How to line a Viking trimmer

How to replace line in any trimmer

Technological progress provides us with a lot of opportunities to get rid of manual labor. This includes, among other things, mowing grass, which required a lot of physical energy when using a conventional scythe. In modern conditions, this process is much easier, because the applied technique minimizes all costs. Devices such as electric and petrol trimmers have firmly taken the place of irreplaceable assistants in gardening. Mowing grass with their help has become more fun than hard and exhausting work.

Structurally, the trimmer consists of an engine, a rod and a working body, which, depending on the vegetation being cut, is either a mowing head or a milling disc. And if everything is more or less clear with the cutter, then sometimes questions arise with the nozzle. As a rule, they appear when the line ends.

How to properly wind the line on the reel? Understanding.

So, first unscrew the nozzle. This should be done by rotating the drum to the right. Here we have a drum with the remnants of an old fishing line in our hands. We open it. Most often, the lid is closed with latches that can be opened with a screwdriver, threading it through the holes and slightly pressing. Or you need to squeeze the latch and turn the cover in the direction of the arrow. In this case, the lid itself must be held, since reels with automatic line feed have a spring that, when straightened, can throw out all the inner parts of the drum. Gently pulling out the reel, remove the scraps of fishing line from it.

Now you need to take 5 meters of new line and fold it in half (to find the middle). In the middle part of the reel there is a notch (in some designs. a hole), for which we need to hook our fishing line. There is also an arrow on the spool showing the direction of winding. An important detail. if the reel has two compartments, then one half of the line should be wound in one direction, and the other in the other. When finishing winding, you need to leave 15-20 cm of fishing line free. There are also two notches on the top ring of the coil, through which these free ends need to be passed. We dealt with the winding itself.

The last step in the line replacement process is to assemble the drum. First you need to install the spring and washers in their place. Then, holding the reel with one hand, with the other you need to thread the ends of the line into the corresponding holes on the sides of the nozzle. After that, install the coil in its place, pulling the line and being careful not to dislodge the spring. When all the internal elements of the nozzle take their places, you can close the drum with a lid. You just need to make some effort to ensure that the latches fall into place. Voila! The mowing head is ready for use!

  • What is a trimmer?
  • How to choose a fishing line?
  • Removing the spool from the trimmer
  • How to wind the line on the reel of a lawn mower?

Modern power tools help to facilitate human labor several times. So, for example, thanks to the trimmer, you do not have to mow the grass by hand, and the lawn will quickly and effortlessly become well-groomed and beautiful. For some people, a trimmer can help turn tough physical work into real fun. But what to do when the main cutting material runs out? Agree, not every person will immediately understand how to properly thread the line onto the reel of a lawn mower. For each type of coil, a corresponding nylon thread is needed and the replacement rules are completely different. Today we will consider all these issues in more detail.

What is a trimmer?

So let’s take a look at the trimmer varieties. They are of two types:

  • Electric powered.
  • Gas tank fed.

Fishing line or knife. perform a cutting function in this device. In turn, the nylon thread can be as follows:

  • Ordinary thread.
  • With four or five faces.
  • Intertwined (looks like a pigtail).

But a knife in a petrol cutter can be:

  • Two-bladed.
  • Three-bladed.
  • Four-bladed.

According to the material of manufacture, knives are divided into:

  • Metallic.
  • Plastic.

Line feed from a reel is:

  • Manual type.
  • Semi-automatic.
  • With automatic feeding.

Important! The ranking of the most bought electric lawn mowers is as follows:

  • ALKO.
  • Bosch.
  • Vitals.
  • Iron angel.
  • Daewoo
  • Stark.
  • Hyundai.
  • Centaur.

line, viking, trimmer

Removing the spool from the trimmer

Now we will consider the issue of removing the hairpin from different types of trimmer:

  • The bottom motor powered conveyor has two buttons on the sides. With one press of two buttons, you will need to detach one part of the gas station from the other. Simultaneously with the first half, remove the inner part, on which the core is wound.

Important! When doing the described manipulations, you need to be extremely careful so that the inner spring does not accidentally fly out and rub. This little detail is a very important “link” to help you pull the line onto the roller.

