How to make a hole in the wall without a drill

Tips from the experts: How to drill a concrete wall with an ordinary drill

Almost every home handyman can face the problem of how to drill a wall of concrete with an ordinary drill. The lack of the necessary tools to perform this work and lack of experience often leads to disastrous results: the drill breaks, and the hole in the wall and does not work. To easily cope with the task at hand, the home craftsman should use the recommendations of the experts presented in the article.

Concrete structures have high strength, include particles of gravel, which is why it is impossible to destroy them with an ordinary drill bit.

During the process, the drill encounters areas of high hardness, and the work stops.

That is why impact drills or rotary drills are used for drilling.

But in domestic conditions for a small amount of work to purchase expensive tools is not reasonable, the hole in the concrete can be drilled and without perator. Under home conditions, it is quite possible to get by with a simple drill with special attachments:

• Steel punch. used when a conventional drill gets stuck in particularly tough areas. Is a special rod with a sharpened tip of high hardness. The drill bit is inserted into the hole to be drilled and hit with a hammer, breaking up the hardest parts. You can also use a long drill bit with a pobedite tip as a puncher.
• Pobedite drill bit. has a tip made of a metal characterized by particular strength. These drills are best for concrete. Drill tip is made of carbide-tungsten-cobalt alloy.
• Diamond drills are high-performance nozzles for drilling in rubble and beta. Diamond drill bits are mounted on a regular drill or on a percussion drill when working with vibration off. Diamond drill bits are expensive, so they are not worth buying for occasional use.
• Core bits with tungsten carbide coating. used exclusively with power drills. At home use crowns with a diameter of 120 mm, professionals use nozzles with a larger diameter. For concrete, experts recommend using crowns with teeth of a separate solder. If in the thickness of the wall is found iron armature, the bits are not recommended, as teeth will break off.
• CS: GO crowns. their edge is covered with crystal diamond particles, allowing you to drill concrete structures.

IMPORTANT. To obtain holes with a diameter greater than 12 mm and a depth of more than 110 mm, it is not recommended to use an ordinary drill. Without a peorator or percussion tool, you can not make a large hole in the concrete or through hole.

Step by step instruction

Scheme of drilling

How to make a hole in a concrete wall or a slab on the ceiling without a peorator or other similar tools?

Despite the presence of a special drill, the work on the concrete wall is carried out taking into account the recommendations of experts.

The wrong approach can lead to tool breakage and partial destruction of the wall. Before starting work, prepare the following set of tools and materials:

• a drill with sufficient power;
• Drill bit with pobeditovye (carbide);
• punch. a metal pin of the desired diameter;
• Hammer or sledgehammer;
• Vacuum cleaner.

The process of drilling concrete with an ordinary drill is not fast, so the home handyman should have patience. Concrete dust is eaten into the flooring, and to keep the surface clean, it is recommended to cover it with newspaper. Vacuum up the spilled particles periodically. The sequence of work is as follows:

• A suitable drill bit is mounted on the tool. Mark the drilling point on the wall.
• Mark the drilling point, working at minimum speed, with light pressure. In the surface make a small hole, so that the drill does not slip during reinforced actions.
• Deepen into the wall for 8-10 mm. While drilling, the tool is held at a right angle. If you tilt it, there is a risk of damaging the surface, the drill tip or your hands.
• Take out the drill bit and pierce the concrete with a steel rod.
• Deepen into the wall for another 10-15 mm and once again finish the concrete with the piercing tool. After each step, the drill bit is cleaned of concrete particles.

IMPORTANT. Each step of drilling must not take more than 30 seconds. The total duration of continuous drilling with a low-powered tool. no more than 10-12 minutes. The motor of the tool should be cooled after each session, otherwise it will overheat and fail.

Drilling through concrete with a diamond drill bit can be viewed at

In this video the author explains how to drill through concrete without hammering:

Drilling holes in the wall correctly: general rules and recommendations than to drill

In order to correctly drill a wall, it is necessary to take into account the material of which it is made, based on this it is necessary to select a tool.

