How to Make Out a Stihl Chainsaw 180 Videos

how to easily make out a chainsaw video Video

It happened. Quality disassembly video. How to disassemble a chainsaw. Dismantling the STIHL MS 180 chainsaw. For a long time.

Support the channel. turn off (AdGuard \ AdBlock) ad blocker. Support our channel as much as you can, that’s what you.

Tips for repairing and servicing a chainsaw Thank you for your likes under the video! Subscribe to our channel.

Starter for a Chinese chainsaw 5 pieces Link- http://alipromo.com/cashback/view/oo5fnk43olpahlflnz278v8f50ilvtgt/ Starter 2 pieces Link-http: // a.

how to loosen the clutch on a chainsaw for repair how to loosen the grip on the chainsaw for repair.

On the development of the channel http://www.donationalerts.ru/r/samodelkin_rus.

A fairly common problem in Husqvarna 137 and 142 chainsaws is the breakdown of the oil pump. This video shows a quick.

People who repair Chinese chainsaws for the first time often make mistakes when removing the clutch.

Candles for chainsaws here http://ali.pub/23dl8a On the development of the channel http://www.donationalerts.ru/r/samodelkin_rus.

Having a wrench, loosening many tricky nuts does not cause problems, which I showed not as an example of a nut.

In this video, we will analyze and assemble the CHAINSAW Partner. We will quickly replace the piston on the Partner and clarify.

http://fajno.in.ua/g6383910-zapchasti-benzopilam Do-it-yourself chainsaw repair. replacing the manual starter spring.

Leading chain saw chain: how to change it on Chinese chainsaws, as well as on Shihl, Husqvarna, Oregon. Two methods.

On this Champion saw, we eliminated the backlash of the leading sprocket and changed the leading star. The cause of the breakage is the chain…

SUBSCRIBE to the channel: https://www.youtube.com/channel/UCYBQX5vNScUEeVammZdDYSQ.

He removed the clutch, replaced the drive sprocket and checked the oil pump on the Chinese miracle Stihl ms 660. Look so.

They brought a chainsaw for repair, and assured that it skidded from the very beginning and immediately, it was supposed, a hundred oil.

Chainsaw flywheel, how to change it, repair it, replace the dog (starter response), etc. Showing.

How to change the asterisk on a chainsaw yourself.

Fake stickers that point to the Stihl brand are often misleading. Sometimes on the case.

how to make out a chainsaw video Video

Tips for repairing and servicing a chainsaw Thank you for your likes under the video! Subscribe to our channel.

Dismantling the Chinese (gypsy) chainsaw. Slowly disassemble the chainsaw.

Support the channel. turn off (AdGuard \ AdBlock) ad blocker. Support our channel as much as you can, that’s what you.

Join a group in contact, share experiences, ask questions. https://vk.com/remontinstrumenta74.

It happened. Quality disassembly video. How to disassemble a chainsaw. Dismantling the STIHL MS 180 chainsaw. For a long time.

The video discusses a detailed replacement of the piston group of a chainsaw, How to do it right, in stages and without.

how to loosen the clutch on a chainsaw for repair how to loosen the grip on the chainsaw for repair.

On the development of the channel http://www.donationalerts.ru/r/samodelkin_rus.

Find out more on our website: http://pila.prom.ua Let’s be friends in the social. networks: http://vk.com/maks.bond007 # service Stihl # repair.

A fairly common problem in Husqvarna 137 and 142 chainsaws is the breakdown of the oil pump. This video shows a quick.

In this video we will show you how to replace a piston group on a Stihl MS180 chainsaw, crankshaft oil seals.

In this video I will tell you how to properly disassemble the STIHL MS 180 chainsaw.

In the video, I will show how to properly disassemble a chainsaw Friendship so as not to damage parts, especially the flywheel.

Spare parts for Chinese chainsaws http://benzomaster.pp.ua/catalog/group/215012 Tire length: 45 cm Chain pitch: 0.325 inches Power.

