How to process a row of potatoes with a walk -behind tractor. Additional recommendations for plowing torture

Landing, weeding, and cumming up potatoes with a motor block. video and photo

This is what hedgehogs look like for processing potatoes for removing weeds, in addition to their direct function, help solve several related problems at once:

  • loosen the soil area near the potato bush;
  • reduce moisture loss;
  • contribute to the better formation of a tuber;
  • Thanks to timely cultivation, potatoes of any variety are less affected by pests and diseases.

In large areas, it is difficult for summer residents and farmers to cost the primitive tools of labor: hoes and rakes. To replace manual guns in the fields are cultivated one.axle tractor and hedgehogs for mechanized weeding potatoes.

Distinguish between two types of hedgehogs. This is a rotational hedgehog (used for weeding, giving a swelling of the soil, like a loot and an enchanter of potato plantings). Hedgehog is good for working on the field both before the emergence of seedlings and in other periods.

Thanks to these functions, potatoes are enveloping quickly, with a minimum of labor. This is the advantages of any type of hedgehog. It is not difficult to buy them today. But there is one significant minus of ready.made devices. they are not cheap. You can reduce the cost of acquiring equipment by constructing a hedgehog with your own hands.

Homemade devices are available, simple and reliable. Their manufacture is possible from improvised materials and those that are sold in any cardhole department of a household store.

Rimbating potatoes with a motor block using a rotational harrow

After the planted potato is fet the field is covered with even rows of high beds, to violate the integrity of which, uprooting the cassock and a grip, I really do not want to. If the earth previously plowed with the help of small garden equipment, then weeding potatoes with a motor block will not cause difficulties. The main task when removing the weed is to pull it out of the ground, which is more convenient to do with loose soil

On large tractors, the soil is crushed with a rotary harrow, a hinged equipment is fastened to the walk.behind tractor, which is popularly called “hedgehog”.

This device looks like weeding potatoes as several different.made rings with teeth or spikes that form a conical shape. Such nozzles are always placed with a couple, having at a slight angle. Some home.mades are based on discs, but this is not very convenient, since the earth is packed between them mixed with torn weeds. This reduced version of the rotational harrow is very simple: a hedgehog slightly immersed in the soil for weeding, turning, loosening the soil and at the same time cling to weeds, throwing them upward. Special cutters for loosening the soil work in a similar way, but they are put on a cultivator for weeding potatoes.

Potato planting methods with a walk.behind

When the site is prepared, you can proceed directly to the planting of potatoes. With the help of a walk.behind tractor, you can plant a culture in different ways:

  • Semi.automated method. A perch is installed on a single tractor, which allows you to form and then sprinkle the furrow with a layer of soil. Sowing potatoes are laid manually.
  • Automated method. All processes are performed by a walk.behind tractor using a special hinged potato.resident.
  • Potato planting with a motor block for a plow.

The choice of the method depends on the equipment included in the basement of the walk.behind tractor, and the area of ​​the processed area. To understand the difference, we will consider in more detail the features of each of these methods.

Potato planting with a walk.behind clock

If the potatoes are planted in a small area, then the cupboard is most often used, which is attached to the walk.behind tractor. The task of this adaptation is to raise the ground, creating a furrow and forming crests on both sides of the passage.

With the help of a walk.behind tractor, grooves are formed for planting potatoes

Distinguish several varieties of cigns:

The first two are very similar in appearance and resemble a knife from two curved wings connected together and divorced from behind. The difference lies in their functional features.

Cligs with a fixed capture width

This cigarette butt is quite primitive and does not allow you to adjust the width of the aisles. It is not very suitable for planting potatoes, t. to. The working capture of such a device is only 20-30 cm. It is more advisable to use it for planting vegetables that do not require a significant distance between rows.