  • The body of an electric and gasoline conveyor with a bent metal bar should be wrapped around with one hand, and with the other, the electronic wing should be moved counterclockwise. This small piece connects the reel to the trimmer bar. After removing the lamb, it is necessary to remove the entire coil, while holding the inner spring with your fingers.
  • For an electric and ashless conveyor with a straight bar, you need to find a recess under the bobbin, insert, for example, a screwdriver into it, and slowly rotate it until the tool goes deeply and the roller is completely fixed. Next, turn the coil slowly clockwise (due to the left-hand thread) and remove it from the conveyor. Then you will need to disassemble the bobbin, assembled by snaps or twisted into a lamb. If you have a snap-on roller, then you need to push the latch on the sides to release the two parts of the part. After that, you should unscrew the lamb.

How to tuck line into a trimmer reel. petrol cutters?

How to choose a fishing line?

For each trimmer power, the developers accurately calculate the nylon thread diameter and the number of blades for the corresponding knife. Otherwise, the motor of the power tool will be severely overloaded, which will lead to its breakdown. Unknowingly, an overpayment for consumables will be provided to you. That is why the choice of line for your trimmer must be treated responsibly in order to keep costs to a minimum.

At the very beginning, you need to purchase the appropriate line. It is sold in skeins up to 120 meters long, and its diameter will be indicated in the detailed instructions for your trimmer.

Here’s what to look for when choosing a line and trimming it:

  • Most often, a 2 mm conductor is used for cutting grass with a trimmer. For mowing soft and young grass, it is enough to take a thin line, the diameter of which is 1.5–1.8 mm. But on more powerful lawn mowers you need to reel thicker fishing line.
  • Do not forget to pay attention to the structure of the vein. For example, round cord is considered the most durable and copes well even with the toughest weeds. But the vein of a curly configuration is more suitable for young or twisted grass. A thread with notches along its entire length can only work with thin stems.
  • The minimum length for one threading of nylon thread into the mower spool is 2-4 meters, depending on its diameter and the manufacturer’s recommendations. For example, if you wind too much line on the bobbin, then its movement will be difficult, and in the process of mowing the grass, you will notice new ends of excess material.
  • It is advisable to buy only approved companies. which are listed in the recommendations of your mowing appliance. It must be made of high quality material and have good durability. it is good to “mow” the lawn and not wear out very quickly.

In order to increase the elasticity and strength of the cord, place the purchased thread in water for 30 minutes. Thanks to such actions, it will be difficult for you to break even the thinnest core.

How to wind the line on the reel of a lawn mower?

Steps for a roller with one tendril:

  • To begin with, we unwind from 2 to 4 meters of nylon thread. Its length depends on the size of your coil.
  • We find a hole on the inside of the roller. which fixes the vein. We insert one end of the nylon thread into it and begin to carefully wind it in the opposite direction to the rotation of the bobbin on the device. Sometimes an arrow is drawn on the inside of the spool indicating the direction of winding the line.
  • After part of the core is already on the coil, we leave the rest of it (5-10 cm) free to expose it outside.
  • We fix the tip of the core in a special groove (groove). You will find it on the inside of the coil. If you do not have such a groove that holds the cord, then you need to hold the line with your finger.
  • Now we take the outer part of the coil. we slowly pass a segment of the “hanging” core into the existing hole. The nylon thread is now wound on the bobbin.
  • We put the roller on the conveyor.

Steps for a roller with two antennae:

  • We look at the inside of the bobbin. determining the number of grooves for the core. The coil can have either one groove or two. Two antennae are wound along one hole at the same time. And a tendril is wound on a bobbin with two holes, which must travel along a separate groove. The roller with one groove has one through groove, along which the line slides.
  • We unwind 4 meters of a new nylon thread. we pass it through a double hole so that the line segments from each part are the same.
  • Now we wind the two ends of the core in a single direction, which should coincide with the direction of the pointer drawn inside the coil (arrows).
  • We leave a small part of the core for stock. We fix its ends in the grooves.
  • Slide the 2 ends of the cord into the groove on the outside of the roller.
  • We collect all the components of the roller and attach it to the trimmer bar.