Dismantling a chainsaw: a technological process (video)

Dismantling a chainsaw is a very crucial moment, which comes sooner or later among the owners of such a tool. Owners of chainsaws have to carry out maintenance on their own. How to disassemble a chainsaw quickly and accurately?

Regular maintenance of the chainsaw will make working with it comfortable and safe.

In order for the chainsaw to work flawlessly, it is necessary to regularly carry out maintenance, consisting of several operations:

  • Change of oil;
  • topping up fuel;
  • chain tension setting;
  • cleaning from dirt under the cover;
  • inspection and repair of the chain brake;
  • cleaning the oil supply system;
  • tire cleaning;
  • cleaning or replacing the filter.

Scheme of the Stihl chainsaw.

The time is coming and all these operations must be completed. Therefore, you need to learn how to quickly and correctly disassemble chainsaws.

The Stihl chainsaw has long been loved by lumberjacks due to its low cost. It can be seen in the hands of summer residents, and city services do not refuse such a chainsaw.

However, among the many positive qualities of this model, there is one serious drawback. A chainsaw breaks very often. over, not every malfunction will be eliminated in accordance with the warranty. I have to do the repair myself.

For such work, you must have:

The technological process of repairing chainsaws "Stihl"

When disassembling and repairing a chainsaw, a certain sequence must be observed.

First, the cause of the malfunction is determined. Most often occurs:

  • open circuit;
  • lack of launch;
  • the saw itself turns off;
  • oil leaks;
  • full power does not develop.

In the event of a malfunction, it is necessary to remove the gas tank cap and ensure uninterrupted fuel supply.

If the chain is broken, it just needs to be replaced with a new one. A particular problem in such work should not arise. Repairing other malfunctions will take several hours.

If the saw does not start, make sure that there is fuel. To do this, remove the gas tank cap. If there is enough fuel, a breather may have clogged, which equalizes pressure when fuel is consumed. The breather can be cleaned with a needle. The candles are turned out with a special wrench. They must be cleaned with an emery cloth. The combustion chamber must be ventilated. A chainsaw should start.

READ  Chainsaw Champion Won'T Start

Automatic shutdown of the chainsaw indicates a malfunction of the trigger. However, this is not always the case. It may work fine. Have to turn out all the candles and conduct a thorough inspection. If fuel gets on a candle, then the carburetor is clogged. It must be removed and cleaned. The carbon deposit that appears on a candle indicates improper carburetor adjustment or poor fuel. The twisted out candle is checked for operability, the gap is measured. It is best to replace poorly working candles immediately with new ones. In addition, the air filter must be clean and free of air.

At the next stage, it is necessary to disassemble the cylinder-piston group of the chainsaw motor. The design of the Stihl chainsaw engine is similar to the scooter engine. He understands very simply. It is necessary to unscrew the four bolts securing the cylinder head. Then the cylinder is carefully removed from the block. The piston should have a perfect look. If scoring is detected, it must be replaced. Cylinder repair is performed by boring in accordance with the repair size. Sometimes the cylinder changes with the piston.

The Stihl chainsaw engine is similar to a scooter engine and is easy to disassemble.

After removing the piston, carefully inspect the condition of the rings. The rings should be tight, but they should sit on the piston freely. Then the piston must be inserted into the cylinder and try to swing it, leaning on the top point. When the piston is chatter, you can safely talk about its wear. Due to such a malfunction, the chainsaw is not able to work at full strength.

If oil leakage is detected, check the hose connections and their tightness. To replace the hose, it is necessary to disassemble the entire chainsaw.

The main problems with chainsaws are:

  • ignition;
  • fuel mixture supply;
  • piston operation;
  • cylinder work;
  • exhaust;
  • chain brake;
  • lubricant supply;
  • clutch;
  • the tire.

Back to the table of contents

Engine repair, ignition

Damage occurs quite often. Disassembly and repair require a lot of time and certain knowledge. Most often, engine repair is required when:

  1. There is no start or it just stalls.
  2. Erratic work.
  3. There is no full power, the engine begins to stall at load.