Unregulated perch is more suitable for marking the beds with narrow rows

Cloudberry with adjustable capture width

The second version of the cuculent is the most popular among gardeners. The design of this hinged device allows you to configure the width of the soil capture. Therefore, there is an opportunity to set the desired interval between the rows. However, the adjustable perch also has a number of disadvantages:

  • To use it, you need a more powerful and heavy unoic tractor (with a capacity of at least 4 liters. With. and weighing more than 30 kg).
  • The performance of this equipment is slightly lower, t. to. When working with it, part of the earth with crests can crumble back into the furrow.
  • With an increase in the distance between the dumps, the load on the unoic tractor increases and fuel consumption increases.

Adjustment of the width of the censer capture allows you to change the width of the aisles

Disk perch

This device is more productive compared to previous ones, but also several times higher than their cost. The disk hijacker is a platform with two disks attached to it, which rotate when moving. There is a possibility of adjusting the space between the disks and the angle of their inclination. Among the advantages of such a cigarette, the following should be distinguished:

  • It is less energy.consuming and more convenient when working;
  • creates more even and high crests;
  • Disks spin while moving, chopping and loosening the soil at the same time.

It is recommended to use a disk hill run with units with at least two gears for moving forward. Movement at the lowest speed provides the optimal degree of use of the motor block.

Experienced farmers consider the disk hijacker for the walk.behind tractor the most effective.

You can improve the performance of the cigarette light, exposing the angle of rotation and the width between the disks

Regardless of the type of perch, the planting of potatoes is carried out as follows:

  • A hinged device is attached to the one.axine tractor and the minimum soil width is tuned, the unit is equipped with low.bearing wheels.
  • With the help of a motor block, furrows are formed.
  • Seven potatoes are laid in the resulting rows at the same distance.
  • The wheelchass wheels are replaced by ordinary rubber, the width of the censer wings changes to the maximum.
  • Grows with potatoes stacked in them are covered with earth with a walk.behind tractor.

Thus, when planting using the cigarette light, you need to make at least two passes by a walk.behind tractor along the site. You will need an assistant to lay planting material in the ground.

process, potatoes, walk, tractor

Potato planting with a motor block with a hinged potato.adversary

If the area of ​​the landing site is significant, then a hinged potato tape can be used. In the standard form, it consists of the following elements:

  • the furrow partition forming a groove in the ground;
  • bunker in which potatoes are laid for planting;
  • mechanism of laying tubers;
  • disk cunning for the subsequent backfill of the furrow.

The parameters of a hinged potato.resident can be different, they are selected for a specific model of a walk.behind tractor

Potato.resident allows you to perform the entire process of planting potatoes in just one pass. Thus, there is a significant saving of time, fuel and effort. Before using this device, it is necessary to adjust the parameters:

Potato.resident. the device is quite expensive and, as a rule, the ordinary summer resident simply does not afford. It is most often used in farms.

Simple landing for a plow

If there is no way to purchase the described devices, you can use the so.called summer option of planting potatoes. a motor block for a plow. This method is as follows:

  • Soil.spaces and plow with milling cutters are installed on the one.axine tractor.
  • A furrow is formed, where potatoes are immediately laid.
  • When turning, the unit forms a new ridge, while falling asleep the previous.

Potato planting technology using a walk.behind tractor

The landing scheme largely depends on the model of the walk.behind tractor and the variety of potatoes itself. It is recommended to adhere to the following criteria:

It is important to ensure that the furrows are even, and the distance between the rows of the same. This will facilitate subsequent work on the site, especially if the same.based tractor will also be used in the future.

For convenience, you can mark the site with ropes stretched at the required distance, or use a home.made marker for marking.

With the help of a marker, you can mark the rows for planting potatoes

It is desirable that the soil before landing is a little wet. Processing of dry and solid ground will require additional physical efforts and lead to the overspending of fuel, and in the mud of the walk.behind wheel, they simply get stuck.

Technology

Tips for proper planting by motoblocks Profi, Viking, Crosser, Patriot, Caiman:

  • The width of the aisles when planting potatoes should be from 55 to 65 centimeters with a motor block.
  • Furrows must be made even, this will simplify root crop care.
  • Before planting, you can fertilize the soil.
  • Distance between tubers 25-30 cm.