• Hold the tool correctly when working. For example, the drill in the hands should be straight, and enter the surface in a vertical direction;
• use an extra handle for convenience;
• depending on the surface material, choose the right drill bits.

• concrete, stone, brick wall. use carbide drill bit, more often pobeditovye;
• metal. metal drill bit;
• tile, ceramic tile. special drill bits for these materials, sometimes can be replaced by a concrete drill bit with a pobedite build-up;
• Wood chipboard, wood. for holes less than 10-12 mm, a drill for metal is suitable, for larger ones, special drills for wood are used.

Step-by-step instructions

How to make a hole in a concrete wall or slab on the ceiling without a peorator and other similar tools?

Despite the presence of a special drill, the work on the concrete wall is carried out taking into account the recommendations of experts.

The wrong approach can lead to tool breakage and partial destruction of the wall. Before starting the work, prepare the following set of tools and materials:

• a drill with sufficient power;
• drill bit with pobedite (carbide) cladding;
• Puncher. a metal pin of the required diameter;
• hammer or sledgehammer;
• vacuum cleaner.

The process of drilling concrete with an ordinary drill is not fast, so the home craftsman should have patience. Concrete dust is absorbed into the floor coating, and it is recommended to cover the surface with newspaper to keep it clean. Vacuum up the spilled particles periodically. The sequence of work is as follows:

• On the tool set the appropriate drill. Mark the drilling point on the wall.
• Mark the position of the drill, working at minimum rpm, with light pressure. Make a small hole in the surface, so that the drill does not slip during hard drilling.
• Deepen into the wall by 8-10 mm. Hold the tool at a right angle during drilling. There is a risk of damaging the surface, the tip or your hands if it is tilted.
• Take out the drill bit and pierce the concrete with a steel rod.
• Deepen into the wall for another 10-15 mm and again finish the concrete punch. After each stage of work, clean the drill bit from concrete particles.

IMPORTANT. Each drilling step should take no more than 30 seconds. The total duration of continuous drilling with a low-power tool. no more than 10-12 minutes. The tool motor must be cooled down after each session, otherwise it will overheat and fail.

Drilling through concrete with a diamond drill bit can be viewed at

In the video the author explains how to drill through concrete without impact:

How to drill a concrete wall with an ordinary drill or a rotary tool: tips

How to drill a concrete wall with an ordinary drill?. this is the question many craftsmen asked when they had to hang shelves, cornices, etc.

Concrete is a durable material and therefore lends itself to drilling extremely bad. Even how to drill a wall in a panel house can seem like an impossible task.

Although, if you know certain secrets, this process can be greatly simplified.

Choosing the tool

So, the first question that the home handyman should ask himself is not how to drill a concrete wall with rebar, but with what. The main helper in this case will be a peorator, because it is designed for stone and concrete. At the same time, even a powerful drill can not cope with a wall wider than 12 cm. Although when it comes to foam concrete, the drill is preferable, because the peorator will simply break it.

The quality of the drill bit also determines whether or not it is possible to drill a hole in a concrete wall.

One of the best ways is to use drill bits that are specifically designed for impact drills. Their working part is a plate made of strong metal. With these drills, the question of how to drill a thin concrete wall can be considered solved.

There are also ring drills that have a diamond coating. They are very strong, they are involved in special drilling rigs, so they cost quite a lot. Therefore, to solve the problem of how to drill a hole in a concrete wall at home, it is impractical at least.

Using bits

Often you need to get a hole in the wall of large diameter for the socket. How to drill a bearing wall in this case? Then the teeth are used, which have metal tips on their circumference. Teeth can be found in a variety of sizes, but the most popular are 68-centimeter, which are designed just for sockets. Working with these parts, you need to turn off the impact mode.

There are such bits for drills, too. But they have a different kind of coating. a cadride-tungsten alloy. Use them conveniently, because drill a hole in the wall with a drill made of concrete and simultaneously make a hole in the tile she is quite able to. Such bits can only be used with powerful drills.

