How to hold a trimmer correctly. During the mowing of grass (and turns), do not forget to look around!:

Rules for the care and maintenance of a trimmer for grass

Hand braids will help to cope with any vegetation without overstrain, but a careless attitude can quickly disable any tool, including the highest quality. The proper care of the trimmer will extend its service life and save the money of the owner, who will not need to pay for maintenance and repair of the apparatus. Such simple actions are possible even for people with minimal technical knowledge. How to care for this garden tool. In all details in the material further.

Half.Cutters are divided into two main groups: gasoline and electric. The first type works on liquid fuel (pure gasoline or its mixture with lubricants), the second. On electricity, from the network or battery.

Hand braids of gasoline group

The principle of action of motorcycles. Before starting work, a fuel is poured into its fuel tank, which enters the engine in small portions, where it burns, and the resulting hot gas pushes the pistons in the cylinders. As a result, the motor crankshaft rotates, this movement is transmitted to the spindle of the working head, where there is a coil with a trimmer line or a nozzle (a knife with two or several blades).

Outwardly, Motokos looks So. The engine and cutting part are located at the opposite ends of the long bar and are connected using a hard or flexible shaft. Above the mount for the coil/nozzle is a gearbox, the task of which is to transfer the spindle less revolutions per unit of time than the crankshaft of the motor performs. Buttons and control levers are located on a handle associated with a flexible cable engine.

Features of management.A starter is used to launch in gas troops, to adjust the revolutions-a gas trigger that opens or covers the carburetor damper, which is why more or less fuel enters the motor. You can stop the work by pressing the “stop” button, which opens the chain.

Hand braids of an electric group

Electric trimmers are arranged in the same way, only they do not require a fuel tank, and the control buttons on the handle are much less. The engine may be from above, like benzokos, or from below right above the head. In the latter version, there is no gearbox. Here the drive and cutting nozzle are directly connected. The rods of electrimmers are solid or collapsible, and in some models, telescopic for convenient and quick adjustment of the length.

hold, trimmer, correctly, mowing, grass, forget

When powering from the mains, the mitch is included in the outlet or extension cord (cable leaves from the engine). Battery models work from batteries that are inserted into special nests.

See also  How To Start A Trimmer Petrol Champion

The device of a gasoline braid

The weight of the entire device. About 8 kg, which is quite difficult to hold on the arms. Therefore, the unloading belt-rug belt with a protective pad and regulators is included with the scope of the scythe.

The braid is designed for mowing grass and small shrub in personal plots.

As you know, grass can be mowed in different ways. Folding it in rolls or simply rolling it out. In addition, the grass is different. Soft or rough, with thick stems, shrub.

10 football rules you DIDN’T KNOW existed!

Trimmers with an electric motor

Most of the electric models are sold in disassembled form, you need to assemble the tool yourself. Before you start working with an electric trimmer, make sure that its assembly is correct. This will protect you from injuries, and the tool. From breakdowns.

Check the battery charge level if the model eats from the battery, or connection to the network. Lubricate the gear with solidol or oil. For safety reasons, do not use the electrimmer in rain weather, do not mow wet grass them. Moisture falling under the device case can lead to a short.Circuit, a tool breakdown, as well as injuries to the operator.

Storage and care for trimmer

Special care is required gasoline trimmers. In addition to cleaning and lubricating cutting and wiping surfaces from plant juice and dirt, you must also take care of the engine. Air filter can clog it. The frequency of cleaning is about 10 hours. In addition, the ribs of the engine cooling radiator are sometimes polluted, why it quickly overheats, and this can lead to its stuck. The method of cleaning the radiator and air filter is described in the instructions for a specific gas trimmer.

Before leaving a trimmer for long.Term storage at the end of the season, all fuel should be drained from it., Then start the engine and wait for its stop. This provides a complete absence of fuel in the tank and carburetor. After cooling the engine, it is necessary to unscrew the spark plug, pour 30-40 ml of two-stroke oil into the cylinder, slowly scroll the crankshaft using the starter cable so that it spreads to all cavities inside the engine, then tighten, candles, candles. After that, the bar must be disassembled, when disassembled, cover all metal parts that can be rusted and then store a trimmer in a place protected from moisture.

After completing the work on electric trimmers, it is necessary to wipe and twist the wires and extension cords, as well as in order for the batteries to charge, because the trimmer does not even hold a very short time with a discharged battery. This leads to a quick failure. After that, the head should be removed, since the protective cover and the inside of the drum should be cleaned. If this is not done, the juice of grass on them can dry and lead to the fact that viburnum with the mechanism that fixes the trimmer line will cease to function normally at the next launch.

