How to enable a trimmer for Huter GGT grass.

Trimmers for Huter grass (Huter)

Electric and gasoline braids for Huter’s grass successfully combine high efficiency on the site and minimum fuel consumption. When developing each trimmer for grass, the manufacturer uses branded innovative technologies aimed at increasing endurance and comfort during operation of equipment. This makes Huter garden tools one of the most high.tech in the market, and makes it possible to successfully use them in almost any working conditions.

The German enterprise Huter is one of the most famous world brands involved in the production of high.quality household and garden equipment. The history of the brand begins in 1979. It was then that the first plant of the enterprise began to function in the German city of Nordhausen.

Since the launch of its production, the company has headed for the active development and gradual implementation of its own technologies. As a result, by the 90s of the XX century, the brand managed to enter the number of the most popular world manufacturers of electrical equipment, as well as high-quality equipment for household and economic operation.

Today, Huter is largely known for its electric and gasoline trimmers. Garden instruments of this brand are characterized by high performance, low fuel consumption and electricity, as well as ergonomics and pleasant modern design. Simplicity in operation and maintenance makes it possible to begin the use of Huter trimmers not only quite experienced, but also to beginner gardeners.

trimmer for grass gasoline Huter GGT-2500S-model parameters

This professional Huter lawn mower is included in the list of the most powerful garden tools from the German manufacturer. The model successfully combines high assembly quality, maximum endurance, which, with a relatively modest consumption of fuel, makes it possible to operate it to care for large garden areas.

The basis of the motorcycle is the gasoline 1-cylinder ICE, the volume of the cylinder of which is 51.7 cm3. An increased stroke of the standard forged piston significantly increases the supply of torque, which makes a trimmer for the grass a reliable assistant in the fight against numerous large weeds.

The factory parameters of this professional mower include:

• The power of the built.in engine is 3.3 liters. With. at 9500 rpm;
• fuel tank. 0.7 l;
• Possible coverage when mowing with a cord/knife. 43/25.5 cm;
• maximum sound effect. 96 dB;
• Weight. 7 kg.

The basic equipment of the trimmer for the grass includes a detachable bar, which can be folded for more convenient transportation or storage.

Huter GGT-1500S Instruction Instruction Institution. Page 3

Instruction Huter GGT-1500S for the device Trimmer for Garden grass contains pages in Russian.

You can download PDF file of this instruction: download pdf

Gasoline trimmers for grass are made according to the modern level of technology and the current safety standards. In order to avoid accidents and for the proper use of a trimmer for grass, do not start work without a thorough study of this instruction.

It is forbidden to use a trimmer for grass to persons in a state

physical fatigue or under the influence of alcohol, narcotic and drugs. It is also not allowed to use a trimmer for grass by children or unprepared persons.

When working with a trimmer, use protective equipment (corresponding clothes,

gloves or mittens, protective glasses, headphones, helmet).

It is forbidden to use a trimmer for grass near flammable and

explosives, with a high level of humidity, during rain, as well as at a distance of less than 15 meters from unauthorized persons.

It is strictly forbidden to use a trimmer for grass with a damaged casing or

Without that. It is forbidden to use a trimmer for grass without a silencer.

It is strictly forbidden to install metal wire, knitting needles and

other materials instead of fishing line, as well as use a cutting disk with mechanical damage.

Before starting, make sure the integrity of the trimmer for the grass. The cutting disk must

When working, choose the right position, your unstable position

Do not leave the included trimmer for grass unattended. 9. Do not remove the lid of the fuel tank when the engine is running. If with

Fuel filling the tank will spill, be sure to wipe the spots of the fuel with a dry cloth and change the place before starting the engine.

Do not use the fuel mixture to clean the trimmer for grass. eleven. Any maintenance and replacement measures are carried out only when

Follow the working state of the trimmer for the grass. In case of refusal, noise,

vibrations, knocking, sparks, flame, jamming or other signs of a malfunction immediately drown out the engine.

