How to make an electric steamer from a screwdriver. Additional recommendations

Scooter from plastic pipes with an electric boat from a screwdriver

Over the past few decades, the achievements of technological progress gave the average user a huge number of most incredible developments. Without a doubt, all these devices thoroughly influenced the quality of life of citizens and one of these “toys”, became a scooter equipped with electric traction.

It is convenient to wear/carry a machine with you, and in the city, you can cover a distance of 15-30 kilometers and even more-it all depends on the electric scapol model. They ride high.Tech development in the summer in the park, get to the place of work, you can be extremely mobile and just get a high from skiing. They charged the unit in 3-4 hours and forward, towards new adventures!

Do.It.Yourself electric shock from a screwdriver

»Screwdriver» Electro.Sucks with your own hands from a screwdriver

There are many interesting videos on the Internet, and once again watching the videos on YouTube, I came across a RAZOR electric garden overview. I wondered how much this type of transport is popular. Having wandered over the Internet, it turned out that this is a very common thing. Later resting on the Sea of ​​Azov in the city of Yeysk, I personally saw an industrial Chinese electric shock with wide wheels with brake discs. Apparently those who have large batteries and charge enough for 40 km. I was struck by a powerful frame. A kind of small moped))))). The price of scooters captivates. From 12,000 per scooter with an electric motor 350W. But I did not stop there and found several articles of home.Made electric scooters. I really liked the idea of ​​a home.Made electric scooter from a screwdriver and I decided to create my own spawn from plywood. And the screwdriver applied some kind of Austrian. It was a battery drill with a shock and 24V battery. I got it for nothing. It was of course scary at first, I was visited by doubts whether the engines capacities were enough to carry my 78 kg of living weight))), but there were so many of them that I could not hold the scooter even resting on asphalt, the wheels begin to slip. I started making this miracle with an assessment of the size of a scooter by eye, placing children’s toys on the floor. Then he decided on the size of the wheels of the future scooter. As far as I remember 140mm in diameter.

I ran to the store “Everything for the garden and the garden” and bought 2 wheels for 180 rubles each. Then he glued several sheets of A4 format for marking parts in real scale.

On it I laid out the wheels, drew the base and depicted the entire scooter in profile, in full size. Then, from her, I transferred the images of individual parts to other sheets and glued them to the plywood.

There is also a beam 40×50 in my design. It serves to strengthen the site on which a person stands. Since the scooter is made of layered plywood 8 mm thick, and the site is very long and the weight is decent for it. And besides, it lies flat, then without amplification it will break even under the baby. She to this day bends a little around the edges. The plans to eliminate this, but at the time of writing the article, these are only plans. The beam was tested for strength in a barbaric way. Cut off the desired length to me, put on the threshold of the bathroom one edge, and the other on the floor. It turned out 2 points on the sides. The middle was completely hung in the air. Took his little daughter and we jumped with her as we could in the middle of the beam. He not only withstood, but did not even crumble. The steering wheel is made of a tube of presumably titanium origin, since such strength of aluminum and duralumin do not possess. From the end of the handle under the right hand is the variable resistor responsible for the speed of the scooter. A small fee with a chip K561LA7 is soldered to the resistor. This is my self.Proped shim on it is implemented and all this is right in the steering wheel. But the power transistor I used the IGBT to 60A, since the IRFZ44z fields in the amount of 3 pieces were out of order at once)))). You will probably think that I forgot to put the diode parallel to the motor from the back of the current, but you will be mistaken if you think so. I can only guess that the transistors knocked out due to direct voltage throws, since these fields are only 40 volts calculated. It is difficult to break through them, I fell over. But the IGBT stood well with me, because it is designed for 600V. But once having repaid it in the sand pierced it. At first I was at a loss, how did it happen? He really could not stand the current? But everything turned out to be more banal. My engine is not protected by anything, and the protective diode is soldered to its conclusions. And then I noticed that this reptile fell off with one leg from the Dvigla. I decided not only to move it to a fee (for greater reliability, so that it would no longer fall off), but also the control of redistribution on the button. After all, as practice has shown, it is not convenient to twist gas during movement, it’s not a motorcycle. Although maybe I just made an uncomfortable gazulka. But the button is more original and more functional, I will fasten dynamic braking to it. And in the future and the on.Board computer to create. After all, MK will already be on ready. Yes, yes, it will be he who will be instructed to control the IGBT by a transistor based on signals from buttons. And also close the transistor before turning on the dynamic braking relay. I want to apply the relay, they have a fairly high switching current and they are affordable. In general, I have been engaged in programming only PIC microcontrollers, but I have long wanted to try my hand at AVR. So the idea came up to apply the AT90S1200 I had an idle. Over, this is already an old subject. But at the time of writing, these are only plans. While I will describe everything that is now. I bought one to one in one with source of uninterrupted nutrition at 7a/h and 12V. Two pieces cost me 1400r. These gel batteries. At one time I read a lot about them before buying. The main criterion for choosing was that they can be loaded at home without fear of harmful vapors. My homemade charger for a car battery was by the way, because it is also automatic, and gel batteries are fear, as they do not like a reloading. I charge them with electric shock 500m. I never rode with fully charged batteries. But presumably they will be enough for 40 minutes of intensive driving. I will not say anything specific to the kilometer, but it is clearly less than I would like))). 10 kilometers is the limit. It’s a pity my smartphone has died, even if GPS check how quickly it goes. During skiing, I noticed that there were very large blows on the front wheel even from small irregularities on the road. Apparently this is from the fact that you have to stand closer to the steering wheel, since the batteries take up a lot of space behind. So I wanted to move them to the forward, let them hang out there, and the weight of the rider is almost the whole on the rear wheel. Fortunately, I bought wheels with a margin of strength and 100 kg on the wheel is its nominal load. Compared to the front, the rear wheel calmly overcomes obstacles and is attached to my design much tougher. Well, now there are not many photos and videos: the assembly process of fitting and manufacturing and here is the test. True, I shoot the Maltz who asked me to ride, but he is apparently afraid to go quickly, so he never accelerated until maximum speed: only registered and authorized users can leave Комментарии и мнения владельцев.