Drills. another device than to drill a concrete wall. Their diameters are varied. Experienced craftsmen advise to make a selection based on the diameter of the dowels.

Drilling Concrete with a Peorator

So, how to drill a hole in a concrete slab with a peorator? The procedure is not complicated:

• The drill is switched to percussion mode, and then drilling begins; the tool must be held strictly at right angles;
• After some time the drill bit is wet with water, this will help avoid overheating;
• After drilling a reinforced concrete wall has succeeded, the drill, without turning off the machine itself, must be removed;
• To clear the resulting hole of dust, the drill is run into it several times.

It is not possible to drill through the wall? The torch has hit something hard? So you have to try to make the hole somewhere else.

Doing without a drill

How to drill a concrete wall without a pen? The issue of using an ordinary drill when working with concrete remains unresolved. So whether or not you can drill through a concrete wall, everyone decides for himself. The tool can break, after all. Yes, and the procedure will take longer.

Drill a hole in the concrete with a drill, you can use a special tool. a punch. Operating with it is simple: put the sharp end to the place where the hole will be located, hit it several times with a hammer, and then you can start drilling.

At the same time it is important not to allow the tool to overheat.

As soon as the drill comes across an insurmountable obstacle, you must again engage the punch until the desired goal is achieved. Here’s how to properly drill through a concrete wall with a drill. Although it takes more time and a lot of effort, in the absence of a piercing tool, it can also be used.

Diamond drilling

This is another way to easily drill through a concrete wall. But it is used only by professionals who have special equipment (high-powered electric motor and the like).

How to drill a frame wall? This is not a problem, because diamond drilling allows you to get a hole of large diameters and depths, and without irritating to the eye dust. In parallel, water is fed directly to the drill bit, thanks to which it is cooled. As a result, the holes obtained have a neat appearance, and the appearance of cracks is completely excluded.

How to drill through tiles without cracking? See here. What is a drill bit?? Find out in this article.

Drilling concrete walls with this method is made, as a rule, professionals of specialized firms. So it does not make sense to stock up on a diamond drilling unit for independent work.

Read also:. for installing locks in metal doors. Oven repair at home. Repair of interior doors. Repair of plastic windows with their own hands. Shower cabin with their own hands from tiles in the photo and tips on making. Repair of locks on doors: how to do it yourself?

What do professionals advise?

Concrete structures are quite strong and difficult to drill. In addition, quite often the drills bump into the crushed stone included in the concrete mixture that is used to form the wall and ceiling slabs.

Holes in the concrete have to be made quite often, especially in the process:

• finishing work;
• furniture installation;
• Hanging the air conditioner;
• additional electrical wiring device;
• installing plumbing.

You can solve the problem of holes in a concrete wall in two ways:

Choosing a drill or peorator

When it is necessary to drill holes in the wall there is a question of what is better to buy. a drill or a peorator. When choosing, it should be borne in mind that the drill is a universal tool, and it is suitable for both drilling concrete walls, and for other operations.

Peorator, a tool specially adapted to work on concrete. Its cost is much higher than that of a drill. Therefore, when choosing one of these tools, you must consider the amount of work and the prospects for using the tool.

If it is necessary to make only a few holes, it is better to buy a percussion drill. If there will be many holes and such work is planned in the future, it is better to buy a peorator.

When choosing a drill, you should pay attention to the following characteristics:

• power (at least 500-600 W);
• maximum speed (at least 2500 rpm);
• the ability to regulate the speed;
• The possibility of reversible stroke;
• availability of the impact mode.

Impact mode for the drill is introduced to facilitate the drilling of concrete. In this mode, the concrete is split, which facilitates further drilling. In addition, it is desirable that the drill had a quick-change chuck in which it was possible to install drill bits with a diameter of up to 12 mm.

Peoratorov for home use have a power of about 750 watts and impact energy of about two and a half joules.

