How to install a disk on a benzoca. Trammer operation in raw weather

Rules for replacing knives on a trimmer for grass

If the disk on the trimmer is used regularly, it needs to be removed from time to time to remove and sharpen or change it to a new. This part can be made of metal or plastic, have a different number of blades, but the replacement process remains the same. Over, this procedure is similar to the equipment of different manufacturers, whether Carver or Huter, but minor differences are possible. Changing the knife on the trimmer is quite simple if you observe safety precautions and know the correct procedure for which you can find a description of which you can in the user’s instructions. The whole process of replacing step by step, as well as the way of independent sharpening of knives, will be described in this material.

When using motorcycles in summer cottages, the most popular nozzle is a trimmer line. It has a small price, suitable for different trimmer heads, is safe when working. The minus of the application of the trimmer line is that it is convenient only for the bevel of low shoots. In other situations, the string is immediately clogged, regardless of whether the gasoline or electric model of the trimmer is used. In addition, vegetation is wound on a spindle, which creates significant resistance on the shaft and leads to its breakdown. It can also provoke a failure of the piston system in benzocos or burning out the motor in electrimmers.

Therefore, for mowing high or hard vegetation, various nozzles are used. So, for harvesting tall and rough grass, thin shoots of trees and shrubs to install and use it better. This nozzle clogs much less often, which contributes to the greater wear resistance of technology.

Features of disks for motorcycle

Disks-ceremonies are produced by plastic and metal, as well as various shapes to perform diverse tasks.

• Two-, three- and four-lobed knives with pronounced blades are used for mowing grass and overgrown trees. However, they are not suitable for harvesting hay, as the shoots are crushed, cutting them several times.
• Massive four.Lobed discs are intended not only for clearing the earth from grass, but also for hay mowing. They prevent multiple cutting of shoots, thereby making them suitable for harvesting for the winter.
• Disks with cutting faces around the perimeter are relevant for the bevel of reed and reeds. Such knives are very heavy. This is the necessary quality to cut thick stems.
• Professional discs with a saw tooth for artisans and motorcycles allow you to cut down small trees and bushes.

Live Doppler 13 Weather Forecast

Plastic knives are used as an alternative to metal disks. They do not need to be tightly attached in the head, and they revolve as a result of exposure to centrifugal force. The strength of the plastic knives is high, so the service life is quite long.

Disk selection criteria

You need to choose a plastic or metal knife, given the area of ​​the site that is planned to be processed, as well as the type of trimmer. Electric or gasoline. The number of blades will depend on which shoots must be removed using the tool. Choose the desired disk shape, the number of blades and manufacturing material can be using the instructions for the operation of the device. It usually prescribes which mills are recommended to use to solve certain problems.

Characteristics

• Engine type: gasoline.
• Power: 1500 W.
• Power: 2 l.With.
• Engine volume: 52 cubic meters. Cm.
• Engine Applicity: 2.
• Type of cutting element: trimmer line, knife.
• Revolutions: 9500 rpm.
• Fuel tank volume: 0.7 l.
• Handle shape: U-shaped (bicycle).
• Speasing width: 25.5 cm.
• Length: 35 cm.
• Width: 23 cm.
• Height: 166 cm.
• Weight: 6 kg.
• Warranty: 12 months.

Installation of a cutting disk

How true Put a disk On gasoline trimmer. We are in the video.

On powerful and professional equipment, saw discs are installed, which have up to 80 teeth, and sometimes also carbide (winning) attacks on the teeth. Such a winning disc for a trimmer is rarely used in private household, mainly it is placed on professional motorcycles. It has a very long resource and universality of use for both fresh grass and dry impassable weeds.

Discs also differ in the thickness of the blade, which can be from 1.3 to 4 mm. Thin discs are cleanly, quickly and carefully cut off the grass, but they are blunt faster. The thickest knives do not wear out for quite a long time, but they are more suitable for rough shoots and weeds.

As practice shows, the most common shape of a knife for a trimmer is round with teeth around the circle. A variety with 4 large teeth and a nearby small cloves between them is also a frequent choice. They most effectively help in cleaning the site, are easily installed on any model of trimmers.

