How to grease the stihl gas station gearbox. How to replace a trimmer gearbox for grass: an algorithm of action

How to lubricate a trimmer gearbox for grass

Famous firms produce their own production:

• For gearboxes, Motokos recommends using the transmission lubricant of the Stihl Superlub FS, is available in tubes from 250 g to 80 with a special pointed tip for convenience of bookmarks, has silver. orange color;
• The manufacturer recommends the motorcade gearbox to serve the lubricant of its own production based on lithium components in the name of the Arsenal AR-417;
• Huter for its products offers a rezoil plastic universal lubricant, cyatim, you can also apply all the above lubricants;
• In all cases, it is necessary to monitor the state of the gear node, lubricating it no less than once a month. At the same time with lubrication of gears, you can grease the drive shaft itself.

How to lubricate an underlying gearbox, you can find out by watching from the video below.

Lower gearbox

Stihl lawn mowers are well.deserved popularity

The second class belong to universal medium.power units up to 2.2 liters.With., intended for field and landscape work. In such designs, a straight hard shaft is used, which allows you to equip this class with saw steel knives for nozzles with help which can be cut down by shrubs and small trees. The design provides for a conical served gearbox. What lubricant to use for the reducer of the lawn mower. A special, under the brand name is the name “stihl” or ordinary lubrication of lip.

Engines from 6.3 to 8 liters.C is intended for professional use in forest or horticultural farms. The name of them is black cutters, these are the most powerful motorcycles for working in large areas, cutting small shrubs and trees. In the arsenal of a working tool there are saw wheels for cleaning bushes with a diameter up to 7cm. Bigorezes are equipped with an anti.vibration system, thanks to which working with such a tool becomes more comfortable. What lubricant to lubricate the gearbox of the lawn mower with powerful drive mechanisms, the lubrication of the Reducer of the Stihl lawn mower is carried out by a special proprietary or grease “STIHL” or production of Litol 24.

Lubricant for a trimmer gearbox for grass: which one to choose?

Currently, a wide selection of plastic lubricants, which are designed to reduce friction and overheating of the rubbing parts are presented on the market for gas.tools and consumables. Therefore, every owner, when maintaining the time of maintenance, is faced with a problem than to lubricate a trimmer gearbox for grass for long.term work. For these purposes, special plastic pastes are used, which vary in properties and manufacturer.

Lubrication for famous brands of trimmers

Each brand for the manufacture of gasoline trimmers always recommends a lubricant for the gearbox of the lawn mower of its own production.

• Husqvarna. This Swedish manufacturer recommends using a plastic lubricant of the Multi-Purpose Grease Grasa Universal. This material is available in tubes of blue-black color with a volume of 225 or 250 grams. According to the company, this lubrication of the gearbox trimmer for the grass was designed specifically for the Husqvarna technique, taking into account the steels and speeds used.
• Stihl. For the STIHL gas station FS, the manufacturer advises using the transmission lubricant of the Stihl Superlub FS, offered in tubes 225 grams or a one-time container of 80 grams of silver-orange.
• Patriot. The gearboxes of the motorcycle of this brand are recommended to be served by the original Arsenal lubricant AR-417. It is specially designed for gearbox gearboxes operating at high rotation frequencies and temperatures.
• Huter. For conical transmission of the tool models of this company Huter, you can use any of the above grades of transmission lubricants, as well as universal types of Rezoil, Cialitia and others.
• Champion. In the operating manual, Champion Motokosovs include Champion Super-Lube EP-O. The material is supplied in a jar of 250 grams or in a disposable oil Premium Champion C1104.
• Makita. This Japanese manufacturer advises its consumers to use the proprietary grease of Makita, which comes in white tubes with a red cover of 65 ml and 80 ml.

Factors for the choice of lubrication of the gearbox Motokosa

Often, the owner of a particular brand of gasoline trimmer for grass does not have the opportunity to purchase a lubricant recommended by the manufacturer for any reason. In such cases, a search will be required, which in its properties will be identical to a proprietary paste

Therefore, when choosing a paste for the gearbox gearbox, attention should be paid to the following factors:

• The viscosity of the lubricant. All pastes presented on the market are divided into three main groups, namely: high.speed (contain additives), solid lubricants (softened during the operation of the unit) and universal plastic compounds.
• The intensity of lubrication consumption. This factor is taken into account based on the personal experience of the owner, and is characterized by a period between two lubrications. Most manufacturers regulate the service of the gearbox every 20-40 hours of work.
• The degree of adhesion to the details of the gearbox. This indicator is characterized by a clutch of plastic lubrication to the metal knot of the trimmer for grass.