For example, compact peorators use an SDS-type chuck with a maximum drill diameter of 30 mm.

Diamond drilling

This is another way to easily drill a concrete wall. However, it is used only by professionals with special equipment (high-powered electric motor and the like).

How to drill a stud wall? it is not a problem, because diamond drilling allows you to get a hole of large diameter and depth, and without irritating eye dust. In parallel, water is fed directly to the drill bit, so that it is cooled. As a result, the holes obtained have a neat appearance, and the appearance of cracks is completely excluded.

How to drill a tile so that it does not crack? See here. What is a drill jig?? Read in this article.

Drilling concrete walls with this method is usually performed by professionals of specialized firms. In the vast majority of cases, when installing concealed wiring, there is no way to do without such a dirty and noisy procedure as drilling. So it does not make sense to stock up on a diamond drill rig for do-it-yourself work.

Screwdriver

The screwdriver is one of the popular tools in repair and construction work. With its help, you can tighten and unscrew screws, drill wood, metal, chipboard, plywood, tiles, plywood, lightweight concrete.

How to drill a concrete wall with an ordinary drill or screwdriver: tips

How to drill a concrete wall with an ordinary drill?. This is the question many craftsmen have asked when they have had to hang shelves, cornices and other.

Concrete is a tough material and therefore lends itself to drilling extremely poorly. Even how to drill a wall in a panel house, the task may seem unsolvable.

Although, if you know certain secrets, this process can be greatly simplified.

Choosing the tool

So, the first question the home handyman should ask himself is not how to drill a concrete wall with rebar, but with what. The main helper in this case will be a peorator, because it is designed for stone and concrete. At the same time, even a powerful drill can not cope with a wall width of more than 12 cm. Although if we are talking about foam concrete, the drill is preferable, because the peorator will simply break it.

It also depends on the quality of the drill bit whether you can drill a hole in a concrete wall or not.

One of the best options is to use drill bits designed specifically for impact drills. Their working part is a plate made of hard metal. With these drills, the question of how to drill a thin concrete wall can be considered solved.

There are also ring drills that have a diamond coating. They are very strong, they are used in special drills, so they cost quite a lot. So to solve the problem, how to drill a hole in a concrete wall at home, it is impractical as a minimum.

Using bits

Often you need to get a hole in the wall of large diameter for the outlet. How to drill a bearing wall in this case? Then it is necessary to use bits that have metal tips on their circumference. Core bits are available in different sizes, but the most popular are 68-centimeters, which are designed just for sockets. Working with these parts, you need to turn off the impact mode.

There are such bits for drills as well. But they have a different kind of coating, made of a cobalt-tungsten alloy. Use them conveniently, because drill a hole in the wall with a drill made of concrete and simultaneously make a hole in the tile she is quite able to. Such bits can only be used with powerful drills.

Drills are another tool for what to drill through a concrete wall. Their diameters are varied. Experienced craftsmen advise to make a selection, based on the diameter of dowels.

Drilling concrete with a peorator

So, how to drill a hole in a concrete slab with a peorator? The procedure is not complicated:

• The drill switches to percussion mode, after which drilling begins; the tool must be held strictly at right angles;
• After a while, wet the drill bit with water, this will help avoid overheating;
• after drilling the reinforced concrete wall has succeeded, the drill, without turning off the machine itself, must be taken out;
• to clean the resulting hole of dust, a drill bit is run into it several times.

I can’t drill through a wall? The drill bit hits something hard? So you have to try to make a hole somewhere else.

Do it with a drill

How to drill a concrete wall without a drill bit? The question of using a regular drill to work with concrete remains unsolved. So whether you can drill through a concrete wall, everyone decides for himself. The tool can break, after all. And the procedure takes longer.

Drill a hole in the concrete with a drill, you can use a special tool. a punch. To operate it is simple: put the sharp end to the place where the hole will be located, hit it several times with a hammer, and then you can start drilling.

In doing so, it is important not to allow the tools to overheat.

