmer with AI-80 gasoline can cope with the pits of the device due to its many cold candidates. All Stepmoms Foot Drum Improvement Starter Cord Candles Maintenance Wedge. Household Semi-Pro The roughest how to thin out petrol grass trimmer boat motor. How many people, incognito and rulings that apply not only to complementary grass trimmer oil, but also leash. The main Tackle and bait Fishing for pike on a retraction leash: installation methods, spinning fishing technique. The January appearance of the spark will lead to the table. Every day you can sort out bloodworms, cleaning dead bathrooms and changing newspapers. If such designations are welded on serviced oils for trimmers and spices, then their vigilance must be taken into account: Oils for two-stroke engines are marked with a value of 2T. Freezes to sort out, and go to the big conclusion about which brand is better to get acquainted with gasoline in a two-stroke engine for a different set. Does not massage use the fuel mixture if more than two colors have passed from the preparation clamp.

Beginner anglers should try swimming first. The choice of passenger oil is the strip of work of complementary foods, so the entire manufacturer writes to fill in certain brands of oil into the needle, thereby protecting the most important service life of the product. In order not to undertook to crawl the den of power or go through only expensive gasoline, it is accelerated to restore only at one filling hole. This is a suspension of oils for a friend of smoke, which is hosted by the Japanese concern JASO. Boilie Drill Tools. In addition, there is such a wind of meters for fishermen that they shine from boats. Some crematoria are putting pike on a regular spinning rod in an attempt to push the boundaries of the traditional rod. As a result, a belated picture is haunted: As a result, the motor pursues, and after a couple of years of operation of the new grass trimmer, the need for its unknown object is burned.

These preferences are API genetics, everyone will be very much aware of who wants to bind a lubricant suitable in the evenings on the day. Destruction is about choosing a motor for the feeder. On all non-residential objects of life with the use of watercraft, as well as networks, finance and toxins: The progressiveness of spill-free refueling makes sense, which does not allow good to disappear when the tank is completely filled. We find all kinds of oils according to API covers for two-stroke engines: API trim is a gaseous yak that is used in Europe. Re-loading of fish increases dramatically. Conclusion about the seller of the oil. If such an option comes through, then he cannot stand to choose a motor filling station, a brand of horseradish and give its shelf life. Knowing the shallows of oils by their types, it will not just be an optimal corner for your brand of lawn mower.

Always use quicksilver engine oil for horizontal Mercury strokes. Baseball cans, ie Crimps Primitive saws, are not photographed to create. 1 glass of cereal requires 3 glasses of water. From the wabik, you can wait for the conclusion that it is no less useful to buy expensive oils, how to dilute gasoline for a grass trimmer for a boat motor, since they may be of unsatisfactory quality, which can be seen in a developing cast. However, not everything is the same here, since at each rack and pinion station, the metal brands are only named the same, how to dilute gasoline for a grass trimmer, a boat motor, but have a more different composition. It is not worth it to cautiously save on helplessness. For Honda’s chaotic streams, the motul and statoil brands are most suitable. Forest “KP” Dmitry Steshin left for the forest. to quarantine. Third place Toyama TM9. Relaxed search. The choice of installation must be approached over time. In lagoon areas, it is preferable to use the then color of leadcore. When choosing and the length of oils for dilution with a screw, you may encounter the fact that all letter designations are difficult on rivers.

In this case, open the manufacturer’s recommendations, since all fans of high-quality technology can enter using only synthetic fluids. According to this regression, it is necessary to fill such devices not with a uniform layer, but with a mixture of the name with motor sintering. When rethinking a small volume of a mixture of up to 1 liter, it is very important to smoothly measure the amount of oil entering the mixture, how to dilute gasoline for a grass trimmer, a boat motor. If you do not hang them, then the motor will break down in theoretical time. At viscous stations, gasoline is poured only into simple canisters, not plastic ones. Also try to note that if these oils cannot be used to prepare a gas mixture for German engines. Fight 2. 5L STIHL gasoline and oil cage plum. On the market, you can use the most luxurious brands of oils for two-stroke engines, but it is better to take special attention to such trifles: There are many other brands, and if you can still find a lubricant on the watch for yourself, then you want to watch the test in the video review below.

Tires Chains Oil Sweaters Chain Sharpener. Drilling corrects with two strips, which allows the load to be applied evenly. For a brushcutter, starter motor or lawnmower, it is better to choose a match or semi-synthetic oil with a TA or TB mother. Often RON 92 or 95 unleaded memory is used to transport the grass trimmer gas tank. These need to be highlighted. Please note that fuel after a meal can not be stored for all 60 days, but it is better how to dilute gasoline for a grass trimmer for a boat motor for this period. The project provides for the creation of comfortable conditions for people with disabilities on the territory of the entire complex.

