How to mix gasoline for a chainsaw

Butter

According to the international classification, oils of the following markings are used for chainsaws:

  • Use oil for 2-stroke engines only;
  • Do not use the material after the expiration date;
  • It is strictly forbidden to add working off (it contains many unnecessary impurities. harmful to the central mechanism of the chainsaw);
  • You can not use chain lubricant (for each device: chain and engine. it is its own);
  • It is preferable to use synthetics or semi-synthetics (during development, it almost does not form combustion products, but the price of such material is higher than that of mineral oils).

Chainsaw refueling instructions

Knowing the ratio of the preparation of the petrol-oil mixture, you can start refueling it. The refueling instruction is as follows:

  • First you need to prepare the mixture. Having combined the two main components, you should mix them thoroughly.
  • Place the tool on a clean and level surface. Before unscrewing the gas tank cap, it is necessary to clean or blow off sawdust, dust and dirt.
  • The filler neck must point upwards
  • Install a small watering can in the neck, then pour fuel
  • Control the refueling process, as the volume of the tank is small, so it fills up quickly
  • Do not fill up to the full maximum, since when the tank cap is closed, the remaining fuel will splash out.
  • After the fuel is poured into the tank, immediately add chain lubricant.
  • Fuel consumption and chain lubrication are approximately the same, therefore both tanks must be filled at the same time.
  • After refueling, you can start starting the engine

It is better to start the engine not in the place where the refueling was carried out, but to move to a distance of 2-3 m. The tool is ready for work, and you can start to start it. How the chainsaw engine starts, you can read in this material (link).

Proportions

There are several options for the ratio of fuel and lubricant. As a rule, this number ranges from 20 to 50 ml of oil per 1 liter of gasoline.

Again, you must follow the instructions for the product or the recommendations indicated on the oil label (priority of the instruction). In the absence of such, before diluting gasoline, you need to pay attention to the power indicator of the product, since the created proportion directly depends on it.

For chainsaws with power:

  • Up to 1.5 kW, the recommended ratio is 25 ml of oil per 1 liter of gasoline;
  • Above 1.5kw 20ml / l.

In gasoline for a chainsaw, it is allowed to add oil a little more than the recommended proportions (up to 5 ml per 1 liter). In this case, you should be extremely careful, because non-observance of the proportions can lead to breakdown, and as a result, expensive repairs.

If gasoline is diluted with a large volume of oil, then during operation the number of shock loads on the cylinder-piston system will be increased, and carbon deposits may also form, as a result of which the CHP will fail.

The addition of a small amount of oil to gasoline for a chainsaw can lead to insufficient lubrication of the surfaces of moving elements, which will lead to additional friction of the elements and their heating, followed by the destruction of the entire mechanism.

Why is gasoline mixed with oil for refueling chainsaws

It is necessary to dilute gasoline with oil in order to avoid the failure of the internal combustion engine. The reason for this is the design features of the lubrication system for two-stroke motors. In the design of such engines there is no chamber for filling engine oil, and if you fill in fuel without lubricant, then the crankshaft, piston, bearings and connecting rods will not receive lubrication. This will significantly reduce the service life of all the listed parts, therefore, it is prohibited to fill in clean fuel.

gasoline, chainsaw

Gasoline and oil for the chainsaw must be poured in the appropriate proportions, which makes it possible to effectively lubricate the rubbing parts. Lack of lubricant or its excess will lead to negative consequences in the form of carbon deposits. In order for the tool to work properly, from the first day of operation of the tool, it is necessary to fill it not only with high-quality materials, but also observe the correct proportions.

For the engine to work properly, the main thing is to fill it with clean fuel without contamination.

How to mix gasoline with chainsaw oil?

To mix ingredients you need:

  • Use a clean, dry container, measuring cup and graduated bottle.
  • It is necessary to mix in a separate container, and not in the saw’s gas tank.
  • First, pour half of the gasoline, then the oil, shake everything well, add the second part of the gasoline and mix again.

Every tool owner should know how to dilute gasoline with chainsaw oil. However, the correct proportions are not yet a guarantee of a good mixture. It is important to select quality products so that gasoline and oil are homogeneous fluids and do not contain sediment. It is better to prepare the mixture before starting work. Although, according to the standards, the finished fuel and lubricating fluid can be stored for a month, but its properties deteriorate over time.

Technology

Not only the quality and proportion of fuels and lubricants is important (although it is dominant in this matter), but where and how (how) gasoline is diluted with oil for chainsaws.

The technology provides for the use of containers with graduated marks, some brands (along with chainsaws and oil) produce containers for mixing and storing fuel. Made of a special non-combustible material, they are produced in the form of a canister or bottle, often endowed with measuring lines, and some of them have two entrances (separate for each type of fuel and lubricants).

Often, improvised means are used for mixing:

  • Plastic / glass bottles;
  • Syringe (no needle);
  • Measuring cups;

When using household products, be extremely careful, because during the mixing process, when combustible material interacts with the surface of non-specialized containers, static electricity can be generated. this is fraught with an explosion. When making a mixture, oil is added to gasoline, since it has a higher density.