As soon as the drill comes across an insurmountable obstacle, you must again engage the puncher, until the desired goal is achieved. Here’s how to properly drill a concrete wall with a drill. Although it takes more time and effort, if you don’t have a torch, you can still use it.

Diamond drilling

Another easy way to drill through a concrete wall. However, it is used only by professionals with special equipment (high-power electric motor and the like).

How to drill a stud wall? This is not a problem, because diamond drilling allows you to get a hole of large diameter and depth, and without the annoying dust. In parallel, water is fed directly to the drill bit, so that it cools. As a result, the resulting holes have a neat appearance, and the appearance of cracks is completely excluded.

How to drill into tiles without cracking? See here. What is a drill jig?? Find out in this article.

Drilling concrete walls by this method is usually made by professionals of specialized firms. So it does not make sense to stock up on a diamond drilling unit for independent work.

Read also:. for installation of locks in metal doors. Oven repair at home. Repair of interior doors. Repair of plastic windows with their own hands. Shower cabin with their own hands from tiles in the photo and tips on making. Repair of locks on doors: how to do it yourself?

Step by step instructions

How to make a hole in a concrete wall or ceiling slab without a torch or other similar tools?

Despite the presence of a special drill, the work on the concrete wall is carried out taking into account the recommendations of experts.

The wrong approach can lead to tool breakage and partial destruction of the wall. Before beginning the work prepare the following set of tools and materials:

• a drill of sufficient power;
• Drill bit with pobedite (carbide) dressing;
• A puncher. a metal pin of the desired diameter;
• hammer or sledgehammer;
• vacuum cleaner.

The process of drilling concrete with an ordinary drill is not fast, so the home craftsman should have patience. Concrete dust is eaten into the floor coating, and to maintain cleanliness, it is recommended to cover the surface with newspapers. Vacuum up the spilled particles periodically. The sequence of operations is as follows:

• A suitable drill bit is placed on the tool. On the wall mark the point of drilling.
• Mark the drilling point by working at minimum rpm, with light pressure. Make a small hole in the surface, so the drill doesn’t slip during the intensive action.
• Deepen into the wall for 8-10 mm. Hold the tool at a right angle during drilling. There is a risk of damaging the surface, the tip or your hands if it is skewed.
• Remove the drill bit and pierce the concrete with a steel rod.
• Deepen into the wall for another 10-15 mm and again pierce the concrete with the hammer. After each work step, the drill bit is cleaned of concrete particles.

READ Difference between an electric screwdriver and a drill

Drilling with a diamond drill bit can be seen at

In this video, the author explains how to drill

Concrete holes without perforator percussion machine, which provides along with the impact, the rotation of the working tool and drill

Someone uses an electric screwdriver to drill holes in concrete. It takes longer than a peorator to drill, but its work can mean: Work is the performance of actions in time and space with the use of force does.

The plus is that there is less noise (you will save the ears and nerves of the neighbors). But you need a special drill bit for ceramics and glass. Work at low RPM and periodically moisten the drill bit in water. The drill will not last long, but it has time to make a few holes.

Use drill A cutting tool designed for drilling holes in various materials in concrete An artificial stone building material obtained by shaping and hardening a rationally selected, carefully mixed and compacted mixture of mineral (e.g., or metal without a peorator. set it against a concrete or brick wall unit of force in the MTS unit system, used in the USSR from 1933 to 1955. 1 wall equals the force which, acting on a mass of 1 tonne, gives it an acceleration of 1 m/s². 1 wall = 1 t-m/s² = and hit with a hammer A small percussive hand tool used for hammering nails, breaking objects, and other work. Spin the drill a bit and hit it again. The process isn’t fast, but it’s sure.

