How to make an unlocked motoblock. What is this design?

How to make a differential for a motorcycle block. Motoblock with a differential: a overtaking coupling and unlocks, how to make a lock with your own hands. Drawings. Manual or automation

Structurally, the simplest way to solve the wheels of the problem arising due to the strict connection is the use overall couplings, which allow the wheel to rotate faster than the axis is driven in motion.

Overally couplings

This mechanism is well.Known in all its variations: both with a ratchet mechanism (a bicycle wheel sleeve), and with the grinning of the rollers (Bendix of the electric steamer).

Overall couplings are used in power drive a number of cars with connected axes. However, such a solution has a characteristic feature: when turning the turn, the overtaking coupling is disconnected on a wheel walking along the external radius, since it seeks to rotate faster than the drive shaft.

To facilitate entering the turn, on the contrary, most of the torque should be informed precisely.

This problem is solved in the classic gear differential, Distributing power inversely in proportion to the resistance of rotation of the wheels.

Wheel types for Neva

Neva motoblocks have a wide range of application. Regardless of the type of attachment with which they will work, it is impossible to do without wheels.

Their selection must be approached with particular caution to exclude the likelihood of difficulties with the installation. Select pneumatic fires and metal

Pneumoles

Neva rubber wheels are equipped with:

In this video, we consider the Neva walk.Behind tractor:

In addition, axes extensors are given.

The wheels are installed on the gear shaft so that the spikes are located in the direction of movement.

In Russia, the wheels for motor blocks Neva are produced by four models, their characteristics:

  • Kama-421:
  • Permissible load. 160 kgf;
  • Tire width. 155 mm;
  • Mass. Up to 6.9 kg.
  • L-360:
  • External diameter. 475 mm;
  • Maximum load. 180 kgf;
  • Pressure at maximum load. 1.62 kgf/cm²;
  • The mass does not exceed 4.6 kg.
    • L-355:
    • External diameter. 475 mm;
  • Max load. 180 kgf;
  • Pressure at maximum load. 1.52 kgf/cm²;
  • Weight. Not more than 4.6 kg.
  • L-365:
  • External diameter. 425 mm;
  • Maximum load. 185 kgf;
  • Pressure, in the case of maximum load. 2.24 kgf/cm²;
  • Weight. No more than 3.6 kg.
  • If necessary, it is possible to use the camera.

    Metal wheels

    Soil.Bearing are used if necessary to increase traction efforts, which ensures a larger indicator of the grip with the soil.

    In the case of motoblocks, several types of wheels are used:

    • Wide. The best option in the case of working with a plow, digger or during transportation along a wet dirt road. It is recommended to load the wheels with cargo, the weight of which is at least 20 kg (for each).
    • Narrow tall. The best option for increasing the indicators of road clearance during plants of plants, the height of which does not exceed 25 cm.

    Depending on the situation, a choice is made in favor of one of their types.

    The need for differential

    Many works carried out using a walk.Behind tractor (for example, cultivation) suggest it Direct movement. In this case, a hard drive on both wheels, significantly reduced and simplifying motoblock works greatly.

    This is especially difficult if the motorcycle block has wide track And a fairly large weight.

    How to make a home.Made differential for a walk.Behind tractor with your own hands. Drawings

    How to make a differential for a walk.Behind tractor with your own hands? As a rule, the operation of a motor block does not require a long rotation of the wheel relative to the drive axis.

    Due to this, frequently called “Semi.Dyspresent” schemes, which ensure the possibility of free rotation of the wheel relative to the axis to a certain angle.

    Details about the “semi.Dispersed” watch at the video:

    The simplest mechanism In this case, it looks like a sleeve with a transverse slot mounted on the axis of the walk.Behind. A short axis is inserted inside this sleeve, fixed from the loss wrapped in its body through a slot with a bolt, and the wheel is already attached directly to the axis.

    In this case, when moving the motor block The drive axis turns the sleeve freely until the rear edge of the slot rises into the bolt, and in the future through it passes the torque to the axis.

    Soil cultivation is one of the main agricultural measures, which is a mandatory part of the annual regime of soil processing. By clicking on the link, read the convenient and practical cultivator of the lobby.