How to assemble a battery with your own hands (subtleties and tips)

Electro.Bikes are far from a novelty of the cycle industry, models are presented in all the variety of their shapes, sizes, colors and capacities of the electric motor for every taste of the consumer. Due to the high cost of such bicycles, many craftsmen collect them in their own hands. The main electric components of the electricbike are: electric motor, battery with charger and controller.

Ready.Made sets for transforming a conventional bicycle into an electric in the assortment are available on sale, but in order to save money, they often equip the vehicle with suitable engines removed from various electric utensils. If you have practically converted your bike into an electric bike and the case remains only behind the battery, then in principle there are few options. Buy ready.Made or make a bicycle battery with your own hands, collecting it from cells.

The battery is the most important indispensable part of the electric bike, the heart of the entire mechanism, with which the bicycle engine is provided with power. If the power source is discharged or fails, you have to pedal the old fashioned way.

Electric Supratricaton from a screwdriver

There are many interesting videos on the Internet, and once again watching the videos on YouTube, I came across a RAZOR electric garden overview. I wondered how much this type of transport is popular. Having wandered over the Internet, it turned out that this is a very common thing. Later resting on the Sea of ​​Azov in the city of Yeysk, I personally saw an industrial Chinese electric shock with wide wheels with brake discs. Apparently those who have large batteries and charge enough for 40 km. I was struck by a powerful frame. A kind of small moped))))). The price of scooters captivates.

From 12,000 per scooter with an electric motor 350W. But I did not stop there and found several articles of home.Made electric scooters. I really liked the idea of ​​a home.Made electric scooter from a screwdriver and I decided to create my own spawn from plywood. And the screwdriver applied some kind of Austrian. It was a battery drill with a shock and 24V battery. I got it for nothing.

It was of course scary at first, I was visited by doubts whether the engines capacities were enough to carry my 78 kg of living weight))), but there were so many of them that I could not hold the scooter even resting on the asphalt, the wheels begin to slip. I started making this miracle with an assessment of the size of a scooter by eye, placing children’s toys on the floor. Then he decided on the size of the wheels of the future scooter. As far as I remember 140mm in diameter. I ran to the store “Everything for the garden and the garden” and bought 2 wheels for 180 rubles each.

Then he glued several sheets of A4 format for marking parts in real scale. On it I laid out the wheels, drew the base and depicted the entire scooter in profile, in full size. Then, from her, I transferred the images of individual parts to other sheets and glued them to the plywood. And straight on them cut out the details.

There is also a beam 40×50 in my design. It serves to strengthen the site on which a person stands. Since the scooter is made of layered plywood 8 mm thick, and the site is very long and the weight is decent for it. And besides, it lies flat, then without amplification it will break even under the baby. She to this day bends a little around the edges. The plans to eliminate this, but at the time of writing the article, these are only plans. The beam was tested for strength in a barbaric way. Cut off the desired length to me, put on the threshold of the bathroom one edge, and the other on the floor. It turned out 2 points on the sides.

The middle was completely hung in the air. Took his little daughter and we jumped with her as we could in the middle of the beam. He not only withstood, but did not even crumble. The steering wheel is made of a tube of presumably titanium origin, since such strength of aluminum and duralumin do not possess. From the end of the handle under the right hand is the variable resistor responsible for the speed of the scooter. A small fee with a chip K561LA7 is soldered to the resistor. This is my self.Proped shim on it is implemented and all this is right in the steering wheel.

But the power transistor I used the IGBT to 60A, since the IRFZ44z fields in the amount of 3 pieces were out of order at once)))). You will probably think that I forgot to put the diode parallel to the motor from the back of the current, but you will be mistaken if you think so. I can only guess that the transistors knocked out due to direct voltage throws, since these fields are only 40 volts calculated. It is difficult to break through them, I fell over. But the IGBT stood well with me, because it is designed for 600V. But once having repaid it in the sand pierced it.