Important! If the conveyor has two grooves, then you need to fold the section of the core in half, and insert the loop obtained at the bend into the groove that is located between the two grooves. After that, both cuts of the line should be wound at the same time, each in its own “way”. All further actions should be done in the same way as the above instructions.

Actions for a roller with a core threaded through a double-sided hole located on the inside:

  • We thread the ends of the new nylon thread through the hole on the outside of the roller without winding.
  • We collect the reel and press the button for further release of the core as it gradually wears out. When you rotate this button, the line itself winds inside the bobbin.

Important! If you do such winding often, then you can wind the nylon thread without disassembling the drum. To do this, you just need to combine the double-sided groove of the inner part with the grooves of the inner roller body, and then thread the same fishing line through them.

As you can see, it is quite possible to wind the core on the trimmer coil yourself. The winding technique depends on the type of your lawn mower and on the design of the reel itself. Below we offer you a video that will help you better understand the whole process and perform high-quality line refueling in your device.

Overview:

Instructions for viking te-700 Download. Instructions and guidelines. Tool shop »Lawn mowers, trimmers» Electric trimmers »Viking TE 1000 trimmer. What to buy with Viking TE 1000 trimmer.

A score of 10/10 is given if viking te 1000 is technically the best in its field, has the best quality or offers the largest range of features.
replacing spool on viking te 600. Garden question. Do you mean the symbol above the scissors on the infodisplay? If that is the blinking indicator, then the top thread has broken or the spool is empty.

How to disassemble the trimmer coil. Changing the line on the trimmer.

Summary:

portable trimmer; electric motor (540 W) from mains cable; cutting width: 35 cm; weight: 3.9 kg

ugra.ru

Comments 12

I would add something else, of course, but in fact, almost everything is said.

I agree, a wonderful phrase

I agree, this great thought will come in handy.

I have not heard of this yet

I join. It was with me too. Let’s discuss this issue. Here or at PM.

Great, this is a very valuable message.

I protest against this.

there are some rules.

Respect respect blogger.