It is forbidden to carry out any changes in the design of the trimmer for the grass, violate

The integrity of the case, try to open and independently repair a trimmer for grass.

It is forbidden to drop and throw a trimmer for grass. fifteen. It is allowed to mow only during daylight or in powerful light. In

Advantages and disadvantages

You should say a little about the strengths of the gasoline trimmers of the aforementioned manufacturer. The main ones can be called the following:

• the presence of a two.stroke engine with a capacity of just more than 3 horsepower, which has air cooling and electrical firing;
• A tank made of translucent plastic, which allows you to know exactly how much fuel was spent during operation;
• The opportunity for a person to work comfortably. this is achieved due to the presence of an ergonomic handle according to the type of bicycle and a special mechanism of extinguishing various kinds of vibrations;
• A high.quality cutting set in the form of a cutting knife and fishing line of high strength is used here;
• There is also a wide capture when running. 25.5 centimeters, which makes it possible to effectively and quickly mow grass, shoots and other greens;
• a protective casing that protects a person from the ingress of mowed grass, stones and a variety of garbage;
• shoulder belt that allows the operator to work for a long time and not feel fatigue;
• Simplicity of service and work. the principle of operation and the device of models from Huter are very simple, which will easily understand their use even an ignorant person;
• Reliability-such a gasoline trimmer for grass can work for a long period of time without stopping, while it does not heat up due to the features of the air cooling system;
• the possibility of unhindered movement around the site. given that gasoline trimmers for grass, unlike electric ones, are completely independent of the presence of a socket, which guarantees a person freedom of movement.

At the same time, there are a number of shortcomings that cannot be mentioned, namely:

• noise during work. gasoline trimmers for grass not only from Huter, but generally vibrate quite strongly and publish a strong noise, which creates uncomfortable working conditions;
• Contamination of nature. models working on fuel, during operation form various kinds of exhaust gases, which harm the environment;
• High cost. trimmers for grass of the described type have high cost due to the fact that they have high performance and good technical characteristics.

In the context of the above, it is safe to say that such devices have more advantages, which means that their use is justified.

Popular models

If we talk about the most popular models of this German company, then you should first call GGT 2500S. This equipment is considered one of the most productive models and has excellent technical characteristics. Its use makes it possible to process large areas and use it both in everyday life and for professional purposes. Its features are as follows:

• a two.stroke engine with an air cooling mechanism;
• electronic ignition;
• power. 2.5 kW;
• has a vibrational suppression mechanism;
• can make a bevel of 25.5 centimeters width.

Another interesting model that may interest many. GGT 1000S. It can be used for professional purposes. It has such basic features as:

• a two.stroke motor, as in the previous model;
• electronic ignition;
• performance. about 1000 watts;
• can produce a bevel in width 25.5 centimeters;
• Its turns. up to 9.5 thousand per minute.

GGT 1300S will also be interested in many, because it is a powerful and productive trimmer for grass, which will cope with any type of vegetation. It is equipped with a vibrational suppression mechanism, as well as the lock key and the gas handle lock for gas. It has the same features as previous models, except that the power here is higher. 1300 watts.

Another gasoline trimmer for grass from Huter, which deserves attention. GGT 1500T. High power allows you to carry out almost any task. The model works on one of the most productive engines models, which allows you to carry out simple cutting of literally any thickets, young shoots of trees, as well as thick weeds. It has an anti.vibration mechanism, a convenient shoulder strap, as well as a manual launch mechanism. This model differs from the previous ones by the presence of a more productive model of a 1500 W engine, as well as in that it makes less noise.

The last model I want to say. GGT 1900S. It is the second most powerful in the line of this manufacturer with an indicator of 1900 watts. The engine installed here was specially designed for GGT 1900S. Its other features are the presence of an anti.vibration mechanism, as well as the possibility of regulating the position of the handle for a more convenient capture. In addition, a special protective casing includes the configuration.