Potato planting depth for one-axine tractor 10-12 cm.

The distance between the rows when planting potatoes by the walk.behind tractor do the same. Follow the width of the rut, it should be uniform. When cutting the furrows, try to make them even. If necessary, pull the ropes to navigate them.

Consider the main methods of landing: with the help of a cigarette light, a hinged element. potato.resident, landing for a plow, landing in a crest.

Landing with a cigarette light

For planting with a cigarette light, wheels with primerial elements are placed on a motor.cultivator. The motor.cultivator Tarpan is well suited. Cutting the grooves is carried out. Potatoes will have to be planted manually. After planting, change the soil for standard rubber wheels.

Wheel rearrangement is needed in order not to injure the seeding material. The width of the ruts is left the same-55-65 centimeters, and again walk along the furrows. The same.based tractor will fill the row with the earth and compact the seeding material.

Planting with a cigarette light. a less expensive option. The configuration of the unit should only have metal and rubber wheels, and the perch itself. Inconvenience lies in manual landing of potatoes. With large sowing areas, a hinged steak for a walk.behind tractor is used.

This method is considered the least laborious. The unit includes:

  • Conveyor. a kind of conveyor that supplies crop material.
  • Borozdodel for laying a furrow.
  • Distributor, to serve potatoes at certain intervals of time.
  • Disk hill laying and falling asleep.

We work as a potato.adversary

Thanks to the planting of potatoes for a motorbridge, you can save three times more time than when planting with a cigarette butt. The process is fully mechanized. Potatoes are simultaneously planted and enveloped. Potato.resident has its disadvantages.

First, sowing material should be selected more carefully. Tubers should be the same in size. Young shoots are not very long. Otherwise, when landing, the seed is injured. Secondly, this method of landing is more expensive.

Together with the steambox, you can use a special device for simultaneously introducing fertilizers to the hole, along with sowing material.

We plant a plow

On the one.axine tractor, you need to install the ground.bearing wheels and the plow. The soil is prepared by loosening, using a milling cutter. The landing plow is inserted into the soil to the depth of the bayonet of the shovel.

process, potatoes, walk, tractor

efficiently landing two people. The first controls the motor unit, and the second puts potatoes in the furrow. The work is performed promptly. At the first passage of a row, seed material is laid. And during the reverse passage, the sown groove is filled with earth from the newly plowed.

Planting in the crests

Potato planting in the crests of a walk.behind tractor is practiced in areas where groundwater is located very close to the surface. To do this, a motornote should form combs, 15. 20 cm high. Tubers are planted in a crest. This option is acceptable only for well.moistened soils.

A selection of video

Planting potatoes using a walk.behind tractor greatly simplifies work, greatly reduces the costs of physical labor. Additional devices. potato.resident, mechanism for hilling. are very useful and necessary if the potatoes are planted on a large area. But is it too often puts the tubers of potato.resident? And the depth of the furrow must be adjusted. And then how the potato will germinate? And hilling is not of such quality as manual. There is nothing to be done. the area is large, you can’t do without the unit shown! Disk perch in general is not bad. With a new furrow, the previous one falls asleep. I think the shown single tractor is popular in rural areas.

The same.based tractor greatly facilitates the work in personal plots, we sit potatoes in our garden under the plow, it turns out very quickly and well.

Constantly planted potatoes manually under a shovel, and how much easier it is to work with equipment. Now we sit in a comb with the help of a disk cunning. The crests warm up faster, the shoots appear earlier, and it is easier to hill in the future. In the summer cottage, the same.based tractor does not idle.

If you at least once planted potatoes, then you know how difficult and tedious it is. And the planting by a walk.behind tractor, with the help of a hinged potato.resident, turns into, it cannot be said that pleasure, but at least not hard labor. Easy and fast.