Add comment Cancel reply

  • (the black)
  • one hundred
  • 1000
  • 2.0
  • 200
  • 300
  • 500
  • ABS
  • ASUS
  • Audio
  • Benro
  • Blue
  • Bluetooth
  • Bosch
  • Box
  • Brother
  • Bulros
  • Canon
  • Case
  • Cisco
  • Classic
  • Digital
  • DVD player
  • Electric
  • Electrolux
  • Epson
  • Falcon Eyes
  • Galaxy
  • Garmin
  • HAMA
  • HUAWEI
  • IPhone
  • Kit
  • LED
  • Levenhuk
  • Light
  • Master
  • Mini
  • Nikon
  • Office
  • Panasonic
  • Philips
  • Pioneer
  • PLA
  • Plus
  • Power
  • Premium
  • Pro
  • Pro sKit
  • REXANT
  • Samsung
  • Series
  • Silver
  • Smart
  • Sony
  • Style
  • SUPRA
  • TV tuner
  • Ultra
  • VoIP phone
  • White
  • Wi-Fi router
  • Xiaomi
  • A4,
  • Car
  • Adapter
  • Battery
  • Accessories
  • Acoustic system
  • Antenna
  • Art.
  • Audio cable
  • White
  • Wireless
  • Binoculars
  • Block
  • Bracelet
  • Trinket
  • Paper
  • Hob
  • Webcam
  • Fan
  • Video camera
  • Vinyl
  • Wine
  • External
  • Water
  • Flush-mounted kitchen sink
  • Flash
  • Built-in
  • Gamepad
  • Grill
  • Door
  • Double
  • Holder
  • Child
  • Houses
  • Home
  • Board
  • HDD
  • Castle
  • Charging
  • Charger
  • Green
  • Playroom
  • Integrated amplifier
  • Interactive
  • Infrared heater
  • Cable
  • USB cable
  • Balanced audio cable
  • Coaxial cable
  • Microphone cable
  • Camera
  • Chimney hood
  • s
  • Map
  • Cartridge
  • Book
  • Ring
  • Switch
  • Complex
  • Set
  • Computer
  • Computer case Black
  • The envelope
  • Controller
  • Skates
  • Box
  • Red
  • Fastening
  • Bracket to wall
  • Laminator
  • Lamp
  • Tape
  • License
  • Magnifier
  • Magnetic
  • Marker
  • Motherboard
  • Car
  • Typewriter
  • Media player
  • Metal
  • Weather station
  • Microwave
  • Microscope
  • Chip
  • Microphone
  • Mm)
  • Mm,
  • Mobile
  • Model
  • Module
  • Monopod
  • Music Center
  • Mouse
  • Set
  • Navigator
  • Storage device
  • Storage water heater
  • Outdoor
  • Wrist Watch
  • Nozzle
  • Wall
  • Board game
  • Headphones
  • Knife
  • Laptops
  • Lens
  • Optical Drive Black
  • Office
  • Air purifier
  • Glasses
  • Package
  • Panel
  • Adapter
  • Printing
  • Power supply
  • The tablet
  • Plastic
  • Plastic
  • Player
  • Gift
  • Backlit
  • Stand
  • Pillow
  • Shelf
  • Polarizing
  • Portable
  • a printer
  • Projector
  • Processor
  • Remote controller
  • The size
  • Connector
  • Frame
  • Walkie-talkie
  • Repeater
  • Socket
  • A pen
  • Manual
  • Backpack
  • Napkin
  • Alcohol mashine
  • Lamp
  • LED
  • Selfie
  • Grey
  • Network
  • Signal
  • Blue
  • Cooling system
  • Scanner
  • Folding
  • Dictionary
  • Cm)
  • Cm,
  • Smartphone
  • Mixer
  • Split system
  • Glass
  • Stand
  • Washer
  • Rack
  • Table
  • Studio
  • A bag
  • Nameplate
  • TV set
  • Telephone
  • Thermometer
  • Trimmer
  • Trumpet
  • Curbstone
  • Humidifier
  • Universal
  • Exterminator
  • Gains
  • Amplifier
  • Device
  • Iron
  • Filter
  • Flash drive
  • Camera
  • Cameras
  • T-shirt
  • Fridge
  • Color
  • Color:
  • Color
  • Digital
  • Kettle
  • Clock
  • The black
  • Case
  • Mop
  • Sewing machine
  • Cupboard
  • Gateway
  • PCS.
  • Tripod
  • Manfrotto tripod
  • Brush
  • Forceps
  • Screen
  • Electric
  • Electric shaver

How to tuck the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models by the filament feeding system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted into a specially designated place, and then the cutting attachment must be wound using the visual cues on the spool indicating the direction. At the end of all the work, the lid, of course, will need to be tightened.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in those places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular suburban area.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass) or be equipped with notches ideal for thin grass in diameter.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

What is a trimmer?

This equipment is based on the following elements:

  • motor, the main function of which is to rotate the cutting head at the end of the rod;
  • directly the head, consisting of a coil, on which either a fishing line or a knife can be wound;
  • knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with source of electrical energy. The main positive aspects of such equipment are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. There is no need to use electricity here, which has a positive effect on the functionality of such an apparatus. the cutting attachments can be changed, working with weeds of various types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

How to quickly remove the coil from the tool

Before the thread is wound on a bobbin, it must be removed. over, the removal methods depend on the characteristics of the instrument. On trimmers with a motor near the ground, the reel has two side buttons, when pressed, a part of the body is separated together with a thread winding device.

On tools with a curved bar, the lamb on the device is moved counterclockwise; having disconnected it, they remove both the bobbin and the spring inside it. On trimmers with a straight bar, fix it with a screwdriver, rotate it clockwise and remove it. Then the device is disassembled either using latches or by moving its parts in different directions. Take out the spring from the coil.

Briefly about the line

Taking into account the models of the tool, the thickness of the line is 1.2-4 mm. There are such configurations of it:

  • round. the most durable;
  • curly. for soft grass;
  • twisted or serrated. for thin grass;
  • professional, not suitable for all instrument models.

