How to install a drill in a perforator. Nozzles for the drill and their installation

How to fix a drill in a perforator

Rarely. With wood. A variety of materials involves the presence of a large number of nozzles (working body):

All of them are designed to perform different works. Drown in the surfaces make neat holes of the desired diameter and depth.

Products that are designed for work on such solid material as concrete are made using carbide plates. They are attacked on the cutting part. But in the process of application they wear out.

How to sharpen the drill on concrete for a perforator? Sharpowing can be performed on the corundum sharpener, which is installed on the appropriate equipment. The drill must be hidden so that the worn cutting edges become straight, and the place in which they intersect, as if coincided with the axis of rotation of the punch

Pay attention to the angle of sharpening of two cutting edges. With the unevenness of this parameter, the edge, in which the angle of sharpening is large, will be loaded stronger

As a result, the punch will quickly fail.

Boers are designed to break through high.Strength materials. The tool with a drill nozzle simultaneously drills, performs vibrating actions or blows. Such work is necessary when installing a socket. Когда на аппарат установлены зубило или лопатка он работает как отбойный молоток.

The type of fastening for all nozzles, except for drills, is suitable only for a perforator, because it has mounts in the shape of grooves and a landing tail. You can fix the usual drill from the drill in the perforator, you need a removable cartridge (adapter). It is 2 types: cam. A special key is used to fix the cam clamp. It is inserted into the thread on the outer perimeter and rotated. At this time, the zangia mechanism that is installed inside the cartridge, depending on the direction in which the key moves, is compressed or unclenched.

A quick.Packed cartridge is driven by applying a slight effort with the hand. The drill hole will open if you press down on the cartridge.

There is also a small elongated design that allows you to lengthen the drill. Thanks to the extension cord, you can make deeper through holes in different materials. When drilling with it, you should carefully adjust the cutting modes.

For different materials necessary, different drills

How to insert a drill drill into a perforator?

In this case, you will have to apply the adapter. It is a regular cartridge as that of the electric drifts (key or fast.Packed. No difference), in which the adapter is screwed, one end of which has a thread, and the second is nothing more than the same shank as the drills.

Cartridges can be with different threads. Typically, for our case, they are used either by 1/2 inch or metric M12. The adapter, accordingly, should also have a similar threaded landing.

The adapter is entered into the cartridge. Then, for reliable fixation from the inside of the cartridge, a screw that has a left thread is screwed into it.

Now the assembled structure must be stuck in a perforator just like drilling is installed in it. And in the end, we get, in fact, an electric drill, which, however, the cartridge will have some backlash.

It is not necessary to work in shock mode. The assembled adapter will not withstand and quickly fail.

Lucky for those who bought the unit immediately with such an adapter. In addition, there are such models of perfoys that have two replacing cartridges. One under the drills, the other for the drill.

The advantage of such a configuration is that in this case there is no backlash that is available when using the adapter. So the punch becomes a completely full.Fledged drill. But to overpay for such a model, of course, will have to.

Here is actually all the information on the installation of drills and drills in a perforator. I hope it was clear. I say goodbye to this. Until new meetings!

Checking serviceability

Before inserting and fixing the drill in the perforator, you need to make sure its performance. For this, the tool is included in the network, put in the drilling mode without impact, and then press the start button. If there are no extraneous sounds, uncharacteristic smells, then the unit is ready to work, and you can take up the installation of a storm nozzle.

A few tips for using a drilling tool

In order not to encounter the fact that a flying tool or concrete crumbs will harm your health, drilling must be performed in compliance with all safety measures. As a means of ensuring such safety, you should use protective glasses, gloves, bears or headphones that protect the organs of hearing. Naturally, all work must be performed in special clothing in which there should not be hanging elements that can be wrapped in a drill.

Hitachi DH38MS 950W SDS-Max Hammer Drill from Toolstop

To exclude overheating of the electrical tool used to drill, it is necessary to regularly give him rest. It is very important to insert the drill correctly (you need to do it all the way).

Two methods of a clamp of a thin drill cartridge, if the fists do not reach the shank a little

If the drill is stuck in the wall during the drilling, then it should be removed without removing the tool from its surface. To do this, the drill must be removed from the perforator and insert another, with which it is necessary to begin to destroy the wall around the drill stuck in it.

How to insert a drill

The perforator itself also has a fast.Packed mechanism. Reliable fastening of the drill in it is provided with fixation using special balls, which, when closed, are tightly included in the grooves on the lower part of the drill.

In order to fix the necessary nozzle, whether it is a drill or crown, you need:

• Take the lower part of the cartridge down (towards the perforator);
• Holding it in this position, insert the right nozzle;
• Let go of the cartridge.

And to insert a drill into a punch with an adapter, first fix the removable cartridge, which has a mount with grooves for the tool. Then the drill is installed directly. To pull out a drill or drill, you need to perform all the above actions again.

Here I would like to note that any manipulations for the installation and removal of a drill or other nozzles are preceded by a check of the working condition of the perforator mechanism. To do this, the unit must be included in the network and, having set the necessary operating mode, click on the start button. If the unit does not make unusual sounds and at the same time does not feel the extraneous smells of Gary or burned plastic, then the tool is ready to work.

