How to disable the lock on a Bosch hob

Unlocking after self-cleaning

Ovens with a self-cleaning function are also equipped with a locking system. This is done to increase safety, because cleaning is usually done under high temperatures. Therefore, it is necessary to protect the owners from unfortunate events, especially when there is a child in the house.

• To begin with, you must wait until the oven has finished cleaning. Not counting that, the appliance will be locked until it has cooled to room temperature. Most ovens are equipped with a system that does not allow the door to unlock until the appliance has cooled to a non-hazardous temperature. This ingenious system allows you to avoid operating the oven incorrectly.
• To tell if the oven has cooled down, you must turn your attention to the control panel display. The flashing icons indicating lockout and cool-down indicate that the oven is still cooling. You have to wait for the oven to complete all the necessary processes.
• In the event that you urgently need to pause the self-cleaning function, you can press the cancel button. But the oven must cool down as before.

Method 1 of 3: It is usually located on top of the oven. Press “Panel Lock“, “Lock” or “Lock Control” button. Hold it down for three seconds. Wait until you hear a beep, indicating that the panel is unlocked.

Press the “Select” button until “SAFE” appears on the display. This means that the oven inhibit has been set. After this it can be switched on again.

On the Bosch maxx 5, you have to press the start/pause button and hold it for about 6-8 seconds. If the “Key” disappears from the display, the lock is off. On the Bosch WAS 20443 the same blocking procedure can be overridden in the same way. Press the start/pause button and hold it for about 8 seconds.

How else to unlock the hob

Before unlocking, press the “” and “-” buttons simultaneously. This can also help when the house has had a power outage. If the hobs are unlocked, a quick blinking signal is displayed.

To disable the hob safety lock on an Electrolux hob, you must first disable the hob itself. Then press to switch on. Then press the two buttons with the plus and minus sign. Press at the same time and hold for a while (about two or three seconds), then release.

• Press and hold for 3 to 6 seconds the “Key” button.
• If the temperature reaches 50°C, the oven locks automatically and the “LOCK” sign appears on the display.

The safety interlock function allows you to prevent the oven’s settings from being changed, or the programmer settings from being changed. To override the safety lock, press and hold the CLOCK button for 5 seconds. On the display for 5 seconds, the word Loc lights up.

Bosche induction cooktop child safety lock stuck on

To do this, you need to press the key button and wait for the stove to unlock. The main thing is that if you have a small child, do not show him how to do it. Reverse the lock is set by the same principle.

To release the lock, press the “key” button. Hold it down until the key with the text on the display goes out. You can then change the settings as required and manipulate the cart.

On Bosch ovens, the key lock is activated using the button with the key symbol. Just hold down this key for a few seconds. To unlock the hob, proceed as follows: hold down the “key” button for a few seconds until the “key” icon disappears from the display.

After connecting the hob to the power supply, the control panel is in locked state (the indicator light above the button is on). To unlock the control panel, press the key for 3 seconds. The indicator light turns off and it is possible to use the hob normally.

Press the “key” button and hold it down until the display shows “CHILD PROTECTION ACTIVE” and the [Key] symbol. This takes about 4 seconds. Now the oven does not start up again.

Switching the hob on and off is done using the main switch. Switching on: Touch the “On/Off” symbol. You will hear a beep. The main light switch and the burner lights come on.

How to unlock the schott ceran hob?

• Turn off the stove for 10-15 minutes and then turn it back on.
• If the first method does not work, press and hold down the “LOCK” button for 5 to 10 seconds. Then press the power button and hold both buttons simultaneously for another 5 seconds.

To remove the unit, press and hold the “key” button for a few seconds. until the block is removed. If this method does not work, try removing the lock by other means. Press ” ” and “-” buttons simultaneously.

• Press and hold the “key” button for between 3-6 seconds.
• In most cases, when the temperature reaches 50°C, the stove automatically locks and the “Lock” sign appears on the display.