And in the future and the on.Board computer to create. After all, MK will already be on ready. Yes, yes, it will be he who will be instructed to control the IGBT by a transistor based on signals from buttons. And also close the transistor before turning on the dynamic braking relay. I want to apply the relay, they have a fairly high switching current and they are affordable. In general, I have been engaged in programming only PIC microcontrollers, but I have long wanted to try my hand at AVR. So the idea came up to apply the AT90S1200 I had an idle. Over, this is already an old subject.

But at the time of writing, these are only plans. While I will describe everything that is now. I bought one to one in one with source of uninterrupted nutrition at 7a/h and 12V. Two pieces cost me 1400r. These gel batteries. At one time I read a lot about them before buying. The main criterion for choosing was that they can be loaded at home without fear of harmful vapors. My homemade charger for a car battery was by the way, because it is also automatic, and gel batteries are fear, as they do not like a reloading. I charge them with electric shock 500m. I never rode with fully charged batteries.

Alteration of a regular self.Scatter in an electric shock

Homemade electric steamfish is a good alternative to an expensive device that can be bought in specialized stores. To save money and not reduce quality, it is necessary to correctly perform all the above actions. Among them:

  • Disassemble a broken electric drill with a running engine.
  • Similarly come with a non.Working grinder, leaving only an angular gearbox and an axis with a rotor.
  • After that, take an overall coupling and install it at the place of fixation of the disk of the grinder gearbox.
  • Then the part is connected to the engine removed.
  • At the next stage of operation, the wheel of a conventional self.Scatter is welded to the axis from the grinder.
  • The bearing is securely fixed to prevent its rotation during operation.
  • The axis of the engine gearbox is connected to the overall coupling.
  • The lithium battery is securely attached to the scooter frame.
  • The engine control button is brought to the control handle.
  • 4 wires are allowed from the regulator, the first pair of which goes to the power element, and the second to the electric motor.
  • All contacts are closed with insulation.
  • The frame of a homemade electric scooter is painted and left for several hours to dry out the applied composition.
  • Include the engine and check the performance of the vehicle.

How to make an electric steamer from a screwdriver?

The easiest manufacturing option allows you to independently make a scooter from a screwdriver. In this case, you will need to take a device whose engine works from the battery. If there is no way to find it, a trimmer motor may be a replacement. All stages of work are performed simply and quickly, so the finished electric steam can be obtained in a few hours.

  • At the beginning of the work, take a star from the bicycle and make several holes in it. Their number, size and location are chosen based on the type of wheels used.
  • The leading star is made from the metal plate. If there is no way to cut this part independently, it can be bought in any store with goods for bicycles and motorcycles.
  • Bought or made by your own hands of the structure of the structure is attached to the nozzle of a screwdriver.
  • On the scooter frame, mounting for the power tool used is mounted.
  • They try on a bicycle chain on the star, and then fix it.
  • A mechanism from the spring and cable is installed on the steering wheel handle. It will be used to turn on and off the screwdriver engine.
  • All the details of the scooter are covered with a special composition that protect metal parts from corrosion.
  • Collect the vehicle and conduct its tests.

All of the listed actions do not require skills of such work, so even a beginner is able to cope with the task.

The process of self.Scatter independent manufacturing is a difficult event that requires great efforts from the master and observing the correct sequence of actions. If you manage to avoid errors, the result of the work will be a quality vehicle that will appeal not only to the child, but also to the adult.

Homemade electric boat made from a screwdriver: Step.By.Step manufacture Humadies with photos and description, also video tests.

  • Kick scooter.
  • Battering screwdriver.
  • Chain and star from a bicycle.
  • Sheet metal.
  • Rule of steering wheel with a cable.
  • Bolts and nuts.

The bicycle star had to be finalized and make holes for attaching to the wheel.

The author made the leading star on his own from a metal plate.

A fastening on the scooter frame was made under the screwdriver.

To control the turnover button, the author installed a mechanism from a spring and a cable on a steering wheel handle.

We recommend watching the author’s video where the process of manufacturing electric scooter with your own hands is shown, as well as its tests.

DIY Electric Summarks: What you need?

To create a working electric scooter, you will need:

Additionally, fasteners (nuts, bolts) and assembly tools will be required. It is first recommended to assemble all parts to electrify the scooter, create a connection diagram and only then proceed to “welding” and a full.Fledged staffing.

The base is a frame, deck and wheels. You can assemble an electric steamer on the basis of a conventional scooter or scooter. But you can make it yourself. In this case, special attention should be paid to the choice of wheels. They are of different diameters:

  • Up to 8 inches. They are not used for homemade electric scooters, since it is very low, and when attaching the battery for deco with wheels, the risk of damage and battery and the entire body is very high.
  • 10-12 inches. The best option for a small electric scapard of your own assembly.
  • Than 12 inches. Such wheels will be able to drive even along broken roads, but they are expensive and installing them on a simple scooter is inappropriate.

Motor

On sale you can find a special motor-wheel, in which the engine has already been built. You can install the motor both on the front and on the rear wheel. The pluses of installation of the motor in front include ease of driving a vehicle. The engine on the rear wheel is installed immediately with the brake, so the speed of speed occurs more smoothly.

Controller

Controller is a connecting mechanism. Thanks to him, the scooter starts and slows down at the request of the owner. It is better to buy it separately after the owner to determine the power of the motor. Under the characteristics of the engine and the controller is selected.