    The snowmobile allows you to quickly and comfortably move along the snow from one point to another, while also transporting a passenger or any cargo. Here are the model range and of the 2016 Yamaha snowmobiles.

    make, unlocked, motoblock, this

    The quality of grown products, its productivity, and, ultimately, the return on financial and physical investments, depends on the timely and qualitative use of special means when growing the crop. Here you will learn how to make a sprayer with your own hands.

    During the turn, the wheel, trying to overtake the drive, promotes the bolt forward along the slot, tearing the transmission of the torque, and the angle of light turn of the walk.Behind control depends on the length of the slot.

    How to add heading (h1, h2) buttons to tinyMCE with advanced theme, simple layout. HTML

    Such extension cords are extremely simple and can be made by low qualification machine guns, and therefore cheap and widespread. Usually they are made with several additional holes that allow Vary the width of the track motor block and rigidly connect the wheel with a drive axis if necessary.

    Drawings of these homemade differentials are widespread on the Internet.

    Disadvantage The described design is relatively Small possible angle free thorough of the wheel (no more than 240 degrees), since the transverse groove greatly reduces the overall strength of the mechanism, and a large internal friction, especially with the inevitable getting of the mud in the sleeve.

    Most often, extensors with free move are used on light walk.Behind, like a field.

    Differential for motoblocks of fireworks and similar Texas, foremen, VIKING, Forz, Sadko, Don, Huter, Profi, which have a relatively large mass, has a slightly more complex design, but also a larger angle of free passage. Within 330 degrees.

    Read more: Motoblock Niva 2MK, 9: Auto.Provincial, Spare parts, Price, and also why the second gear is knocked out and where the chain is used from the gearbox

    This is ensured by the fact that the engagement It is carried out by the protrusions on the extension cord of the drive axis and on a freely rotating hub fixed on it, equipped with ball bearings. Accordingly, the hub can make an almost complete revolution relative to the axis until it rises to the opposite edge of the protrusion.

    See also  How to make a potato planter for a power tiller with your own hands

    Turning a walk.Behind tractor with such differentials is tangibly easier.

    A number of structures allows the wheels to turn freely relative to the axis and more than one revolution. For example, differential motoblocks “Farmer” is two couplings, driven by levers on the steering wheel.

    If necessary, the owner of the walk.Behind tractor can draw the desired coupling, allowing the corresponding wheel to rotate for an arbitrarily long time.

    General advice

    Let’s start with the simplest option in the form extension cord with a transverse groove. It will be quite reliable, even being made of affordable low.Carbon steel.

    The extension cord of the axis

    The clutch component parts of the extension cable is best used with a head under the inner hexagon and milling a groove with a width equal to its outer diameter.

    In this case, firstly, There are no protruding parts, capable of wiping grass, and secondly, the bolt tightened to the stop will not be shaken over time.

    The gap between the sleeve and the lengthening axis cannot be made withLastly small, since when corrosion occurs, they will come to each other. It is very desirable to place a press olyc on an intelligible lubrication of the structure on the sleeve’s sleeve.

    Finishing processing of holes for bearings in the hub should be carried out after they are The flange and the rotation angle is welded Due to the inevitable warning of the part when welding.

    The independent manufacture of a differential for a walk-behind tractor cannot be called a technically difficult task, and this is proved by both the experience of many owners of garden technology, and the fact that common offers in online stores copy the initially artisanal structures.

    The purpose of this element

    Before you familiarize yourself with the varieties, manufacturing options and the mounting method, it is necessary to consider why the differential on the walk.Behind tractor is installed, namely:

    Homtom H1 Frp Bypass

    • The main function of this device is the distribution of power between the wheels of special equipment.
    • At the time of rotation of the wheel relative to the axis, this mechanism does not allow to slip an element passing through a smaller radius.
    • The load is regularly assigned to differentials, provided that the rotation of the wheels is created relative to the axis in another projection (when turning).
    • The device allows you to process a relatively larger mass (the load that appears when the axis direction changes).

    In other words, if special equipment or other transport is not equipped with these mechanisms, then when turning on one side, a significantly large load will be entrusted, which will entail a gradual way out of the entire suspension.

    make, unlocked, motoblock, this

    In this video, you will learn how to make a differential for a walk.Behind tractor:

    A device such as a differential for a walk.Behind tractor is recommended to collect and mount provided that there is an appropriate education and experience. If there are no skills in this matter, then you can always contact our company, where qualified employees will be ready to take up the manufacture and mounting of the device for special equipment. All work is performed quickly, reliably and efficiently. At the same time, we take a modest reward for our services.