Reducer device trimmer for grass

The gearbox of a trimmer for grass is a node that transfers the rotational movement of the engine shaft to the knife or fishing line. It is located on the lower end of the motorcycle rod. The gear node is also designed to lower the engine speed of the trimmer for grass.

The mechanism consists depending on the model of the motokos of several gears rotating at a high speed. As a result of this, they heat up due to severe friction. If the lubricant is not enough, or it is not at all, then the process leads to a strong overheating and failure of the parts, and, accordingly, the need to carry out a difficult repair. So that this does not happen, lubricate the gear node in time. Misused gearbox is presented in the photo below.

The reducers of modern trimmers of different models from various manufacturers differ from each other by the design and the size of the seat. It happens:

Motokos is equipped with gearboxes with different types of gears:

• conical;
• worm;
• spiroid;
• cylindrical;
• planetary;
• wave;
• combined.

Drive shaft and gearbox are very loaded nodes of a trimmer for grass, which are largely susceptible to wear. Between them, the movement is transmitted due to the adhesion of the teeth of the gears located at different angles to each other. Effective gear works only if there are no mechanical damage. In this case, the mechanism should not overheat, otherwise its jamming may occur.

Rod and the drive of the working body

The bar has two very fundamental functions: 1st-forms a hard frame of the entire structure, 2nd-snitches of an iron hollow rod passes the shaft, which connects the working body to the engine. By the appearance of the rod, you can find the class class, if the bar is curved, this is comfortable for work, but in this case, the drive is a flexible shaft, which cannot convey a large torque. If the rod is flat, the snuts pass the hard iron rod, it can transmit more reliably and a torque. Therefore, the profile tool always has straight rods.

Sometimes with intensive mowing of grass, a trimmer for grass begins to gingern and make unpleasant sounds, which indicate the lack of reducer lubrication. This node is considered the most loaded, and therefore wears out faster. If it is not lubricated in a timely manner, then soon the drive can jam!

The algorithm for self.lubrication of the gearbox

To make lubrication of the gear ratio, its preliminary disassembly is not needed. A special hole for these purposes has already been laid in the device (it is shown in the photo below)

In addition to gears, when lubrication, you need to pay attention to such elements of the mechanism:

Pour oil or apply solid grease through a tavniper closed by a screw. At the same time, they perform actions in the following sequence:

• The gearbox body is cleaned of dirt and adhering grass, especially thoroughly the plot around the plug so that the garbage does not get inside the mechanism;
• Using the appropriate tool (often it comes with a trimmer), the cork is unscrewed;
• The selected lubricant is introduced from the tube into the open technological hole, or using the syringe, as shown in the photo further;
• screw the cork in place.

When making lubrication, you need to rotate the knife so that it is evenly distributed through the teeth of moving gears.

If for any reason the gearbox needs to be disassembled, then the old lubricant must be completely removed from the entire surface of the gears and housing, shaft, and only then use the new. The disassembled mechanism is conveniently lubricated with solid compositions.

The entire reducer lubrication process is demonstrated in the video:

Lubricating the gear node is required at least once during the year, but it is recommended to do this every 20 hours of intensive use of motorcycles. If the first signs of malfunctions with the mechanism appear, then you need to make lubricants as quickly as possible.

Used types of lubrication

When choosing lubrication, it is necessary to take into account the following factors:

Famous manufacturers, for example, STIHL, Husqvarna and others, in addition to trimmers, produce lubrication for them. Such products not only reduces wear, but also protects the metal of gears from corrosion. Therefore, for motorcycle from these brands, it is better to use their lubricants.

If the composition used for lubrication has good adhesion, then it is practically not squeezed out of the gearbox through the gaps.