User manual

If you get acquainted with the user’s management, you can understand that you should not trust the trimmer for the grass to persons who are under the influence of alcohol or physically tired. This significantly increases the risk of injuries. You yourself need to use protective equipment when working with a trimmer, among which:

The Huter GGT-2500S device, the price of which was mentioned above and acceptable for most consumers, should not be used near explosive and flammable substances, as well as in high humidity and during rain. From unauthorized persons when working, it is necessary to retire by 15 m or more. Use equipment with a damaged casing or without it is prohibited at all, as without a muffler.

It is forbidden to use metal wire, knitting needles and other materials instead of fishing line, this applies to the cutting disk that has mechanical damage. Before starting, it is important to verify the integrity of the equipment. The cutting disk should rotate freely.

During the operation of the Huter GGT-2500S, the characteristics of which were mentioned above, it is necessary to take a convenient pose, since an unstable position can cause injuries. The inclined trimmer for the grass is not allowed to leave unattended. With the engine running, you can not remove the fuel tank cover. If the fuel spills when filling it, then the stains must be wiped with a dry cloth, and before starting the engine you need to change the place.

Additional recommendations for use

To clean the trimmer for grass, the fuel mixture cannot be used. It is recommended to replace spare parts and maintenance of equipment when the engine is turned off. It is important to monitor the working state of the technique. If during operation you heard uncharacteristic noise, knock and vibration, then the engine must be immediately drowned out.

You should not change the design yourself, as well as open the housing, as well as repair equipment. The Huter GGT-2500S gasoline trimmer should not fall, during a long mowing, the manufacturer recommends taking breaks.

Choosing a brand of gasoline for trimmers

You need to select a brand of gasoline for motorcycles taking into account the recommendations of the manufacturer. If you do not follow them, then the motor will soon break. Often for refueling a gas tank of a trimmer for grass, unhealthy fuel with an octane number of 92 or 95 is used.

Trammering a trimmer for grass with gasoline AI-80 can lead to breakdowns of the device due to its low technical characteristics. Keep in mind that after the purchase you can store fuel no more than 60 days, and it is better to reduce this period.

Polyethylene canists are not used for storage, t. to. In contact with the internal walls, static electricity will occur. The accidental appearance of a spark will lead to an explosion. Although, there are special canists of plastic with the marking “Flame”.

Alternative solution. lawn mower

If you do not want to consider a trimmer for the grass of the Huter GGT-2500S brand, the reviews of which are presented above, then you can get acquainted with some lawn mowers from the same manufacturer. Among others, the ELM-1400T model is presented for the sale, this equipment option provides a capture width of 38 cm and can be used for areas whose area reaches 400 m2.

The design is equipped with a soft grass collector by 35 liters, where mowed grass gets. This Huter lawn mower has an electric motor, which works with a low noise level. Transportation and storage are simplified thanks to the folding handle. Another lawn mower from this manufacturer is the ELM-1100, it costs 3826 and is equipment for an intense lawn haircut in a garden area.

How to start a trimmer for Huter grass correctly

How to start a trimmer motor for grass or lawn mower?

The new trimmer for the grass is simple in commissioning.

• Check the type of device motor. Trammers for grass are equipped with a 2- or 4-stroke engine.
• Buy oil for this type of motor. Gasoline for a trimmer for grass-AI-92/93/98, is sold at all gas stations.
• Mix oil with gasoline. Mineral oil is mixed in a ratio of 1: 34 with gasoline, synthetics. in 1: 50. Follow the tips of the trimmer manufacturer for the grass for the viscosity of the oil (see. label on the flask). often use all-season oil 5W-30. Do not use unverified car.
• Pour a small amount (for example, 0.5 liters) of the resulting fuel in the tank.
• Close the air conditioning by shifting the suitable lever (see. annotation).
• Turn the ignition key (or handle) to the “inclusive” position. without this, the trimmer will not start for the grass. Newcomers often make such a mistake.
• Skip a little fuel in a carburetor. if there is a manual “rocking” with a separate button or lever (see. annotation). We need 4-7 presses.
• Install Trimmer for grass On a flat surface.
• Carefully pull the starting cord until you feel its brake. Then abruptly pull it out, but not quite. Repeat this movement before 4 times.
• If the engine does not start, open the air damper again, it will flood the candles with a different gasoline during subsequent movements of the cord. Make 2-3 samples to start an open handbrake motor.
• If the motor does not start, close the damper and make a few more attempts to it Bind.
• After starting the engine, click on the gas lever, turning on the idle.