Battery

Lead batteries cannot be put on a homemade electric steamer, as they will be too heavy and will affect the center of gravity and management. The best option is a light lithium-ion battery (or its analogues).

The battery is installed in any place:

  • Under the decree with wheels (you will need an additional mount to protect the battery);
  • On the steering pipe in a bottle, if there is a mount under it;
  • On the steering pipe, if there are 2 of them and there is a place between them;
  • On the trunk;
  • In a basket or bag on the steering wheel.

PB Swiss Tools Innovation Electronic Screwdriver (EN)

When installing the battery, it is important that it does not outweigh the rest of the scooter, so the installation under the deck is the best option.

Management elements

In order for the first trip on an independently assembled scooter to become the last, control elements will be required:

If you buy a set to electrify the scooter, you can additionally choose even a speedometer. But to create a scooter with a motor according to the simplest scheme, 3 of the above elements are enough.

All of them are carried out through the steering pipe from the controller and fixed on the handles. Even in the presence of control elements, scooters can be launched from a push. The control elements help control the speed while moving.

It is quite difficult to make an electric steamfish for a beginner. Some problems arise even among experienced masters. Often the original base has to be expanded, additional holes are drilled so that the battery and other electrification elements are correctly stood up and do not fall off along the road.

Motor

Sometimes, in the manufacture of a scooter, unexpected options are chosen, for example, the engine cooling engine from the car. I met such an option on the forum on the assembly of scooters and bicycles. We do not recommend this, because they have a voltage of only 12V, with normal current power there will be too large.

  • Gearbox. Pluses. Lower weight, larger efficiency at low speeds, wonderful rolling. Cons-the gears wear out and will someday require replacements, increased noise, the impossibility of the regime of recuperative braking.
  • Direct drive (DD). Pros. There are no gears, only bearings wear out, very small noise, you can use the regime of recovery braking. Engine braking is a great option for the area with large height drops. Cons. Greater weight, worse rolling.

The main characteristic of the engine is its power, which depends on the rated voltage and current. The power of the motor is selected depending on the estimated speed and terrain relief.

The most optimal option that is suitable in most cases is an average engine, about 350 watts, it allows you to accelerate to 30-40 km/h in various areas-plain or hilly. In this case, comfort and confidence is felt. At greater speed, a sense of confidence and security is often lost.

If you are not afraid of high speed and plan to drive quickly, you will need a powerful engine. 500 watts or more.

For a leisurely driving along the flat terrain at a speed of about 25-30 km/h, there is enough motor with a capacity of 250-300 watts, of course, the speed will decrease in the hill. For children and adolescents, it is better to choose models that can develop a speed of not more than 20-25 km/h.

For more and confident control, we need a wider steering wheel, because we will have quite wide wheels. Almost any steering wheel is easy to suit both from the Soviet model and from modern mountain bikes.

We fix it on the steering column, having previously adjusted the clamp with an aluminum bracket with a bolt puff. If the steering wheel is quite thick, then in it you can easily place the throttle and the Hall sensor.

Do.It.Yourself electric shock. General principles and rules

Everyone will be able to make an electric steamfish on their own. In this case, it will be necessary to learn the generally accepted rules for its manufacture, as well as adhere to the main principles of work. In the process of creating a vehicle, the following norms should be guided by:

  • Before starting work, you need to decide on the basic device, on the basis of which a scooter will be made. In most cases, experienced masters recommend using gyro scooter, radiator cooling engine or screwdriver. Each option has its advantages and disadvantages, so the choice of one of them depends only on the preferences of the manufacturer.
  • The easiest way is to make a scooter from an ordinary screwdriver, so all newcomers are advised to master an exciting business using this basic device.
  • Most often, a chain is used to transmit torque, t.To. Just install and maintain it. Among alternative options, the most popular are hard transmissions, a couple of gears and friction nozzles.
  • Of the two wheels installed, one should be a leading. If you choose the rear, the installation process will become simpler, and if the front, the scooter will be better controlled.
  • To make an electric steamfish with your own hands, it is necessary to make a solid frame. It is advised to make it from ordinary steel pipes, the thickness of which does not exceed 2.5 mm. If you need a home.Made device to withstand a load of 100 or more kilograms, you should choose pipes with thicker walls.
  • The power source may be a lithium battery or a native battery of the device (in the manufacture of a scooter from a screwdriver). In addition, you can use nutrition elements from various modern toys.

How to make an electric steamfish with your own hands?

The best choice would be to watch a video on YouTube before starting work. Look for specifically the assembly of a scooter on the basis of your chosen engine and with your chosen transmission. There are videos for almost all existing options.

Steamed Shrimp Recipe

And, in any case, you will need any experience with your hands. Ideally, if you have already worked with electricity and metal. If there is no experience, we strongly recommend finding a assembly partner or at least a consultant. A person who can see your idea and project, give his Комментарии и мнения владельцев on it.

If you do everything carefully, with your own hands, the electric shock will cost only 5-7 thousand rubles, which means that you can save a noticeable. Success in the assembly!