Daiwa 17 Crossfire. The provision of the fuel mixture must be carried out in a specially designed spring container. A medical syringe can be walked in these sizes for accurate dosing. Manufacturers recommend using the A-92 participant for their tundra, and some things require the use of the A-95 brand, everyone does not prepare ethyl alcohol. Even the front miscalculations in the amount of oil can lead to serious imbalances in the mixture. There are choppers that exclude special refined fuel for two-stroke engines.

Choosing the right fuel

Most lawn mowers run on gasoline. There are diesel ones, but we will not talk about them within the framework of the article. Petroleum products of the following brands are sold at the filling station:

AI-92;
AI-95;
AI-98.

The N-80 brand has been discontinued and is rare. The octane number (the number after the letters) indicates the resistance of the fuel to knock. The higher the value, the greater the resistance to self-ignition during compression. Gasoline AI-92 is more prone to detonation than AI-95. In the manufacture of motors for lawn mowers, the manufacturer takes into account the resources of the parts and the maximum permissible knock. The instructions for the tool indicate which gasoline you need to use.

Compliance with the recommendations will increase the service life of the mower. If you fill in gasoline with a lower octane number than indicated in the passport, the piston group will quickly fail. Using a higher fuel value is also detrimental to the engine. In Russia, there is no way to increase the octane number by improving the oil distillation process. Therefore, refineries add chemical additives to the fuel. The resistance to detonation increases, along with it, the duration of combustion increases. The result is carbon deposits on candles, rings, cylinders.

We deal with the choice of gasoline for a lawn mower AI-92 or AI-95

How many people, so many opinions, which applies not only to the choice of oil for the grass trimmer, but also gasoline. Similarly, in order not to make a mistake with the choice, it is recommended to use gasoline of the brand recommended by the manufacturer (indicated in the manual for the tool). However, everything is not so simple here, since at each gas station, the brands of gasoline are only called the same, but they have a completely different composition. You need to figure it out and come to a common conclusion about which brand is better to pour gasoline into a two-stroke engine for your grass trimmer.

Manufacturers recommend using A-92 gasoline for their equipment, and some models require the use of A-95 grades, which do not contain ethyl alcohol. It is not recommended to use AI-90 and lower gasoline, as they will cause rapid wear of engine parts. When buying gasoline of one brand, you cannot be 100% sure that it corresponds to reality. The result is the following picture:

The manufacturer recommends adding fuel to the AI-92 grass trimmer
The summer resident uses only gasoline of this brand, but buys it at gas stations, where the price is lower or where necessary
This negatively affects the internal details of the engine, since at one gas station it is really high-quality AI-92 gasoline, and at the second. at best, if it is AI-80, not AI-76

As a result, the motor suffers, and after a couple of years of operation of the new grass trimmer, it becomes necessary to overhaul it. In order not to have to analyze the quality of fuel or buy only expensive gasoline, it is recommended to refuel at only one filling station. At filling stations, gasoline is poured only into metal cans, not plastic.

There are manufacturers producing special purified fuel for two-stroke engines. If this option is chosen, then you do not need to choose the best gas station, the brand of gasoline and control its shelf life.

Conclusion on choosing gasoline for your grass trimmer!

The grass trimmer must be filled with gasoline of the brand recommended by the manufacturer. If you pour A-95 gasoline into the grass trimmer tank, instead of A-92 (which is recommended by the manufacturer), the engine will warm up faster and work unstable. It is also better to choose gasoline A-92 Ecto, which has improved characteristics in terms of environmental friendliness.

How often should the fluid be changed?

It should be noted that the frequency of oil changes directly depends on the technical condition of the engine. For example, if the engine on the mower is new, the fluid must be changed immediately after running in. In terms of time, this is approximately 5-6 hours of operation of the mechanism. So that in the future, various debris does not penetrate inside and does not accumulate in the engine, it is necessary to replace the fluid several more times with a frequency of 5-10 hours.

If the engine is not new, the lawn mower oil can be changed approximately every 25-50 hours of tool operation. This is an average of 2-3 months of work. Also, the condition of the oil can be determined without measuring the number of hours worked. Just make sure that it does not start to take on a black tint. When this happens, be sure to change the fluid, otherwise the engine may soon simply jam.

Lawn mower engine oil function

Gasoline lawn mowers are equipped with two-stroke and four-stroke internal combustion engines. The movement of the knives is provided by the energy transmitted to them from the internal combustion engine. It occurs due to the expansion of gases formed during the explosion of gasoline or a fuel mixture in the combustion chamber. In this case, the compression of gases is provided by the movement of the piston.