How to start a gasoline Trimmer for grass?

How to start correctly Trimmer for grass. the question that the owners are puzzled in the event of a breakdown of the device. And after the successful repair of the trimmer for the grass, the owner tries to avoid repetition of the same situation.

Starting the lawn mower for the first time or after a long downtime

The lawn mower differs from a trimmer for the grass in that a fishing line for a trimmer, but a mechanical gearbox or winch based on the gear equipped with a knife, acts as a cutter for grass. The knife drive is much more powerful than the forest mechanism. a powerful lawn mower is also used when cutting the bushes. Both Chinese and European law mmores do not differ in anything special when the declared capacity is real.

For lubrication of gear gears, Litol or solidol is used. Having checked the gearbox, prepare for the work and the engine itself. according to the above instructions. If the start has failed, the problem is already in the engine.

Prerequisites

The reason for which the trimmer for grass fails may:

• tank overflow;
• excessive fuel pumping into engines equipped with manual supercharger;
• wear in the motor of valves, cylinders, nozzles, fist pushers and other mobile parts;
• In the tanks, gasoline and/or oil ended;
• not in order of the spark plug;
• clogging of fuel or air filters;
• the valves in the motor were resolved or burned.

Fuel pouring through the openings for candles

If there is no manual pumping on the engine of the trimmer for the grass and the device did not start, pour a little fuel into the motor itself through candle moves. Make the following.

• Check if the fuel level is sufficient in the tank for draining a small amount of it. It takes only 20 ml.
• Remove the cap from the candle and unscrew it with a candle key.
• If the candle is polluted on the former use of the trimmer, rinse and buy it. There should not be any deposits on the electrodes of the candle. Do not damage the ceramic insulator of the central conductor. In the new trimmer, check the candles for the factory defect.
• Return the candle back and check the spark look (category between electrodes) when the starter triggers.
• Remove the candle again. Using a 20- or 50-cup syringe, pour 20 ml of gasoline into a candle hole from under a candle.
• Insert and fix the candle by setting the magnitude of its technological clearance at least and no more than a millimeter.
• Skip fuel using a button (or lever) of swinging. if it is on your model of a trimmer for grass. Press the button every 4 seconds.

Now try to start the motor. Close the air conditioning immediately after starting.

The main thing. Fuel mixture!

In this case, the remains of plastic plastic dissolved in the brutal environment are created in the combustion chamber so terrible things that you will definitely not be able. But you certainly remember how to store fuel forever.

What to do when the fuel was definitely normal, there is a spark, but a trimmer for grass does not start a gasoline? It is possible that you just flooded the candle with gasoline. In this case, it must be turned out, wiped with a clean rag and dry. By the way, it will be completely useful to check the candle for performance itself.

The carburetor of the lawn mower floods.

How can you drown the engine on a gas tank, to be inattentive. Just one awkward movement

After several jerks, he will start and stall, which is a normal phenomenon. Putting the damper to the working position, start the tool again and start working.

Why not start Trimmer for grass. the reasons

To determine why gasoline Trimmer for grass It is poorly started or constantly stalls, it is necessary to sequentially check the work of all the main components of the unit. It is especially important to do this after a long.term storage of a lawn mower. So, the main reasons for such a trimmer’s behavior for the grass are as follows:

• The culprit that the lawn mower is not started, there may be a poor-quality oil-Benzine fuel mixture. It must be prepared strictly according to the instructions. The savings here are not at all appropriate, since it can lead to the failure of the entire piston group of a trimmer for grass. Do not cook too much fuel mixture, as excess gasoline will lose their qualities over time.
• You should know that gasoline trimmers for grass of stamps such as STIHL, Husgvarna and some others do not start if they are filled with cheap gasoline with a small octane number. Therefore, for such units, it is necessary to use only high.quality high.octane fuel.