For different models, lubrication is consumed in different ways. This is determined largely by the intensity of the use of motorcycles and heating the transmission mechanism. It is believed that the lubricant is enough if the temperature of the gearbox during operation does not exceed 40 ° C.

By consistency, lubricants for a trimmer for grass can be:

In terms of composition, the following types of lubricants are in demand:

• graphite, significantly reducing friction, as a result of which the rotation of the gear improves;
• lithium, which are also an excellent anti.corrosion composition, saturated with increasing the wear resistance of metal with additives without harmful substances;
• universal, containing high.degree mineral oils and improving operational characteristics components.

An example of suitable lubricants are: Champion EP-0, Gear Grease Oregon, Oleo-Mas, Azmol 158, Litol.24

You should also pay attention to the advice of manufacturers on this issue and use the materials they offer. You can buy them at specialized retail outlets

A lubricant Champion EP-0 Universal 120 gr

Prevention of breakdowns

To avoid breakdowns and subsequent expensive repairs, it is recommended to comply with a number of simple operating rules for a trimmer for grass

• Lubricate this garden tool immediately after purchasing. before starting operation. Usually or huter) applies only a small amount of lubricant, which is enough only for running.
• At the end of the season or before a long.term storage of a trimmer for the grass, you should disassemble, check the condition of the bearings and gears, grease the knot.
• It is required to add grease after the tool works from twenty to forty hours. With intensive loads, this time is reduced to twenty hours.
• Change grease to a new one is necessary when repairing a structure or before the start of the season.
• Когда редуктор перегревается или издает сильный шум, нужно проверить наличие смазки. If it is present in sufficient quantities, it is recommended to replace it completely with another.

So, you can carry out repair and lubrication of the gearbox Motokosa yourself at home. The addition of lubricants will not be difficult, a detailed description of this process and recommendations for the choice of a suitable substance can be found in the instrument operation instructions or on the video, which many are presented on the Internet. Most of the breakdowns of gearboxes are typical for trimmers of different brands, it is quite easy to eliminate them if you know the correct procedure for actions. And in order to avoid their appearance, it is enough to observe simple operating rules and conduct timely maintenance of a trimmer gearbox for grass.

Removing the handle

Direct disassembly of the STIHL 180, begins with the removal of the handle, which is attached to the chainsaw housing using three rubber shock absorbers. To remove, it is necessary to remove the plastic plugs from the inner cavity of shock absorbers, after which with the help of a powerful screwdriver, squeeze the upper shock absorber first, then the one which is closer to the posterior handle.

A gas trigger is installed in the back of the handle, which is connected to the carburetor through the wire traction in order to disconnect the thrust from the gas trigger, it is necessary to unwind two screws and disassemble the handle.

When the handle remains on one shock absorber, it is necessary to turn the chainsaw housing from the inside of the handle and breaking to the side, remove the case from the last elastic band.

Lower gearbox

Stihl lawn mowers are well.deserved popularity

The second class belong to universal medium.power units up to 2.2 liters.With., intended for field and landscape work. In such designs, a straight hard shaft is used, which allows you to equip this class with saw steel knives for nozzles with help which can be cut down by shrubs and small trees. The design provides for a conical served gearbox. What lubricant to use for the reducer of the lawn mower. A special, under the brand name is the name “stihl” or ordinary lubrication of lip.

Engines from 6.3 to 8 liters.C is intended for professional use in forest or horticultural farms. The name of them is black cutters, these are the most powerful motorcycles for working in large areas, cutting small shrubs and trees. In the arsenal of a working tool there are saw wheels for cleaning bushes with a diameter up to 7cm. Bigorezes are equipped with an anti.vibration system, thanks to which working with such a tool becomes more comfortable. What lubricant to lubricate the gearbox of the lawn mower with powerful drive mechanisms, the lubrication of the Reducer of the Stihl lawn mower is carried out by a special proprietary or grease “STIHL” or production of Litol 24.