When changing the cutting thread, choose the one that suits your trimmer type. Preference should be given to specialized. Before tucking the line into the trimmer spool, it is best to soak it in water for half an hour. Then it will become more elastic and stronger.

How to tuck the line into the trimmer so that working with it does not get tired

Many summer residents use a trimmer to combat weeds. a scythe with an electric or gasoline engine. It is convenient when working in hard-to-reach places for a lawn mower: near fences, flower beds, houses, in a garden on narrow aisles, and can cut small branches. The main element of this miracle technique is an ordinary fishing line, wound on a reel. The device is simple, but the cutting part wears out quickly and needs to be replaced. And the question of how to fill the line in the trimmer worries many owners of summer cottages.

Threading the line into the trimmer

The main question is how to properly wind the line on the trimmer reel, securely fixing it there?

In the case of a device with one antenna, up to four meters of fishing line is unwound, inserted into the hole inside it, which fixes the fishing line, one end of it, and moved in the direction indicated by the arrow. The end of the thread is fixed in a groove inside the bobbin so that it does not unwind during assembly. If there is no groove, then this free end is secured with a finger. Then the coil is assembled.

How to thread a trimmer coil if it has two antennae? In this case, they check how many grooves there are on it. one or two. In the first case, both antennae are directed into a common groove, if there are two of them, then each of them into its own. 2-4 meters of thread is passed through the hole in such a way that the free ends of the thread are of the same length, and twist the bobbin in the direction of the arrow-pointer. The ends of the thread are inserted into the grooves or held with a finger, the device is assembled and attached to the trimmer.

In a spool with two grooves, the same piece of thread is folded in the form of a loop, sent to the groove between them and the ends are wound at the same time. Then repeat the previous assembly. With semi-automatic winding, the bobbins operate as follows. The fishing line is passed through the hole inside, its ends are fixed in the holes on the body, collect it and press the button. This allows the thread to be easily wound in the correct direction.

It is important to remember that the cutting surface must be protected from hard objects so that it does not wear out. Otherwise, it will be necessary to constantly stop and, having removed the reel, replace the used line. Keep your job fun and enjoyable!

See How to attach line to trimmer

How to change the line in the trimmer and which one is better to choose

Since we examined the choice of a trimmer in the previous article, today we will tell you how to properly fill the trimmer with fishing line, and which one is better to choose based on the working conditions.

After you bought a trimmer and began to actively use it, sooner or later the question of replacing the fishing line will arise, since this is the most wearing element in the tool, intensive use of the trimmer will lead to frequent replacement of consumables.

What types of woods are there

The most common type of line that fits almost all reel types is round cord. This is an ordinary fishing line, suitable for mowing succulent grass, but it will be much more difficult to mow dead wood with it, and even more so it will not cope with bush.

As a rule, the diameter that can be used to cut young grass does not exceed 1.6 mm. The thicker the thread, the more coarse grass it is able to overcome.

There are fishing lines with sharp edges in the form of an asterisk or a square, this option is more adapted to mowing dry grass just due to the existing sharp edges, but its disadvantage is greater wear and is inferior in strength to a round cord.

There are fishing lines with improved aerodynamics with characteristic dents, scales and notches, such a product makes less noise, but it is used only on petrol cutters, since the exit of such a thread from the reel is difficult, it is used most often with discs into which segments are inserted. The disadvantage of such a product is its fragility.

Most often in gasoline trimmers with an engine with an output of more than 1.5 hp. use cords with a metal cable inside.

This thread is ideal for cutting dry grass and small bushes. The presence of a core has a positive effect on the wear resistance of this material.

The disadvantage of such a cord is its price, which is significantly higher than the above opponents.

How to remove or tuck the line into the trimmer

In order to wind the line, it will take about 10-15 minutes. What is a trimmer coil? Plastic body with a cassette inside, on which there is a special hook for easy winding of the fishing line.

Almost all trimmer reels have a similar fastening principle, this is a central screw-button, when pressed, it becomes possible to pull out the line of the required length. The photo below shows a few examples of different trimmer spools.