How to start a trimmer for grass gasoline Huter

How to launch a trimmer for grass. This is a question that the owners confuse in the case of failure of the device. And after the successful repair of the trimmer for the grass, the owner tries to avoid repeating the same situation.

The reason for the failure of a trimmer for grass is possible:

• Tank overflow;
• Excessive fuel injection into engines with manual supercharger;
• Wear in the engine of valves, cylinders, injectors, fist pushers and other moving parts;
• Gasoline and / or oil end in tanks;
• The spark plugs failed;
• Fuel or air filters are clogged;
• Incorrectly spelled out or burned valves in the engine.

The test begins with the presence of oil and fuel in both tanks and a small part in the engine system. The “empty” engine will not start, despite the full tank, and also overflow.

How to start a three.dimensional motor or bush?

The new trimmer for the grass is simple during commissioning.

• Check the type of engine engine. Trammers for grass are equipped with a 2- or 4-stroke engine.
• Buy oil for this type of engine. Gasoline for a trimmer for grass. AI-92/93/98, sold at all gas stations.
• Mix oil with gasoline. Mineral oil is mixed in a ratio of 1:34 with gasoline, synthetic. At 1:50. Follow the recommendations of a trimmer manufacturer for grass regarding oil viscosity (see. Label on the flask). The most commonly used polyhedral oil. 5W-30. Do not use unverified motor oils.
• Pour a small amount (for example, 0.5 liters) fuel into the tank.
• Close the air damper, moving the desired lever (see. Instructions).
• Turn the ignition key (or handle) to the “inclusive” position. Without this, the trimmer for the grass will not start. Beginners often make this mistake.
• Download a little fuel to the carburetor. If there is a manual “rocking” with a separate button or lever (see. Instructions). 4-7 clicks are required.
• Place a trimmer for grass on a flat surface.
• Gently pull the starter cord until you feel its braking. Then pull it sharply, but not completely. Repeat this movement up to 4 times.
• If the engine does not start, open the air damper again, otherwise the spark plugs are filled with gasoline during subsequent movements of the cord. Make 2-3 attempts to start the engine with an open manual brake.
• If the engine still does not start, close the shutter and make a few more attempts to run it.
• After starting the engine, press the throttle lever to activate idle.

Let the engine warm up. 5-10 minutes enough. Do not start mating grass immediately after a cold launch. The engine of the trimmer for the grass should start.

Starting the brush for the first time or after prolonged downtime

The lawn mower differs from the trimmer for the grass in that the lawn mower. This is not a fishing line for a trimmer, but a mechanical gearbox or a winch with a gear, equipped with a knife. The knife drive is much more powerful than the carriage mechanism. When cutting bushes, a powerful bush is also used. Both Chinese and European law mowers do not differ when the declared capacity is real.

Litol or solid oil is used to lubricate gears gearboxes. After checking the gearbox, prepare for the engine itself. In accordance with the above instructions. If when starting, a failure occurs, the problem is already in the engine.

Share fuel through the spark plugs

If there is no manual pumping on the engine of the trimmer for the grass, and the device does not start, pour a little fuel into the engine through the spark plugs. Make the following.

• Make sure that the fuel level in the tank is sufficient to drain a small amount. It will take only 20 ml.
• Remove the lid from the spark plug and unscrew it using the spark plug for a candle.
• If the candle is contaminated with the used trimmer, rinse and bake it. There should be no deposits on electrode electrodes. Do not damage the ceramic insulator of the central conductor. In the new trimmer, check the spark plugs for factory defects.
• Turn the spark plug back and check the ignition (discharge between the electrodes) when the starter lights up.
• Remove the candle again. Using a syringe with a volume of 20 or 50 cm3, pour 20 ml of gasoline into a hole for the spark plug.
• Insert and secure the spark plug, setting the value of its technological clearance at least and no more than a millimeter.
• Pour the fuel with the shift button (or lever). If this is in your model of a trimmer for grass. Press the button every 4 seconds.