Engine starting

ICE of household braids are equipped with manual starters. The starter device is simple: a strong cord is wound on a drum that is directly or through a reducer with a crankshaft, the launch is carried out with a sharp stretch of the cord, while the drum is spent, driving a crankshaft, which in turn leads to the launch of the engine. complex models are equipped with a light launch system Flash Starter. This system provides a special clumsy spring, which is twisted through the ratchet by several stretching over the launch cord, accumulating kinetic energy. After that, a special vacation button is released from the latch, the spring is spent with the drum and crankshaft. “Light Start” provides faster launch and less energy consumption of the owner. Also, for quick starting, an additional fuel supply is provided to the carburetor with a special button. To serve an additional portion of gasoline, click on the button once. twice. The reducer of the starter with oil designed to lubricate the gearbox is lubricated.

How to lubricate the gearbox gearboxes

Buying any equipment in its kind is a lottery, but much also depends on the gardener. In caring hands and Chinese samples serve for a long time and do not let their owners at the wrong time. And if you forget to lubricate the motorcosa gearbox in time, do not clean filters, use cheap low.quality gasoline, then garden equipment from the most eminent brands will be a headache.

Lubrication of the gearbox Motokos is one of the most important elements of maintenance of a gasoline trimmer for grass, which the user should be carried out directly.

Time and procedure for the prevention of the gearbox

I recommend that the prevention of a new gasoline trimmer for grass immediately after purchase, with the addition of lubrication in the gearbox. For all the high cost of garden technology, some manufacturers save and lay lubrication only at a minimum, for the duration of the run.in.

How often to lubricate the gearbox motokos

Often, a preventive inspection of the transmission with the addition of liquid consistent lubrication is carried out once a year at the beginning or end of the season. If the gasoline trimmer for grass is used not in professional volumes, this is enough.

With large volumes of the mowing, lubricate the motorcosa gearbox every 20-50 hours of work. If the conditions of the operating mode of garden equipment are difficult, for example, a large field is pumped out at a time, and at the same time the lawn mower does not have time to cool down, or cheap lubricants are used, then the lubricant must be checked and added every 20 hours of work.

Indirect evidence that it is necessary to lubricate the gearbox to overheating or increased noise of the node.

I also recommend a complete replacement of lubrication, with disassembly and flushing of the node, when buying a used gasoline trimmer for grass.

Lubrication for gearbox of gasoline trimmer for grass

Assortment of lubricants for garden technology

According to the instructions for lubricating the conical gearbox, a special transmission liquid consistent grease should be used. As a rule, manufacturers of garden equipment produce and recommend the chemistry of their brand as the most adapted to their devices.

At the same time, to reduce the cost of the operation of garden equipment and increase the attractiveness of a brand of auto chemistry, grease for garden equipment usually produces multifunctional. It is intended not only for lubricating gearboxes of gasoline trimmers, but also for processing hoses, transmissions and gearboxes of any garden equipment and mechanical devices operating under high loads.

Such lubricant for the gearbox is sold in the tubes convenient for use and subsequent storage.

Even if a specialized lubricant for the gearbox was almost completely developed during operation, the additives still create an effective lubricating protective film on the surface of the gears.

It should be noted that many owners of the motorcycle in the vast CIS for lubrication of the gearbox use ordinary litol-24 or lubricant for Circus on a lithium basis. It is convenient to refuel the gearbox using a 5-cc medical syringe.

A undoubted plus of the use of lithola and lithium.based lubricant for refueling the transmission of motorcycles is a reduction in operation. But there are nuances because of which spears are breaking on the forums of the Internet gardeners. My thoughts on the topic, what can be lubricated with lubric.based lubricants, and what is not read in the article “Litol as lubrication of the motorcosa gearbox”.

How to lubricate the motorcosa gearbox, gasoline trimmer for grass

Side Bolt on 17 on the gearbox of a gasoline trimmer for grass

In order to avoid random launch, all preventive work on a motorcycle is necessarily carried out with a removed electric cap / plug from a candle. Do not turn the trimmer for the grass to avoid gas leakage.

We unscrew the side screw on the motorcosa gearbox. Depending on the company.manufacturer of a garden tool, instead of a screw for a hexagon, there may be a turnkey bolt, more often at 17. The thread is ordinary, unscrew counterclockwise. Do not lose the sealing puck.

If the lubricant is not visible on the internal end part of the screw, then it is necessary to add 3. 4 grams. Scroll through the gear with your hand, changing the direction of rotation so that the lubricant is distributed through the gears.