The bobbins of the trimmers, the motor of which is located at the very ground, have a different attachment to the axis of rotation, they have two buttons on the spool located on the sides that need to be wrung out, otherwise the replacement of the thread is no different from other cassettes.

The principle of correct winding of the fishing line is similar in all of the above cases, therefore, for example, consider the standard version with two antennae.

To remove the spool with the fishing line, you need to unscrew the centrally located screw, but note that the thread is left there, so you will have to turn it clockwise, this was done on purpose so that during operation it does not open under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and remove the spool onto which the fishing line is directly wound.

Having measured the required length and folded in half, you need to tuck the fishing line into the spool, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, it is necessary to assemble the head in the reverse order, threading the ends of the cord into two corresponding holes.

If you have any doubts or it is not entirely clear how to load the line on the trimmer, we recommend that you look at how to properly wind the line in the petrol cutter.

In this video, in detail, step by step, the instructor will open the trimmer head, measure the required amount of line, usually from two to four meters, and demonstrate assembly and installation on the trimmer.

Trimmer Viking TE 600. the advantages of a garden tool

This Viking model is used extensively by gardeners to maintain small flower beds, level grass on decorative walkways, and control dense growth in greenhouses. Despite its low power, this garden tool is able to control weeds with stems up to 2 mm thick. The improved rotor system of the electric scythe easily transfers short-term high loads without harming the main working mechanisms of the model.

The Viking trimmer in this household package is equipped with an ergonomic D-shaped handle with soft rubber inserts. If necessary, its position can be adjusted using a bolted connection.

The main parameters of this Viking electric scythe include:

  • factory engine power. 600 watts;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 7400 rpm;
  • permissible diameter of the fishing line used for mowing. 2 mm.

The minimum weight of this hobby tool gives its owner the ability to lift and hold the trimmer upright to remove the stems of climbing weeds.

Trimmer Viking TE 700. model complete set

This popular hobbyist Viking model was initially set up by the manufacturer to work in hard-to-reach places. Small dimensions, together with sufficient power, make it possible to use the electric scythe to combat young dense shoots, few weeds, as well as small shrubs. Thanks to the high precision of the rotary system, the trimmer can be used for trimming decorative lawns and walking paths, as well as for removing excess vegetation in flower beds and greenhouses.

The factory equipment of the garden tool includes a robust electric motor, pre-equipped with protection against overheating and dust ingress. The engine is distinguished by minimal vibration during operation and almost complete absence of noise.

For ease of use, the manufacturer has equipped the trimmer with an ergonomic handle with soft anti-slip inserts. The height of the handle can be adjusted. The basic set of the tool includes a durable drag mechanism, which makes it possible to expose the cutting bodies for cutting grass in the desired direction.

Элекротриммер Viking TE 700. Ремонт.Смазка выходного вала.

The basic parameters of this Viking electric scythe include:

  • factory engine power. 700 watts;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 7500 rpm;
  • permissible diameter of the line used for mowing. 2 mm.

Almost all garden tool parts are made of aluminum or laminated plastic to withstand heavy impacts, falls and heavy loads. The simplicity of the model makes it possible to replace worn parts without the help of specialists.

Running in a mower

Devices running on gasoline engines need to be run-in. These measures will not take much time and effort, but will have a positive effect on the life of the motor in the future.

Activities during the break-in:

  • Fill in the fuel mixture;
  • Lubricate the gearbox;
  • Start the engine and let it run for 5 minutes, then perform a gas cycle. Perform actions for 15 minutes;
  • Turn off the engine and take a break for 20 minutes;
  • You can mow for 5 minutes, then rest for 5 minutes. Complete 4 sets.

If there are no problems, then the mower can be considered ready for use.

To avoid overheating of the motor, you need to adhere to the rules of alternation, where the working mode and rest is a ratio of 15×15 minutes. If the air temperature is high outside, then you need to work less and rest more.

Read more in the engine operating instructions.

Robot lawn mowers

Technology does not stand still and to minimize human participation in the mowing process, the Viking brand has developed fully automatic models of robots that mow the lawn.

You only need to program the device and you can go about your business. The intelligent system will notify the owners in case the unit is attempted to be stolen.