    To do this, I needed Zhigulevsky hubs with axes (just for soil.Bearing), and hexagonal bushings.

    Making unlocks for wheelbars How to make differential hubs (unlocked) for a walk.Behind tractor.

    Differentials for the cultivator

    Usually the movement of cultivators is straightforward, so they use a hard drive to both wheels. However, when hilling the beds, the turns are often made, and the hard drive can complicate the work. In this case, there is a need to use a differential for a cultivator, which is easy to do with your own hands. The differential for the walk.Behind tractor has no design features compared to the differential for the walk.Behind tractor, so you can use the same schemes. The simplest homemade is a differential consisting of a sleeve with a transverse axis fixed by a bolt. This design allows you to adjust the rotation angle from 120 ° to 240 °, which is optimal for small.Sized motor cultivators.

    Overfinal couplings are often used as a differential. It is necessary for easy entry into a turn, as most walk.Behind engines work on a hard drive, which copes with a straightforward movement on a flat surface. However, when performing work involving frequent turns, or when moving along an uneven surface, the control of the motorcycle unit becomes difficult. On corners, one edge must be lifted to save the wheel walking along the outer arc from slipping, which can cause significant inconvenience. The overturning coupling allows one of the wheels to move faster, which makes the control of the walk.Behind tractor simpler.

    You can make an overall coupling in different ways using special details or what is at hand. For example, it can be made using a hub of Lada, in this case there is no need to buy or create a disk. The advantage of a homemade overall coupling in its price is in specialized stores its average price is 2500 r.

    Video with detailed instructions for creating a overtaking coupling from the parts from the Lada:

    How to make paired wheels yourself?

    Of particular interest among farmers I won a simple and even slightly rude, but effective way:

    • Then it is advisable to cut small tread on them;
    • The next step is that people buy a 5x50mm steel strip, weld squares with a side of 250mm and insert them into the rim;

    It is not difficult to get such useful devices, the main thing is to decide which options are necessary and select all the necessary “ingredients”.

    Wheel wheels on a motor block with your own hands

    Having dealt with the views of tires, you should find out how to do the same, but homemade. The first thing that is the Uhonor is. In any case you will not be able to make wheels for a walk.Behind tractor from zero. You will need the basis. Old pneumatic fires from the car, for example, from Oka or from Niva. In this matter, it all depends on your choice or the availability of suitable material. And, by the way, farmers do not recommend buying a new set of tires for alteration, since they are expensive and as a result you will not be able to save a decent amount, having done the remaining job yourself.

    The second thing, without which nothing will work. Before the start of the process, it is necessary to prepare drawings. This issue needs to be approached responsibly, and drawings must satisfy the requirements based on available materials.

    Cool wheels are often made, where an additional weighting agent can be put inside. With this option, we will start. The paired version is a quick and effective remake of the wheels, which is available to many. You will need 4 wheels with a good base of stainless steel (by the way, the masters have the entrance of the tire from Moskvich). It is also necessary to have iron plates with you. The process itself is carried out a few steps.

    • A rubber tire is removed from the base.
    • To the rim on which the tire is put on, it is necessary to weld several iron plates, up to 5 cm wide. Usually a square is formed from the plates, which is welded to one of the sides of the rim.
    • Further, the rim from the second wheel is welded to this square. Thus, you connect two rims with each other using plates and cooking.
    • At the last stage, the rubber is put on the rim.
    See also  Convert Makita 12v Screwdriver to Lithium Ion

    That’s all, you got the set you need. As you can see, their main advantage is a large width. Thanks to this, they look less like wheels from the car, and more for the option for a walk.Behind tractor.

    make, unlocked, motoblock, this

    The second option, how to strengthen pneumatic fires. Increase their wear resistance due to additional materials. In this way, you can redo the wheels of such a vehicle as a motorcycle or ATV. In general, you will need larger tires than from an ordinary passenger car. And large chains may be suitable for increasing stiffness.

    We proceed to the process itself: you need to weld the chains to pneumatic fires. You can try to connect them with rubber or iron rim. Next, they need to be made to the zabins so that they mimic soil.Spaces. The result should be like purchased metal wheels.

    With this way you will have to tinker so that the chains hold tightly and do not fly in the course of work. Here, locking chains with a rim that can be done using steel mounts and hooks will help.