Frozen to fight weeds

The motor.cultivator for weeding potatoes is equipped with such paws:

Weeding with paws is the most common way, due to the simplicity of design and efficiency. Setting paws does not require special knowledge and skills. When stored, they do not take up much space.

Paws carefully affect the soil during processing, without touching the root system of potatoes. When choosing a depth of processing, they are guided by the type of soil. For loose soil, depth 3-5 cm is suitable.

Dense soil requires deeper processing, but not too much. The optimal value is 6-8 cm. With deeper processing, the movement of the motor.cultivator is difficult.

Paws are attached to the unit with special holders. The width depends on the size of the furrow. Devices have a sharp part to the center of the row. So that the motor-cultivator does not get stuck in the ground, 1-2 paws are put a little behind the rest.

Inter.row processing potatoes with a walk.behind

During the growing season of potatoes, a special care is needed, which consists in loosening the soil between the rows. This process is called the inter.row processing of potatoes. Since potatoes are a string culture, the inter.row processing occurs by loosening of the soil, or hilling. When the soil loosening is carried out regularly, this allows you to accumulate soil moisture, destroy weeds and sets a full-fledged airborne regime for the root system of potatoes.

For better hijacking, the rows of potatoes are desirable to place at a distance of 70-90 cm. In industrial production, this width reaches 140 cm. With a larger width, a deeper hilling is carried out.

Thanks to this, the potatoes do not soak even when protracted rains, which reduces the degree of damage to wet rot and late blight. Also, irreparable harm can be avoided during the summer drought. For the first time, potato processing should be done 7-8 days after planting.

At this time, the soil forms a dense crust, not allowing the passage to appear. Processing is carried out twice before the emergence of seedlings, and twice. after. On average every 5-7 days. After the aisles are inaccessible, the processing is stopped. Inter.row processing can be performed both manually and mechanical methods.

Manual inter.row processing is carried out by Fokin with a plane cutter. If the potatoes are planted in small areas, then you can process the rowers with your hands. They are loosening when raised after rain or irrigation. With manual work, you use a chopper, a hoe and a rake. Fokin plane cutters are also used, since it is a lot of functional and ergonomic.

Mechanical inter.row processing is carried out by the cultivator of the soil, in the longitudinal direction. If the area is small, then the motoblocks are used. You can also combine with the interference processing by feeding, if you use additional devices and nozzles.

How to plow a walk.behind tractor in the winter and how it is useful?

As already mentioned, the soil processing by a might block is usually carried out in two stages: in the fall, at the end of all harvesting work on the site, and in the spring. immediately before landing cultures. Do not neglect the preparation of the Earth for winter, since, firstly, this will get rid of weeds, which, otherwise, will certainly deliver a lot of trouble to the sowing. And secondly, this allows you to loosen the soil before the loss of mass precipitation, providing moisture with proper drainage and not allowing lingering dampness, mold and bacteria harmful to plants.

Read also: finalizing racks for a drill

In autumn, a plowing plow by the motor unit can be very different from the region to the region, and this is regulated, first of all, by weather conditions. It is important to finish it to frosts, but, immediately after harvesting the crop with it, you should not rush. you need to wait for the weeds to mature and germinate, then their destruction will be most effective as possible. In our strip, as a rule, it is recommended to do this in November.

Several final councils and recommendations

As can be seen from the above, to master the plowing with the help of walk.behind shoes is quite easy. But, even experienced farmers have difficulties with this, if they do not previously take into account a number of important general nuances. First of all, errors may occur at the stage of choosing suitable technology for a particular task. So, small areas (up to six hundredths) of the Earth is better processed with light cultivators, in extreme cases, with a heavy walk.behind tractor use only special mills. If the weight of the unit reaches a centner, and its power is 10-12 liters.With., He easily cope with twenty hundredths, but, already with a plow, or with a separately connected cultivator. Heavy models are designed to work on one or two hectares, and a full-fledged hinged plow is already used here. In addition, the edges and areas of complex geometry are recommended in any version to treat with mills.