Do.It.Yourself electric shock from a screwdriver

There are many interesting videos on the Internet, and once again watching the videos on YouTube, I came across a RAZOR electric garden overview. I wondered how much this type of transport is popular. Having wandered over the Internet, it turned out that this is a very common thing. Later resting on the Sea of ​​Azov in the city of Yeysk, I personally saw an industrial Chinese electric shock with wide wheels with brake discs. Apparently those who have large batteries and charge enough for 40 km. I was struck by a powerful frame. A kind of small moped))))). The price of scooters captivates. From 12,000 per scooter with an electric motor 350W. But I did not stop there and found several articles of home.Made electric scooters. I really liked the idea of ​​a home.Made electric scooter from a screwdriver and I decided to create my own spawn from plywood. And the screwdriver applied some kind of Austrian. It was a battery drill with a shock and 24V battery. I got it for nothing. It was of course scary at first, I was visited by doubts whether the engines capacities were enough to carry my 78 kg of living weight))), but there were so many of them that I could not hold the scooter even resting on the asphalt, the wheels begin to slip. I started making this miracle with an assessment of the size of a scooter by eye, placing children’s toys on the floor. Then he decided on the size of the wheels of the future scooter. As far as I remember 140mm in diameter.

I ran to the store “Everything for the garden and the garden” and bought 2 wheels for 180 rubles each. Then he glued several sheets of A4 format for marking parts in real scale. On it I laid out the wheels, drew the base and depicted the entire scooter in profile, in full size. Then, from her, I transferred the images of individual parts to other sheets and glued them to the plywood. And straight on them cut out the details.

There is also a beam 40×50 in my design. It serves to strengthen the site on which a person stands. Since the scooter is made of layered plywood 8 mm thick, and the site is very long and the weight is decent for it. And besides, it lies flat, then without amplification it will break even under the baby. She to this day bends a little around the edges. The plans to eliminate this, but at the time of writing the article, these are only plans. The beam was tested for strength in a barbaric way. Cut off the desired length to me, put on the threshold of the bathroom one edge, and the other on the floor. It turned out 2 points on the sides. The middle was completely hung in the air. Took his little daughter and we jumped with her as we could in the middle of the beam. He not only withstood, but did not even crumble. The steering wheel is made of a tube of presumably titanium origin, since such strength of aluminum and duralumin do not possess. From the end of the handle under the right hand is the variable resistor responsible for the speed of the scooter.

A small fee with a chip K561LA7 is soldered to the resistor. This is my self.Proped shim on it is implemented and all this is right in the steering wheel. But the power transistor I used the IGBT to 60A, since the IRFZ44z fields in the amount of 3 pieces were out of order at once)))). You will probably think that I forgot to put the diode parallel to the motor from the back of the current, but you will be mistaken if you think so. I can only guess that the transistors knocked out due to direct voltage throws, since these fields are only 40 volts calculated. It is difficult to break through them, I fell over. But the IGBT stood well with me, because it is designed for 600V. But once having repaid it in the sand pierced it. At first I was at a loss, how did it happen? He really could not stand the current? But everything turned out to be more banal. My engine is not protected by anything, and the protective diode is soldered to its conclusions. And then I noticed that this reptile fell off with one leg from the Dvigla. I decided not only to move it to a fee (for greater reliability, so that it would no longer fall off), but also the control of redistribution on the button. After all, as practice has shown, it is not convenient to twist gas during movement, it’s not a motorcycle. Although maybe I just made an uncomfortable gazulka. But the button is more original and more functional, I will fasten dynamic braking to it. And in the future and the on.Board computer to create. After all, MK will already be on ready. Yes, yes, it will be he who will be instructed to control the IGBT by a transistor based on signals from buttons. And also close the transistor before turning on the dynamic braking relay. I want to apply the relay, they have a fairly high switching current and they are affordable. In general, I have been engaged in programming only PIC microcontrollers, but I have long wanted to try my hand at AVR. So the idea came up to apply the AT90S1200 I had an idle. Over, this is already an old subject. But at the time of writing, these are only plans. While I will describe everything that is now. I bought one to one in one with source of uninterrupted nutrition at 7a/h and 12V. Two pieces cost me 1400r. These gel batteries. At one time I read a lot about them before buying. The main criterion for choosing was that they can be loaded at home without fear of harmful vapors. My homemade charger for a car battery was by the way, because it is also automatic, and gel batteries are fear, as they do not like a reloading. I charge them with electric shock 500m. I never rode with fully charged batteries. But presumably they will be enough for 40 minutes of intensive driving. I will not say anything specific to the kilometer, but it is clearly less than I would like))). 10 kilometers is the limit. It’s a pity my smartphone has died, even if GPS check how quickly it goes. During skiing, I noticed that there were very large blows on the front wheel even from small irregularities on the road. Apparently this is from the fact that you have to stand closer to the steering wheel, since the batteries take up a lot of space behind. So I wanted to move them to the forward, let them hang out there, and the weight of the rider is almost the whole on the rear wheel. Fortunately, I bought wheels with a margin of strength and 100 kg on the wheel is its nominal load. Compared to the front, the rear wheel calmly overcomes obstacles and is attached to my design much tougher. Well, now there are not many photos and videos:

