July 19, 2019

How To Make A Simple Dog House With Your Own Hands

How to make a dog house with your own hands – 15 best ideas

Dogs guarding the master’s house outside should have a warm booth in the yard, and dogs living in the house have the right to a cozy house with a soft stove bench. Loving owners just have to provide their pets with these amenities. How to make a dog house with your own hands – see the best options that I have collected for you!

Simple dog box from scrap materials

they will help you to determine the size of the booth, even an exact calculation of the size of the kennel, based on the "measures" of your dog. Then the construction is described, starting from the sketch and ending with the final result.

You can watch the video of the construction of a box for a puppy German shepherd "for growth". The booth is built from lumber remains – bars and slats, the roof is made from a flat painted sheet of iron. Puppy in a new house cozy!

The page describes in detail not only the construction, but also the insulation and sealing of the structure, which is important in the cold season. Important and useful material!

Warm winter booth for a dog living in the yard

And again the booth for the dog living in the yard. The authors of the article propose drawings and photos of the phased construction of a beautiful and warm booth. Construction is conducted from a bar and boards.

As a heater, you can use old cotton clothes, cotton wool, building insulation. The booth is insulated outside with a stapler, and then sheathed with sheets of hardboard or chipboard. The roof is made gable, well protects the house and the dog from the weather. A great option for a yard dog!

Good euro dog box

Phased construction of the "Euro-booth" for the dog you will see here

The young master built a skeleton of timber, sheathed his block house, made a gable roof with a roof of metal profiles. After installation of the corner covering the joints of the walls from the block house, the booth is ready! Inside the pallet is placed, and you can just lay a mat. A beautiful wooden booth with rather hermetic walls turned out. Well done, master! His dog Jerry is pleased!

Warm dog house for harsh winters

On this site, besides other important information on the construction of the booth, a very interesting video (at the end of the article) attracts the attention. The video is dedicated to the construction of a kennel for a sheepdog puppy. The booth is large, with double walls of lining (there is insulation between them – polystyrene foam), with a heated floor and a warm opening roof covered with bitumen tiles.

The master, obviously an animal lover, tells in detail about the choice of material for construction, conducts a comparative analysis of the cost of various materials. Be sure to watch this video to the end. Useful and interesting information for residents of the northern regions. In such a booth a dog will be warm even in severe frosts!

And now the home options for houses, for hand pets.

Foam booth made of fabric for a small dog

For a small dog it is not necessary to build a house, you can sew it! In the article

The author will help you to sew a soft house for your dog made of cloth and foam rubber. There are even ready-made patterns! Calculation of the size of the patterns you can specify with the size of your four-legged friend.

The house has an oval shape. The outer and inner walls of the house are made of fabric (as recommended by the author – any) and are trimmed with fur, a frame is made of foam rubber between them, the floor is covered with fur. Warm and soft house like your little dog!

Bed for a small dog

You will see a master class for beginners dedicated to sewing a dog house with a frame. Original design! The frame, which is wearing a regular T-shirt, is attached to the bench!

The neck of the T-shirt serves as an entrance for your pet. The bottom of the T-shirt is knotted (closed), and the sleeves just hang down (this is “emergency exits”). This house will appeal to both a dog and a cat!

Sewn house for indoor dogs

Here is another detailed workshop on sewing a house for indoor dogs. Very beautiful, bright house! Pleases with the appearance not only a dog, but also owners! The house is made of two types of thick fabric with foam rubber, and the roof is made of faux fur. The entrance is trimmed with fur. Your pet has such a soft, cozy home! Download the pattern at the link at the end of the article.

More ideas

And this booth is just a work of art! The owners love their pet very much and are ready to put it into real mansions! See, what a beauty! Flowers are planted in the pipe and under the window, the food bowl is decorated in a wooden stand. Even a small ladder is made before entering the house.

Dog box with his own hands

Option box for dogs with a small front garden. The idea is nice and original, plus the booth itself is made with cladding, decorated with flowers.

