How to hang a trimmer in a barn. Original design in the shape of an obelisk

How to store garden tools so that they do not take up much space: 7 ways and examples

One of the most rational options for storing garden equipment and tools, bicycles, rubber, sled, fishing rods, etc.D. The system is a multi.Leveltor with many shelves and mounts. The stand is made of durable plastic, aluminum profile or other metal. It can be installed in the garage, basement, household, shed, on the veranda or in the pantry. All components are interchangeable, in addition, the wall can transform. Its length, height and nature of the mounts are easily changed, which allows you to adjust them to the dimensions of different objects. The most durable wall mounting systems are aluminum, they withstand the load up to 300 kg per 1 soup.M.

In everyday life, we are surrounded by many things that need to be stored correctly. For this, organizers are invented, which differ in visual type, location and material of manufacture.

The main purpose of storage systems in the barn is to systematize garden products according to certain criteria-it can be color, dimensional hard, etc.D. Tools can be placed in the cottage itself or in the barn. In the first case, small organizers will be required, which can accommodate all things, in the second one must rationally distribute all garden products in the room so that they can be found immediately, and it was easy to use them. Organizer for instruments happens:

How to hang an eater in a garage

A slender trimmer solves these hard weeds in your yard. How you care about your trimmer, determines how long it will work well for you. Sliding the streamer trimmer on the wall in the garage holds it from the floor, where it can be damaged. The use of hangers also holds your garage organized and saves in the area.

Select the location

Before you start drilling and hanging holders for a trimmer of chips, open the garage to find the best place. Measure the length of the harvest so that you can find a stain on the wall of the garage, where the car is well suited. If you have children, select a place on the wall where the chips trimmer are out of reach. Select a place away from any sparks or open fire with proper ventilation, especially if your trimmer works on gas.

Hang the holders

The brackets for the shelf and rods of the cabinet work well to hold the trimmer. Brackets have curves in which a bar should be installed. These curves are ideal to hold the shaft of the trimmer string. The brackets hold the trimmer from the wall to accommodate the engine. You will need two brackets to hang a trimmer line horizontally. Place the brackets as much as possible to distribute the weight. Attach the brackets to the hairpins in the garage wall so that they can hold the weight of the trimmer.

Safe storage

Always give a cool trimmer time before hanging it on garage brackets. Clean the car outside before entering it into the garage. Cut pieces of grass and weeds. Empty the fuel tank before hanging it to store the car for the winter.

Weed eater time

Communities Equipment of the garage and tool Blog Convenient location

This recording about saving time when working in the garage, in addition to my record about saving my place yesterday.Spent a little time placing the tool, but saved it a bunch. Now I know exactly where the key is and there is quick and convenient access to any tool.

The bulk of the tools hang on a shield from chipboard. Fill this wall gradually, as necessary.

On the opposite wall, next to the compressor. All pneumatics.

HOW TO CUT THE GRASS IN THE DIFFICULT POSITION USING GRASS CUTTER/BRUSH CUTTER MACHINE/NYLON TRIMMER

In the corner under the shelf. All sorts of brushes and brushes. What is the place to disappear?

See also  Which grass trimmer is better straight or curved?

Gloves are always at hand. Hang on clamps for curtains with sawn teeth. It is enough to pull the gloves to take them.

The advantage of such a fastening is no need to wait until the disk stops. You can, letting go of the button, immediately hang the grinder in place.

New trick for Weed Eater.

The meaning is the same. Do not wait for a disk stop to hang a grinder in place.

Lamp above the workbench. On the runners for furniture boxes. Can be pushed right under the shelf, you can put forward for better lighting.

_

How to store a lawn mower in winter

This unit is sent for “well.Deserved rest” back in the fall, and is extracted closer to the end of spring. Due to such a long “downtime” the requirements for the conservation of lawn mowers are very high.

Gasoline lawn mower

The main elements have a benzogazonocoster. This is an engine and cutting parts. They should pay maximum attention:

  • The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
  • If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
  • Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.Quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
  • Inspect the cutting knife. Does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
  • The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
  • Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.

Electric lawn mower

Before cleaning the unit for the winter, check the integrity of all contacts and inspect them for oxidation and rust. The rest of the electric motor does not require any special conservation measures. Rub the battery for the winter, clean the case, deck and knives from the grass and, if necessary, imprison them.

How to store a lawn mower in winter

This unit is sent for “well.Deserved rest” in the fall, and is extracted closer to the end of spring. Due to such a long “downtime”, the requirements for the conservation of lawn mowers are very high.

Gasoline lawn mower

The main elements have a benzogazonocoster. This is an engine and cutting parts. They should pay maximum attention:

  • The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
  • If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
  • Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.Quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
  • Inspect the cutting knife. Does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
  • The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
  • Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.
See also  Idle Trimmer Adjustment

How to store a lawn mower in winter

This unit is sent for “well.Deserved rest” in the fall, and is extracted closer to the end of spring. Due to such a long “downtime”, the requirements for the conservation of lawn mowers are very high.

Gasoline lawn mower

The main elements have a benzogazonocoster. This is an engine and cutting parts. They should pay maximum attention:

  • The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
  • If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
  • Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.Quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
  • Inspect the cutting knife. Does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
  • The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
  • Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.
hang, trimmer, barn, design

Electric lawn mower

Before cleaning the unit for the winter, check the integrity of all contacts and inspect them for oxidation and rust. The rest of the electric motor does not require any special conservation measures. Rub the battery for the winter, clean the case, deck and knives from the grass and, if necessary, imprison them.