Do.It.Yourself electric shock. General principles and rules

Everyone will be able to make an electric steamfish on their own. In this case, it will be necessary to learn the generally accepted rules for its manufacture, as well as adhere to the main principles of work. In the process of creating a vehicle, the following norms should be guided by:

  • Before starting work, you need to decide on the basic device, on the basis of which a scooter will be made. In most cases, experienced masters recommend using gyro scooter, radiator cooling engine or screwdriver. Each option has its advantages and disadvantages, so the choice of one of them depends only on the preferences of the manufacturer.
  • The easiest way is to make a scooter from an ordinary screwdriver, so all newcomers are advised to master an exciting business using this basic device.
  • Most often, a chain is used to transmit torque, t.To. Just install and maintain it. Among the alternative options, the most popular are hard gears, a couple of gears and friction nozzles.
  • Of the two wheels installed, one should be a leading. If you choose the rear, the installation process will become simpler, and if the front, the scooter will be better controlled.
  • To make an electric steamfish with your own hands, it is necessary to make a solid frame. It is advised to make it from ordinary steel pipes, the thickness of which does not exceed 2.5 mm. If you need a home.Made device to withstand a load of 100 or more kilograms, you should choose pipes with thicker walls.
  • The power source may be a lithium battery or a native battery of the device (in the manufacture of a scooter from a screwdriver). In addition, you can use nutrition elements from various modern toys.

DIY Electric Scooter Assembly

Today there are a fairly large number of factory electric scooters on the market and you can choose for every taste and wallet.

But any product is known to be calculated for the average buyer.

One folding and light, but slowly rides and does not start from the place.

The second starts and accelerates perfectly, but too heavy.

What to do if you want a scooter for your requests ?

There are two options. Either take the factory and finalize, or assemble the device yourself from scratch.

Both options have the right to life and how to go. A personal choice of everyone.

I will try to outline how the set of elements for independent assembly is equipped.

The main element of the collected scooter is the “base”.

The base of scooters are conditionally divided into subspecies:

Scooters with wide, not bicycle rubber are a little apart. Rino, Evo, Scruser and their clones are also listed as scooters, although they are clearly closer to the motorllers and scooters in terms of engines and appearance.

So the base, it is from it that you should start dancing.

The final running qualities of the electric scooter depend on the choice of the base.

What should be paid attention to first ?

The dimensions of the wheels, cast or inflatable, the presence of a suspension, a place for a convenient location of the battery and the width of the dropouts for installing a motor.

If your city has a mirror asphalt that is washed every evening with shampoo then 5.5 inches is quite suitable for you.

If the tiles and cracks in the asphalt. 8 inches is a minimum and is very desirable pneumatics.

If your asphalt did not know the repairs for the past 10 years. Do not even watch below 12 inches.

If you want to go at a speed of 40 with a tail and not be afraid to fly to the kubarom on an unexpected hole ? From 16 inches and above.

The suspension partially reduces blows from irregularities on small wheels, but the rule “the wheel can move an obstacle not to higher than half of its diameter” will not go anywhere.

The location of the battery. Options. In the deck, in the steering rack, on the steering wheel in the bag or case, on the trunk, in the backpack.

Some scooters have a cavity in the decree, which allows you to use it for packaging the assembly of batteries there.

Pluses. Low center of gravity, appearance. Cons. It is necessary to additional battery protection from strikes about the protrusions of the roadway.

In the steering rack, you can place the battery if it consists of several pipes and there is a free space between them. Pluses. The battery does not significantly affect the weight of the scooter, in the manufacture of cladding, the scooter is not afraid of falls. Cons. The complexity of work.

Also, some scooters have mounts for a bottle on the steering rack, where you can fasten a case or battery in a “bottle”. Pros. Simplicity of installation, lightness. Cons. Interferes when driving, when falling, you can break off the mounts.

On the steering wheel in the case, you can place the battery. Pros. Simplicity of installation, lightness. Cons. Worsening of the weightlift, more tangible blows into the front wheel. When falling, there is a chance of breaking the body.

On the steering wheel in the bag, the battery is usually made for small and folding scooters. A photo equipment bag is sufficient for a small battery and does not attract attention. Pros. Simplicity of installation, cons, risk of battery damage when falling.

The battery on the trunk is a popular solution of the first electric bikes. For scooters is low, due to the lack of trunk on most of them. Pros. Simplicity of installation, lightness. Cons. A change in the weightlift, tangible blows into the rear wheel.

It is also possible to skate with a battery in a backpack and a wire with a connector for a scooter itself. Pluses. The ability to insulate the battery for use in the winter period. Relief of the scooter, due to which maneuverability and ranging to active skiing with jumps increase significantly. Cons-diseases of the spine on constant load (depending on the battery weight), a change in the weighting to the side of the motor.

This is the distance between the seats in the front or rear fork of the scooter.

The landing size of the scooter motor-coat will also depend on the selected category of the base.

For micro and mini standard motor-rifts 45 or 65 mm. To make it more. 100 mm.

Bicycle MK for the front wheel also just have a 100mm standard.

There are MK 110, with a brake disc, but less often.