How To Make A Simple Dog House With Your Own Hands

Dog house with a canopy

Another beautiful idea is a dog house. In the photo we see a kennel with a canopy, with a protective wall from the cold north wind and with a window to the south side. Under a canopy, a dog may lie in the warm season, as well as in the rain.

Idea dog kennels

And this idea of ​​a dog house is just fabulous! In such a kennel, as it seems to me, the dog must live extraordinary. However, for the owner of a loving his four-legged friend, he is in any unusual way

Ideas booths for dogs with their own hands

The following ideas are more original and refined, but creativity cannot be stopped! And if you decide to give your pet the most beautiful and cozy house, then create, inspiration to you and creativity!

How To Make A Simple Dog House With Your Own Hands

Photo ideas dog booths

At the end of the compilation there are two more photos of the idea of ​​a dog house made by caring owners. On the left photo is a two-story booth for two dogs living on the same plot. However, if the dog is alone, then it can use the second floor at its discretion. On the right of the photo is a booth with an attic, the roof of the booth is covered with shingles.

Share link:

How to build a dog house with your own hands

Having decided to start a dog in a private house, you should think about where it will live. Naturally, if this is a watchdog, and not a small Pekingese room, then the place of his “registration” will be the yard. However, despite this, you can not leave your faithful friend without a roof over your head and force him to sleep under the porch. It is for those who are not indifferent to the fate of their pet, we will light this article. It will talk about how to make a dog house with your own hands from simple and affordable materials.

The most worthy material for building dog housing is wood. The most convenient way to use ordinary edging boards. DSPs (cement-bonded particle boards), a safe and very convenient material to use, can also be a good alternative. But chipboard as an option should not be considered. Not only do the plates of pressed chips deteriorate when exposed to moisture, so they also emit toxic substances. Fiberboard and plywood in this regard are less dangerous, but they are also not waterproof, so kennels are not suitable for construction.

The roof of the booth is covered with any roofing material. Most often used slate, roofing material or roofing sheets of iron.

In the classic version, the doghouse is a small rectangular structure, most often with a gable roof. A doghouse with its own hands can be made with a lean-to roof, however, in any case, the slopes of the slopes should not be too gentle. This will allow your pet to lie free and bask in the sun right on the roof of your home.

[include id = "5 ″ title =" YAN – in text "]

The inner area of ​​the booth should allow the dog to freely get inside, lie down, turning on its side and stretch out to its full length. Therefore, in order to build a booth, you first need to measure the size of its future occupant.

How To Make A Simple Dog House With Your Own Hands

Determine the size of the booth

The height of the kennel should be 10 cm greater than the height of your pet at the withers. The width of the entrance is slightly larger than the width of the dog’s chest. The length of the booth is equal to the length of the dog lying on its side with legs extended. For example, a box for a shepherd dog with its own hands can be built with the following dimensions: 1 x 1.35 x 0.95 m (length / width / height). Such sizes will be optimal for most large dogs, for smaller animals and the dimensions of the booth, respectively, will decrease.

The construction will require wooden bars with a section of 50×50 mm (40×40 mm), edged boards with a thickness of 20-25 mm and nails.

We begin work with knocking down wooden frame-trim from bars. It should be noted that the floor of the structure should be raised about 10 cm above the ground level. Such a decision will not allow the wood of the kennel to get wet and rot, and also to get inside the rain and melt water. In order to raise the floor using low legs, for example, from bricks.

How To Make A Simple Dog House With Your Own Hands

Making a frame trim for a dog kennel

After installing the frame, the floor will be laid from tight-fitting boards. There should be no gaps between them, otherwise the dog’s claw can get stuck in them, and this is fraught with injuries.

Read more:  Doghouse With His Own Hands

We lay wooden floor and build the frame

Next, a wooden frame is constructed of bars.

Wooden frame booth

After that, the booth is sheathed with boards. To make it convenient to maintain cleanliness in the canine home, it is advisable to make one of the walls removable. To do this, the wooden folds of the corner profile are fastened to the frame posts from above and below. Between them, the wall can move easily. You can also make a booth with your hands with a removable roof, which hinges on hinges or simply removed.