Then set the screw in place, tightly tightening it.

Adjustment and repair of the carburetor of the lawn mower

The trimmer for grass does not apply to complex household appliances, because most of its breakdowns are mechanical and are quite successfully eliminated with their own hands. Even if the motor refuses for severe reasons. damage to the piston ring, for example, the repair is reduced to the substitution of the part.

And with a relative design, such a device of the device as a carburetor needs to be adjusted.

Removing the handle

Direct disassembly of the STIHL 180, begins with the removal of the handle, which is attached to the chainsaw housing using three rubber shock absorbers. To remove, it is necessary to remove the plastic plugs from the inner cavity of shock absorbers, after which with the help of a powerful screwdriver, squeeze the upper shock absorber first, then the one which is closer to the posterior handle.

A gas trigger is installed in the back of the handle, which is connected to the carburetor through the wire traction in order to disconnect the thrust from the gas trigger, it is necessary to unwind two screws and disassemble the handle.

When the handle remains on one shock absorber, it is necessary to turn the chainsaw housing from the inside of the handle and breaking to the side, remove the case from the last elastic band.

How to adjust the carburetor of the Stihl FS 55 lawn mower

The trimmer for the grass does not apply to complex household appliances, since most of its malfunctions are mechanical and can be successfully eliminated with their own hands. Even if the engine fails for good reason. For example, damage to the piston ring, repair is reduced to the replacement of parts.

And in a relative design, such a part of the device as the carburetor should be adjusted.

How does it work

Carburetor. This is the energy system module in which liquid fuel and air are mixed before supplying to the engine cylinders. Depending on the instrument and its operating mode, mixing and supply are regulated accordingly.

Carburetor cutter is uniform in almost all cases. The price of FS 38 for recreation should be adjusted using a carburetor screw. Belongs to the category of floating devices. How to adjust the carburetor on a scooter. Honda part AF-34. The latter provide constant characteristics of the finished consistency.

The mechanism of the module is as follows.

• The air enters the body of the tube with an air damper. Adjustment of the carburetor of the cooler of the trimmer for grass FS 55 in the video How to adjust the carburetor. The latter increases or decreases the flow of air depending on its position.
• In the zone where the gas supply hole is formed, the tube has a hood. diffuser. Adjustment of a trimmer for the grass of the carburetor carburetor fs 55 in the video is performed to adjust the blank speed. Here the flow rate increases.
• Fuel from the float chamber through the nozzle is supplied to the pipe. The level of the float determines the amount of fuel supplied. How to adjust 24, I removed the carburetor from the diode, I do not know the rings on the pistons of Honda Dio 34. Since the pressure in the chamber is normal, and in the pipe is low due to a large air vacuum, the gas is absorbed through the nozzle.
• The accelerated air flow collects fuel and spray it, forming the fuel.air mixture of the corresponding density.
• The mixture is sucked into the cylinder through the pipe.

The larger the air damper in the pipe is open, the higher the density of the air flow and more fuel enters the cylinder. A carbon tunnel settings are reduced to the damping coefficient, in which the consistency of fuel becomes good.

Signs of imbalance

Carburetor adjustment, of course, is carried out in the manufacture of the device. Typically, the need to regulate owners will be able to independently deliver fuel only after serious breakdowns, during which the module was removed and, for example, cleared.

Signs of a malfunction in the settings are as follows:

• It starts, but the engine stops here. Since the engine can only operate when a certain amount of very “bad” gasoline is supplied, in other words, blocking the supply channel, the engine stops;
• Very high fuel consumption, many exhaust gases. The result of incomplete combustion of consistency. In this case there is a lot of fuel, and the mixture is very thick.

Carburetor gasoline braids are quiet, Makita, Husqvarna and others are regulated by adjusting screws. Sometimes a prerequisite for a malfunction is a violation of fixation. due to vibration or damage to a protective cap. You can find such a breakdown by just trying to turn the screw a little: if the lock is not hard, you must check the settings.

Recommendations for operation

It is necessary to take time breaks in work. This is necessary so that the engine engine does not overheat and does not fail ahead of time. For amateur models, there is a break every 20 minutes for the same time. For professional braids, you need to interrupt work every 50 minutes, in this case the downtime should be at least 10 minutes.

