How to Nail a Square on Nails

September 21, 2017.

How to Nail a Square on Nails

Nail files play an important role for both edged and unedged manicure at home. The health and impeccable appearance of the nail plates depend on the choice of files suitable for sawing nails and mastering the technique of their processing. If a metal file is suitable for processing extended nails, then natural nail plates can be seriously damaged with such a tool. It is important to know how to file nails properly with a suitable file to give the free edge an oval, almond-shaped, square or round shape.

For working with natural nails, glass, ceramic and so-called laser nail files are most suitable. Performing a manicure with any of these tools does not cause delamination and brittleness of the nail plates.

But before you file the nails on your hands and give them the desired shape, be sure to check the abrasiveness of the tool so that you do not have to redo the manicure and reduce the length of the nails. The abrasiveness (stiffness) of the files is measured in grit and for home manicure it is advisable to equip the individual set with 4-5 tools with different degrees of rigidity. 180-240 grit abrasive files are suitable for sawing up the free edge, 250-500 grit for grinding the surface, 600-800 grit for removing gloss from the plates before gel polish application, and choose 900-100 grit buff for polishing and polishing the nails. grit.

HOW TO PROPERLY SAW NAILS ON HANDS

❶ Wash your hands thoroughly with soap and water, then wipe dry with a clean towel;

READ  How Much Does The Battery Of A 12 Volt Screwdriver Charge

❷ Now choose the right nail file to give the nails the desired shape. To make the edges of the nails smooth and even, take a tool with an abrasiveness of 240-400 grit;

❸ Decide what shape we want to give the nails. Focus on the appearance and length of natural plates. Today, the trend is oval, almond-shaped and square with rounded edges of the shape of the nails;

❹ To make it more convenient for you to give your nails the desired shape, cut off the tip and sides of the free edge using nippers with high-quality sharpening. If you make the shape of almonds, then cut the sides of the edge more, and if the oval. less;

❺ Keep the nail file parallel to the side of the nail being processed, move in one direction, away from you (from the edge to the center). If you move back and forth, the nails will begin to exfoliate after the procedure;

❻ File the tip of the nail while moving the tool towards yourself. Press the nail file firmly to the nail while sawing and hold it perpendicular to the top of the plate. If you keep the file tilted, then sawing over time weakens the structure of the keratin layers of the plate;

Video: How to Nail a Square on Nails


❼ We move the nail file to the other side of the nail and move in one direction, towards ourselves. Gradually change the angle of the file, rounding the free edge;

READ  Stihl 180 Does Not Hold Idle

❽ To remove roughness along the edges of the nail and get rid of small nicks at the end, take a buff and with the working side with a small abrasive move up and down, gradually turning your finger;

❾ We polish the side of the buffik to give the surface of each nail plate a glossy shine so that your fingers look spectacular and without a decorative manicure;

❿ At the end of the procedure, we apply emollient oil on each nail plate, on the cuticle and on the periungual rollers;- in the photo: step-by-step instructions for processing nails with a nail file

FILES FOR HOME MANICURE

Glass.Perhaps the most popular option among our women is their convenience, durability and relatively low cost compared to peers. You can easily pick up a glass nail file suitable for thickness, shape and abrasion to file your nails. Keep the glass file in a separate case and try not to drop the fragile tool on the floor;

Crystal.Designed to care for thin and brittle nails. The working surface of the tool delicately affects the edges of the nail plate and quickly smooths out irregularities;

Ceramic.It is convenient to file short nails with a ceramic file and seal the end face to protect the plates from delamination;

Metal.Very strong, durable and cheap tools. Sawing up the free edge and, moreover, grinding the surface of the plates with a metal file is extremely undesirable, since the structure of keratin layers can be damaged. Such a tool is used for quick processing of artificial and gel-grown nails;

READ  How To Connect A Bosch Gas Water Heater

LaserThese are files with diamond spraying and grooves on the working surface, made by laser engraving. Laser files are quite expensive, but very durable and suitable for gentle processing of fragile and thin nails, and some models are designed to remove cuticles;

Plastic
Budget option, which is made of foam plastic. Suitable for grinding and shaping nails after preparatory filed with a tool with a larger abrasive. Plastic files can be easily cleaned and disinfected with an antiseptic;

Paper.Disposable files with a soft abrasive (Teflon spraying). A very convenient option for nail care during the holidays.

SEVEN IMPORTANT TIPS

· Do not file nails more than once a week, so as not to provoke delamination of the plates;

· When processing a nail with a file, try to perform no more than ten movements (choose the appropriate abrasiveness of the tool);

· During the procedure, the thumb holds the file from below and the rest from above. It is necessary to file nails only in one direction, moving the tool from one edge to another;

· Wipe your fingers dry with a soft towel before the procedure, as the treatment of wet nail plates leads to their delamination;

· Do not file the sides of the nail plate too deep, as cracks may appear on them and bleeding wounds on the side rollers.