The roof of the kennel will be more reliable if you make it a two-layer. First, the first layer of boards is spaced onto a frame or a removable frame at intervals of 50 mm. Then these slots overlap the second layer. After that, the roof can be covered with linseed oil and paint with oil paint.

[include id = "6 ″ title =" YAN – in text "]

In the event that a roofing layer, slate or other roofing material is laid on the roof, the boards are laid tightly together in one layer.

At the end of the work, the dog box will be painted with paint of any tone with its own hands, as long as the smell from it quickly disappears. It should be noted that only the exterior of the building should be painted. In principle, you can do without painting at all, but in this case, the kennel will quickly take on an ugly earthy tint.

How To Make A Simple Dog House With Your Own Hands

Doghouse after finishing

If the winters in your area are cold, then you can make a dog house with your own hands with insulated walls. The foam material, mineral wool, sawdust, husks from seeds, etc. can act as a warming material.

At the same time, the frame of the building is sheathed both outside and inside. Between the plating there is a void where the insulation is laid. Any harmless material, even plywood, can be used as the inner lining, and as the outer surface – boards, plastic or wooden lining. In no case do not use metal for the booth walls. The roof of the building is also insulated in the same way.

Warming of the box with mineral wool

To warm the floor at the bottom of the booth, you can put a thick and warm bedding, for example, a straw mattress or an armful of hay.

Now the question of how to build a dog house, will not cause you difficulties. It’s time to get down to business! In addition, based on the simple construction of the kennel, which was described above, and by adding to it a few decorative elements, you can make a chic dog apartment. Well, for example, these are:

How To Make A Simple Dog House With Your Own Hands

How To Make A Simple Dog House With Your Own Hands

Exclusive doghouse

How To Make A Simple Dog House With Your Own Hands

Booth with observation deck

How to make a dog house with your own hands

The main stages of building your pet’s booth are choosing the optimal size, selecting materials and assembling.

All the work can be completed in one day, which will help our detailed instructions with an indication of all the important points. It can be difficult unless the measurement of the dog, especially if it is overly active.

How To Make A Simple Dog House With Your Own Hands

The choice of design

The design of the booth can be single-volume or with a vestibule. The second option is preferable – the platform prevents the blowing of cold wind and drafts into the sleeping area. Zones are separated by a partition with a passage or curtain.

How To Make A Simple Dog House With Your Own Hands

Ceiling need removable. This will allow, if necessary, to open a kennel for cleaning or to provide veterinary assistance to the animal. The roof can be single or dual. From a practical point of view, there is no difference. Shed roof easier to do, and the advantage of the gable option in an additional place for storing dog toys.

How To Make A Simple Dog House With Your Own Hands

Sizing booths

The dimensions of the booth must correspond to the size of the dog and the climatic conditions. The dog should be easy to turn inside, lie free and roll from side to side. But at the same time the booth should not be very spacious, if it is used in winter. With severe frosts, a large space is more difficult to warm up, the animal will freeze.

Calculation of the sizes of the kennel is carried out according to the following measurements:

  1. Width (berth) – the length of the dog from nose to tail. If the kennel is divided into a tambour and a berth, the size increases in accordance with the build of an animal by 400–600 mm.
  2. The height of the box is the height of the dog in a sitting position plus the thickness of the litter plus a margin of about 10 cm. The dog must sit without touching the ceiling, but walk inside with its head bowed.
  3. The depth of the box is the length of a dog lying on its side with legs extended forward from the tips of the legs to withers, plus a margin of 10 cm.
  4. Manhole height – height at withers minus 5–8 cm.
  5. Manhole width – chest width plus 5–8 cm.