Of course, the use of mini-equipment in agricultural work slightly increases the cost of products as a result, but when comparing labor and time, it becomes clear that this increase with more than justifies itself.

How Do You Eat This Strange-Looking Vegetable?!

Cultivation is the processing of the land plot with an unauthorized method. If during the plowing of the plot with a walk.behind tractor the Earth is turned over with layers, then in the case of cultivation, only its loosening occurs to a certain depth, thereby the fertile layer of the soil remains in place, which ensures the receipt of a rich crop from the land.

The preservation of the resulting fertile layer is one of the main advantages of soil processing with milling stations, but there is one drawback here. If the cultivation of the land plot in preparation for the winter period is carried out by milling, not a plow, then in the spring after the snow gathering the earth will be compacted again, and you will have to re.start a single tractor and cultivate your land plot.

The cultivation of the walk.behind tractor after the winter period seems to be a complex process, especially if the plowing of the site was not previously plowed. The earth is compacted, and the load on the uniform tractor rises several times.

It is worth noting the fact that during the cultivation of cutters can have a different value of the deepening, so the quality of soil processing can be unsatisfactory. To achieve the maximum effect of the cultivation of the land plot, the following method of soil processing is used. If, after the winter period, first plow the plot to a depth of at least 10 cm, thereby loosening the upper compacted layer of the soil, then from the subsequent cultivation of the most positive result with the deepening of the milling cutter by 15-25 cm can be achieved from subsequent cultivation.

Let’s move on to a step.by.step study of the issue of how to use a walk.behind tractor to cultivate your land plot.

Frozen to fight weeds

The motor.cultivator for weeding potatoes is equipped with such paws:

Weeding with paws is the most common way, due to the simplicity of design and efficiency. Setting paws does not require special knowledge and skills. When stored, they do not take up much space.

НЕВОЗМОЖНО СДЕРЖАТЬ ЭМОЦИИ! СИЛЬНЕЙШАЯ ВОЕННАЯ ДРАМА! Отчий Берег / ANCESTRAL LAND (English Sub)

Paws carefully affect the soil during processing, without touching the root system of potatoes. When choosing a depth of processing, they are guided by the type of soil. For loose soil, depth 3-5 cm is suitable.

Dense soil requires deeper processing, but not too much. The optimal value is 6-8 cm. With deeper processing, the movement of the motor.cultivator is difficult.

Paws are attached to the unit with special holders. The width depends on the size of the furrow. Devices have a sharp part to the center of the row. So that the motor-cultivator does not get stuck in the ground, 1-2 paws are put a little behind the rest.

The benefits of hilling for potatoes

Potatoes are grown for the crop of tubers that are a modified shortened shoot. They develop on other types of underground elongated escape called the table. Plants with a root system of this type require special care.

For the normal development of tables with tubers, special conditions are needed:

  • sufficient moisture content of the soil;
  • good oxygen access;
  • suitable temperature;
  • Strong greens, additionally nourishing the root system.

Regular watering and pest protection will help in the care of potatoes, but to access oxygen and better warming of cornclub, it is necessary to hill overlooking.

Potato hilling helps to saturate the soil with oxygen and helps to increase productivity

The procedure contributes to the following processes:

  • increases the soil layer over the rhizome, which helps to maintain temperature and humidity;
  • Removes the crust, makes the earth more loose;
  • helps to “hide” tubers from sunlight to exclude the production of solanine;
  • Minimizes the growth of weeds.

To minimize the amount of time and labor spent when planting, weeding and hilling potatoes, it is recommended to use a single.axle tractor with special devices.

To choose a single tractor in accordance with your needs will help our material.

Nuances of cumping potatoes with a motor block with cummer

In order for the perch process to pass according to all the rules, some nuances must be observed.First of all, setting up and adjusting the device. Individual adjustment is required for each site, taking into account the characteristics of the soil, weather conditions, design and quality of sharpening of the working parts of the device. The technical characteristics of the walk.behind tractor also matter, therefore, before testing it on potato beds, a test on soil with similar parameters is carried out. Using a trial hood, you can understand what depth you need to immerse the unit, work out the angle of inclination, speed of movement and other important parameters.