Most engine problems are caused by a malfunction in the ignition system. Therefore, first you need to make sure that the candle is working. Studying her condition, we can say how well the fuel system works. To do this, turn out the candle with a special wrench, after disconnecting the wire.

If the candle is completely dry, then the problem of breakage is not related to the ignition system. Perhaps the fuel mixture just doesn’t get into the cylinder. The candle can be screwed back and begin to repair the engine fuel supply system.

When gasoline is detected on a candle, it means that candles are being filled. One of the reasons is incorrect carburetor adjustment or a violation of the basics of starting. To repair the candle must be cleaned and dried. To drain the cylinder, shut off the fuel supply. To ventilate the combustion chamber, a starter is started. After a few minutes, you can screw in the candle and repeat the start. If a black deposit is found on the candle, it means that the fuel system is out of order.

Failure to receive fuel has a number of reasons:

  1. The breather hole clogged, so a vacuum occurs in the tank that prevents the fuel from entering the cylinder.
  2. The fuel filter is clogged.
  3. The carburetor broke.

To determine the cause, you just need to remove the fuel hose, make sure that the flow of fuel occurs unhindered.

If the feed is very weak, it means that the breather is clogged, which can be cleaned with a needle.

The fuel filter is removed after the gasoline is drained from the tank through the filler hole. It is hooked with a wire hook together with a hose. The connecting clamps are unscrewed. The filter needs to be cleaned or a new one installed. It is advisable to change it once a quarter.

Back to the table of contents

Chainsaw disassembly sequence

  1. The clutch cover is removed.
  2. The starter cover is removed, for this, the screws are unscrewed and the transverse handle is removed, all wires are disconnected; to remove the top cover, unscrew the mounting bolts.
  3. To remove the handle, the cover that covers the air filter is removed, the nuts of the support are unscrewed from above and from below.
  4. To remove the filter, you need to unscrew the screws that secure the housing.
  5. The carburetor fitting is freed from the gas hose.
  6. The saw body is disassembled, for this, screws are unscrewed, the oil tank cap is removed.
  7. To remove the ignition module, it is necessary to dismantle the clutch drum: turn the crankshaft in a clockwise direction until the piston, when moving upward, closes the hole through which the gas is released.
  8. The clutch is released and the flywheel is removed, it is easily removed if it is lightly hit with a hammer.
  9. The screws are loosened, the gas tank is removed along with the oil hose, it is removed by loosening the clamps on the oil supply fitting.

Video: How to Make Out a Stihl Chainsaw 180 Videos


Then the oil tank, pump and carburetor are removed. At the final stage, the chain tension adjustment screw is removed, the engine is halved. Everything is simple, the main thing is the desire to understand.

How to disassemble and assemble a chainsaw

The low level of technical equipment of many service departments and the high cost of their services force many owners of faulty chainsaw equipment to repair their gadgets themselves. How to disassemble a chainsaw, replace defective parts, and also correctly assemble a chainsaw with minimal time and money?

Self-disassembling a chainsaw involves the availability of spare parts, the appropriate tool and locksmith skills. It is possible that the dismantling of individual parts will require special pullers, the manufacture of which will take more time than the repair itself.

In a number of modern models of household and semi-professional chainsaws, special keys that are not included in the supplied kit are used to adjust the carburetor and dismantle the drive chain sprocket.

Self Repair Issues

The problem in many cases is complicated by the lack of complete information on repair technology. According to foreign manufacturers, after the resource has been depleted, the saw should be written off as a waste, therefore the maintainability of many budget-level models raises reasonable doubts.

READ  Stihl 180 Chainsaw Working Principles

It is more difficult to restore professional-grade chainsaws.

  • The problem is complicated by the high cost of spare parts.
  • It is possible that to restore the operability of individual components and mechanisms, in particular, special equipment will be required to set up fuel equipment.

Replacing expensive branded parts with affordable, but short-lived Chinese counterparts does not justify itself economically. Practice shows that these components produce a resource at best by 50-60%.