How To Make A Simple Dog House With Your Own Hands

If you still have a puppy, then in building the booth should be guided by breed. By the size of the dogs are divided into three groups, respectively, and recommendations on the dimensions of the booth for them are different:

  1. Small breeds (poodle, dachshund, pug, cocker spaniel, etc.). The height of the booth is taken 600 mm, width and length – 700 and 550 mm.
  2. Medium breeds (Doberman, Bobtail, Bull Terrier, etc.). Their height at withers reaches 40–57 cm, therefore the height of the kennel is made up to 800 mm. Dimensions – 1200х750 mm.
  3. Large breeds (shepherd, Mastiff, Dalmatian, etc.). They have a height of more than 75 cm at the withers, so the booth should be spacious enough. Height 950 mm, width and length – 1400 and 1000 mm.

Selection and preparation of materials

The ideal solution for construction – coniferous wood.

  1. For the framework, pine bars of 100×50 and 50×40 mm will be required.
  2. The internal covering is carried out from wooden lining or moisture resistant plywood.
  3. The interface between the wall and floor paneling is covered with a board or plinth around the perimeter.
  4. The outer skin shall withstand precipitation and prevent blowing. Suitable lining, block house, plastic lining, fiberboard, covered with waterproof paint.
  5. The floor is solid, without holes and slots. A grooved floorboard will do.
  6. For the ceiling, 40×40 mm bars and a sheet of plywood will be required. If the ceiling is warmed, then two sheets of plywood are taken between which mineral wool or foam plastic and asphalt are laid.
  7. The roof frame is made of 40×40 mm bars. It is sheathed with glassbag, and the lining is fastened on top. For weather protection, the roof is covered with roofing felt, shingles or other moisture-proof material.
  8. Insulation: mineral wool, foam or sawdust mixed with clay.

How To Make A Simple Dog House With Your Own Hands

The work will require:

  • antiseptic impregnation;
  • galvanized nails;
  • saw;
  • hammer;
  • screwdriver;
  • self-tapping screws;
  • stapler and staples;
  • pencil and tape measure;
  • level and building area.

Base and frame

Cut two beams 100×50 along the length of the booth, between them along the edges two more beams are laid into the depth of the booth. The dovetail connection would be ideal, however, half-tree docking is sufficient, when a notch is made from the top of the side bars and the lower groove is made on the longitudinal. Fix the connection with galvanized nails or red-hot screws.

How To Make A Simple Dog House With Your Own Hands

In the place where the partition will be installed, the timber 50×40, inserted into the grooves on the base, is fastened. Additionally, the jumper should be installed in the middle of the sleeping chamber.

Bottom frame is hemmed with ruberoid and glassine. To fix the binder you need two longitudinal bars in the overlay to the transverse bars of the base. They will provide airing the bottom of the booth and the gap between the booth and the ground.

How To Make A Simple Dog House With Your Own Hands

Lay tight insulation and top cover with another layer of glassine. Next, lay the floorboard with a lock, fastening it to the base with screws.

How To Make A Simple Dog House With Your Own Hands

In the corners and on both sides of the manhole, vertical posts are made of 50 mm timber along the height of the booth minus 50 mm. Under the partition, it is better to install the bar 100×50 with the wide side over the lintel so that it goes inside the booth. Fix the timber on the upper border of the manhole between the posts.

Prepare a frame made of 50×40 timber for the upper part of the walls together with a lintel under the partition. Connection in a half tree. Install and fasten it to vertical racks.

How To Make A Simple Dog House With Your Own Hands

Fix the vertical stand in the partition, retreating from the edge to the width of the main manhole, forming a passage.

Walls

Sheets of plywood or thick moisture-proof OSB sheathed frame, from the inside forming the inner surface of the booth. Cut the opening under the manhole. Fill the partition, leaving a passage from the main chamber of the booth.

How To Make A Simple Dog House With Your Own Hands

Place aspen from the outside into the resulting niches and secure it with a stapler. Place a tight insulation and close it with another layer of glassine. From the outside, close the booth with clapboard, waterproof plywood or OSB.

How To Make A Simple Dog House With Your Own Hands

Roof

For the roof, a frame of 40×40 mm timber and gables are prepared separately. For a shed roof gables are a right triangle. Racks on one side to the height of the roof of the timber and logs across the entire width of the frame.

How To Make A Simple Dog House With Your Own Hands

For two slopes, a central post is installed along the long side of the frame and logs on the sides.