After passing all the stages of setting, the uniform tractor will pass exactly along the given path, without touching potato plantations. Before adjusting the disc hirring, the unoic tractor is placed along the grooves with the desired angle of inclination and the width of the bed. The lower parts of the disks are pushed into a width of 50-70 cm, depending on the parameters of the landed row.

In addition, the angle of inclination is the mandatory value. Adjustable parts are installed symmetrically relative to each other. The equipment is installed on the site so that the furrow passes exactly between the discs, and the plants themselves remain untouched. When all preliminary work is completed, you can proceed directly to the processing.

Cumping of potatoes with a walk.behind clock

Installation of the cigarette light on a single tractor begins with the installation of a plow rack. It is inserted into a special castle and fixed with two bolts. The hitch is attached to the assembled unit and after that, the finished design is attached directly to the walk.behind tractor.

Device and principle of operation

The same tractor and cultivator are very similar, they work on gasoline and have handles to control. The basis is a strong metal frame, to which additional elements are attached. The main difference is the presence of a motor block of greater power and pneumatic tires. The cultivator is its simplified version with less weight.

Hellets on the walk.behind tractor are divided into several types. The disk version looks like a frame with two wheels, to which two disks are attached. It is fixed on the back of the unit. Racks make it possible to adjust the width of the cigarette light, changing the distance between the disks.

Plug.shaped model is also popular. It can be adapted for processing only one row or cope with simultaneously at once with two. The principle of operation of all these models is similar, but I exist and some differences. Double.row models during work can cause some difficulties in beginners. It is more difficult to manage them, it is better to use soil with a large diameter.

Basic rules for hilling

Enchanting is necessary for potatoes for better growth and development. Also, this procedure provides the plant with frost protection. For one season, potatoes should spill up to three times.

The first time the procedure is performed when the height of the plant reaches fifteen centimeters. When carrying out work, the layer of earth should be no more than ten centimeters. Otherwise, you can slow down the growth of the plant.

The second time hilling is carried out when the height of the plant reaches twenty.five centimeters. This is mainly happening two weeks after the first procedure.

The third time, hilling the plant, sprinkle the plant as high as possible. In this case, the earth should be moderately moist.

In this video, you will learn how to spill potatoes with a motor block:

So, it’s time to move directly to hilling. If you decide to do this manually, then the procedure may take about a day, the uno.based tractor Neva greatly simplifies this procedure. There are several types of cigns: disk, two.row pag.shaped and single.row pag.shaped. The rules for performing the procedure will depend on the choice of the device, since these cigns have different characteristics. We will consider all the technical parameters of the devices at the next paragraph, and now let’s talk about the rules for performing the process itself.

process, potatoes, walk, tractor

The first thing to do is install several baking powers before the device. Next, put the perch from behind, and you can proceed to processing.

The same.based tractor is installed between rows in the middle. Then turn on the minimum speed mode. Enchanting is carried out to the end of the row, then the motor.cultivator is deployed and the next row passes.

Important! Experts recommend hilling potatoes by the Neva motornote only once, immediately after planting, the following times are best done manually, in order to avoid damage to tubers.

The deadlines and rules of weeding

Weeding is the removal of weeds at the place of cultivation of agricultural culture. It is traditionally performed manually, but it is possible to use mechanical devices or chemicals that destroy unnecessary vegetation.

When planting sprouted tubers, it is properly weeding potatoes twice. First weeds are evenly littered 20 days after planting. At this time, they are still not well developed and they are easy to extract from the ground. At the same time, potato sprouts are already growing up to 5 cm long. Therefore, they can be distinguished from weeds.