In case of rain or when the battery charge drops to a minimum, the robot returns home by itself. The MI 632 model is equipped with a 194 W battery, which allows you to successfully cultivate up to 0.4 hectares.

Features of using gasoline models

Viking lawn mowers run on gasoline. Any clean, fresh, unleaded AI gasoline with an octane rating of at least 77 is suitable for refueling.

It is advisable to buy gasoline based on monthly storage, because otherwise condensation will begin to form in the canister and the quality will deteriorate.

The equipment enters the pre-sale network without oil, so it is important not to forget to pour the required amount of lubricant into the engine before the first operation.

After some time, the oil is replaced with a new one. information about the replacement time is written in the instructions. Used branded engine oil VIKING HD 10 W-30.

It is advisable to use special consumables, low-quality oils can lead to difficulty in starting, and subsequently to breakdown.

TOP-2 trimmers and other Viking brand lawn care tools

The range of products of the brand “Viking” is represented by the following categories of our website:

See below for the models in each category.

Trimmer Viking TE 1000. model description

The Viking hobby trimmer is used for edging and trimming decorative lawns, flower beds and walkways. The garden tool comes with an ergonomic handle that can be adjusted to suit the operator’s height. The model is equipped with a yoke mechanism to guide the cutting bodies. This solution makes it possible to protect the bark of trees and flower stems from accidental damage.

The Viking 1000 trimmer is equipped with a powerful motor, the speed of which can be adjusted electronically. The motor is equipped with effective overload protection, which prevents unexpected damage to the motor during intensive operation in hot weather.

Specifications for this hobby tool include:

  • factory engine power. 1 kW;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 8000 rpm;
  • permissible diameter of the line used for mowing. 2 mm.

How To Refill A Stihl AutoCut C5-2 Linehead – Video

The internal elements of the electric scythe are reliably protected by a reinforced plastic case, which can be disassembled using the key from the kit.

Contents of delivery:

  • Protective cover for cutting attachment
  • Mowing head AutoCut 5-2
  • Key for assembling, disassembling the scythe
  • User’s manual
  • Warranty card for 2 years

Electric trimmer STIHL FSE 71 (4809 011 4115) with line

The FSE 71 electric scythe is a reliable and unpretentious helper on your site, its beautiful design and functionality will leave you indifferent. The brushcutter is perfect for working in small areas, in the adjacent area near your home, or in places where the noise level does not allow working with gasoline cutters. The scythe sits comfortably in the hands and does not slip due to the rubberized control handle on both sides, the second handle is located on the shaft, has a D-shape and is easily adjustable in height for people of different heights.

Advantages of the electric trimmer 71:

  • A special system that prevents the engine from overloading, the scythe is simply turned off in case of an excessive amount of work
  • The motor is located on the top of the boom, which protects it from damage and shock
  • A convenient curved bar with a flexible shaft will allow you to get to hard-to-reach places, just as if various obstacles hit the cutting head of the scythe, you can not be afraid of bad consequences, since the flexible shaft will take all the load
  • The braid is very light and easy to use, even children can handle it
  • To fill in the mowing string, you can without disassembling the head into its component parts, just insert 2 ends of the fishing line into 2 holes and wind the fishing line counterclockwise
  • On the case there is a holder for a shoulder strap, which will greatly facilitate the work with the unit
  • Convenient hook for attaching a network carrier, protects against accidental power off

Suitable headset for scythe:

  • Mowing head AutoCut C 6-2, recommended line diameter 2.0 mm, can be combined with 2.4 mm
Cable length m:

Power consumption W:

Rated voltage V:

Standard cutting tool:

Total length m:

Weight, kg :

Sound pressure level dB (A):

Sound power level dB (A):

Vibration level left / right m / s²:

NOTE:

0.500 0.050
540
230
AutoCut C5-2
153
four
83
93
3.3 / 2.9
The range of products and information given may differ depending on the export version. Possible constructive and technological modifications of the tool and equipment, as well as price changes.
  • At any time you can contact us by multichannel phone: 7 (495) 641-75-73; 7 (965) 204-35-39.
  • Self-pickup is carried out at the address: Moscow, st. Yeniseiskaya, 11.
  • Pickup point working hours: Monday. Friday from 10:00 to 19:00, Saturday. Sunday by appointment.