How To Make A Simple Dog House With Your Own Hands

Cover the resulting planes with sheets of plywood, or better with lamellas, with a gap of 3–4 cm. On top of it, lay the roofing material with an approach to the edges of at least 5 cm and any available roofing material.

Read more:  How To Make A Doghouse Do It Yourself

Bottom roof hemlock and warm. The layer of insulation is closed with glass purse and lined with plywood or clapboard. In plywood, pre-drill the air holes in staggered order or in rows with a distance of about 10–15 cm.

How To Make A Simple Dog House With Your Own Hands

The roof is mounted on sheds to the main frame of the booth.

Installation booth

For the booth, find a flat place on the rise so that the view from it falls on most of the yard or farm. If there is no natural rise, then form a mound of large crushed stone, and after a shallow, fraction. Smooth pebbles would be preferable. Most of the time, the booth should be in the shade, however, additional space around it should not be shaded.

Doghouse do it yourself: step-by-step instructions

Dog box A photo

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

How To Make A Simple Dog House With Your Own Hands

Dog house

Dog kennels are usually built in country houses so that pets can fully hide in them from rain, cold or heat. In order for the booth to be initially convenient for the dog, you must clearly follow all the tips that will be given in the information below.

The main thing that is important to consider when building a booth – the size of the dog for which it is intended. If it is still just a puppy, then it is necessary to make it, taking to calculate the average figures. Also it is necessary to take into account the region of residence, because if the dog spends winter in it, then it should be warmed first. The price of construction from this, of course, will increase, but the pet’s health is immeasurably more expensive.

Fundamental rules

How To Make A Simple Dog House With Your Own Hands

How to make a dog house.

There are several special rules that are important to follow when building a booth with your own hands. They will not only make the home more comfortable, but also the process of its construction more understandable and consistent.

  • The dimensions of the frame must be met with the condition that inside the dog will rotate freely and occupy the most comfortable position.
  • The height of the entrance to the booth should be slightly less than the height of the dog at the withers.
  • The width of the manhole is not just set to the width of the chest of the most adult dog of the selected breed, but you must add an additional 10 centimeters to it.
  • The depth of the booth should be more space than just in depth and width.
  • The height of the inner part of the kennel by several centimeters should be greater than the height of the dog. The width should also be increased.
  • Laz should be installed not in the center, but on the side. It is better if it is located on the widest part of the wall.
  • The roof should have a small ramp for snow and rain.
  • The surface of the material, which is taken for the construction of the kennel, should not have knots so that the dog does not hurt.

Selection of a place for a kennel

How To Make A Simple Dog House With Your Own Hands

Where to build a kennel.

By the preliminary stage of building a good dog house with your own hands should be attributed and selection of a certain place once and for all where the kennel will stand. Do not think that this process is not particularly important, since it is necessary to strictly observe the following rules:

  • It is necessary to take into account the most frequent direction of the wind that blows in a particular area. It is better not to leave the booth at the blown place, but to take it away to a calmer and, of course, a warm corner.
  • The site must have a shaded area and a sunny one. It is better to install a kennel in a shaded one, since the heating of a kennel in the heat and sun can lead to a heat stroke in the dog.
  • If possible, it is better to choose a slightly elevated place so that water does not accumulate around the kennel and is not wet in it. If there is no possibility to move to another place, then you need to try to level the surface and make a booth with a special frame that will be higher than the possible water level and will not allow it to leak inside.
  • The best location for dog kennels is on the south side of the house.
  • The location should be such that the animal is provided with a good view of the entrance to the courtyard and the house.
  • Before the booth you need to leave space free for the movement of the dog.

A dog will not just be inconvenient to be in a kennel, which is delivered without regard to convenience and space for him. In this case it may also happen that he flatly refuses to go inside and live there, preferring to be outside.

  • In the apartment the dog also prefers to have its roof over his head. Read how to make a house for the dog with your own hands.
  • Noticed that the dog eats grass near his booth? Find out why she does it.