135mm is already a bicycle size of the rear wheel, under the gear on one side.

The electrical part of the electric scooter is quite simple, 4 points are a battery, controller, motor and controls.

Previously, the batteries were made lead, heavy, with a low resource of 300-400 cycles and small charge currents-discharge.

Modern electric scooters drive on varieties of lithium battery-lithium-ion, lithium-polymer, lithium-zhelezophosphate.

Lithium-polymer (LIPO) battery has a favorable cost, high charge and category currents, resource of 500-800 cycles.

But fire hazardous. I do not recommend applying them.

Lithium-Ion (Liion)-500-1000 cycles, small weight, temperature dependence.

In general, there are three subspecies, depending on the type of chemistry. Some have a higher capacity, but more internal resistance, others high.Precision, but do not shine with a capacity.

Require protection against mechanical damage when used on scooters.There have been cases of fire from Ion from strokes when falling.

Lithium-Zhelezophosphate (Lifepo4)-approximately twice as heavy as Ionok, more expensive. Produce and accept large currents, a resource of 2000 cycles.

Not fire hazardous, quite straps in mechanical deformations. Can be discharged at minus temperatures.

The drive of the scooter wheel from the external motor with a belt or chain is still found, but it clearly loses its position to the motor.

Motor-wheels The best choice of a motor for a dump truck.

They are of two types. Gearbox and direct drive. We will analyze the difference, the pros and cons of each type.

Easier than MK direct drive of the same power, better efficiency at low speeds. Excellent rolling, due to the presence of frivil, which is very useful when using a scooter on foot thrust. There are wearing details-gear, someday they will require replacement. Noise. The gearbox howls when working. The impossibility of recuperative inhibition. A little best forcing potential due to large rotation speeds.

Heavier than gearboxes, worse for a tooth effect. There are no wearing parts in addition to bearings in such MK. Low.Noise, and when using a sinus controller can be generally silent. Have the opportunity to use braking with recovery. Justify themselves when using a scooter in areas with large height changes and as a means of saving brake pads. When installing MK on mini and micro.Scutures, it happens that recovery is the only adequate brake on board.

Electric Supratricaton from a screwdriver

Homemade electric boat made from a screwdriver: Step.By.Step manufacture Humadies with photos and description, also video tests.

  • Kick scooter.
  • Battering screwdriver.
  • Chain and star from a bicycle.
  • Sheet metal.
  • Rule of steering wheel with a cable.
  • Bolts and nuts.

The bicycle star had to be finalized and make holes for attaching to the wheel.

The author made the leading star on his own from a metal plate.

A fastening on the scooter frame was made under the screwdriver.

To control the turnover button, the author installed a mechanism from a spring and a cable on a steering wheel handle.

We recommend watching the author’s video where the process of manufacturing electric scooter with your own hands is shown, as well as its tests.

Detailed instructions with photos. On current

Over the past few decades, the achievements of technological progress gave the average user a huge number of most incredible developments. Without a doubt, all these devices thoroughly influenced the quality of life of citizens and one of these “toys”, became a scooter equipped with electric traction.

It is convenient to wear/carry a machine with you, and in the city, you can cover a distance of 15-30 kilometers and even more-it all depends on the electric scapol model. They ride high.Tech development in the summer in the park, get to the place of work, you can be extremely mobile and just get a high from skiing. They charged the unit in 3-4 hours and forward, towards new adventures!

Which is better. A purchased electric shock or with your own hands?

You saw for this same electric chapter and categorically wished to get the device at your disposal. But, a completely reasonable question arises immediately-where to get this miracle machine, to satisfy their daily needs? And there are two options: buy a finished product or build it yourself. However, the latter option is possible only if the little hands are growing from the right place. If this is not the case, then unfortunately, you will have to be content with the first option. Maybe it’s better, but further information for those who are ready to be fully equipped.

Of course, it will be easier to buy in any case, even if you are a great master. However, this is an expensive pleasure and that you actually receive at your disposal for such a solid amount? A miniature toy, which despite an impressive price tag, which is called “barely breathing”! In principle, you can give preference to more serious devices that cost even more, however, it is necessary to take into account the fact that the developers rushing into the European market often set restrictions on maximum speed on their products, which, which does not play on the hand of the user, not there is always the opportunity to get around.

And suddenly, you quickly get fed up and in a week, you will want to have a more powerful and faster means of transportation at your disposal? Or, you may need a lightweight design, which you can easily carry with you with one hand almost anywhere. So, what is I visible: assembly of an electric self.Scatter on their own, will allow the user to introduce any transformations into the design of the newfangled mechanism. You can manipulate power potential and mass in accordance with your needs, so in the future, you should not have any doubts about the equipment collected by your own hands.

We recall our skills

Finally, after long painful thoughts, you came to the conclusion that the acquisition of an expensive thing is not your! What is the further course of events in this case? First. Check your skills: you must be able to use the soldering iron well and wield a screwdriver, that is, make neat holes in the metal using this device.

So, if you love to construct and do not see any obstacles to realize your ideas, follow the advice below and you will succeed without any doubt.

make, electric, steamer, screwdriver, additional

What do you want from your vehicle?