Fault Detection Algorithm

The cause of the failure of the saw or the deterioration of its performance may be:

  • clogged fuel tank cap breather;
  • air intake by carburetor due to destruction of the gasket or loosening of threaded fasteners;
  • mechanical jamming of removable saw equipment and other minor defects.

Before starting disassembly, make sure that more extensive repairs are needed.

It is most likely that it will not be possible to independently assemble a new chainsaw after repair with the original quality. In the design of modern chainsaws, press fitings of mating parts, which have minimal maintainability, are often used.

Even partial analysis of the chainsaw with a tool at hand can lead to undesirable consequences. In most cases, to eliminate the malfunction, you can limit yourself to dismantling a single unit or system.

This list includes:

  • connecting rod and piston group;
  • carburetor;
  • clutch mechanism;
  • chain sprocket.

Tips for dismantling different components and systems

In the scope of this article, only general recommendations can be given, since chainsaws from different manufacturers can have significant technical differences.

Before disassembling the faulty tool, it is necessary to dismantle the saw set, drain the fuel and oil from the filling tanks, and clean the hard-to-reach places of the chainsaw from surface contamination.

Fuel system

Disassembling the carburetor requires special attention. This unit consists of many small parts, so the removed parts in a given sequence are stacked on a blank sheet of paper. After flushing all components, the carburetor is assembled in the reverse order.

Compression recovery

Less complicated piston repair. To dismantle the cylinder, it is enough to remove the threaded fasteners, lay the saw on its side to prevent the pieces of the destroyed compression ring, piston skirt or other foreign objects from getting into the engine crankcase.

The cylinder mirror wears out unevenly, so installing a new piston does not give a significant effect. As a rule, during overhaul, after checking the suitability of the crankshaft, a complete set consisting of a cylinder, a compression ring piston and a piston pin is installed.

Launcher Repair

Disassembling the starter to replace the cord for an experienced user does not create problems, but the plastic case in most cases cannot be repaired. The Chinese chainsaw assortment for the most part is a copy of the most popular European models, so we disassemble the Chinese chainsaw according to the standard scheme.

Worn parts of the saw set are not restored.

Finishing work

In a number of models, engine controls, start locks and an emergency stop system are displayed on the handles, to the place where the operator’s hand is grabbed. It is recommended to assemble the chainsaw handle after preliminary cleaning of the contacts of all electrical and mechanical communications.

Self-assembly of a chainsaw is part of the repair work that requires special attention. The success of the final result is facilitated by the correct sequence of operations, a sufficiently high quality of parts, gaskets and other consumables.

how to make out a chainsaw video

Carburetor Stihl, how to remove, disassemble, clean.

Look Tool 10 months ago

In this video we will take a closer look at the fuel system of the Stihl 180 chainsaw. I’ll tell you how to.

How to disassemble a chainsaw. Dismantling the STIHL chainsaw.

The same service 10 months ago

It happened. Quality disassembly video. How to disassemble a chainsaw. Dismantling the chainsaw ST.

Husqvarna 135 chainsaw repair. Dismantling the chainsaw.

Straight Arms 10 months ago

This video is about how to properly disassemble the Husqvarna 135 chainsaw into the main components. Sooner or.

Fuel filter. Carburetor disassembly and repair

Cottage TV 10 months ago

How to Make Out a Stihl Chainsaw 180 Videos

How to disassemble a Makita chainsaw for diagnosis and DIY repair. The chainsaw has become the main.

How to remove the clutch and pinion from a chainsaw C.

Garageman 1 year ago

Chainsaw CARVER RSG 38-16K.

How to disassemble a chainsaw Friendship.

PRO100 Sanya 1 year ago

Zdarova people today I will tell you how to disassemble a friendship saw correctly. Offer your.

How to disassemble a Partner chainsaw. disassembling a chain.

kosi kosa 1 year ago

Link to article: Partner Chainsaw Spare Parts:.