Booth design and materials for it

How To Make A Simple Dog House With Your Own Hands

Design dog dwelling.

Types of booths for dogs are completely different. The most popular option is the usual rectangular doghouse, which is easy to make with your own hands. In this case, the hole can be curtained with a cloth.

A booth with a tambour is considered to be more comfortable and convenient. It is recommended to build for pets to those people who live in areas with strong or cold winds.

This type of kennel has two specific rooms, the first of which is not insulated and serves only as additional protection against negative natural factors. The main part of the booth is inside it, well insulated and fenced off by a wall with a manhole for a dog. If there is a desire to further protect the pet from the cold, then the vestibule is also better to warm. At the same time, for example, you can hang on the entrance, for example, a piece of great chinnel fabric, due to which cold air will not enter the booth at all.

Pine planks are considered to be the most suitable material for building a dog’s home.. They are more durable, and thanks to the coniferous pairs contained in them, they are additionally able to protect the animal from many annoying insects. Other materials popular in construction (foam concrete, brick, etc.) will not be suitable as the main material for such purposes. For flooring perfectly matched flooring boards.

As the outer plating can be used plastic lining or wooden lining. The latter can also be trimmed inside, additionally impregnated with water-repellent agents that can protect the material. For cladding, you can also use a block house, stone, and even siding. Thus, the booth can be built with its hands completely in accordance with the design of the whole house and the buildings around it.

Warming

How To Make A Simple Dog House With Your Own Hands

Since simple boards are unlikely to protect the animal well in strong winds or frost, you should take care of insulation. Foam foam is excellent for this purpose.. Its layer should be placed between the main material of the booth. However, if for the manufacture of the booth will be taken the wood bars, then additional measures for insulation will not be needed. It will be important only to take care in this case of careful caulking cracks if they arise. Mineral wool has good thermal insulation properties.

Approximate sizing

If initially it is not possible to accurately select the size of the dog’s booth under its parameters, then you can make them average, observing the proportions of the dog in the most adult period. So, for small breeds, a doghouse will be comfortable with a height of 600 mm, 700 mm long and 550 mm wide. A booth for a German shepherd or rottweiler should be less than 750x1200x800 mm. But for larger animals, for example, for the Caucasian Shepherd Dog, the best option is 1100x1400x1000 mm.

These dimensions are approximate and you need to take into account the individual characteristics of the dog. So, an overly spacious doghouse for a dog will not keep warm well, and being too tight will not allow his movements to be open.

Build booth

A kennel for a dog is made by hand rather simply. To do this, you need to have at least an approximate drawing, a set of necessary tools and materials, and follow the following instructions exactly:

    How To Make A Simple Dog House With Your Own Hands

Work begins with the manufacture of the floor. If you plan to insulate the booth, then at this stage it is necessary to lay the insulating material, because later it will not work. Carnation hats must firmly enter the tree in order to avoid the possibility of injuring the animal. Pre-knocked together the frame for the bottom, after which floor boards are nailed to it. Additionally, reinforcement by the floor bars is required in case the dog is very heavy. This is important because it will avoid sagging of the boards and their possible breakage.

  • To the finished bottom in the corners it is necessary to attach bars, which in size should correspond to the measurements made earlier and calculations for the height of the dog. This is the basis for future walls. Perpendicular to the bottom it is better to install additional bars that will allow you to fully hold the roof slope. In the same way it is necessary to designate an entrance.
  • The inner part of the wall is sheathed with clapboard. This material is more suitable because it is not capable of delaminating with time, unlike plywood. The sheathing is secured with small galvanized nails.
  • The design must be inverted and treated with any impregnation with antiseptic effect. After you need to close each part of the ruberoid, attaching it to the booth bars. The walls should be laid with glassbag, put a layer of insulation, again cover it with glassbag, and only after additionally hammer with plywood or other selected material.
  • Next is the laying of the finished floor (with the condition already laid insulation).
  • We equip the frame for manhole and a small threshold.
  • How To Make A Simple Dog House With Your Own Hands
  • Installation of the roof depends on where the booth will be located. If you intend to install it in a shed or a dog enclosure, it is possible to get along with a simple ceiling, which is constructed according to an approximate floor formation scheme, with the exception of the installation of the frame and bars. In the absence of additional protection, it is necessary to build a roof that will protect the dog from moisture and snow penetration into its home. To cover more suitable shingles or roofing felt, which must be attached to the structure on pre-made gables.