Now try to start the engine. Close the air damper immediately after starting.

Checking the ignition system

If the trimmer for the grass has already been used, check the condition of the removed (currently) spark plugs, replacing it with any other. If, for example, when checking the spark plug, the ceramic dielectric broke, the electrodes bent, buy one, guided by the product code knocked out for the parts itself, and check it with a marker in the instructions at the trimmer. A spark plug without a insulator and / or with curved electrodes will not give normal sparks when triggered.

If the spark plugs are in order, but the fuel sparking is not observed, check the ignition coil with an ohmmeter (multimeter). Lack of indications (infinite resistance) is a sign of winding winding. If it sins from overheating due to a short circuit, the voltage for the spark malfunction will be insufficient.

Since he uses a very thin wire that converts 12.6 V from the battery of 30,000, it is very difficult to fix (rewind) even in the garage. The coil should be replaced.

Additional elements

The fuel mixture is poured into a special reservoir, which is a tank of translucent plastic, with a capacity of 700 milliliters. Additionally, the Huter GGT 1000S mitch engine is equipped with a muffler and air filter. The connection of the motor and rod is carried out by means of the centrifugal coupling and the vibration display block.

An angular gearbox is provided at the bottom of the bar, which serves to control the change in the direction of the axis during the rotation of the barbell. This approach allows the operator to support the working plane in a horizontal position. The cutting tool is fixed directly on the gearbox.

Principle of operation

Such a spare part HUTER GGT-1000S, like a semi-automatic coil with a fishing line, is used if you need to cut fresh and not rough grass. The inner part of the coil contains a certain supply of a polymer string supplied as it grows down or break.

To add cutting ends, just lightly hit the lower part of the soil unit. At the same time, you do not need to stop the work of the tool. A three.lobed steel knife is suitable for working with rude and dry thickets. To protect the operator and surrounding people and animals from particles of weeds, small stones and flying land will allow a special safety casing.

To increase the convenience of control, the presence of a bicycle handle is provided, on which all the necessary control buttons are located. This equipment, according to buyers, is used to cut grass in personal plots. The design is durable, it is designed for intensive and long.term operation.

Reviews about the main features and advantages of the model

If you are considering a trimmer for the Huter grass, the reviews of which were presented above, then you should also pay attention to the opinion of users regarding operational features. Of these, you can find out that the tool provides accuracy, comfort, safe operation, and also guarantees strong retention of the device. The control is that the fuel tank is made of translucent material, thus, the consumer can monitor fuel consumption. But the comfortable holding of the tool is guaranteed by a bicycle handle, which consumers really like. She, according to their words, provides long and comfortable work. Safety is provided by a protective casing, which eliminates the entry of mowing grass in the operator.

This trimmer for the Huter grass, the reviews of which are often the most positive enough, has, according to consumers, and other advantages, among them should be highlighted:

• vibration extinguishing system;
• design strength;
• long service life;
• the location of the control elements on the handle;
• Light start.

The Huter 1900 trimmer has a fairly impressive power, which is 1.9 kW. As a cutting element, a knife or fishing line for a trimmer is used. The tank capacity is 0.7 l, and the thickness of the fishing line is 2 mm. Before acquiring this equipment, you must consider that its weight is quite impressive. This is claimed by many novice users. The mass of equipment is 7 kg.

Trimmers for Huter grass. Instructions and manuals

To view the instructions trimmers for Huter grass, select the necessary model from the list below or for convenience use the search. All operating manuals are presented in Russian or schematically. After switching to the model page, please wait for the download instructions for use or download it to your device. You can ask the remaining questions in the appropriate form on the page.

We constantly replenish our catalog with new instructions and manuals so that you can find the necessary model of the device and get acquainted with it online or download. All guidelines for use and operation are presented in Russian if you have not found the answer to your question, do not hesitate to ask it in the Комментарии и мнения владельцев.