First of all, we decide what exactly we need? A bulky device equipped with inflatable wheels, offering its owner a high power indicator, which has the opportunity to overcome not small distances, while wounding asphalt on wheels? Or a lightweight folding structure, which can be carried without much strain with one hand and used for trips to work, and for other places, such as a fitness club, bypassing the stuffy and sometimes not often walking public transport?

Here is an example with a folding design. For the implementation of the conceived life, we will need a folding scooter with the rear shock absorber. The product will need to change the rear fork to wider and in addition, adapted there MK. Naturally, you will need to purchase a controller, as well as a battery, introduce all this wealth into our home.Made self.Propelled guns and clear, correctly connect.

Top 10 Camping Gadgets Put to The Test

Choosing a scooter for our transformations. You will not have to bother for a long time, since the choice is extremely scarce. Earlier, the ubiquitous Chinese have developed a scooter frame equipped with a two pendant system and on its base, manufacturers began to assemble various modifications of scooters and it was this “cart” that we will need.

The more expensive the structure, the, in theory, its quality should be better. A folding frame with a suspension mechanism cannot please the user with reliability in principle, but we don’t really have a choice.

An electrified scooter will “please” its owner the same misunderstandings as an ordinary unit, so you need to prepare for these troubles in advance. The electric scooter will also be shaken in the same way, to cry out and make noise mobile components of structures.

The larger the number of moving parts in your device, the more carefully you need to follow them. This rule is equally applied to both the purchased folding scooters and the artisan. Why then we prefer a gadget with a suspension? And then, in the first place, you need to replace the rear fork and wheel.

The assembly of an electric self.Chat with your own hands should develop according to the following scenario:

One. The extended part should be in place of the rear fork and there you still need to be implemented MK.

The next step is the assembly of the case, and we will use the aluminum profile for this.

Drilling rod for screwdrivers (do it with our own hands)

In today’s article, we will consider how to make a simple drill stance for a screwdriver. For its manufacture, the author uses plywood.

The first thing you will need to make a clamp for a screwdriver. What the whole design looks like, you can see below.

We cut out the desired part of plywood, drill holes in it, and then saw it into two parts, which will be tightened with bolts.

See also: DIY multi.Grinding machine

Also, in the clamp, you need to drill two holes for the guides, along which it will move up and down.

If you are lying around without trial of lumber (bars, boards), then from them you can make a drilling rack for an electric drill.

The main stages of work

At the next stage, we fasten two slats to the clamp. We cut the base from plywood, drill seats and install two guides (in this case, wooden).

See also: How to make a corner clamp from plywood with your own hands

make, electric, steamer, screwdriver, additional

To the base we fasten the side guides for the racks. For better sliding the rail can be lubricated with soap.

At the end, it remains only to drill a hole at the base, as well as make a support stand, which is attached from below.

See also: Home.Made adaptation for circular saw

Information on how to make a drilling rack for a screwdriver can be seen in the video below. This idea was shared with us by the author of YouTube Channel Franks shed.

DIY gyro scooter replacement. Starwheel.Ru

This review will clearly show the process of replacing gyro scooter 6.5, 8, 10 inches, without replacing headlights and diodes of central indication, it consists of 2 stages: disassembly with the dismantling of plates and reverse assembly of a gyro scooter.

You will need tools: screwdriver or screwdriver, stationery knife and/or round.Liners.

  • Gently lift the lower parts of the case and disconnect from the boards the train of the charger nest, the buttons of the VCL/Off, the diodes of the running lights, Bluetooth module. We completely remove the lower parts of the gyruscate case.
make, electric, steamer, screwdriver, additional
  • Unscrew the nuts fixing the VKL/slope button, the charger nest and take them out of the gyro scooter. Sometimes the button and the nest are additionally fixed by thermocleys for waterproofing, if so, remove the glue using a stationery knife or round.Liners. If the installed button and plug of the charger are suitable for a new set of boards, you do not need to change them.
  • We unscrew the (screwdriver ) fasteners of the motherboard (4 pcs), side boards (4 pcs on each board), a plastic battery holder (4 pcs), this is necessary to dismantle the trains of the battery holder.

The stage of installation of new gyro scoots is in the reverse order.

Choose and buy boards for gyro scooter With delivery, you can in the Starwheel online store.

Top 5 Best Vegetable Steamer Review in 2022

Fast and inexpensive Repair of gyro scooters in Moscow

DIY electric scooter. The process is not very complicated, creative and interesting. On the Internet you can watch the video how and from what you can implement your idea.

As a result, you can make an unusual design apparatus with outstanding technical characteristics. Mistakes and failures are possible along this path. It is worth noting that not always a home.Made option may be cheaper than a factory.

It all depends on which materials and parts to use. However, the repair of an electric scooter made by yourself will make it exactly easier, because you will know all the parts and nodes.

And you yourself are responsible for their reliability. After all, if you independently repair a scooter purchased in a store, then this may deprive the factory warranty.

It is necessary to protect the battery block from damage. It is also worth taking care of the moisture protection of all electrical elements and connections to avoid close. It is worth refraining from the use of electric scooter in rainy weather.