    An additional element, which is often not enough for the convenience of working with a walk.Behind tractor, is an unlocked, sometimes it is called a differential. Since the tool itself is difficult, it is often difficult for them to manage, namely, turn in different directions. In this case, an unlocking device comes to the rescue. A special device that is attached to the wheels and increases their maneuverability in difficult areas.

    The instrument for unlocking is installed to the output rampart of your walk.Behind tract using bolts. In the course of work, it reduces the radius of rotation of the entire machine and increases the width of the rut. If you use a regular-based mini-tractor, then this thing is simply indispensable. You can make an unlocked on the basis of bearings, but in fact. The game is not worth the glow. On the market you can find a variety of variations, and there are unlocks inexpensive unlocks

    The most important thing is to find a specialist who will advise a good product

    So, if you have the need for a new “shoes” for a walk.Behind tractor and it is possible to use tires from a regular car or motorcycle, then why not try. This article shows the simplest and most popular options, but it all depends on your experience and skills. In fact, the solution is very simple, you will need only welding and some skills. But for a good result, consult with experienced craftsmen before starting work.

    About how to make wheels on a walk.Behind tractor with your own hands, watch in the next video.

    Types of wheels for a walk.Behind tractor

    Each motoblock is a multitask agricultural unit. Its design should be as balanced as possible, otherwise the machine will not be able to cope with the work for which it is intended. A special role in the installation of a walk.Behind tractor is played by the wheels with which it is equipped. Depending on their features, the wheels on the walk.Behind tractor can be of such types:

    Each type of wheel for walking around is suitable for solving various problems. Using certain elements of the movement of the agricultural unit, its owner gets the opportunity to increase the performance of the machine and make it more stable.

    “The design of the unlocked axis or the wheel hub”

    View all photos, drawings, pictures and schemes from the category of “wheeled and caterpillar drive” can be crossed by link. You will find even more materials with descriptions how to make a motor cultivator and adaptations to it in the section ” Drawings of components and parts of the walk.Behind tractor “Or making a sample from all materials of the site Motoblok.Populjarno.Com On the following marks: details, wheel axis, schemes.

    Planner 5D – Interior Design v1.10.14 Mod Apk Unlocked

    It is possible that you are looking for in one of the most viewed sections of our site:

    Drawings and photos of homemade walk.Behind and attachments (Click on the picture or name):

    make, unlocked, motoblock, this

    Комментарии и мнения владельцев on the material “Differential device diagram for a walk.Behind tractor»Are located at the bottom of the page. Here you can express your opinion, ask for advice from visitors to our site, share interesting materials, talk about your positive or negative experience during the assembly of motor blocks and trailers with your own hands. If you have questions or suggestions about this material, please leave your comment below. Those who want to share their photos by keywords ” Unlocked, differential, semi.Shaft lock, manual action, wheel axis, unlocked half.Axis, hub, diagram, device “Or on any other issues about diesel, gasoline, medium, medium or heavy homemade motoblocks, motor cultivators and hinged devices to them. You need to register and use the link” Add photos. “(Visible after registration on the page of all Photo albums of motoblocks and attachments ).

    The need for differential

    Many works carried out using a walk.Behind tractor (for example, cultivation) suggest it Direct movement. In this case, a hard drive on both wheels, significantly reduced and simplifying motoblock works greatly.

    If necessary, frequent steep reversal motoblocks of this type will require the application of noticeable physical efforts. One of the wheels will slow down with soil.Bearing, and the walk.Behind tractor will have to be tied, hanging the outer wheel into the air into the air.

    This is especially difficult if the motorcycle block has wide track And a fairly large weight.

    Types of wheels

    First you should figure out what types of wheels for a walk.Behind tractor generally exist. Since the technique is used in many farm processes, the equipment is different. This also applies to pneumatic sea, because the good result and ease of use depends on the correct components. It is important to note that you can not put ordinary road wheels from the Oka, Niva or Moskvich on a walk.Behind tractor. All the options presented below are more and harder. It will be more correct to compare them with kits from ATV, although they do not always have a suitable size.