    Read more:  How To Insulate A Dog House
  • Before laying the roof is to take care of its warming. This can be done, for example, with the help of mineral wool, previously paving it with glassine. On top of it should be further secured with a sheet of plywood. Such a ceiling is better to tinker with the possibility of removal. In the future, it will help to clean the booth or provide veterinary assistance to the dog;
  • It is recommended to close the manhole with a canvas cloth, on the bottom edge of which you need to place small bags of sand. This will protect the animal from the wind.
  • The next step is the outer skin of the kennel using the selected material.
  • The final phase of the construction of the booth will be its arrangement for the convenience of the dog. Inside it is recommended to lay straw, sawdust or hay on the floor. Sawdust, for example, can serve as an excellent material, since its absorbing properties are very high. In addition, they are very soft and the dog will be comfortable inside. The litter needs to be changed frequently, especially in the warm season..

    How to teach a dog to the booth

    How To Make A Simple Dog House With Your Own Hands

    Schooling to the booth.

    It happens that despite the very warm and comfortable kennel, the dog still prefers to be outside. It is possible that he previously lived in an apartment with the owners, so this type of housing is still somewhat unusual for a dog. In this case, in the booth you need to put some of her toys, you can put a treat. By the way It is recommended to feed the dog with the most delicious food near the kennel, to gradually accustom her to the fact that she will get tidbits right next to the booth.

    Also, some say that the dog should be tied for a short time near the booth. As soon as it starts to rain and she does not find a better shelter than the one she already has, the animal will immediately take its place.

    If the dog lies elsewhere, then it is possible that it is from him that the dog has the best view. Then you can say that the place for the booth was chosen not too correctly and as soon as it changes, the animal will settle in it.

    It is very important not to give the dog a reason to feel punished when you send it to the booth with a team. In such a case, the dog will consider himself punished for misconduct and perceive the kennel will be appropriate. He will not live in it. It is better to encourage the animal when it enters the booth, and for those dogs that previously lived in the house, it is better to settle the rest of the day with them for the first time, and leave the other one in the kennel. So the dog will be able to get used faster and not to yearn.

    Care of the booth

    It is not enough to build independently a kennel for a dog, it is also important to ensure comfortable conditions in it. therefore it is important to carry out sanitary treatment of the booth monthly in the summer, and the rest of the time – once a season. All parasites can be derived by formalin, lysol, creolin 3%. During processing and until the solutions dry, the animal cannot be in the booth.

    Video. Doghouse do it yourself

    How to make a doghouse kennel for a dog – 7 best ideas.

    How To Make A Simple Dog House With Your Own Hands

    Dogs guarding the master’s house outside should have a warm booth in the yard, and dogs living in the house have the right to a cozy house with a soft stove bench. Loving owners just have to provide their pets with these amenities. How to make a house for the dog – see the best articles on the Internet!

    Simple doghouse from scrap materials

    How To Make A Simple Dog House With Your Own Hands

    On the page

    http://101dizain.ru/budka-dlya-sobaki/

    they will help you to determine the size of the booth, even an exact calculation of the size of the kennel, based on the "measures" of your dog. Then the construction is described, starting from the sketch and ending with the final result.

    You can watch the video of the construction of a box for a puppy German shepherd "for growth". The booth is built from lumber remains – bars and slats, the roof is made from a flat painted sheet of iron. Puppy in a new house cozy!

    The page describes in detail not only the construction, but also the insulation and sealing of the structure, which is important in the cold season. Important and useful material!

    Warm winter booth for a dog living in the yard

    How To Make A Simple Dog House With Your Own Hands

    http://stroyrom.ru/obustroy-uchastok-sam/10-obustroy-uchasto

    And again the booth for the dog living in the yard. The authors of the article propose drawings and photos of the phased construction of a beautiful and warm booth. Construction is conducted from a bar and boards.