It is much easier to prepare electric trimmers for long.Term storage. The main thing. Protect them from moisture entering the control circuit and engine, as well as from rust on unprotected metal elements using canning oil. Do not forget to charge the battery before storage, then your trimmer will be as good as new.

See also  How To Check Oil In A Trimmer

Any owner of a country house or cottage knows that in summer and spring you need to constantly care for the lawn, otherwise it will lose its appearance, an attractive appearance. Therefore, many owners of cottages are wondering how to mow grass with a trimmer with trimmer line. And before you start learning a haircut, you need to choose a suitable tool for the site and only then use it correctly on the lawn.

Management of a trimmer, as it may seem to many, is not an easy task, but nothing special (this is not difficult), if you are correctly observing security measures and know how to control it properly, and not a garden tool with a metal disk.

What nozzle to use for mowing grass with a benzoca

The design of the gas station uses two types of cutting nozzles or milling. These are coils with trimmer line, as well as steel or plastic disks. What is better to choose for work with a gas engineer. The site presents information on how to choose discs and trimmer line for trimmers, as well as their types and design features. Briefly consider what types of cutting mills should be used on trimmers and benzocoses.

  • To prick soft grass, a trimmer line is used, which is wound on a drum or coil. The trimmer line, unlike metal disks, is used where the grass grows next to trees, houses, fences and other obstacles. The trimmer line allows you to produce high.Quality grass mowing near the obstacles, while without violating the design of the tool
  • Metal knives. Have 2, 3, 4 or more cutting parts, through which the grip of rough grass and thickets are carried out. Practice shows that the thicker the sprayed thickets, the more blades should have a mill
  • Metal discs with small teeth in an amount of 40-80 pieces-designed to prickly prickly vegetation. It can be rough grass, weeds, thick thickets and even small trees. The larger the number of teeth on the cutting nozzle, the higher the effectiveness of the tool in question
  • Plastic discs. Are used mainly on electritrimers or batteries

Hedge Trimmer Use Maintenance

The choice of cutting milling cutters depends on the location of the tool. If it is planned to work in the personal territory, then the trimmer line is selected, and for the injection of grass in the field or steppe, discs with 3-4 blades or more are used, as well as disks with small teeth.

It is interesting!In most cases, cutters are not equipped with a tool, so the buyer can independently decide what he needs. A trimmer line or a steel disk.

Safety precautions during work

Safety precautions when working with motorcycles are to fulfill the following requirements.

  • Do not use trimmers in the rain or with increased humidity.
  • People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
  • The operator of the trimmer is better to put on clothes made of dense fabric, completely closing the arms and legs.
  • You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
  • The wire of the network trimmer should be behind the mower.
hold, trimmer, correctly, mowing, grass, forget

See also  Why Trimmer Doesn't Develop Stihl Turnovers

How to remove tree roots in your lawn

So, the use of manual vehicles for mowing grass allows you to maintain order on a small area. It is more convenient to use a mower in vast areas. In addition, the trimmer is relevant when harvesting hay and restoring order in the territory: small herbal scraps can be mulched strawberries and other useful plants. You can clearly see the mowing process with this tool on the video.

Protective equipment when working with a motorcycle (trimmer)

Tip: This article does not replace the instructions given in the guide for the use and safety precautions. Always read the product management before use and observe safety precautions.

For safe work with a motorcycle (trimmer) you will need:

  • Helmet;
  • Headphones;
  • Eye protection (mesh shield or glasses, but it is better to use both);
  • Long durable pants (the legs are in the immediate vicinity of the knife or trimmer line, so they must be protected);
  • Shoes with a non.Slip sole (preferably with a steel nose);
  • Soft gloves (to protect and absorb vibration);

Storage and care for trimmer

Throughout the entire service life, the device must be regularly cleaned and lubricated. Using a special brush, it is necessary to remove all small hairs after each haircut. For some models, there is a flushing of knives under a stream of water. It is also advisable to periodically lubricate the knives, since during operation the upper part of the teeth moves along the lower platform, and as a result of such friction, the details wear out. To lubricate the tool, you need to perform the following manipulations:

  • Take the oil from the set or purchase WD 40 yourself;
  • Drip a few drops on the entire surface of the knives;
  • Remove excess oil and hair with a napkin;
  • Turn on the trimmer and let it work for 20-30 seconds;
  • Thoroughly wipe the leisure blades.

So, the trimmer has become a universal device for removing and cutting hair on any parts of the body, ranging from a soft gun on the head of infants and ending with excessive vegetation in the ears and nose. To learn how to use it, special skills are not needed, but some nuances should still be known and observed.