How to disassemble a Husqvarna chainsaw. disassembling a chain.

kosi kosa 1 year ago

Article: Buy Husqvarna Chainsaw Parts:.

Dismantling a Stihl chainsaw. how to disassemble a Stihl saw.

kosi kosa 1 year ago

Link to the article: Buy a chainsaw:.

repair of a Chinese chainsaw how to disassemble.

MASTER OK 1 year ago

How to disassemble a STIHL MS 180 chainsaw (Stihl ms 180.

Dmitry Benzomaster 1 year ago

How to remove the clutch of a chainsaw.

DIY repair 1 year ago

Support the channel. turn off (AdGuard \ AdBlock) ad blocker. Support our channel.

Complete disassembly and assembly of the chainsaw or how to disassemble.

Kosy Kosa 2 years ago

How to disassemble the crankcase and remove the crankshaft on a chainsaw.

Roman Hare 2 years ago

Find out more on our website: Let’s be friends in the social. Networks: # Service Stihl # Repair.

Friendship 4 chainsaw, engine repair. (Proper p.

Smart city 2 years ago

In the video I will show how to properly disassemble the Friendship 4 chainsaw so as not to damage the spare parts.

How to remove bearings from the crankshaft on the STIHL MS 180.

klusik1 2 years ago

In this video I will show how to remove ball bearings from a crankshaft to a gasoline in a domestic environment.

Chainsaw Friendship. proper disassembly and nuances.

TomRaily 2 years ago

In the video, I will show how to properly disassemble a chainsaw Friendship so as not to damage spare parts,…

How to disassemble a chainsaw how to remove plastic How to d.

Everything and everything 3 years ago

How to remove plastic on a chainsaw, how to disassemble a chainsaw quickly.

Dismantling the Chinese chainsaw.

VillageRu 3 years ago

Dismantling the Chinese (gypsy) chainsaw. Slowly disassemble the chainsaw.

Dismantling And Assembling Chainsaws. NZIZN.RU

Dismantling and assembling a chainsaw do it yourself

The low level of technical equipment of many service departments and the highest price of their services force many owners of faulty chainsaw equipment to repair their devices without the help of others. How to disassemble a chainsaw, change faulty parts, is it also true to assemble a chainsaw with the least expenditure of time and money?

READ  How Does A Chainsaw Carburetor Work

Self-disassembling a chainsaw implies the presence of spare parts, corresponding tool and locksmith abilities. It is possible that the removal of individual parts will require special pullers, the manufacture of which will take more time than the repair itself.

In a number of modern models of household and semi-professional chainsaws, special keys that are not included in the attached set are used to adjust the carburetor and dismantle the drive chain sprocket.

Self Repair Issues

The problem in almost all cases is complicated by the lack of real information on repair technology. According to foreign producers, after the resource has been exhausted, the saw should be written off as a scrap, because the maintainability of many economical models raises reasonable doubts.

It is more difficult to restore professional chainsaws.

  • The problem is complicated by the highest cost of spare parts.
  • It is possible that to restore the operability of individual components and mechanisms, in particular, special equipment will be required to set up fuel equipment.

Replacing expensive branded parts with affordable, but short-lived Chinese counterparts does not justify itself economically. Practice shows that these components produce a resource at best by 50-60%.

Fault Detection Algorithm

The cause of the failure of the saw or the deterioration of its performance may be:

  • clogged fuel tank cap breather;
  • air intake by carburetor due to destruction of the gasket or loosening of threaded fasteners;
  • mechanical jamming of removable saw equipment and other minor defects.

Before starting disassembly, make sure that more extensive repairs are needed.

Repair Chinese chainsaws assembly or proper packaging Part 3

Disassembly Chinese (gypsy) chainsaws. Slowly disassemble chainsaw.

Disassembly chinese chainsaw

2-part of the course. What you need to know about chainsaws, before using them. Join us on social networks.

It is most likely that it will not be possible to independently assemble a new chainsaw after repair with the original quality. In the design of modern chainsaws, press fitings of mating parts, which have minimal maintainability, are often used.