The second weeding is carried out before opening flowers. The height of potato bushes during this period is from 20 to 30 cm. Typically, at the same time, plants can spill plants, while getting rid of weeds and raking small soil mounds around plants. Heling stimulates the development of the root system, provoking the growth of new roots from the green part of the stems. As a result, the delivery of nutrients improves, tuber formation is activated.

Important! If the potatoes were planted not sprouted, the sprouts appear later. Sometimes the ridges are completely overgrown with weeds, but there are no potato sprouts

Then the first time the weeding is carried out very carefully so as not to damage the germinating potatoes.

Fluffing potatoes during flowering in July does not harm plants. This procedure makes the garden cleaner and allows you to loosen the soil once again, improving the supply of the root system of flowering plants with air. But some gardeners believe that the procedure for lifting potatoes, when it blooms, is useless. After flowering, the bushes gain full strength and can independently suppress the growth of weeds.

Homemade mounting equipment for walk.behind engines

For medium and high.power motor blocks today, suppliers and manufacturers offer a huge number of attachments and devices that provide the mechanization of many operations. However, despite such attractive offers and ready.made options for the supply of sets, many owners prefer to make attachments for a walk.behind tractor with their own hands. And the reason is not that homemade products are cheaper. By no means, if you take the cost of materials, then this is absolutely wrong. The problem lies in another. Do.it.yourself inventory for a walk.behind tractor, for the most part, the tools are universally selected in terms of their qualitative parameters that meet the needs of a particular person.

This approach to the formation of a park of agricultural equipment makes it possible to take into account in the process of designing and assembling the inventory of all possible features of both the site and the owner himself.

The developed equipment for the unit is conditionally divided into equipment:

process, potatoes, walk, tractor
  • universal purpose;
  • highly specialized orientation;
  • auxiliary equipment and devices that allow you to simplify the control of the walk.behind tractor.

Universal means primarily include adapters and various trailers making the universal tractor with a universal transport platform both for cargo transportation and as a convenient vehicle. Separate models of motoblocks are capable of speed up to 25 km per hour. Although the comfort of the mini tractor is still far away, but walking is no longer on foot.

Highly specialized types of equipment are most often intended to perform only 1 or maximum 2 operations. However, it is precisely these are the most popular tools from the point of view of consumer qualities for high.quality soil processing, performing operations for caring for crops, feeding and even used in construction.

In part, it should be noted that among the self.destruction of special purpose, relatively simple types of tools. plows, mills, cummons prevail. This is what can be done from improvised materials and with the help of the simplest power tool. But more complex elements are made using units from other equipment.

And, of course, what facilitates control is a counterweight to the uniform tractor, wheel weights and anti.slip chains all this allows you to work with the unit all year round.

What is the famous potatoes

America is considered a historical homeland of potatoes, where the Indians consumed it for food. They called her “dad”, which apt enough reflects its essence. Vegetable getting into Europe is associated with the name Columbus. Later, from Europe, I got into potatoes thanks to Peter I. However, for a long time it was not eaten and used as a decorative decoration of gardens and gardens.

Currently, the described culture is one of the main. It is actively used in cooking (it can be prepared from it, both the first dishes and the second, or use it as a side dish). Some professionals can prepare more than 500 items of various dishes from the vegetable.

Potatoes contain a huge amount of nutrients that a person needs (patho, glucose, vitamin C and so on). At the same time, the vegetable is also used as a technical culture. in the process of processing, starch, potato alcohol are obtained from it (starch is generally the main element of cultural fruits), glue, some medicines.

Slaving potatoes with a walk.behind engineer

Growing vegetable does not require any significant labor costs. As a rule, he is, as a rule, a sufficiently natural amount of precipitation (watering for obtaining a quality crop is needed only during drought), top dressing is required only in case of incorrect selection of the site (violation of the crop rotation order) or if there are any soil features (excessive acidity, viscosity. high clay or sand and so on).

Regular weeding and hilling are needed, which can be very laborious with a large territory of its landing. In such a situation, it is recommended to use a tractor or motorized cultivator with mounting equipment. For harvesting, you can use a special digger in large areas.