    As a heater, you can use old cotton clothes, cotton wool, building insulation. The booth is insulated outside with a stapler, and then sheathed with sheets of hardboard or chipboard. The roof is made gable, well protects the house and the dog from the weather. A great option for a yard dog!

    Good Euro-booth

    How To Make A Simple Dog House With Your Own Hands

    Phased construction of the "Euro-booth" for the dog you will see here

    http://fishki.net/52392-budka-dlja-sobaki-svoimi-rukami-13-f…

    The young master built a skeleton of timber, sheathed his block house, made a gable roof with a roof of metal profiles. After installation of the corner covering the joints of the walls from the block house, the booth is ready! Inside the pallet is placed, and you can just lay a mat. A beautiful wooden booth with rather hermetic walls turned out. Well done, master! His dog Jerry is pleased!

    Warm dog house for harsh winters

    How To Make A Simple Dog House With Your Own Hands

    http://samdizajner.ru/budka-dlya-sobaki-svoimi-rukami-poshag…

    On this site, besides other important information on the construction of the booth, a very interesting video (at the end of the article) attracts the attention. The video is dedicated to the construction of a kennel for a sheepdog puppy. The booth is large, with double walls of lining (there is insulation between them – polystyrene foam), with a heated floor and a warm opening roof covered with bitumen tiles.

    The master, obviously an animal lover, tells in detail about the choice of material for construction, conducts a comparative analysis of the cost of various materials. Be sure to watch this video to the end. Useful and interesting information for residents of the northern regions. In such a booth a dog will be warm even in severe frosts!

    And now the home options for houses, for hand pets.

    Foam booth made of fabric for a small dog

    How To Make A Simple Dog House With Your Own Hands

    For a small dog it is not necessary to build a house, you can sew it! In the article

    http://zoomirr.ru/master-klass/domik-dlya-sobaki-svoimi-ruka…

    The author will help you to sew a soft house for your dog made of cloth and foam rubber. There are even ready-made patterns! Calculation of the size of the patterns you can specify with the size of your four-legged friend.

    The house has an oval shape. The outer and inner walls of the house are made of fabric (as recommended by the author – any) and are trimmed with fur, a frame is made of foam rubber between them, the floor is covered with fur. Warm and soft house like your little dog!

    Bed for a small dog

    How To Make A Simple Dog House With Your Own Hands

    On the page

    http://promyhouse.ru/idei-dlya-doma/tekstil/domik-dlya-sobak…

    You will see a master class for beginners dedicated to sewing a dog house with a frame. Original design! The frame, which is wearing a regular T-shirt, is attached to the bench!

    The neck of the T-shirt serves as an entrance for your pet. The bottom of the T-shirt is knotted (closed), and the sleeves just hang down (this is “emergency exits”). This house will appeal to both a dog and a cat!

    Sewn house for indoor dogs

    How To Make A Simple Dog House With Your Own Hands

    http://vykrojka.ru/vykrojki-dlya-sobak/405-domik-dlya-sobaki…

    Here is another detailed workshop on sewing a house for indoor dogs. Very beautiful, bright house! Pleases with the appearance not only a dog, but also owners! The house is made of two types of thick fabric with foam rubber, and the roof is made of faux fur. The entrance is trimmed with fur. Your pet has such a soft, cozy home! Download the pattern at the link at the end of the article.

    More ideas

    How To Make A Simple Dog House With Your Own Hands

    And this booth is just a work of art! The owners love their pet very much and are ready to put it into real mansions! See, what a beauty! Flowers are planted in the pipe and under the window, the food bowl is decorated in a wooden stand. Even a small ladder is made before entering the house.

    Like our site? Join or subscribe
    (notifications about new topics will be sent to the mail) on our channel in MirTesen!

    SHARE:
    Dog House 0 Replies to “How To Make A Simple Dog House With Your Own Hands”
    anna_stevens