If the drill is stuck

It happens that in the process of working on time, an unlucky shank leads to jamming. The fixing mechanism is stuffed with dust from drilling, and the drill cannot be pulled out. What to do in this case? No need to panic or immediately run into repairs. Using penetrating lubricants will solve this problem. These funds are produced in aerosol cans and have a low consistency. Therefore, they act in places that are inaccessible. To pull the drill, you need to inject the lubricant directly for the drill and leave the tool at rest for 10-15 minutes. Then smooth, swaying movements to remove the boat.

You need to remember that before inserting the drill into the punch, you need to lubricate the shank. This will save the cartridge for many years.

Proceedings

Used to break through holes of 45-80 mm diameters in brickwork, concrete and silicate brick. Suitable for laying pipelines and cables.

• The drilling head has the shape of a bell and asymmetric arrangement of the shanks;
• The cutting edge is made of solid alloy;
• Ensuring efficient work is performed by a large spiral with a long conical shank;
• Accurate drilling provides a drill in the center;
• The design of the head is made in such a way as to reduce friction in the hole made, which allows you to perform work much faster;
• Intended for through holes.

The reasons for jamming the drill in the perforator

The need to remove a drill from a perforator occurs when a nozzle is replaced, but sometimes it is impossible. The reason for the wedge is the use of cheap drilling tips. Typically, from the end of the shank they are flooded by a boy (shock bolt), because they are made of low.Quality metal, which is not able to withstand high shock loads. They also bend, twist, break and amenable to other mechanical deformations.

Damaged shank.

A cartridge for a punch for the drill. To understand the device, change

Almost every person has a drill. The tool will help to drill a hole on any surface. So, we will not replace in construction and finishing work, any type of repair of the room.

Reliable and uninterrupted operation of the device is carried out by a cartridge in which a drill, drill or chisel is attached. It is this element that most often fails with prolonged use of the tool.

Accordingly, it is important to choose the right cartridge for a perforator for a drill, be able to remove, replace the clamping device.

SDS start: insert, turn, fix it

This type of clamping device appeared relatively recently-in the 80s of the last century. And is considered the optimal mount for perforators. Accordingly, most of the tools are equipped with them.

The cartridge for the SDS perforator is reliable in operation, easy to handle

SDS perforator cartridge has a number of advantages. Reliable fastening of the drill, which is fixed using two guide wedges, two locking balls. Simple and safe work with a clamping device. Perfect combination of torque and shock force.

Climeing devices of this type are five types. Ordinary and with special categories:

The most demand requires details of the SDS-Plus category. The diameter of the shank drill is 10 millimeters. They are used in tools for drilling light and middle category. These are these often you will find among the instruments of ordinary men. They are preferred to choose small brigades of finishes.

Clound replacement: a few simple steps

If the drill fails during operation, the drill is turning, it is necessary to replace the clamping element with the tool. To do this, it is important to determine its type. After all, the method of fastening the element depends on this. As a rule, the device is mounted on a spindle or on a screw rod. In this case, replacing the cartridge on the perforator is not a difficult matter. Turned. And ready.

If a strong fixation of the part is used, additional tools will be needed. A hammer knock on a screw head. Such a simple action weakens strong fixation. The screw rod is unscrewed using a screwdriver. If the element is attached to the spindle, the element is clamped with the key, the spindle is scroll. That’s the answer to the question of how to remove the cartridge from the punch.

In case of problems, you need to understand what happened to the detail. Accordingly, you need to know how to disassemble a perforator cartridge. First you need to push the plastic part of the part, remove the rubber seal. The next step is a fixing ring. It is easily removed if you put it with a screwdriver. After that, you will need to remove the fixing washer. And one more ring.

If the details use SDS-updates, then it is disconnected simply. Pull a ball, washer, spring. It is in this sequence. To assemble the clamping device, all of the listed actions should be repeated in the reverse order.

You can only assemble the part if the device is regular. Otherwise, you need to know how to change the cartridge on the perforator.

The version of the part depends on how often they use the tool, what type of work is mainly performed. If a drill often has to be changed on a drill, a quick.Sounding element is optimal.

Tough-cage or classic type is ideal for large nozzles.

So, a new detail is screwed on the drill until it stops. After that, the screw is inserted into the nest. Then the device is screwed with a screwdriver.

A punctator cartridge, like any other detail, requires care and attentiveI. If the device begins to junk, does not cope with its functions, delivers chores, it needs to be replaced. Over, to remove, disassemble, change the detail is not difficult. After this procedure, the drill works as a new.

Drill for a perforator: how to insert, remove, fix

With the advent of concrete reinforced structures, external and internal repairs cannot be performed without a perforator. A large number of models of different firms are presented on the market, these are Bosch, Makita, Sturm, Bison, Vorthe, Dexter, Interskol, Caliber, Metabo, Union. Despite the variety, the main nodes and mechanisms work almost the same. The process of reinstalling the working element is also similar. Before inserting the drill into the punch, you need to be able to get it correctly.