Even partial analysis of the chainsaw with a tool at hand can lead to undesirable consequences. IN most cases, to eliminate the malfunction, you can limit yourself to dismantling a single unit or system.

This list includes:

  • connecting rod and piston group;
  • carburetor;
  • clutch mechanism;
  • chain sprocket.

Tips for dismantling different components and systems

In the scope of this article, only general recommendations can be given, since chainsaws from different manufacturers can have significant technical differences.

Before disassembling the faulty tool, it is necessary to dismantle the saw set, drain the fuel and oil from the filling tanks, and clean the hard-to-reach places of the chainsaw from surface contamination.

Fuel system

Requires special attention disassembly carburetor. This unit consists of many small parts, so the removed parts in a given sequence are stacked on a blank sheet of paper. After flushing all components, the carburetor is assembled in the reverse order.

Compression recovery

Less complicated piston repair. To dismantle the cylinder, it is enough to remove the threaded fasteners, lay the saw on its side to prevent the pieces of the destroyed compression ring, piston skirt or other foreign objects from getting into the engine crankcase.

The cylinder mirror wears out unevenly, so installing a new piston does not give a significant effect. As a rule, during overhaul, after checking the suitability of the crankshaft, a complete set consisting of a cylinder, a compression ring piston and a piston pin is installed.

Launcher Repair

Disassembling the starter to replace the cord for an experienced user does not create problems, but the plastic case in most cases, can not be repaired. The Chinese chainsaw assortment for the most part is a copy of the most popular European models, so we disassemble the Chinese chainsaw according to the standard scheme.

Worn parts of the saw set are not restored.

  • At home, you can shorten the new chain for installation on a shorter bus.
  • The resource of branded component tires is equal to the resources of three saw chains.
  • This indicator can be significantly reduced by incorrect choice of chain pitch or by large wear of the crown of the drive sprocket.

Finishing work

In a number of models, engine controls, start locks and an emergency stop system are displayed on the handles, to the place where the operator’s hand is grabbed. It is recommended to assemble the chainsaw handle after preliminary cleaning of the contacts of all electrical and mechanical communications.

Self assembly chainsaws are a part of repair work that requires special attention. The success of the final result is facilitated by the correct sequence of operations, a sufficiently high quality of parts, gaskets and other consumables.

how to disassemble a Stihl ms 180 chainsaw Best video watch online

It happened. Quality disassembly video. How to disassemble a chainsaw. Dismantling the STIHL MS 180 chainsaw. For a long time.

In this video we will show you how to replace a piston group on a Stihl MS180 chainsaw, crankshaft oil seals.

In this video I will tell you how to properly disassemble the STIHL MS 180 chainsaw.

VK Group: https://vk.com/vilisovivan. Assembly and review of parts of the Stihl MS 180 chainsaw.

A fragment from the repair of a STIHL MS 180 chainsaw. The full form is here: https://www.youtube.com/watch?v=jXkAl49PO5A Find out more on our website.

Replacing the piston and carburetor with the STIHL Stihl MS 180. Find out more on our website: http://pila.prom.ua Subscribe to our.

How to repair a carburetor on a Stihl ms 180 chainsaw.

stihl, shtil, MS180, Stihl, chainsaw / launch chainsaw Stihl 180 video.

In this video I will show how to remove ball bearings from the crankshaft on a STIHL MS 180 chainsaw in a domestic environment.

Spare parts Stihl 180 https://goo.gl/3nTzbZ Self-repair of the stihl ms 180 chainsaw. The chainsaw chain is not lubricated. Well.

In this video we will take a closer look at the fuel system of the Stihl 180 chainsaw. I’ll tell you as much as possible.

repair cleaning carburetor stihl 180.

It often happens that the chainsaw does not start, stalls, does not develop speed. Repair can be done with your own hands.

Dismantling the Stihl STIHL MS 180 chainsaw. Removing the flywheel, ignition module and clutch. #chainsaw repair.