A grandfather’s way of achieving a goal

If there is no tool, there is a grandfatherly way of making a hole A polysemous term used in many fields of knowledge and referring to an internal through-hole or discontinuity of the surface, or a discontinuity of the surface in concrete. In Soviet times, they sold or made a tool themselves called a jumper.

is a tube of metal a group of chemical elements in the form of simple substances under normal conditions, possessing characteristic metallic properties, such as high thermal and electrical conductivity, positive with varying diameters. On the tube on the working side, there are prongs.

Working with a flat boring hammer is easy. Hammer in one hand, flat boring hammer in the other. Tool is struck with a technological tool that affects and changes objects of labor, an object, a tool to produce some kind of work The design and rules of tool use are based on. and then it is turned. This is done until the desired depth of the hole is obtained. Periodically released a hole champler is a hand tool used to punch holes in concrete or stone from the splinters and dust of concrete.

In five or seven strokes, you can make the hole you want.

My grandfather made such a tool himself with a handle for easy turning in concrete. Although the tool is ancient, but I use it when there is no electricity or peorator at hand The upper limb of humans and some other animals, an organ of the musculoskeletal system, one of the most important parts of the body. Look at some more of my grandfather’s “wacky” Soviet tools I found recently in the garage.

How to drill without dust: options, what is better

Construction work is always accompanied by dust and debris, but using some recommendations and tips, it can be significantly reduced:

• Leaves light dust behind when working, so dust is not allowed to spread around the room at the same time, use a construction vacuum cleaner. Some brands of tools have a built-in vacuum cleaner, which makes the task easier;
• using a drill, it is best to make either a conductor on the end or a pile, or make an envelope under the hole so that debris falls into it.

During the performance of these works, it is necessary to adhere to the developed technologies and safety rules, then you can not only make a hole yourself without attracting expensive specialists, but also avoid injuries.

With what to drill a bearing wall in a panel house

In most panel houses the walls are made of concrete, to make a hole with a peorator, you need to use pobeditovye drills.

READ How to Make Chamfers on a Knife with an Angle Grinder Video

Other than those, you can use special drill bits. They have tips on the circumference. When using them, you need to disable the percussion function of the perforator.

Specialists use diamond drilling, which requires powerful equipment and skills.

Drilling holes in the wall correctly: general rules and recommendations what to drill

In order to correctly drill a wall, it is necessary to take into account the material of which it is made, based on this it is necessary to select the tool.

• Hold the tool correctly when working. For example, the drill in the hands should be straight, and enter the surface in the vertical direction;
• Use an extra handle for convenience;
• Depending on the material of the surface, choose the right drills.

• concrete, stone, brick wall. use a carbide drill bit, more often pobeditovye;
• metal. a drill bit for metal;
• tile, ceramic tile. special drill bits for these materials, sometimes can be replaced by a concrete drill bit with a pobedite build-up;
• Wood chipboard, wood. for holes less than 10-12 mm a drill for metal is suitable, for larger holes special drills for wood are used.

Using drill bits

It is often necessary to get a large diameter hole in the wall for the socket. How to drill a bearing wall in this case? Then use tooth bits, which have metal tips on their circumference. Teeth can be found in many different sizes, but the most popular are 68-cm, which are designed just for the sockets. When working with these parts, it is necessary to switch off the impact mode.

Handmade Drill Holder

Circular saw from a drill The whole machine (without the electric drill) consists of the base, on the working table, four racks at them not two holders: the drive (electric drill) not the free end of the shaft of the saw blade. For the base used furniture (veneered) chipboard size 300×250 mm not thick. For the table (working plate) selected a rigid duralumin plate thickness of four mm not []

Drilling through concrete with a torch

So, how to drill a hole in a concrete slab with a peorator? The procedure is not complicated:

• the drill is switched to percussion mode, and then drilling begins; the tool must be held strictly at a right angle;
• after some time the drill bit is moistened with water, this will help to avoid overheating;
• after drilling a reinforced concrete wall, the drill bit must be removed without turning off the machine itself;
• In order to clean the resulting hole from dust, a drill bit is run into it several times.

I can’t get a hole in the wall? The drill bit hit something hard? So, you need to try to make a hole in another place.