How to store a trimmer in winter

With a trimmer, you need to be able not only to handle correctly, but also to store it competently. Often benzo or electric ships are simply thrown into the barn, where they lie until spring. Such negligence can cost expensive.

Gasoline trimmer

Benzotrimmers are powerful and compact devices designed for mowing grass. Proper storage is one of their components of long and uninterrupted work.

  • Find the corresponding place for storage. It should be a dry room, with normal humidity, isolated from sources of bright light and open fire. It is impossible to give a trimmer to freeze, it is better to cover it with moisture absorbers (for example, an old blanket);
  • Drain the entire fuel mixture (gasoline and butter) and let the device work at idle until it stalls;
  • Remove the remains of grass between knives and motionless parts of the trimmer and from the blades. Do not be lazy and carefully inspect the body for the presence of organics;
  • Turn out and inspect the spark plug. The normal color of the electrodes is reddish, if they are covered with soot, they should be cleaned or replaced;
  • Remove the metal cutting knife and clean it from dirt. Check the integrity of the knife. If cracks or chips appear on it, replace this part. Dry and cleaned from the mud, store the blade separately;
  • If a trimmer cord (trimmer line) is installed on the trimmer, remove it and put it in fresh water all winter. So he will maintain initial flexibility, withstand the tension and last longer;
  • Store a motorcycle in a limbo. If the steering wheel interferes, expand it in the other direction or unscrew it.

U Electrimmer Before winter conservation, check the integrity of the wires, isolation and contacts. Do not allow sharp temperature fluctuations and do not hold the trimmer in the cold. The resulting condensate can disable contacts and other elements of the device.

Technology for creating a wooden tool for tools in a garage with your own hands

Before creating a rack for storage with your own hands, you need to decide on the total number of tools that must be placed.

Project creation are important points

In order for the wall system to be convenient, they make up a plan of the future design on paper, where all requirements for the system are taken into account:

  • Calculate the height and width of the rack. It is better to use completely the entire wall from the bottom to the top.
  • The recommended depth of niches for the rack is up to 65 cm, and the width between the vertical supports of the shelves is up to 1 m.
  • The required number of shelves is determined, including how many shelves will be with a toolwall for a tool.
  • Below are floor spacious shelves and racks for tires, wheels and for a large carpentry tool.
  • Design places for magnetic ribbons, hooks, holders.
  • Calculate how many organizers and containers are required, what size, and also determine their location.
  • Sort the tool and all small fasteners and parts for storage.
See also  How to Install a Mowing Head on a Trimmer

What will be needed

Tools are prepared for the manufacture of a rack:

In shelves and containers, it is recommended to drill holes for natural ventilation. This is necessary to protect objects from rust.

What materials need to be prepared

All necessary material for creating a rack is prepared, according to the designed project:

  • For the main panel of the holder, you can use a perforated.
  • If the rack is made of wood, it is recommended to purchase lumber from oak or pine without cracks, knots.
  • Wooden boards up to 2.5 cm thick are required for shelves.
  • Shelves can be made from plywood for ordinary and laminated.
  • The vertical racks of the frame are made from a timber 10 × 10 cm.
  • Wooden boards are previously recommended to treat with mold and fungus with products, paint.
  • For assembling a metal frame, a rectangular profile and corners (up to 2 cm) is required.

The manufacture of components

The manufacturing procedure for the rack and components is as follows:

  • On the specified sizes, vertical racks of timber and boards or plywood on shelves are cut, prepared by a perforated. Set up places for shelves.
  • For the manufacture of a metal frame, the preparations of the desired height are cut with a grinder and the location of the shelves is planned. Collect the frame using fasteners, corners. Apply a primer, then cover the parts with anti.Corrosion paint.
  • Shelves are collected from boards. They are tightly pressed against each other and chopped with nails or self.Tapping screws.
  • The shelves from the boards are collected, laying the elements across the frame, so they can withstand the great weight. If the shelves are assembled by laying the boards along the frame, that is, the probability that they will bend under the weight of the tools.
  • The design is assembled using self.Tapping screws, nails and glue for wood.
  • The joints of all parts are additionally strengthened with metal corners.
  • The entire structure is installed to the wall and fixed with metal brackets.
  • Separately made in the required number of shelf with cuts, holders, magnetic tapes, racks, containers and organizers.
  • You may need a small desktop with a vice of wooden boards. It can be attached to the wall system in the form of a stationary or folding surface on metal or wooden holders.

Assembly of the structure

First, the rack frame is assembled, then wooden shelves are attached to it with self.Tapping screws. The shelves of the rack are filled with retractable baskets, organizers, containers and other holders. Hooks, magnets and magnetic tapes are attached to the performer. They place tools on them. For convenient fixing the pliers on the perforated, the mount in the form of a crossbar is installed. Containers are filled with small fasteners, tools. Garden inventory, bicycles, tires and wheels, skis, skates and sledges are hung on holders or racks, or placed on containers.

hang, trimmer, barn, design

Processing and painting of the finished product

The finished rack is once again processed from mold, the ends are painted in several layers with paint. Containers and organizers can be painted in the same color as the rack itself.

Most often, a workshop or garage does not look in the best way due to cluteness. But thanks to the creation of a wall.Mounted system for storing tools in the form of racks, all the necessary items, fasteners, inventory will be competently sorted and placed. The room will acquire a neat look, and all the work can be performed quickly and without delay.