    • Pneumatic. This option can be put for arable work and to remove roots from the soil. In appearance, these are large wheels, with a diameter of 40 cm and a width of 20 cm. The drawing on the tread should be rude so that the motor carrier works well on the basis. Often this option is in standard configuration and is famous for its wear resistance. Nevertheless, if they became unusable, then you should immediately look for a replacement.
    • Traction. The folk name of these wheels is a Christmas tree. All because of a pronounced pattern on their rubber. This type is also universal and suitable for a ceremonial or standard transport solutions. For example, they are often used by snowball players. Traction tires for a walk.Behind tractor are also distinguished by reliability in everyday life.
    • Solid (most often made of rubber). All.Lit configurations are ideal for rocky soil. They allow the walk.Behind tractor to move faster at such a relief and do not deteriorate after the first use. Of the minuses. They are really very heavy, so to endure them is not so easy. Similar tires are suitable for motoblocks of the MTZ series and diesel technology.
    • Metal. The last variation is suitable for clay soil. The thing is that, unlike previous wheels, these have steel teeth. This, of course, weights equipment, but in soft ground they do their job perfectly. In another way, metal teeth are also called soil.
    See also  Patriot Petrol Cutter Won'T Start

    As for general recommendations, when choosing what to put up your walk.Behind tractor, pay attention to the front wheel. It is supportive and in the process of use amortizes the entire mechanism. This helps to extend the life and improve the quality of work.

    In general, such a classification of pneumatic ground is used not only for the walk.Behind tract, but also for trailers or other tools from the same category. So she can be safely used, because to maintain the wear resistance of all the equipment in the assortment of the farmer, there should be both a trailer and a walk.Behind tractor.

    Motoblocks with wheels unlock

      Power, l.With.

    • 10 l.With.
    • 11 l.With.
    • 12 l.With.
    • 4 l.With.
    • 4.8-5 l.With.
    • 5 l.With.
    • 5.5 l.With.
    • 5.8 l.With.
    • 6 l.With.
    • 6.5 l.With.
    • 7 l.With.
    • 7.5 l.With.
    • 8 l.With.
    • 9 l.With.
    • 9.5 l.With.
    • Powerful
      Engine

    • With American (USA) engines
    • Briggs Stratton (b s)
    • Dinking
    • Hammermann
    • Honda
    • Hwasdan
    • Kasei
    • Kohler
    • Lifan
    • Loncin
    • Mitsubishi
    • Subaru
    • Weima
    • Yamaha
    • Zongshen
    • Pennant
    • With Japanese engines
      Electric launch

    • With an electric launch
      Producing country

    • America (USA)
    • England
    • Belarus
    • Italy
    • Canada
    • China
    • Russia
    • Ukraine
    • France
    • Sweden
    • South Korea
    • Japan
      Application

    • For plowing

    Barbie Dreamhouse Adventures Unlock Ken Pool Party HD

      Number of programs

    • 2 forward/1 ago
    • 2 forward/2 ago
    • 3 forward/1 ago
    • 3 forward/2 ago
    • 3 forward/3 ago
    • 4 forward/2 ago
    • 4 forward/3 ago
    • 6 forward/2 ago
    • 6 forward/2 ago
      The presence of headlights

    • With the headlight
      Type of fuel

    • Petrol
    • Diesel
      Lifting capacity

    • 300 kg.
    • 350 kg.
    • 400 kg.
    • 500 kg.
    • 650 kg.
    • 700 kg.
      The width of processing

    • 103 cm.
    • 105 cm.
    • 110 cm.
    • 113 cm.
    • 120 cm.
    • 61 cm.
    • 65 cm.
    • 66 cm.
    • 68 cm.
    • 70 cm.
    • 71 cm.
    • 73 cm.
    • 75 cm.
    • 80 cm.
    • 81 cm.
    • 83 cm.
    • 85 cm.
    • 86 cm.
    • 88 cm.
    • 89 cm.
    • 90 cm.
    • 95 cm.
    • 96 cm. (960 mm.)
      Class of value

    • Inexpensive
      Technology class

    • Small
    • Heavy
      The depth of processing

    • 18 cm.
    • 20 cm.
    • 22 cm.
    • 25 cm.
    • 30 cm.
    • 32 cm.
    • 33 cm.
    • 36 cm.
      The diameter of the milling cutter

    • 30 cm.
    • 31 cm.
    • 32 cm.
    • 33 cm.
    • 34 cm.
    • 36 cm.
      The presence of pneumo wheels

    • With pneumo wheels
      Appointment

    • For a summer residence
      Unlocking wheels

    • With unlocking wheels
      The area of ​​processing

    • 10,000 square meters.M.
    • 1200 square meters.M.
    • 1500 sq.M.
    • 2000 sq.M.
    • 2500 sq.M.
    • 3000 square meters.M.
    • 4000 square meters.M.
    • 6000 square meters.M.
    • 8000 square meters.M.
      Engine appliance

    • 4 strokes
      Drive unit

    • Chain
      Clutch

    • Belt
      Type of soil

    • For processing virgin lands
      Reverse

    • There is
      The speed of rotation of the cutter

    • 120 rpm.