The perforator is Universal tool, which has great opportunities. There is a pneumatic device inside it, a pushing piston that comes into contact with a boy. The latter makes the equipment make reciprocating movements. As a result of the nozzles, any surface is destroyed. The presence of a function of the impact allows the tool to make holes in solid materials.

Its purpose depends on the built.In modes: drilling, d some and drilling. There is a toggle switch to switch the modes.

Manufacturers produce models different in weight:

Depends on the size of the perforator Power and shock force.

Why check the performance of the perforator before inserting the drill

Before inserting the drill into the perforator (for example, Bosch brand), you need to make sure its performance, check if there are errors in the work. This is important, because if you work out of improper work, there is a risk of breaking a boumor.

For verification, you need to do several manipulations with the device:

• Put a fork in a socket.
• Turn on the drilling mode on the tool without a fight by pressing the toggle switch to switch modes (usually located on the left side). This is an extreme position.
• Small the start button.

If after turning on the device there are no jerks and failures, then it is efficient, which means that you can put a boumor without fear.

How to insert a drill

The perforator itself also has a fast.Packed mechanism. Reliable fastening of the drill in it is provided with fixation using special balls, which, when closed, are tightly included in the grooves on the lower part of the drill.

In order to fix the necessary nozzle, whether it is a drill or crown, you need:

• Take the lower part of the cartridge down (towards the perforator);
• Holding it in this position, insert the right nozzle;
• Let go of the cartridge.

And to insert a drill into a punch with an adapter, first fix the removable cartridge, which has a mount with grooves for the tool. Then the drill is installed directly. To pull out a drill or drill, you need to perform all the above actions again.

Here I would like to note that any manipulations for the installation and removal of a drill or other nozzles are preceded by a check of the working condition of the perforator mechanism. To do this, the unit must be included in the network and, having set the necessary operating mode, click on the start button. If the unit does not make unusual sounds and at the same time does not feel the extraneous smells of Gary or burned plastic, then the tool is ready to work.

How to insert a drill

The shock drill itself is also the mechanism of rendering release. Reliable fastening of the drill in it is provided with fixation using special balls, which, when closed, fit tightly into the grooves on the day of the drill.

In order to fix the necessary nozzle, whether it be a drill or crown, you need:

• Lower the lower part of the cartridge down (towards the perforator)
• Holding it in this position, stick a suitable nozzle;
• Release the cartridge.

And to stick a drill into a perforator using an adapter, first fix a removable pipe that has a mount at the base with a tool grooves. Then the drill is installed specifically. To remove the drill or drill, it is necessary to fulfill all the above deeds again.

Here I would like to note that at least some manipulations with the installation and removal of the drill or other nozzles are preceded by checking the working condition of the perforator mechanism. To do this, the device must be connected to the network and, setting the desired mode of operation, put the launch button. If the device does not give out extraordinary sounds and at the same time does not feel third.Party smells of flaming or drunk plastic, then the tool is ready to use.

Why is a drill out of a punch?

Quite often, many have a problem when the drill is not securely fixed in the cartridge and begins to fall out of it. I must say right away that if your tool is still under warranty, then it should be attributed to the store for repair. Next, try to figure out what is the cause of the drill and how to fight it.

This problem arises for three reasons:

• Factory marriage in the manufacture and assembly of a perforator;
• Wear of the fixing mechanisms of the cartridge;
• Incorrect tooling of the tool during operation.

If the cause is a factory marriage, then the tool should be given for repairs with the initial detection of the problem. In case of wear of the cartridge, the only guaranteed way to correct the problem is to replace the cartridge. The drill is most likely due to the wear of the fixing elements in the cartridge. Perhaps in the repair workshop they will be able to replace worn fixing balls, and then you do not have to change the cartridge in its entirety. This repair will cost cheaper.

Black and Decker 18v Li-Ion Cordless Combi Drill

To avoid the problem of drill loss, you need to handle the tool correctly when working. Do not forget to periodically lubricate the drill and drill, after work, clean the tool from dust and dirt. When performing work, keep the tool perpendicular to the plane and do not allow distortions. Do not create too much pressure on the tool.

The operation of the perforator

How long the perforator will serve, depending on the observance of all the rules of its operation. When working with a material such as concrete, you should not save money on the lubrication of the tool. If the tool is out of order, it must be handed over to the service center. Even if it is not damaged, from time to time it is worth taking it for verification to the masters.

Keep in mind that some malfunctions provoke injuries, this is especially true for powerful perforators with a strong blow. If the drill in the perforator was very jammed, or you are not completely sure of your abilities, it is also better to seek help from qualified specialists!

To clean the tool from construction dust, you can use the vacuum cleaner. When using a perforator, it is worth remembering the recreation mode, the device has the ability to heat up even at low speeds. Follow the instructions that are attached to the device.

Given all of the above, we can draw certain conclusions that an independent insert of the drill into a punch is a very simple procedure. Also remember that under the legislation, a punch can only be used after seven in the morning and until eleven o’clock in the evening. Try to carry out repair processes on working days from nine in the morning and end them until seven in the evening.