How to mix gasoline with chainsaw oil

  • March 22, 2019
  • miscellanea
  • Svetlana Pavlova

A variety of brands of chainsaws are purchased by owners of country houses. The miracle technique is indispensable for the preparation of firewood and the construction of outbuildings. Those who have been using this tool for a long time know all the intricacies of its maintenance. But for beginners, you should definitely learn how to dilute gasoline with chainsaw oil. This will be discussed in the article.

Petrol

According to experts, it is necessary to use unleaded fuel with an octane rating exceeding 90. Gasoline A92 and Ai92 is considered ideal. You can use the 95th, but there is an opinion that it is better to refrain from this kind of gasoline, since some of them are made on the basis of the 92nd with the addition of additives. The latter, in turn, are harmless for 4-stroke car engines, but they will be superfluous for the “sensitive” mechanisms of 2-stroke motors.

It is recommended to use fresh gasoline for chainsaws, since when stored in cans the fuel can lose its octane properties.

Chainsaw Mixing Oil

To lubricate the internal parts of a gasoline engine, special oils are used with the following properties:

Using low-quality oil, the owner of the saw can face serious problems, which will result in expensive repairs. How much oil to pour into gasoline for a chainsaw is indicated by the manufacturer on the package. It is imperative to adhere to this dosage, since incorrect proportions negatively affect the service life of the tool.

How to mix gasoline with chainsaw oil?

To mix ingredients you need:

  • Use a clean, dry container, measuring cup and graduated bottle.
  • It is necessary to mix in a separate container, and not in the saw’s gas tank.
  • First, pour in half of the gasoline, then the oil, shake everything well, add the second part of the gasoline and mix again.

Every tool owner should know how to dilute gasoline with chainsaw oil. However, the correct proportions are not yet a guarantee of a good mixture. It is important to select quality products so that gasoline and oil are homogeneous fluids and do not contain sediment. It is better to prepare the mixture before starting work. Although, according to the standards, the finished fuel and lubricating fluid can be stored for a month, but its properties deteriorate over time.

Step by step instructions for refueling

If you want to refuel your chainsaw, you need to follow a simple algorithm:

The article describes in detail how to dilute gasoline with chainsaw oil. When preparing the mixture, try to strictly observe all the proportions so as not to harm the technique. Do not forget to add 20% more oil than indicated in the instructions when running in a new tool and in hot weather.

How to Mix Fuel for a Husqvarna Two Stroke Engine Chainsaw

What chain oil to use?

The oil for lubricating the chain is recommended by the manufacturer and indicates it in the tool passport. These are usually branded products of high quality. While the chainsaw is new, it is necessary to use it. Otherwise, if the tool breaks down, it is removed from the warranty and repairs are made at the expense of the user. Subsequently, the oil is replaced with a cheaper one, but it must meet the following requirements:

Chainsaw Basics: Fuel and Oil

  • protect the chain from corrosion;
  • increase wear resistance by reducing friction;
  • do not form carbon deposits;
  • maintain the ability to work with the tool in a wide temperature range.

For long-term operation of the chainsaw in good working order, it is better not to save on chain oil.

Gasoline with chainsaw oil. how to dilute and why it is done

Chainsaws of different companies are based on a two-stroke internal combustion engine that drives the cutting headset of the tool. To drive the internal combustion engine, the proportions of gasoline with chainsaw oil are used. Combining gasoline with oil is a mandatory procedure, so if you just bought a tool, then you need to understand the peculiarities of refueling it.

Gasoline to chainsaw oil ratio

The proportions of oil and gasoline for refueling two-stroke engines of chainsaws of different brands is 40 to 1 or 50 to 1. This ratio is standard, which is used not only by beginners, but also by experienced sawers. It is this ratio for the preparation of the fuel mixture that is close to ideal, and provides lubrication of the rubbing parts of the crank mechanism and the piston.

Correct Way To Mix Gas and Oil For a ChainSaw, WeedEater etc. Video

How much oil should be poured into gasoline in milliliters? Calculated per ml, the proportion of oil and gasoline 1 to 50 is 20 ml per 1 liter. To prepare the correct mixture, fill 1 liter of gasoline in a plastic bottle and dilute it with 20 ml of oil. To correctly measure how much oil to pour, you should take a special measuring container and fill it up to the appropriate mark. If you plan to immediately prepare 2 liters of fuel, then 40 ml of lubricant must be added to this amount of gasoline.

There are other ratios that different manufacturers offer. These values ​​of the ratios differ insignificantly, but if you have subtracted other values ​​in the instrument’s passport, then you need to adhere to them. A value of 1 in 50 or 40 is standardized. Pour 15 ml of oil into 1 liter of fuel in the summer, and in winter, add at least 20-25 ml. Knowing the recipe for preparing the mixture, you should also figure out what kind of gasoline to pour into the chainsaw?