You need to monitor the condition of the fuel tank. If you do not plan to use a mower for a certain time, it is better to drain the remnants of fuel from the tank compartment. This will help to avoid a breakdown of engine parts.

Reducer device trimmer for grass

Regardless of the manufacturer and model, the modern trimmer for grass is equipped with a gearbox for changing the angle of mechanical energy between the drive shaft and the head with a fishing line. The most widespread in the benzocos were conical gears, since, unlike straight.tooth, gears with screw teeth are able to carry huge speeds, have a more smooth clutch and have increased bearing capacity.

In the duralumin case (1) there is a shaft-shuster (2) and a gear conical wheel (3), pressed on a driven shaft (4). To reduce friction forces during rotation, rolling bearings (5) are installed at the support points of the shafts. Any gear gear is a highly loaded mechanism, whose duration and reliability of which depends primarily on the lubricant. Therefore, in addition to the main components of the trimmer gearbox, the trimmer reducer includes a special hole, through which you can grease bearings and gears without disassembling the assembly.

Prevention and possible malfunctions of the gearbox

The lawn mower requires the first prevention immediately after the purchase, because the manufacturer lays a small amount of grease. If a trimmer for grass performs a small amount of work, then lubricate the device at the beginning and at the end of the season. If the lawn mower works a lot, then we lubricate after 30-55 hours of operation.

The main faults include the most common options.

• Strong heating. This suggests that the lubricant has ended. It is necessary to add lubricating materials and run them in weak mode.
• Gearbox vibrates or stagger. This situation indicates mechanical damage.
• There is a knock. Then the bearing collapsed, the boot was damaged.
• If the knife of the trimmer for the grass is jammed, then the mechanism should be changed completely.

How to lubricate the gearbox gearboxes, see further.

Removing and lubrication of the upper shaft of a trimmer for grass

First of all, we remove the lower part of the rod from the connecting coupling, and then disconnect the coupling from the upper part of the bar (here we are talking about a coupling connecting two halves of the bar).

Trimmer for PRorab-8406 grass with a detachable coupling and the lower part of the bar

Now the most interesting thing: on some videos, as on this, holding the ticks of the shaft with ticks, sticking out of the upper part of the bar from below, knock out it with blows on the rods from the rod along with the rolling bearing (here we are talking about the coupling connecting the upper and lower shafts). Some have a gas station with a collapsible bar, as in the video, a coupling connecting the upper and lower shafts, it is put into the rolling bearing.

With our trimmer Prorab-8406 and such a number will not pass like him. They do not have a rolling bearing, and the connecting coupling (sleeve) is a continuation of the shaft of the upper rod. A locking ring is installed in the upper part of this shaft, which must first be removed.

The place of fastening of the upper part of the bar to the clutch clutch body

• We turn off the central screw completely. It fixes the upper part of the bar, partially entering the hole drilled in it. We loosen the side clamping screws and remove the bar from the clutch clutch body.
• We put out the shaft from the upper part of the bar on ourselves how much the backlash allows to get to the stop ring and remove it. A special puller may be needed. We extract a locking ring.

Stop ring on the upper shaft Motokos

• Without a locking ring, the upper shaft is easily extracted from the bar from the opposite side. Lubricate it, not forgetting about the slots in the bushings (couplings) on the shaft of the bar and on the clutch shaft.
• The greased shaft is installed in place in the upper part of the rod and fixed with the locking ring. We insert the bar into the hole of the clutch clutch cover and combine the hole on the bar with the threaded opening of the fixing screw.
• We screw the fixing screw and fix the upper part of the trimmer rod for the grass with side screws in the clutch lid.
• Clean the connecting coupling of the bar from the garbage and install from below on the upper part of the bar.

I don’t have a puller, and I use two large stationery paper clips to extract a locking ring. Previously, they need to be straightened, on one side make a half.ring for the fingers, and on the other. bend small hooks.

We capture holes in the locking ring and try to push them apart. With difficulty, but it turns out, and the ring is afraid of. If you know another way to remove a locking ring without a puller, share in the Комментарии и мнения владельцев.