    You can always ask our managers

    Types of wheels

    First you should figure out what types of wheels for a walk.Behind tractor generally exist. Since the technique is used in many farm processes, the equipment is different. This also applies to pneumatic sea, because the good result and ease of use depends on the correct components. It is important to note that you can not put ordinary road wheels from the Oka, Niva or Moskvich on a walk.Behind tractor. All the options presented below are more and harder. It will be more correct to compare them with kits from ATV, although they do not always have a suitable size.

    • Pneumatic. This option can be put for arable work and to remove roots from the soil. In appearance, these are large wheels, with a diameter of 40 cm and a width of 20 cm. The drawing on the tread should be rude so that the motor carrier works well on the basis. Often this option is in standard configuration and is famous for its wear resistance. Nevertheless, if they became unusable, then you should immediately look for a replacement.
    • Traction. The folk name of these wheels is a Christmas tree. All because of a pronounced pattern on their rubber. This type is also universal and suitable for a ceremonial or standard transport solutions. For example, they are often used by snowball players. Traction tires for a walk.Behind tractor are also distinguished by reliability in everyday life.
    • Solid (most often made of rubber). All.Lit configurations are ideal for rocky soil. They allow the walk.Behind tractor to move faster at such a relief and do not deteriorate after the first use. Of the minuses. They are really very heavy, so to endure them is not so easy. Similar tires are suitable for motoblocks of the MTZ series and diesel technology.
    • Metal. The last variation is suitable for clay soil. The thing is that, unlike previous wheels, these have steel teeth. This, of course, weights equipment, but in soft ground they do their job perfectly. In another way, metal teeth are also called soil.

    As for general recommendations, when choosing what to put up your walk.Behind tractor, pay attention to the front wheel. It is supportive and in the process of use amortizes the entire mechanism. This helps to extend the life and improve the quality of work.

    In general, such a classification of pneumatic ground is used not only for the walk.Behind tract, but also for trailers or other tools from the same category. So she can be safely used, because to maintain the wear resistance of all the equipment in the assortment of the farmer, there should be both a trailer and a walk.Behind tractor.

    Production of a field sprayer

    Homemade sprayer for a walk.Behind tractor is necessary in cases where the area of ​​the processed crops exceeds 20 acres. It is very difficult to manually do such work, it can take all day. The mechanization of this process will save a lot of time and effort.

    For the manufacture of a sprayer, you will need:

    • Welding machine;
    • Bulgarian;
    • Level;
    • Electric drill;
    • Soldering iron for polypropylene pipes;
    • Profile or round water pipes;
    • Plastic or steel barrel with a capacity of 80-100 l;
    • Wide pneumatic wheels;
    • Plastic pipes;
    • Rubber hose;
    • Nozzles or nipples from wheel cameras.

    The assembly of a home.Made sprayer is carried out in the following sequence:

    • Making a frame. Its dimensions are adjusted to the size of the container. The chassis is attached to the frame. For good patency, at least 4 wheels are needed. For lack of wheels, wide skids of aluminum are made.
    • The capacity is installed and fixed on the frame. For this, spacers and screeds are used. Holes are made in the tank for supplying high pressure hoses. The neck of the tank is sealed.
    • The bracket for the pump is made. The model is selected that works from the power shaft (belt transmission) or from electricity (motor block generator).
    • The watering system is assembled. A strong holder from steel profiles is made. With the help of clamps or plastic screeds, plastic pipes join it. The valve is installed for exhausting excess pressure and nozzles.
    • All parts are connected together, the quality of the mounts, the tightness of the joints is checked. The tank is filled with water, the unit is tested in various modes, final adjustment and configuration is performed.

    Do.It.Yourself sprayer will fully justify the invested efforts already in the first season. Thanks to this device, spraying and watering the garden will be carried out quickly and efficiently.