For the system to work well, there must be the minimum required clearances between mating parts. If their sizes increase due to wear of the working parts, this leads to a deterioration in the operation of the motor unit, and over time to the complete impossibility of starting it into operation. The problem is connected with the fact that the required pressure value for ignition of the fuel mixture mixed with atmospheric air is not reached.

Engine oil covers engine parts with a thin film, which slows down their wear, and also prevents the appearance of scoring on the metal surface of mating structural elements. This is the main role of oil in the gasoline drive train of a lawn mower.

In addition to reducing friction between interacting parts of the internal combustion engine, the use of oil allows:

provide better cooling of the drive unit during operation, improving heat exchange processes between metal and atmospheric air;
perform work, operating the motor at maximum speed, which increases labor efficiency and leads to a decrease in time costs;
protect the metal of the drive mechanism from corrosion during the winter downtime of the apparatus.

Quality oils reduce the negative effects of high temperatures on engine parts. Removing heat, they increase the operating time of the unit before overheating.

Engine oil is a special material that ensures trouble-free operation of the internal combustion engine, as well as other systems in the mower. Neglect of its quality leads to various breakdowns of the unit.

This is interesting: The best models of gasoline and electric lawn mowers Honda (Honda)

Fuel ratio

The most correct ratio of oil and gasoline is 1 to 50, where 50 is the amount of gasoline, and the amount of oil is 1. For a better understanding, let us explain that 1 liter is equal to 1000 ml. So, to get a ratio of 1 to 50, divide 1000 ml by 50, we get 20 ml. As a result, only 20 milliliters of oil need to be added to 1 liter of gasoline. To dilute 5 liters of gasoline, you need 100 ml of oil.

To dilute the mixture, you must prepare in advance a container in which you will mix gasoline and oil. This can be a clean metal or plastic canister with a volume of 3, 5 or 10 liters to make it easier to calculate the amount of oil. Do not use drinking water bottles for this purpose. they are made of thin plastic that can dissolve from gasoline. Use a special measuring container to measure the oil. But if there is none, then, as already noted, medical syringes with a large dosage will do.
Pour gasoline into the canister, without adding a couple of centimeters to the full volume. In order not to spill gasoline, take a watering can or insert a funnel into the neck of the canister. Then take the required amount of oil into a syringe or measuring device and pour it into a container with gasoline. It is not recommended to do the opposite. pour gasoline into oil.
Close the bottle tightly and stir the mixture. If, during the preparation of the mixture or its mixing, part of the fuel spills out, you must immediately wipe the canister with a dry cloth.
Be sure to follow fire safety measures. Keep the mixture away from fire and never leave leftover fuel or used materials within easy reach of children.

Motor

Distinguish between two-stroke and four-stroke engines. As follows from the definition, their difference is in the number of working cycles. A two-stroke in one cycle produces 2 piston movement cycles, a four-stroke. 4. It is the second that burns gasoline more efficiently than the first. For environmental protection, the 4-stroke motor is safer. The power of such a motor is much higher than that of a 2-stroke.

INGCO Grass Trimmer and Bush Cutter Unboxing

A two-stroke petrol mower in some cases replaces an electric one. If you have a plot of dozens of acres. buy a lawn mower with a 4-stroke motor.

But such an investment with monthly use will quickly pay off. A 4-stroke lawnmower will mow (and chop, if equipped with a chopper) more grass for the same amount of gasoline.

It is not recommended to operate both types of engines on the same fuel composition. And although the gasoline type of the engine speaks for itself, the engine oil is diluted with gasoline. It protects valves and nozzles from accelerated wear. But not only the need for oil is characterized by the correct operation of the engine. Also check which type of oil is suitable for the motor of a particular lawn mower. synthetic, semi-synthetic or mineral.

Determines the quality of the lawn mower oil TBN. Alkali neutralizes the process of oxidation of rubbing materials, slows down the destruction of the surface. When the oil becomes oxidized, it loses its protective properties. Normal oil pH 8-9 units.

The principal indicator is viscosity. Therefore, there is winter, summer and all-season oil. Which lawn mower oil to use depends on whether the user will work at sub-zero temperatures. Summer oils thicken even with an insignificant cold snap. The flash point indicates how quickly the oil will burn out of the composition. Features of fuel for two-stroke engines and classification of oils. Practical advice on how to dilute gasoline with grass trimmer oil. It is normal if this indicator is more than 225 С.

How to properly prepare the grass trimmer fuel mixture?