In many videos, masters recommend using lubrication for a clock, this is the best option. In its absence, to lubricate the shaft of the gas mowing rod, you can use lititol-24, which is focused on temperatures up to 130 ° C. But solidol, with the worst lubricants and working at temperatures up to 70 ° C, is not recommended to use.

However, if you urgently need to lubricate the shaft of the rod motorcosa, but there are no suitable materials, then solidol or even ordinary motor oil will be better than nothing at all.

Oil for chains of chainsaws. What oil to use to lubricate the chain chain?

Chainsaws are a popular instrument for those who have to engage in countless household chores without the help of others. They can be used for various purposes. to prepare firewood, cut off dry branches But in order for the device to last as long as possible, you must correctly care for it, choosing different compositions well. A special role is played by oil chains, which is selected depending on the mechanisms of the tool and its features.

What to take into account?

The grease of the saw chain should be paid to the best. First of all, you should choose a special oil that will not harm the oil pump. Apart from that, this will ensure benign operation of the self.sampling system. What oil is pouring into gasoline for a chainsaw? You can, of course, fill in other types of oils. The chain also asks for proper storage, in other words of immersion in oil, and in case of wear, do not try to revive the old chain. it is easier to change it. What kind of oil to choose for chains of chainsaws, so that it is non.hazardous and meets all the requirements?

Types and composition

Choosing a specific oil should be dependent on where and how the chainsaw is operated. Mineral compositions are suitable for summer and warm season. Very often, when selling a chainsaw, the question sounds: “What kind of oil to fill in the lubrication of the chain?””. In other cases, it is better to use synthetic or semi.synthetic oils. It is important to provide what oil for the chainsaw is pour into a special tank. The Ural chainsaw is considered a descendant of the chainsaw What oil is poured and in the gearbox. For the purpose of lubricating the designed machine. If you need to lubricate the chain, do not use waste oils, which will lead to clogging the fuel system, and then to serious breakdowns of the tool.

The oil for chains of chainsaws should be thoroughly cleaned so that the lubricant is performed correctly and neatly. What kind of oil to pour in the oil compartment of the chainsaw?-. If you use low.quality compositions, then there will be no contact between the elements of the saw and the tire, sparks will appear, and the mobile details of the saw will subsequently arise.

How to choose?

Each chainsaw has a carburetor two.stroke engine and two tanks: gasoline is poured into one, butter in the second. When choosing a composition for lubrication, an important role is played by zoning. it should be minimal. Another important indicator is resistance to low temperature: the oil should not freeze with a strong minus, which will ensure the quality of the entire tool.

For lubrication, it is advisable to use adhesive oil for chains of chainsaws containing special substances, thanks to which the composition is well adopted with the chain. High.quality oil will remain on the chain when it rotates, and the chain itself will be more reliable in operation.

Another important lubricant indicator is density: if the composition is liquid, it will be consumed in larger quantities. So that when using a chainsaw, it is not harmful to the environment, it is important to use oil on a plant basis. its waste will be decomposed in a natural environment.

What oil for the chain of the chainsaws to choose, because modern manufacturers offer a wide selection of options? Of the specialized manufacturers, brands such as Divinol, Bio-Kettenol, Ravenol, Vegoil, Mobile, Castrol, Shell can be noted. Consider the features of their products in more detail.

Divinol

This brand proposes to evaluate the lubricant for high.quality chains, which is distinguished by good adhesive and lubricants, so the lubrication is performed efficiently, and the links and hinges of the chain are reliably protected from wear. The optimal combination of viscosity and temperature characteristics serves as a key that this oil can be used in any season and at any temperature.

Divinol offers different oil for a chain of a chain. What oil is required to be poured into a chainsaw for it possible to choose oil in pour into. What to use from them? Zweitaktoel FF attracts attention with economical spending, connecting with any fuel, preventing aging of the fuel mixture and excellent protection against corrosion. In addition, this oil can be used at any temperature regime. Divinol Kettenol and Divinol Kettenol Bio can be used to lubricate chains and tires of a chainsaw. Using these compositions, you can reliably protect the links and chain hinges when guaranteeing economical oil consumption. High.quality organic oils of this brand provide excellent lubrication and adhesive properties, so their use is not only simple, but also environmentally friendly.