Trimmer Viking TE 1000. model description

The Viking hobby trimmer is used for edging and trimming decorative lawns, flower beds and walkways. The garden tool is equipped with an ergonomic handle that can be adjusted to suit the operator’s height. The model is equipped with a yoke mechanism to guide the cutting bodies. This solution makes it possible to protect the bark of trees and flower stems from accidental damage.

The Viking 1000 trimmer is equipped with a powerful motor, the speed of which can be adjusted electronically. The motor is equipped with effective overload protection, which prevents unexpected damage to the motor during intensive operation in hot weather.

Specifications for this hobby tool include:

  • factory engine power. 1 kW;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 8000 rpm;
  • permissible diameter of the line used for mowing. 2 mm.

The internal elements of the electric braid are reliably protected by a reinforced plastic case, which can be disassembled using the key from the kit.

Viking. brand history

Known in Europe and far beyond its borders, the Austrian company Viking was founded in 1981 by Heinrich Lechner. A small business based in Kufstein, specialized in the production of inexpensive garden shredders.

4 years after the founding of the company, the design department of the company designed the first own lawn mower. Soon, the company launched an active production of lawn mowing equipment, which helped the brand gain recognition in Europe.

Today the Viking company is known for the production of a large number of different types of garden equipment. The list of brand products includes cultivators, aerators, garden tractors. Viking trimmers are in great demand among gardeners. Each electric streamer of the Austrian manufacturer differs from its market counterparts in increased reliability, low vibration and noise levels, as well as good factory parameters, which makes this technique in demand almost all over the world.

Trimmer Viking TE 600. the advantages of a garden tool

This Viking model is used extensively by gardeners to maintain small flower beds, level grass on decorative walkways, and control dense growth in greenhouses. Despite its low power, this garden tool is able to control weeds with stems up to 2 mm thick. The improved rotor system of the electric scythe easily transfers short-term high loads without harming the main working mechanisms of the model.

The Viking trimmer in this household package is equipped with an ergonomic D-shaped handle with soft rubber inserts. If necessary, its position can be adjusted using a bolted connection.

The main parameters of this Viking electric scythe include:

  • factory engine power. 600 watts;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 7400 rpm;
  • permissible diameter of the line used for mowing. 2 mm.

The minimum weight of this hobby tool gives its owner the ability to lift and hold the trimmer upright to remove the stems of climbing weeds.

Trimmers Viking (Viking)

Viking trimmers are well suited for domestic use in small areas of the local area. Models of this brand show high speed of operation, an even cut line of any type of wild vegetation and modest power consumption. Viking trimmers have a high quality factory assembly, which significantly increases their working life and minimizes the risk of breakage.

Trimmer Viking TE 700. model complete set

This popular hobbyist Viking model was initially set up by the manufacturer to work in hard-to-reach places. Small dimensions, together with sufficient power, make it possible to use the electric scythe to combat young dense shoots, few weeds, as well as small shrubs. Thanks to the high precision of the rotary system, the trimmer can be used for trimming decorative lawns and walking paths, as well as for removing excess vegetation in flower beds and greenhouses.

The factory equipment of the garden tool includes a robust electric motor, pre-equipped with protection against overheating and dust ingress. The engine is distinguished by minimal vibration during operation and almost complete absence of noise.

For ease of use, the manufacturer has equipped the trimmer with an ergonomic handle with soft anti-slip inserts. The height of the handle can be adjusted. The basic set of the tool includes a durable drag mechanism, which makes it possible to expose the cutting bodies for cutting grass in the desired direction.

The basic parameters of this Viking electric scythe include:

  • factory engine power. 700 watts;
  • grass cut width. 35 cm;
  • maximum rotation speed of the cord / cutting knife. 7500 rpm;
  • permissible diameter of the line used for mowing. 2 mm.

Almost all garden tool parts are made of aluminum or laminated plastic to withstand heavy impacts, falls and heavy loads. The simplicity of the model makes it possible to replace worn parts without the help of specialists.