Which knife is better

Modern manufacturers are offered to the consumer a wide selection of disks varieties. The cutting parts are classified according to the following criteria:

Material

The material for the knives is plastic or metal, which determines their purpose. The question naturally arises of which disk is better to use: plastic or metal? The choice is determined by the following factors:

Three.Lobed plastic knife for an electric trimmer

From the point of view of safety, steel mills are not recommended to be put on electric braids. They are almost always equipped with plastic blades. Features of the design of the power tool itself, its technical characteristics make the installation of metal cutting parts dangerous:

According to the rules of safe operation, plastic knives are used only on braids with a flexible bar. Plastic blades are designed for mowing soft plants (for example, burdock, nettles), dryness. A metal disk-fluz is used for mowing thick, high, coarse grass, shrubs and shoots of various trees, because its cutting properties and wear resistance are higher than that of plastic analogues.

Trammer for trimmer with carbide attacks 40 teeth

The device, as well as the technical characteristics of the benzos, determine the use of metal nozzles when working with them:

• The presence of a straight rod increases the distance to the legs of the mowing;
• Comfortable handles with limiters;
• The possibility of a smooth speed set.

Gasoline units equipped with metal disks are well suited if it is necessary to pump out significant areas with different grass or shrubs.

The number of blades

The form of disk blades practically does not affect the quality and speed of work, their number matters. For hay harvesting, it is recommended to use mills with a large number of blades, for example, with 8 or 4 main and 4 additional. If there are few of them (2, 3), then such knives grind the grass very hard. Mills with a large number of small teeth are used to mow young shoots of trees and shrubs.

Patriot PT453 gas stroke with a metal shrubs mowing

Metal knives for benzocyes are sharpened in different ways: one-sided and on both sides. Dumb or with poor sharpening cutting cuts of milling cuts reduce labor productivity, and also worsen the quality of work. In this case, the load on the tool and fuel consumption increases.

The collision of knives with stones is dangerous, as a result of which the tool bounces, which can apply the mowing of injury.

Select a cutting element for a trimmer according to the material, size, design should be based on the type of tool and the power of its engine, the volume of upcoming works and the type of plants that have to be mowed. Partially, the instructions from the manufacturer to the model used will help. The recommended milling parameters are spelled out there.

How easy it is to wind a trimmer line on a trimmer head

On the rogue can be wound from 3 to 10 meters of wire. During the mowing process, the nylon thread is erased, you need to exhibit new tips. There are several ways to perform such a task:

• Manual. To do this, you need to stop working, remove the key lid and set the desired length. The process is simple, but it does not add speed to the kin.
• Semi.Automatic feed. With this method, new tips are exhibited independently. To serve them, you only need to slightly hit the ground with a head on the ground. The anchor mechanism is triggered, and again you can mow. This option is a win.Win. You do not need to stop the engine, stop the mowing, and the feed is strictly regulated, therefore. Economical.
• Full machine. A very convenient way. You simply reduce the momentum, and the ends of the cord are replaced by new. The system takes care of this on its own. The speed of work is greatly increased. But there is a small minus. A large trimmer line consumption. You cannot control it.

Hyundai H1 2014 замена тормозных дисков передних

When the thread is over, you need to wind a new. Refueling methods also differ. There are two types. Manual and fast.Fast.

The most common. Manual. Phased actions:

• Unscrew the mowing head. Open the lid. There are latches on the sides for this.
• Remove the coil, as a rule, information is applied on it, what diameter, in which hole you need to plow. An arrow is also drawn, indicating which direction you need to wind.
• Inside the coil, in the middle there is a side. On it. A groove for the threading of the loop.
• We measure the length of the wire. Web users advise cutting off 3-4 meters, no more. Since too tight the winding is ineffective. Remember also that the thicker the trimmer line, the less it needs to be wound.
• The cut cord is folded twice. They spread the loop, fix the bracket. The coil is kept by the spring from themselves. They are wound manually counterclockwise. You need to do it tightly and evenly. One thread lies in the lower part of the coil, the other in the upper. The turns should not interspers.
• The tips are inserted into the holes and exhibited out. Twist the coil. And head to place. Correct the ends, knocking on the ground.