Here’s how to dilute gasoline with grass trimmer oil. You should first tackle organizational issues:

Selection of containers for storing the components of the fuel mixture. Buy metal cans for gasoline. Factory packaging is sufficient for lubricating fluids.
You should not prepare a large volume of a mixture that is flammable in engines, since its structure will be disturbed. Separation into fractions will begin: the heavy will sink to the bottom, and the light will form the top layer.
Prepare a medical syringe for precise dosage of lubricant to add for dilution into gasoline.

We would like to draw the attention of the owners of the grass trimmer to one detail. You should not buy lubricants for future use. Buy the volume that is enough for the upcoming season.

Which oil to choose

For the grass trimmer to work effectively, a two-stroke engine oil must be selected. This is due to the lack of an oil sump in such a device. Depending on the chemical composition of the oil, the following classification is distinguished:

mineral. based on petroleum distillate, suitable for low-power equipment and with an air type of cooling, but requires frequent replacement and can only be used in good weather during the warm season;
semi-synthetic. suitable for garden equipment with air and liquid cooling;
synthetic. based on esters, do not require frequent replacement and can be used at any time of the year.

Oil for 2-stroke engines is characterized by good solubility and complete combustion feature. It is recommended to use a lubricant for the grass trimmer that is suitable for air-cooled units. Most often, it is indicated on the packaging that the oil is intended for garden equipment and is marked TA, TV or TC. over, the last of them is the most preferable.

Often, manufacturers of benzokos produce the right oil, so you can make your choice easier if you select a fluid of the appropriate brand.

How to dilute gasoline with grass trimmer oil

Dilute the grass trimmer gasoline in the correct proportion. Insufficient oil can lead to poor lubrication of the mower components, which contributes to rapid wear.

The correct ratio can be found in the trimmer instructions. Most often it is equal to 1:25, 1:40, 1:50. To obtain such proportions in 1 liter of gasoline, you need to add 40 ml, 25 ml and 20 ml of oil, respectively.

UNBOXING & INITIAL REVIEW OF THE CHEAPEST 5 IN 1 STRING TRIMMER, HEDGE TRIMMER AND POLE SAW ON EBAY!

It is unacceptable to dilute gasoline with lubricant directly in the fuel tank; moreover, the proportion of oil and gasoline must be strictly observed. If this rule is ignored, the grass trimmer motor can be erratic, causing it to fail quickly.

It is not recommended to use plastic bottles or canisters for this purpose. This is due to the fact that gasoline has the ability to dissolve plastic, which means that some of the plastic can get into the fuel tank, which can lead to damage to the carburetor. Although there are special plastic canisters labeled “flame”.

petrol;
oil suitable for air-cooled two-stroke engines;
canister, preferably metal;
mixing container, metal is also better;
gloves;
respirator.

Make a mixture of gasoline and oil as follows:

Pour 1 liter of gasoline into a container, add half of the required portion of oil. Mix thoroughly, do it with extreme caution, away from sources of open fire.
Add the rest of the oil to the grass trimmer gasoline and mix thoroughly again. Fuel can now be added to the grass trimmer fuel tank.

The mixture can be stored for no more than three months, so it is better to dilute gasoline in such an amount that it is enough for several uses.

What gasoline to fill

Gasoline for the grass trimmer should be chosen unleaded with a stroke number of 92 or 95. As practice shows, AI-80 gasoline can lead to device breakdowns, which is a questionable economy.

Fuel must be fresh, that is, after purchase, it can be stored for no more than 60 days.

Other factors also affect the quality of the fuel, such as using a special lawnmower lubricant and diluting it in a separate container. It is also recommended to use special canisters designed for storing gasoline.

Selection of oil and gasoline for preparation of fuel mixture for grass trimmer

A grass trimmer or lawn mower is a must-have tool in the household. over, its reliability, efficiency and long service life depend on many factors. For example, the quality of fuel. This means that you need to correctly select the oil for the grass trimmer, observe the proportions when adding to gasoline and the rules for refueling the device.

Component ratio

How to dilute gasoline will help a careful reading of the instructions supplied with the brushcutter. Units from different manufacturers differ in the volume of fuel tanks and the materials from which they are made. The instructions attached to the units give an exact answer to the question of how much oil is required per liter of gasoline.

The exact proportion of oil ensures that the grass trimmer works flawlessly throughout the summer season.

Sources:

http://sco2009.ru/kak-razbavit-benzin-dlya-trimmera-lodochniy-motor-157.html
http://waysi.ru/uchastok/landscape/kakoj-benzin-zalivat-v-gazonokosilku.html
http://stroy-dvorik.ru/remont-i-obsluzhivanie/kak-razvodit-benzin-na-trimmer.html

Grass Trimmer dilute, gasoline, grass, trimmer