Sometimes the coil provides for winding two separate pieces. This is visible when open the coil. In the middle she has a high ledge, and the holes for fixing are two. The method, in principle, is the same, but we divide the thread into two parts, fix the brackets in the coil and wound.

The rapidly-riverbed method is better, it differs both speed and comfort. You do not need to disassemble the coil. It is enough to tie the loop into a special hole and crank the mechanism. He himself wraps a trimmer line on a bobbin. It remains only to adjust the ends.

Convenience to install a disk

The installation of the abrasive circle with the front side provides another advantage. You will always visually see which nozzle (on metal or stone) is installed at the moment on the grinder. They are not interchangeable and with an error there is a high probability of serious consequences. For example, when trying to use a cutting disk for metal, it is possible to destroy and trauma the formed pieces of the master. Therefore, the installation of an abrasive circle with a label will provide not only convenience, but also the safety of work.

Instructions instructions

In the instructions to many angle grinders, for example, for Metabo WP 850, it is clearly indicated that “a metal flange for abrasive cutting should fit the supporting flange”. Manufacturers are not in vain give such recommendations, as they provide safe work with the tool, reduce the risk of serious injuries to the master.

Rules for replacing knives on a trimmer for grass

If the disk on the trimmer is used regularly, it needs to be removed from time to time to remove and sharpen or change it to a new. This part can be made of metal or plastic, have a different number of blades, but the replacement process remains the same. Over, this procedure is similar to the equipment of different manufacturers, whether Carver or Huter, but minor differences are possible. Changing the knife on the trimmer is quite simple if you observe safety precautions and know the correct procedure for which you can find a description of which you can in the user’s instructions. The whole process of replacing step by step, as well as the way of independent sharpening of knives, will be described in this material.

It is worth immediately making a reservation that the operation of electric trimmers is completely eliminated in the rain, wet and raw weather. This can lead to a short circuit and shock. You can not use an electrical appliance and after the rain, you must wait until the lawn grass is ventilated and dry out. However, with gasoline motorcycles, everything is also not as smooth as we would like. Some well.Known manufacturers prohibit the use of their models in the rain, as power units do not have the necessary degree of protection against moisture.

It is also impossible to operate wet equipment. If the braid for some (albeit short) time was in the rain, then it must be brought into a dry place, wiped and give time to dry before starting the launch.

Some experts say that gasoline trimmers can be mowed without stopping, even if it is easy to rain. Of course, this is not recommended to do this, because the likelihood of breakdown of various nodes and the engine itself increases. The electrimmer with the upper location of the engine is less sensitive to moisture, but it is not insured from a voltage jump due to water extension cord in the connector. You can limit yourself to the purchase of a new extension cord, but the repair or replacement of the trimmer itself is not the pleasure of cheap.

Sharpening of the disk

Regardless of the quality of the disk, over time it is stupid and begins to cut the grass poorly. If the knives are still relatively new, and the replacement is inappropriate, you can sharpen them with your own hands.

• Disassemble the trimmer, remove the knives;
• Carefully inspect the disk. If cracks are discovered, it is better to change the part to a new one, since its further operation is unsafe;
• Bent blades can be carefully bend with a hammer;
• Given the size of the disk, you need to choose the right file for metal, this will provide more convenient work;
• At an angle of 30 ° equally sharpen all the upper cutting edges of the disks;
• Collect a trimmer in the reverse order.

To sharpen the disk, you can use an sandpaper at low speeds by installing a circle for grinding with medium.Sized grain. Through such a tool, the process will move much faster. For safety, you need to put on gloves on your hands, and a protective mask or glasses on your face.

So, for beating grass on gasoline and electrimers, plastic and metal disks of various shapes are used and with a different set of blades. They are chosen in accordance with the type of work performed and the size of the processed territory. If the knives on the mower are swept away, they are easy to sharpen or change them on their own. Despite the simplicity of the procedure, you need to be neat and remember the safety so as not to injure by negligence or not to damage the technique. A more detailed description of the replacement of knives in relation to a specific trimmer model can be viewed in the operating instructions or on the official website of the manufacturer. For clarity, the general process of the process is shown in the video.